The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. የምርት ተግባራዊ ባህሪዎች

1. Adopting 433MHz wireless communication technology, ሽቦ አልባ በሆነ የስራ ማስገቢያ ርቀት 100 meters.
2. Adopt automatic frequency hopping function and use 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:ሻንጋይ xelien, ፉጂ, Huichuan, Zhonngen, ግብይት, እና . For brands
that are not compatible, please contact us for customization.
4. የድጋፍ ፍጥነት ደንብ, የሚጀምረው, and current reading of large motor frequency converters.
5. ግራ እና ቀኝ ትራክ ድግግሞሽ የፍጥነት ደንብ, የሚጀምረው, ፊት ለፊት, ተመለስ, left and right control.
6. የግራ እና የቀኝ ዱካ ማስተካከያዎች የግራ እና የቀኝ ዱካ ድግግሞሽ ሽግግሮዎች በ A ውስጥ እንዲራመዱ ለማድረግ
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. የምርት ዝርዝሮች

4. የምርት ተግባር መግቢያ

ማስታወሻዎች:
① ሴሬይን ማሳያ:

②modo ቀይር:

③Enable:
ጥምረት አዝራሮች, አንዳንድ ክወናዎች ለሠራተኛ እንቅስቃሴን አንቃውን ማንቃት ይፈልጋሉ,see the instructions for each switch for details.
④Large motor switch:
የ 3-ፍጥነት ዳግም ማስጀመሪያ ማብሪያ / ማጥፊያ በመጠቀም, ይህንን ማብሪያ / ማጥፊያ / ትላልቅ ሞተር / ወደፊት የሚሽከረከር እና የተቃዋሚ ማሽከርከር ይችላል. ከለቀቀ በኋላ, ግዛቱ ይቀራል, በማያ ገጹ ላይ የሚዛመዱ ማሳያዎች ይኖራሉ. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤small ሞተር ወደ ፊት / ተከላካይ ማብሪያ:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
ባለብዙ ማዞሪያ ኢንዱክስ ማንጠልጠያ በመጠቀም, press the enable button, turn the knob right, and display the straight line correction: DF: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 ክፍል; ወደ ግራ ሹራብ ያዙሩ, ቀጥ ያለ መስመር ማስተካከያ ማሳያ: DF: On the right, every turn of the knob increases by 1 ክፍል, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
የ 3-ፍጥነት ዳግም ማስጀመሪያ ማብሪያ / ማጥፊያ በመጠቀም, እራስዎ ሲሠራ, ትንሹ ሞተር ወደ ግራ ወይም ወደ ቀኝ ለመዞር ሊቆጣጠር ይችላል. አንዴ ተለወጠ, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ ትላልቅ የሞተር ፍጥነት ደንብ:
ባለብዙ ማዞሪያ ኢንዱክስ ማንጠልጠያ በመጠቀም, rotating 1 በእያንዳንዱ ጊዜ ፍርግርግ, በትላልቅ የሞተር ለውጦች የፍጥነት ዋጋ በግምት 0.2 አሃዶች. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
ባለብዙ ማዞሪያ ኢንዱክስ ማንጠልጠያ በመጠቀም, በእጅ ሞድ ውስጥ, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 አሃዶች, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 አሃዶች. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. የምርት ተካፋይ ሥዕላዊ መግለጫ

6. የምርት መጫኛ መመሪያ
6.1 የምርት ጭነት ደረጃዎች
1. ተቀባዩ በጀርባው ላይ በተቀባዩ የኤሌክትሪክ ካቢኔ ውስጥ ይጫኑት, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. የእኛን ተቀባዩ የሽቦ ንድፍ ማውጫውን ይመልከቱ እና ከጣቢያዎ መሣሪያዎችዎ ጋር አነፃፅረው. Connect the equipment to the receiver through wires.
3. ተቀባዩን ካስተካከሉ በኋላ, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. ለበለጠ የምልክት ውጤት በኤሌክትሪክ ካቢኔ አናት ላይ እንዲያስቀምጠው ይመከራል. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. በመጨረሻ, install the battery on the remote control, የባትሪውን ሽፋን ጠብቅ, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 የመቀበያ ጭነት መጠባበቂያ ልኬቶች

