The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Product functional features

1. Adopting 433MHz wireless communication technology, with a wireless operating distance of 100 meters.
2. Adopt automatic frequency hopping function and use 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhongchen, INVT, and . For brands
that are not compatible, please contact us for customization.
4. Ondersteuningsnelheidsregulering, begin, and current reading of large motor frequency converters.
5. Ondersteun linker- en regterbaanfrekwensie -omskakelingsnelheidsregulering, begin, front, agter, left and right control.
6. Support linear correction of left and right track frequency converters to keep the machine walking in a
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Product specifications

4. Product Function Introduction

Notes:
①Screen display:

②Mode switch:

③Enable:
Combination buttons, some operations require holding down the enable button for operation,see the instructions for each switch for details.
④Large motor switch:
Using a 3-speed reset switch, pulling this switch can control the forward and reverse rotation of the large motor. After releasing it, the state will remain, and there will be corresponding displays on the screen. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤Small motor forward/reverse switch:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Using a multi turn encoder knob, press the enable button, turn the knob right, and display the straight line correction: Df: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 unit; Turn left knob, straight line correction display: Df: On the right, every turn of the knob increases by 1 unit, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Using a 3-speed reset switch, when manually operated, the small motor can be controlled to turn left or right. Once released, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ Large motor speed regulation:
Using a multi turn encoder knob, rotating 1 grid each time, the speed value of the large motor changes by approximately 0.2 units. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Using a multi turn encoder knob, in manual mode, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 units, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 units. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. Product accessory diagram

6. Product Installation Guide
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the equipment to the receiver through wires.
3. After fixing the receiver, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for the best signal effect. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Finally, install the battery on the remote control, tighten the battery cover, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Receiver installation dimensions

6.3 Receiver Wiring Reference Diagram

7. Product operation instructions
7.1 Remote Control Parameter Settings
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, adjust the speed of the small motor to 25 on both sides, of 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 times;
Use the “Small Motor Speed Control” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, turn the page to the end,select “Save” to exit, and press the enable button to exit the menu;
The parameters are as follows:
Maximum current: feedback range of large motor current, set range 15-200A, default 100;
Speed control parameters: Automatic mode, small motor automatically accelerates faster or slower,the smaller the faster, set range 200-1500, default 800;
Deceleration parameter: Set the upper limit that allows the motor speed to change. When the current changes beyond this value, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, met 'n reeks van 05-12 and a default of 06;
Acceleration a1: The larger the motor speed, the faster it increases, met 'n reeks van 00-06 and a default of 01;
Deceleration a2: The larger the motor speed, the faster it decreases, met 'n reeks van 00-06 and a default of 02;
Enable speed regulation: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Start self-locking: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Maximum walking: maximum speed of left and right motors, range 10-100, default 50;
Cutting current: maximum cutting current, displayed on the screen as IC value, range 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Default speed limit: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatic mode: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 aan 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Maximum host: maximum speed of the large motor, range 10-100, default 50;
Mbus equipment (mandatory): Selection of large motor frequency converter model, range 00-03, default 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）
SBUS equipment (mandatory): Small motor frequency converter model selection, range 00-05, default 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）

04-Anchuanda 05-None

7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, and
the large motor frequency converter to 3
7.3 Remote Control Operation Instructions
1. Power on the machine, turn on the remote control, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (skip this step if the machine manufacturer has already set it);
2. Set the parameters of the frequency converter (skip this step if the machine manufacturer
has already set it);
3. Set the remote control to manual mode, and then use the remote control to move the machine to
the working position;
4. In manual mode, set the cutting current of the large motor to IC and the speed of the large motor
5. Switch to automatic mode and set the cutting speed limit F value for the small motor;
6. In automatic mode, turn the large motor switch to forward to start the large motor, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Product troubleshooting

9.Maintenance
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. If not used for a long time, please remove the battery and store the remote control and battery in a clean
and safe place.
6.During storage and transportation, attention should be paid to moisture and shock resistance.

10. Safety Information
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. If repair is required, please contact the manufacturer. If the damage is caused by self repair, the manufacturer
will not provide warranty.

Model: DH01R-4W-26K

Toepaslike toerusting:verskeie industriële toerusting

2.Produk bykomstighede diagram

Let wel: Jy kan een van die drie antennas kies. The suction cup antenna is standard by default.

3.Produk model beskrywing

Let wel:
① DH01R-reeks, as die agtervoegsel T bevat, dit beteken met noodstop-uitset;sonder T, it means without emergency stop output.

②As daar geen analoog uitset is nie, dit is nie nodig om 0W of 0R op te merk nie; die analooghoeveelhede W1, W2, W3, en W4 verstek na 0-10V analoog spanningsuitset; terselfdertyd, W1 en W2 kan uitgebrei word na 2 geïsoleerde digitale potensiometer uitsette, met 'n reeks van 0 -5K ohm, ½ watt; resolusie: 20 ohm. Die twee digitale potensiale kan gebruik word om die sweisstroom en sweisspanning van die sweismasjien te beheer. As die digitale potensiometer-uitset benodig word, user notes are required.

