1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 ሜትር.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, axis selection, magnification, and other information.
3. የአደጋ ጊዜ ማቆሚያ ቁልፍን ይደግፉ, የ ioy የምልክት ውፅዓት ቀይር, and the hand wheel shutdown emergency stop is still valid.
4. ድጋፎች 6 ብጁ አዝራሮች, switch IO signals, and can output signals to the system through IO wiring or communication.
ደሞዝ የኤሌክትሮኒክስ እጅጌ መመሪያ መመሪያ
መግለጫ
1. የምርት መግቢያ
Electronic handwheel is used for manual guidance, አቀማመጥ, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.የምርት ተግባራዊ ባህሪዎች
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 ሜትር.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, axis selection, magnification, and other information.
3. የአደጋ ጊዜ ማቆሚያ ቁልፍን ይደግፉ, የ ioy የምልክት ውፅዓት ቀይር, and the hand wheel shutdown emergency stop is still valid.
4. ድጋፎች 6 ብጁ አዝራሮች, switch IO signals, and can output signals to the system through IO wiring or communication.
5. ድጋፎች 6 ወይም 8 የአክስሲስ ቁጥጥር, with switch IO signals that can be output to the system through IO wiring or communication.
6. ድጋፎች 3 ወይም 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. የምርት ዝርዝሮች
| Handwheel working power supply voltage | DC24V/1A |
| ተቀባዩ የኃይል አቅርቦት Vol ልቴጅ | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10m |
| Receiver end cable length | 1m |
| Receiver end network cable length | 3m |
| Operating temperature | -25℃<X<55℃ |
| Anti-fall height | 1m |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.የምርት ተግባር መግቢያ
ማስታወሻ:
Emergency stop button:
የአደጋ ጊዜ ማቆሚያ ቁልፍን ይጫኑ, እና በተቀባዩ ላይ ሁለቱ የአደጋ ጊዜ ማቆሚያዎች ስብስብ ይለያያል, እና የእጅ የእጅ ሥራ ተግባራት ሁሉ ልክ ያልሆኑ ናቸው.
After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 ብጁ አዝራሮች, በተቀባዩ ላይ ካለው የ IO ውፅዓት ነጥብ ጋር የሚዛመድ, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
የተዘበራረቀውን ቁልፍ ተጭነው ይቆዩ, የልብ ምት, የ pulse pulse ምልክት, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. የምርት ተካፋይ ሥዕላዊ መግለጫ
6. የምርት መጫኛ መመሪያ
6.1 የምርት ጭነት ደረጃዎች
6.1 የምርት ጭነት ደረጃዎች
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. የእኛን ተቀባዩ የሽቦ ንድፍ ማውጫውን ይመልከቱ እና ከጣቢያዎ መሣሪያዎችዎ ጋር አነፃፅረው. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 የመቀበያ ጭነት መጠባበቂያ ልኬቶች
6.3 Installation dimensions of aviation plugs
6.4 የተቀባዩ የሽቦ ንድፍ ንድፍ
7.Product Operation Instructions
7.Product Operation Instructions
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. ማጉያ ማጉላት ይምረጡ: Switch the magnification switch and select the magnification level you need.
7. ዘንግ ማንቀሳቀስ: የተዘበራረቀውን ቁልፍ ተጭነው ይቆዩ, የአክስ ምርጫ ማብሪያ / ማጥፊያ ይምረጡ, የማጉያ ማጉያ ማብሪያ / ማጥፊያ ይምረጡ, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. የአደጋ ጊዜ ማቆሚያ ቁልፍን ይጫኑ, ተቀባዩ ተጓዳኝ የአደጋ ጊዜ ማቆሚያ አዶ ውፅዓት ይቋረጣል, የእጅ ሥራው ተግባር ይሰናከላል, የአደጋ ጊዜ ማቆሚያ ቁልፍን ይልቀቁ, የአደጋ ጊዜ ማቆሚያ io ውፅዓት ይዘጋል, እና የእጅ ወረቀቱ እንደገና ይመለሳል.
8.የምርት የሞዴል መግለጫ
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : represents the number of axis selection switches, represents axes, and represents
መጥረቢያዎች.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, እና ቢ የተከለከ ውፅዓት ምልክትን ይወክላል.
9.Product trouble shooting
10.ጥገና
1. እባክዎ በክፍል ሙቀት እና የአገልግሎት ህይወቱን ለማራዘም በክፍል ሙቀት እና ግፊት ውስጥ በደረቅ አካባቢ ውስጥ ይጠቀሙበት.
2. የአገልግሎት ህይወቱን ለማራዘም እንደ ዝናብ እና የውሃ አረፋዎች ያሉ ያልተለመዱ አከባቢዎች ውስጥ ካሉ አይቁ.
3. የአገልግሎቱን ህይወቷን ለማራዘም እባክዎን የእጅ የእጅ ስራውን መልቀቅ ይጠብቁ.
4. እባክዎን እንዳይጨርሱ ያድርጉ, መውደቅ, ማደንዘዝ, ወዘተ. በጆሮው ወይም ትክክለኛ ስህተቶች ውስጥ ባለው ትክክለኛ አካላት ላይ ጉዳት እንዳይደርስ ለመከላከል.
5. ለረጅም ጊዜ ጥቅም ላይ የማይውል ከሆነ, please store the handwheel in a clean and safe place.During storage and transportation, ትኩረት መከፈል አለበት እና አስደንጋጭ የመቋቋም ችሎታ መከፈል አለበት.
11. የደህንነት መረጃ
1. ከባለሙያ ያልሆኑ ባለሙያዎችን ከመጠቀምዎ በፊት እና መከልከልዎን በጥንቃቄ ያንብቡ.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. ጥገና ከተጠየቀ, እባክዎን አምራቹን ያነጋግሩ. ጉዳቱ የሚከሰት ከሆነ በግለሰቦች ጥገና ከተከሰተ, አምራቹ የዋስትና ማረጋገጫ አይሰጥም