6.3 የተቀባዩ የሽቦ ንድፍ ንድፍ

7. የምርት ኦፕሬሽን መመሪያዎች
7.1 የርቀት መቆጣጠሪያ መለኪያ ቅንብሮች
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, የአነስተኛ የሞተር ፍጥነትን ፍጥነት ያስተካክሉ 25 on both sides, ወይም 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 ጊዜያት;
ይጠቀሙ “አነስተኛ የሞተር ፍጥነት ቁጥጥር” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, ወደ መጨረሻው ገጹን ያዙሩ,ይምረጡ “Save” to exit, and press the enable button to exit the menu;
ግቤቶች እንደሚከተለው ናቸው:
ከፍተኛ ወቅታዊ: feedback range of large motor current, set range 15-200A, ነባሪ 100;
የፍጥነት መቆጣጠሪያ መለኪያዎች: ራስ-ሰር ሁኔታ, small motor automatically accelerates faster or slower,በጣም በፍጥነት ትንሹ, set range 200-1500, ነባሪ 800;
የማታለያ መለኪያ: Set the upper limit that allows the motor speed to change. አሁን ካለው እሴት ባሻገር የወቅቱ ለውጦች, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, with a range of 05-12 and a default of 06;
ማፋጠን A1: The larger the motor speed, the faster it increases, with a range of 00-06 and a default of 01;
ማታለያ A2: The larger the motor speed, the faster it decreases, with a range of 00-06 and a default of 02;
የፍጥነት ደንብ ያንቁ: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
ራስን መቆጠብ ይጀምሩ: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
ከፍተኛ መራመድ: maximum speed of left and right motors, ክልል 10-100, ነባሪ 50;
የአሁኑን መቁረጥ: maximum cutting current, displayed on the screen as IC value, ክልል 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
ነባሪ የፍጥነት ወሰን: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
ራስ-ሰር ሁኔታ: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 ለ 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
ከፍተኛ አስተናጋጅ: maximum speed of the large motor, ክልል 10-100, ነባሪ 50;
Mbus equipment (አስገዳጅ): Selection of large motor frequency converter model, ክልል 00-03, ነባሪ 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, ሮቢኮን)
Sbus መሣሪያዎች (አስገዳጅ): አነስተኛ የሞተር ድግግሞሽ መለወጫ መለወጫ ሞዴል ምርጫ, ክልል 00-05, ነባሪ 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, ሮቢኮን)

04-አንኩዋንዳ 05 - ምንም

7.2 ድግግሞሽ መለወጫ ቅንጅት ቅንጅት
1. የትእዛዝ ምንጭ ምርጫ: የግንኙነት ትዕዛዝ ሰርጥ
2. ዋና ድግግሞሽ ምንጭ ምርጫ: ግንኙነት ተሰጥቷል
3. የባድድ መጠን: 19200
4. የውሂብ ቅርጸት: ማረጋገጫ የለም, የውሂብ ቅርጸት<8-N-1>
5. አካባቢያዊ አድራሻ: የግራ ድግግሞሽ መለያን ወደ 1, የቀኝ ድግግሞሽ ለ 2, እና
the large motor frequency converter to 3
7.3 የርቀት መቆጣጠሪያ ክወና መመሪያዎች
1. በማሽኑ ላይ ኃይል, የርቀት መቆጣጠሪያውን ያብሩ, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (ማሽኑ አምራቹ ቀድሞውኑ ካዋቀረው ይህንን እርምጃ ዝለል);
2. የግድግዳ ወረቀቱን መለኪያዎች ያዘጋጁ (skip this step if the machine manufacturer
has already set it);
3. የርቀት መቆጣጠሪያን ወደ መመሪያው ሁኔታ ያዘጋጁ, and then use the remote control to move the machine to
the working position;
4. በእጅ ሞድ ውስጥ, set the cutting current of the large motor to IC and the speed of the large motor
5. ወደ አውቶማቲክ ሁኔታ ቀይር እና የመቁረጥ የፍጥነት ገደብ f እሴት ለአነስተኛ ሞተር ዋጋ ያዘጋጁ;
6. በራስ-ሰር ሁኔታ ውስጥ, ትልቁን ሞተር ለመጀመር ትልቁ የሞተር መቀየሪያ ያዙሩ, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.የምርት መላ ፍለጋ

9.ጥገና
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. ለረጅም ጊዜ ጥቅም ላይ የማይውል ከሆነ, please remove the battery and store the remote control and battery in a clean
and safe place.
6.በማጠራቀሚያው እና በመጓጓዣ ወቅት, attention should be paid to moisture and shock resistance.

10. የደህንነት መረጃ
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. ጥገና ከተጠየቀ, እባክዎን አምራቹን ያነጋግሩ. ጉዳቱ የሚከሰት ከሆነ በግለሰቦች ጥገና ከተከሰተ, the manufacturer
will not provide warranty.