④Analoog invoer, wat wissel van 1 aan 2, wat aandui dat daar is 1 aan 2 Analoog insette(maksimum 2 kanale); wanneer daar 'n analoog inset is, jy moet let op die spanningsreeks van die analoog inset (ons ontvanger verstek na 0 -5V, die gebruiker kan ook opmerk as 4-20 mA of 0-10V, ens.) en die ooreenstemmende vertoonreeks van die analooghoeveelheid (byvoorbeeld: vertoon 0-100 volt of 0-1000 ampere)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Funksies

1） Maksimum 26 aflos uitsette;
2） Maksimum 4 kanale van analoog 0-10V uitset (Vertoonreeks kan aangepas word): steunstukke 2 kanale van uitgebreide geïsoleerde digitale potensiometer -uitset;
3）2 analoog insette; en op die afstandbeheer vertoon, Die vertoonreeks kan aangepas word
4）1 kanale van noodstop-relais-uitset normaalweg geslote kontakte;
5） Aangedryf deur 3 AA batterye, ontwerp met lae kragverbruik;
6） Draadlose werking afstand is 200 meter;
7） Beskermingsgraad IP67;
8） Met kruisskakelaarwerking, ondersteun twee 4-rigting kruisskakelaars;
9）Back strap design.

5.Afstandbeheer skakelaar beskrywing

6.Vertoon inhoud inleiding

W1 knopwaarde: W1: 0-1000 (parameter verstelbaar 0-9999)
W2 knopwaarde: W2: 0-5000 (parameter verstelbaar 0-9999)
W3 knopwaarde: W3: 0-5000 (parameter verstelbaar 0-9999)
W4 knop waarde: W4: 0-5000 (parameter verstelbaar 0-9999)
ADC1-terugvoerskerm: 0-1000 (parameter verstelbaar 0-5000)
ADC2-terugvoerskerm: 0-1000 (parameter verstelbaar 0-5000)

Lae spanning: Die afstandbeheerbattery is te laag, please replace the battery.

Netwerk het gedaal: Die draadlose sein word onderbreek. Kontroleer asseblief die krag van die ontvanger, skakel dit weer aan, and restart the remote control.

7.Bedryfsinstruksies vir afstandbeheerfunksie

1） Skakel die afstandbeheerder aan
Wanneer die ontvanger aangeskakel is, die ontvanger se werksaanwyser flikker; installeer twee AA-batterye in die afstandbeheer, skakel die kragskakelaar aan, en die skerm wys 'n waarde,wat suksesvolle opstart aandui. The receiver working indicator light becomes solid.
2） Skakelaar en knoppie funksies
Enige werking van die draaiskakelaar en knoppie op die afstandbeheerder kan die ooreenstemmende skakelaarseinuitsetpunt op die ontvanger beheer. Alle skakelsein-uitsetpunte op die ontvanger is normaalweg oop seine by verstek;
3）W1-W4 spoedaanpassing
Draai die knoppies in W1-W4 arbitrêr om die ooreenstemmende analoog uitsetsein of potensiometersein aan die ontvangerkant te laat werk. Die analoog uitsetsein by die ontvangerkant is verstek na 'n 0-10V spanningsein, en die potensiometersein is verstek na 0-5K;
4） Noodstopfunksie
Wanneer die noodstopknoppie gedruk word, alle skakelseinuitsette is ontkoppel en die analoog uitset is ontkoppel; nadat die noodstop vrygestel is, alle skakel seine word herstel en die analoog uitset word herstel; 5 sekondes nadat die afstandbeheer afgeskakel is, alle skakelseinuitsette word ontkoppel en die analooghoeveelhede bly onveranderd. Wanneer die afstandbeheer aangeskakel is, die skakel sein uitsette herstel outomaties;
5） Parameter spyskaart (gebruikers word verbied om dit privaat te wysig)
Sommige funksies van die afstandbeheerder kan deur parameters aangepas word. Wanneer die skerm W1=0, druk die K9-B-knoppie 3 keer in 'n ry, en druk dan die K9-A-knoppie 3 keer in 'n ry om die parameter kieslys te betree; K9-A en K9-B sleutel om deur die kieslys te blaai en parameters te kies; hou K1-A in, en druk dan die K9-A/B-knoppie om parameters te wysig;
Verlaat die parameter kieslys: kies om te stoor of nie te stoor nie, en druk dan die K1-A-knoppie om die uitgang te bevestig;
F1W1 reeks: Die vertoonreekswaarde van die W1-knoppie op die vertoonskerm, verstelbaar vanaf 0 aan 9999;
F2W2 reeks: Die vertoonreekswaarde van die W2-knoppie op die vertoonskerm, verstelbaar vanaf 0 aan 9999;
F3W3 reeks: Die vertoonreekswaarde van die W3-knoppie op die vertoonskerm, verstelbaar vanaf 0 aan 9999;
F4W4 reeks: Die vertoonreekswaarde van die W4-knoppie op die vertoonskerm, verstelbaar vanaf 0 to 9999
F5A1 reeks: Vertoon ADC1-terugvoervertoonreekswaarde, 0-5000 verstelbaar;
F6A2 reeks: Vertoon ADC2-terugvoervertoonreekswaarde, 0-5000 verstelbaar;
Alarmstroom: Stel die alarmwaarde vir ADC1 en ADC2 terugvoer vertoon. Wanneer ADC1 en ADC2 hierdie waarde oorskry, die afstandbeheerskerm sal alarm; wanneer hierdie waarde 0 is, is die alarmfunksie ongeldig;