ሞዴል: DH01R-4W-26K

የሚመለከታቸው መሣሪያዎች:various industrial equipment

2.የምርት መለዋወጫዎች ሥዕላዊ መግለጫዎች

ማስታወሻ: ከሶስት አንቴናስ ውስጥ አንዱን መምረጥ ይችላሉ. The suction cup antenna is standard by default.

3.Product model description

ማስታወሻ:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 ለ 2, indicating that there are 1 ለ 2 አናሎግ ግብዓቶች(maximum 2 ሰርጦች); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, ወዘተ) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.ባህሪዎች

1）Maximum 26 አጫጫን የወጪ ወጪዎች;
2）Maximum 4 የአናሎግ ሰርጦች 0-10V ውፅዓት (የማሳያ ክልል ሊበጁ ይችላል): ድጋፎች 2 የተራዘሙ የተራዘመ የዲጂታል ፖድሪሜትር ማውጫ ውፅዓት;
3）2 analog inputs; እና በርቀት መቆጣጠሪያ ላይ ይታያል, ማሳያው ክልል ሊበጁ ይችላሉ
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA ባትሪዎች, low power consumption design;
6） Wireless operation distance is 200 ሜትር;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.የርቀት መቆጣጠሪያ መቆጣጠሪያ መግለጫ

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

ዝቅተኛ voltage ልቴጅ: የርቀት መቆጣጠሪያ ባትሪ በጣም ዝቅተኛ ነው, please replace the battery.

አውታረ መረብ ወረደ: ገመድ አልባ ምልክቱ ተቋር is ል. እባክዎ ተቀባዩን ኃይል ያረጋግጡ, እንደገና አብራ, and restart the remote control.

7.የርቀት መቆጣጠሪያ ተግባር አሠራር መመሪያዎች

1） Turn on the remote control
ተቀባዩ በሚጥልበት ጊዜ, the receiver working indicator flashes; በርቀት መቆጣጠሪያ ውስጥ ሁለት AA ባትሪዎችን ይጫኑ, የኃይል ማብሪያውን ማብራት, and the display shows a value,ስኬታማ ጅምርን የሚያመለክቱ. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
የአደጋ ጊዜ ማቆሚያ ቁልፍ ሲጫን, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
የርቀት መቆጣጠሪያዎች አንዳንድ ተግባሮች በግቤት ማሻሻያዎች ሊስተካከሉ ይችላሉ. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
ከፓኬት ምናሌው ውጣ: ለማስቀመጥ ወይም ለማዳን ይምረጡ, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 ለ 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 ለ 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 ለ 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;

8.የርቀት መቆጣጠሪያ ኤሌክትሪክ ባህሪዎች

9.የርቀት መቆጣጠሪያ መጠን

The final interpretation right of this product belongs only to our company.

ሞዴል: DH12s-P6s

የሚመለከታቸው መሣሪያዎች:ሽቦ የተከለከለ / Blade Shey ማሽን

2.የምርት መለዋወጫዎች ሥዕላዊ መግለጫዎች

ማስታወሻ: ከሶስት አንቴናስ ውስጥ አንዱን መምረጥ ይችላሉ. The suction cup antenna is standard by default.

3.የርቀት መቆጣጠሪያ መቆጣጠሪያ መግለጫ

4.የማሳያ ማስተዋወቂያ

ዋና የሞተር ፍጥነት: ዋና: 0-50
ተጓዥ የሞተር ፍጥነት: መስመር: 0-50
የመርፌት የመርከብ ሞተር ከፍተኛው የፍጥነት ወሰን: ፍጥነት: 0-30
(መለኪያዎች የሚስተካከሉ)
አውቶማቲክ የመቁረጥ ዋና የሞተር ቅንብሮች የአሁኑ: ማቀናበር: 28 (መለኪያዎች የሚስተካከሉ)
የአድራክ ሙቀት ፍጥነት: ማወዛወዝ: 0-50

ዝቅተኛ voltage ልቴጅ: የርቀት መቆጣጠሪያ ባትሪ በጣም ዝቅተኛ ነው, please replace the battery.

አውታረ መረብ ወረደ: ገመድ አልባ ምልክቱ ተቋር is ል. እባክዎ ተቀባዩን ኃይል ያረጋግጡ, እንደገና አብራ, and restart the remote control.

5.የርቀት መቆጣጠሪያ ተግባር አሠራር መመሪያዎች

1) የርቀት መቆጣጠሪያውን ያብሩ

ተቀባዩ በሚጥልበት ጊዜ, ተቀባዩ ላይ የ D2 የኃይል መብራት ሁል ጊዜ በርቷል, እና የዲ 1 ምልክት መብራት መብራት ይጀምራል; በርቀት መቆጣጠሪያ ውስጥ ሁለት AA ባትሪዎችን ይጫኑ, የኃይል ማብሪያውን ማብራት, እና ማሳያው የሞተር ፍጥነት ያሳያል, indicating successful startup.

2) ትልቅ የሞተር እና ፈጣን ደንብ / ዋና የሞተር እና ፍጥነት ደንብ

ተጭነው ይቆዩ “የፍጥነት ደንብ አንቃ”, ያዙሩ “ወደፊት / ተግቶራግ” ወደ ፊት ይቀይሩ, ተቀባዩ ዋና ሞተር ያብሩ;
ተጭነው ይቆዩ “የፍጥነት ደንብ አንቃ”, ያዙሩ “ወደፊት / ተግቶራግ” ወደ ተቃራኒው ይቀይሩ, ተቀባዩ ዋና ሞተር ይቀየራል እና ያበራል;በቀላሉ ወደ መሃል ወይም ወደ ተቃራኒ አቅጣጫ አቅጣጫውን ያንቀሳቅሱ, የፍጥነት መቆጣጠሪያን አንቃ ቁልፍን አንቃ ሲጫን ዋናው ሞተር ወዲያውኑ ወዲያውኑ ያቆማል;አሽከረክር “ትልቅ ሞተር” የተቀባዩ ዋና የሞተር ሞተር ላልተኙን ወደ 0-10ቪ የተቀባው የሞተር ደንብ የ Vol ልቴጅን ለማስተካከል ማቆያ;

3) የጉዞ ሞተር

ተጭነው ይቆዩ “የፍጥነት ማስተካከያ አንቃ”, ያዙሩ “ወደፊት / ተግቶራግ” ወደ ፊት ወይም ወደ ኋላ ይለውጡ, እና የመራመዱ ሞተር በከፍተኛ ፍጥነት ይንቀሳቀሳል 50;

4) የማንሸራተት ክንድ ሞተር እና የፍጥነት ደንብ

ያዙሩ “ክንድ / ተቃዋሚዎች” ወደ ማዋሃድ ክንድ ወይም መሸሸጊያ ቀይር, እና ተቀባዩ የማሽኮርመም ክንድ ሞተር ይጀምራል; ከዚያ ያሽከርክሩ “የፍጥነት ማስተካከያ” የማዋያድ የአድራክ ሞተር ፍጥነትን ለማስተካከል;

ተጭነው ይቆዩ “የፍጥነት ማስተካከያ አንቃ”, እና ከዚያ ይጎትቱ “ክንድ / ተቃዋሚዎች” ቀይር, የማንሸራተት የክንድ ሞተር በከፍተኛ ፍጥነት ይንቀሳቀሳል 50;

5) የጉዞ የሞተር ፍጥነት ገደብ ማስተካከያ

ተጭነው ይያዙ “የፍጥነት ማስተካከያ አንቃ” አዝራር እና አሽከርክር “የፍጥነት ማስተካከያ” በአውቶማቲክ መቆረጥ ወቅት የጉዞ ሞተርን ከፍተኛው የፍጥነት ወሰን ለማስተካከል;

6) ራስ-ሰር መቁረጥ

የመጀመሪያው እርምጃ ዋናውን ሞተር መጀመር ነው; ሁለተኛው እርምጃ የመራመጃውን ሞተር ከፍተኛው የፍጥነት ገደቡን ማስተካከል ነው; ሦስተኛው እርምጃ ማንቀሳቀስ ነው “ወደፊት / ተግቶራግ” ራስ-ሰር የመቁረጫ ሁነታን ለማስገባት ወደ ፊት ወይም ወደ ኋላ ይለውጡ;

7) ልኬት ምናሌ (ተጠቃሚዎች ያለፍቃድ ከማሻሻል የተከለከለ ነው)