8.Afstandbeheer elektriese eienskappe

9.Grootte van afstandbeheer

The final interpretation right of this product belongs only to our company.

Model: DH12S-P6S

Toepaslike toerusting:wire saw/blade saw machine

2.Produk bykomstighede diagram

Let wel: Jy kan een van die drie antennas kies. The suction cup antenna is standard by default.

3.Afstandbeheer skakelaar beskrywing

4.Displaycontent introduction

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(parameters adjustable)
Automatic cutting main motor setting current: Setting: 28 (parameters adjustable)
Swing arm motor speed: Swing: 0-50

Lae spanning: Die afstandbeheerbattery is te laag, please replace the battery.

Netwerk het gedaal: Die draadlose sein word onderbreek. Kontroleer asseblief die krag van die ontvanger, skakel dit weer aan, and restart the remote control.

5.Bedryfsinstruksies vir afstandbeheerfunksie

1）Turn on the remote control

Wanneer die ontvanger aangeskakel is, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; installeer twee AA-batterye in die afstandbeheer, skakel die kragskakelaar aan, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to forward, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to reverse, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, turn the “Forward/Reverse” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Turn the “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Press and hold the “speed adjustment enable” button and rotate the “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “forward/reverse” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (users are prohibited from modifying it without permission)

Enter the parameter menu:In manual mode, when the main motor speed is 0, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enterthe parameter menu;
Verlaat die parameter kieslys: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, default 800, unit milli second,modification is prohibited;
Deceleration parameter: When the cutting current change value exceeds this value, rapid deceleration begins, unit Ampere;
Acceleration a1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Deceleration a2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, modification is prohibited;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, modification is prohibited;
Maximum current: The range of main motor feedback current, unit Ampere;
Maximum host: Remote control main motor speed adjustment display range;
Maximum walking: Invalid parameter;
Speed limit offset: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Automatic cutting, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;unit: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Afstandbeheer elektriese eienskappe

7.Grootte van afstandbeheer

The final interpretation right of this product belongs only to our company.

Model: DH12S-LD

Toepaslike toerusting:crawler wire saw machine

Produk bykomstighede diagram

Let wel: Jy kan een van die drie antennas kies. The suction cup antenna is standard by default.

Afstandbeheer skakelaar beskrywing

Displaycontent introduction

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (parameters adjustable)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)

Lae spanning: Die afstandbeheerbattery is te laag, please replace the battery.

Netwerk het gedaal: Die draadlose sein word onderbreek. Kontroleer asseblief die krag van die ontvanger, skakel dit weer aan, and restart the remote control.

Bedryfsinstruksies vir afstandbeheerfunksie

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, skakel die kragskakelaar aan, andthe display will show the motor speed, indicating successful startup.

2.Large motor and speed regulation

Turn the “forward/reverse” switch to forward, the receiver’s large motor will turn on, and the display will show forward

Turn the “forward/reverse” switch to reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse

Rotate the “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “forward/reverse” switch to forward, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Turn the “Forward/Reverse” switch to reverse, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Turn the “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Turn the “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

In manual mode:
Turn left in place: Press and hold the “Enable” button, turn the “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Press and hold the “Enable” button, turn the “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

In automatic mode: press and hold the “Enable” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Automatic cutting

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: In manual mode, press and hold the “Enable” button and rotate the “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 aan 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (users are prohibited from modifying it without permission)

Sommige funksies van die afstandbeheerder kan deur parameters aangepas word. In manual mode, when the small motor speed S2 is 10, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enter the parameter menu;
Verlaat die parameter kieslys: kies om te stoor of nie te stoor nie, then press the enable button to confirm the exit;
Maximum current: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, default 800, modification is prohibited;
Deceleration parameter: automatic cutting control parameter. When the cutting current change value exceeds this value,deceleration begins.
Acceleration a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maximum walking: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Speed limit offset: the maximum speed of the small motor during automatic cutting.
Maximum host: maximum speed of large motor.

Afstandbeheer elektriese eienskappe

Grootte van afstandbeheer

The final interpretation right of this product belongs only to our company.