የመለኪያ ምናሌውን ያስገቡ:በእጅ ሞድ ውስጥ, ዋናው የሞተር ፍጥነት በሚሆንበት ጊዜ 0, በተከታታይ ሶስት ጊዜ ወደፊት / ተከላካይ ወደታች ይለውጡ, እና ከዚያ በተከታታይ ወደ ኢንተርናሽናል ምናሌ ውስጥ ሶስት ጊዜ ወደታች ይግፉት;
ከፓኬት ምናሌው ውጣ: የፍጥነት ማስተካከያውን ማንጠልጠል, አስቀምጥ ወይም ሳያቀምስ ይምረጡ, እና ለማረጋገጥ የተዘበራረቀ ቁልፍን ይጫኑ;
ወቅታዊ: ዋናው የሞተር ወቅታዊ ዋጋ ከፍተኛው እሴት, አሃድ አሚር;
የፍጥነት ማስተካከያ መለኪያዎች: ራስ-ሰር የመቁረጥ ቁጥጥር መለኪያዎች, ነባሪ 800, አሃድ ሚሊይ ሁለተኛ,ማሻሻል የተከለከለ ነው;
የማታለያ መለኪያ: የወቅቱ ለውጥ ዋጋን ከመለካከት የሚበልጥ ከሆነ, ፈጣን ማታለያ ይጀምራል, አሃድ አሚር;
ማፋጠን A1: የመቁረጫ ወቅታዊው ከአሁኑ የመቁረጫ ወቅታዊ ከሆነ, the speed value increased by each acceleration of the walking motor;
ማታለያ A2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, ማሻሻል የተከለከለ ነው;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, ማሻሻል የተከለከለ ነው;
ከፍተኛ ወቅታዊ: The range of main motor feedback current, አሃድ አሚር;
ከፍተኛ አስተናጋጅ: Remote control main motor speed adjustment display range;
ከፍተኛ መራመድ: Invalid parameter;
የፍጥነት ወሰን ማካካሻ: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: ራስ-ሰር መቁረጥ, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;ክፍል: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.የርቀት መቆጣጠሪያ ኤሌክትሪክ ባህሪዎች

7.የርቀት መቆጣጠሪያ መጠን

The final interpretation right of this product belongs only to our company.

ሞዴል: DH12s-eld

የሚመለከታቸው መሣሪያዎች:የ CRAWLER ሽቦ የተመለከተ ማሽን

የምርት መለዋወጫዎች ሥዕላዊ መግለጫዎች

ማስታወሻ: ከሶስት አንቴናስ ውስጥ አንዱን መምረጥ ይችላሉ. The suction cup antenna is standard by default.

የርቀት መቆጣጠሪያ መቆጣጠሪያ መግለጫ

የማሳያ ማስተዋወቂያ

ትልቅ የሞተር ፍጥነት：S1：0-50
አነስተኛ የሞተር ፍጥነት: S2: 0-50
ሊልስሌልላይን ሾት ጩኸት:ረ:0-30(መለካት የማይቻል)
ከፍተኛ የአሁኑን የመቁረጥ ራስ-ሰር መቁረጥ: አይ: 0-35 (መለኪያዎች የሚስተካከሉ)
መስመራዊ ማስተካከያ እሴት: DF: -99-99 (1 ክፍል 0.02V ያህል ነው)

ዝቅተኛ voltage ልቴጅ: የርቀት መቆጣጠሪያ ባትሪ በጣም ዝቅተኛ ነው, please replace the battery.

አውታረ መረብ ወረደ: ገመድ አልባ ምልክቱ ተቋር is ል. እባክዎ ተቀባዩን ኃይል ያረጋግጡ, እንደገና አብራ, and restart the remote control.

የርቀት መቆጣጠሪያ ተግባር አሠራር መመሪያዎች

1.የርቀት መቆጣጠሪያውን ያብሩ

ሲገፋው, በተቀባዩ ላይ ያለው የ RF-LED መብራቱ መበላሽ ይጀምራል;ሁለት ኤኤንኤኢዲዎችን በ Shariciver e የርቀት መቆጣጠሪያ ውስጥ ይጭኑ, የኃይል ማብሪያውን ማብራት, ማሳያው የሞተር ፍጥነት ያሳያል, indicating successful startup.

2.ትልቅ የሞተር እና ፈጣን ደንብ

ያዙሩ “ወደፊት / ተግቶራግ” ወደ ፊት ይቀይሩ, ተቀባዩ ትላልቅ ሞተር ያብሩ, እና ማሳያው ወደፊት ይታያል

ያዙሩ “ወደፊት / ተግቶራግ” ወደ ተቃራኒው ይቀይሩ, ተቀባዩ ትልቁ ሞተር በተቃራኒው ይቀይረዋል, እና ማሳያው ተቃራኒውን ያሳያል

አሽከረክር “ትልቅ የሞተር ፍጥነት ማስተካከያ” ተቀባዩ ትላልቅ የሞተር ፍጥነት ማስተካከያ የውጤት Vol ልቴጅ 0-10v;

3.አነስተኛ የሞተር እና ፈጣን ደንብ

ውሰድ “ወደፊት / ተግቶራግ” ወደ ፊት ይቀይሩ, የተቀባዩ ተጓዳኝ ወደፊት እና ቀኝ ጎማ ወደፊት ተያይ attached ል, እና ማሳያው ወደፊት ያሳያል

ያዙሩ “ወደፊት / ተግቶራግ” ወደ ተቃራኒው ይቀይሩ, የተቀባዩ የግራ ጎማው ተቃራኒው ተቃራኒ እና የቀኝ ጎማ ተቃዋሚዎች በርተዋል, እና ማሳያው ተቃራኒ መሆኑን ያሳያል

4.ወደ ግራ እና ቀኝ ይታጠፉ

ያዙሩ “ግራ / ቀኝ” ወደ ግራ ቀይር, የተቀባዩ የቀኝ ጎማው ወደፊት ይርቃል እና ያበራል,እና ማሳያው ግራ ይታያል

ያዙሩ “ወደ ግራ / ቀኝ ይታጠፉ” ወደ ቀኝ ወደ ቀኝ ቀይር, የቀባው ግራ ጎማ ያስተላልፋል እና ያበራል, እና ማሳያው ወደ ቀኝ ይታያል

5.ቦታውን ያብሩ

በእጅ ሞድ ውስጥ:
በቦታው ውስጥ ወደ ግራ ይታጠፉ: ተጭነው ይያዙ “አንቃ” አዝራር, ያዙሩ “ግራ / ቀኝ ማዞሪያ” ወደ ግራ ቀይር, የግራ ጎማ ወደ ኋላ እና ተጓዳኙ ወደፊት ተጓዳኝ ጎማ በርቷል,እና በቦታው ውስጥ ወደ ግራ ማዞር ይጀምሩ;

በቀጥታ በቦታው ላይ ያዙሩ: ተጭነው ይያዙ “አንቃ” አዝራር, ያዙሩ “ግራ / ቀኝ ማዞሪያ” ወደ ቀኝ ቀይር, የቀባው ተጓዳኝ ወደ ፊት እና ቀኝ ጎማው ተቃራኒው በርቷል, እና ተቀባዩ ወደ ቦታው መለወጥ ይጀምራል;

6.አነስተኛ የሞተር ፍጥነት ገደብ ማስተካከያ

በራስ-ሰር ሁኔታ ውስጥ: ተጭነው ይያዙ “አንቃ” አዝራር እና አሽከርክር “አነስተኛ የሞተር ፍጥነት ማስተካከያ” በአውቶማቲክ መቆራረጥ ወቅት አነስተኛ የሞተር ፍጥነትን ከፍተኛው ፍጥነት ለማስተካከል;

7.ራስ-ሰር መቁረጥ

የመጀመሪያው እርምጃ ትልቁ ሞተር መጀመር ነው; ሁለተኛው እርምጃ ሁነታን ለመቀየር ወደ “ራስ-ሰር”; ሦስተኛው እርምጃ ትንሹ ሞተር መጀመር ነው እና ማያ ገጹን ያሳያል “ራስዎን መቁረጥ”,በራስ-ሰር የመቁረጥ ሁኔታ እንደገባ ያመለክታል;

8. ቀጥ ያለ መስመር ማስተካከያ

ግራ እና ቀኝ በእግር ጉዞ ሞተሮች ወደ ፊት እና ወደ ኋላ ሲጓዙ, የግራ እና የቀኝ ፍጥነት ወጥነት የለውም, እና ቀጥ ያለ መስመር የሚራመዱ ተመራማሪዎች. የርቀት መቆጣጠሪያውን የግራ መቆጣጠሪያውን የግራ እና የቀኝ ጎማዎችን ፍጥነት ለማስተካከል የርቀት መቆጣጠሪያ ተግባርን መጠቀም ይችላሉ;
እርማት መርህ: በእርዳታ ተግባሩ በኩል, የግራ ጎማ ፍጥነት እንደ ትክክለኛው ፍጥነት ተመሳሳይ ፍጥነትን ለመድረስ የተስተካከለ ነው, የግራ እና የቀኝ ጎማዎችን ፍጥነት ለማመሳሰል እና መጎናጸፊያውን ያስወግዳል;
የመረበሽ ማስተካከያ ዘዴ ዘዴ: በእጅ ሞድ ውስጥ, ተጭነው ይያዙ “አንቃ” አዝራር እና አሽከርክር “አነስተኛ የሞተር ፍጥነት ደንብ”;
የግራ ተሽከርካሪ ፍጥነት voltage ልቴጅ voltage ልቴጅ እና በማሳያ ማያ ገጽ ላይ ያለውን የማስተካከያ ዋጋ እንዲጨምር ለማድረግ በሰዓት አቅጣጫ ይሽከረከሩ;
የግራ ተሽከርካሪ ፍጥነት vol ልቴጅ voltage ልቴጅ እና የማሳያ ማስተካከያ ዋጋ ለመቀነስ የተቆራረጠ;
የማስተካከያ ክልል: እርማት ዋጋ -90 ለ 90; የአንድ እርማት አሃድ አካል (መለኪያ) የ voltage ልቴጅ 0.02V ነው;

9. መለኪያ ምናሌ (ተጠቃሚዎች ያለፍቃድ ከማሻሻል የተከለከለ ነው)

የርቀት መቆጣጠሪያዎች አንዳንድ ተግባሮች በግቤት ማሻሻያዎች ሊስተካከሉ ይችላሉ. በእጅ ሞድ ውስጥ, ትንሹ የሞተር ፍጥነት S2 በሚሆንበት ጊዜ 10, በተከታታይ ሶስት ጊዜ ወደፊት / ተከላካይ ወደታች ይለውጡ, እና ወደ ግቤት ምናሌ ውስጥ ለማስገባት በተከታታይ ሶስት ጊዜ ወደታች ይግፉት;
ከፓኬት ምናሌው ውጣ: ለማስቀመጥ ወይም ለማዳን ይምረጡ, ከዚያ መውጫውን ለማረጋገጥ የተቃውሉ ቁልፍን ይጫኑ;
ከፍተኛ ወቅታዊ: የመቁረጫ ሞተር የአሁኑ ተቀጣሪነት የተሰጠው ነው 80% የዚህ ተወዳጅነት;
የፍጥነት መቆጣጠሪያ መለኪያዎች: ራስ-ሰር የመቁረጥ ቁጥጥር መለኪያዎች, ነባሪ 800, ማሻሻል የተከለከለ ነው;
የማታለያ መለኪያ: ራስ-ሰር የመቁረጥ ቁጥጥር ግቤት. የወቅቱ ለውጥ ዋጋን ከመለካከት የሚበልጥ ከሆነ,deceleration begins.
ማፋጠን A1: ራስ-ሰር የመቁረጥ ቁጥጥር ግቤት, የመቁረጫ ወቅታዊው ከአሁኑ የመቁረጫ ወቅታዊ ከሆነ, የማፋጠን ፍጥነት;
ማታለያ A2: ራስ-ሰር የመቁረጥ ቁጥጥር ግቤት, የመቁረጫ ወቅታዊው ከተቀናጀው ከፍ ያለ ከሆነ
የአሁኑን መቁረጥ, የማታለል ፍጥነት;
ራስ-ሰር ቢላዋ ግምገማ: ልክ ያልሆነ;
ራስን መቆጠብ ይጀምሩ: 0, ራስን መቆለፍ የለም; 1, ራስን መቆጠብ. የቃላቱን ቁልፍ ተጫን + forward and reverse to take effect and self-lock.
ከፍተኛ መራመድ: the maximum speed of the small motor.
የአሁኑን መቁረጥ: ዋና ዋናውን የሞተር አውቶማቲክ አውቶማቲክ ማቅረቢያ ያዘጋጁ. የግብረ-መልስ ጊዜው ካለፈ ከዚህ እሴት ይበልጣል, it will start to decelerate.
ነባሪ የፍጥነት ወሰን: the default maximum speed of automatic cutting speed when turning on the machine.
ራስ-ሰር ሁኔታ: 0, አውቶማቲክ ማብሪያ በራስ-ሰር ቁጥጥር ይደረግበታል; 1, the automatic switch controls the automatic IO output point.
የፍጥነት ወሰን ማካካሻ: the maximum speed of the small motor during automatic cutting.
ከፍተኛ አስተናጋጅ: maximum speed of large motor.

የርቀት መቆጣጠሪያ ኤሌክትሪክ ባህሪዎች

የርቀት መቆጣጠሪያ መጠን

The final interpretation right of this product belongs only to our company.

ሞዴል：ATWGP-12

Adaptation system: all CNC systems with handwheel interface

This product is a manual pulse generator used with CNC machine tools. It has beenwidely used in fields such as CNC machine tools, CNC LASES, machining centers,CNC engraving and milling machines. This product uses wireless transmissiontechnology, eliminating the need for traditional spring wire connections, reducingequipment failures caused by cables, eliminating cable drag, oil and other contamination, and making operation more convenient. The product package includes the receiver and wireless electronic handwheel. The receiver is connected to the CNC equipment through a network cable, and the electronic handwheel (hand pulse generator) is connected and communicated with the receiver through wireless transmission technology. The operator holds the handwheel and can get rid of the connection constraints of the spring wire and move freely. For large-scale gantry milling, CNC LASES, traveling machine tools, መቆራረጥ እና ሌሎች መተግበሪያዎች, it brings great convenience and improves work efficiency.

Supports various system brands such as Siemens, ሙትቡሺ, Fancuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Using the 433MHZ wireless communication frequency band, the wireless operating distance is 40 ሜትር;
2. Adopt automatic frequency hopping function and use 32 sets of wireless handwheels at the same time without affecting each other;
3. Supports emergency stop button and 3 custom button switch outputs;
4. Supports multiple axis selections of 6-axis, 7-ዘንግ, 8-ዘንግ, 9-ዘንግ, 10-axis and 12-axis, with 3-speed and 4-speed magnification.Axis selection and magnification switches support various signal types such as binary coding, point-to-point, gray code, ወዘተ;
5. Supports 5V differential pulse signal, 24V pulse signal and other pulse signal types;
6. ዝቅተኛ የኃይል ፍጆታ ዲዛይን, 2 AA batteries can be used for more than 1 ወር;
7. Supports external extension antenna, suitable for various machine tool installation environments, ensuring signal stability;

ማስታወሻ:
1. Status indicator light:
Signal light (ግራ): The signal light is always on when the handwheelis operated, and does not light up when not operating;
ዝቅተኛ የ voltage ልቴጅ ማንቂያ መብራት (ቀኝ): When the battery power is too low,the alarm light flashes or stays on;
2. Enable button:
After pressing and holding the enable button, the axis selection and magnification signals are activated, and the pulse encoder output is valid;
3. Custom button:
A button without any function can control a corresponding switch output on the receiver;

COM1: Common terminal for axis selection magnification signal output; can be connected to 0-24V public signal
COM2: Common terminal of 3 custom button outputs;

*Axis selection and magnification can be selected through software, coding or point-to-point, please consult the staff for details

The final interpretation right of this product belongs to our company.

Adaptation system: all CNC systems with handwheel interface

This product is a manual pulse generator used with CNC machine tools. It has beenwidely used in fields such as CNC machine tools, CNC LASES, machining centers,CNC engraving and milling machines. This product uses wireless transmissiontechnology, eliminating the need for traditional spring wire connections, reducingequipment failures caused by cables, eliminating cable drag, oil and other contamination, and making operation more convenient. The product package includes the receiver and wireless electronic handwheel. The receiver is connected to the CNC equipment through a network cable, and the electronic handwheel (hand pulse generator) is connected and communicated with the receiver through wireless transmission technology. The operator holds the handwheel and can get rid of the connection constraints of the spring wire and move freely. For large-scale gantry milling, CNC LASES, traveling machine tools, መቆራረጥ እና ሌሎች መተግበሪያዎች, it brings great convenience and improves work efficiency.

Supports various system brands such as Siemens, ሙትቡሺ, Fancuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Using the 433MHZ wireless communication frequency band, the wireless operating distance is 40 ሜትር;
2. Adopt automatic frequency hopping function and use 32 sets of wireless handwheels at the same time without affecting each other;
3. Supports emergency stop button and 3 custom button switch outputs;
4. Supports multiple axis selections of 6-axis, 7-ዘንግ, 8-ዘንግ, 9-ዘንግ, 10-axis and 12-axis, with 3-speed and 4-speed magnification.Axis selection and magnification switches support various signal types such as binary coding, point-to-point, gray code, ወዘተ;
5. Supports 5V differential pulse signal, 24V pulse signal and other pulse signal types;
6. ዝቅተኛ የኃይል ፍጆታ ዲዛይን, 2 AA batteries can be used for more than 1 ወር;
7. Supports external extension antenna, suitable for various machine tool installation environments, ensuring signal stability;

ማስታወሻ:
1. Status indicator light:
Signal light (ግራ): The signal light is always on when the handwheelis operated, and does not light up when not operating;
ዝቅተኛ የ voltage ልቴጅ ማንቂያ መብራት (ቀኝ): When the battery power is too low,the alarm light flashes or stays on;
2. Enable button:
After pressing and holding the enable button, the axis selection and magnification signals are activated, and the pulse encoder output is valid;
3. Custom button:
A button without any function can control a corresponding switch output on the receiver;

COM1: Common terminal for axis selection magnification signal output; can be connected to 0-24V public signal
COM2: Common terminal of 3 custom button outputs;

*Axis selection and magnification can be selected through software, coding or point-to-point, please consult the staff for details

The final interpretation right of this product belongs to our company.