ባለገመድ ኤሌክትሮኒክ የእጅ ጎማ UWGP

1.ድጋፎች 3 custom buttons with switching IO signal output.

2.Supports 6-axis control, እና 7 to 12-axis control is customizable.

3. Supports 3-speed magnification control, and 4-speed magnification control is customizable.

4.supports the enable button function, which can output switching IO signals, and also control axis selection, magnification and encoder.

5.Supports modifying the encoding type of axis selection and magnification via software.

Adopts 433MHz wireless communication technology with a wireless operating distance of 20 ሜትር.
Adaptive frequency hopping; 32 sets of wireless remote controls can be used simultaneously without interference.

መግለጫ

1.የምርት መግቢያ

Wireless Remote Control is used for manual guidance, አቀማመጥ, tool setting and other operations of CNC machine tools. ይህ ምርት ገመድ አልባ የማስተላለፍ ቴክኖሎጂን ይደግፋል, ባህላዊ የፀደይ ሽቦን ግንኙነት ማስወገድ, በኬብሎች ምክንያት የመሳሪያ ውድቀቶችን መቀነስ, የኬብል ጎራዎች ጉዳቶችን ያስወግዱ, የነዳጅ ዘይት, ወዘተ, and is more convenient to operate.It is widely applicable to CNC machine tools such as gantry machining centers, gantry vertical lathes, and CNC gear processing machines, and is compatible with various mainstream CNC system brands on the market, including Siemens, ሙትቡሺ, Fancuc, Syntec and more.

2.የምርት ባህሪዎች

1. Adopts 433MHz wireless communication technology with a wireless operating distance of 20 ሜትር.

2.Adaptive frequency hopping; 32 sets of wireless remote controls can be used simultaneously without interference.

3.Supports the emergency stop button, and the emergency stop button remains effective even after the remote control is powered off.

4.ድጋፎች 3 custom buttons with switching IO signal output.

5.Supports 6-axis control, እና 7 to 12-axis control is customizable.

6. Supports 3-speed magnification control, and 4-speed magnification control is customizable.

7.supports the enable button function, which can output switching IO signals, and also control axis selection, magnification and encoder.

8.Supports modifying the encoding type of axis selection and magnification via software.

9. Supports pulse encoder with specification of 100 በአንድ አብዮት ጥራጥሬዎች.

10. Supports standard Type-C charging with 5V-2A charging specification; built-in battery

specification: 14500 / 1100mah.

3. የምርት ዝርዝሮች

Working Voltage and Current of Handheld Terminal	3.7V/20.0mA
Charging Battery Specification	3.7V/14500/1100mAh
Low Voltage Alarm Range of Handheld Terminal	<3.35V
Receiver Power Supply Voltage	DC5V-24V/1A
Receiver Emergency Stop Output Load Range	Ac125V-1A / DC30ቪ-2 ሀ
Receiver Enable Output Load Range	Ac125V-1A / DC30ቪ-2 ሀ
Receiver Custom Button Output Load Range	DC24V / 50A
Receiver Axis Selection Output Load Range	DC24V / 50A
Receiver magnification Output Load Range	DC24V / 50A
Handheld Terminal Transmit Power	15DBM
ተቀባዩ የስሜትነት ይቀበላል	-100DBM
ገመድ አልባ የግንኙነት ድግግሞሽ	433የ MHZ ድግግሞሽ ባንድ
Wireless Communication Distance	20 meters barrier-free distance
Operating Temperature	-25℃<X<55℃
Safe drop height	1 m
Number of Custom Buttons	3
Product Weight	546.86（g）
Product Dimensions	2008772(Mm)

4. የምርት ተግባር መግቢያ

ማስታወሻዎች:

① Emergency Stop Button:

የአደጋ ጊዜ ማቆሚያ ቁልፍን ይጫኑ, the two groups of emergency stop IO outputs on the receiver will disconnect, and all remote control functions will be invalidated.Release the emergency stop button, the emergency stop IO outputs on the receiver will be closed, and all remote control functions will be restored. በተጨማሪ, even if the remote control is powered off, pressing the emergency stop button can still activate the emergency stop IO output of the receiver.

② Enable Button:

Press either enable button on both sides, the two sets of enable IO outputs on the receiver will conduct. Release the enable button, and the enable IO outputs will disconnect. It is necessary to press and hold the enable button before toggling axis selection, magnification or rotating the remote control for the operation to take effect.This function can be canceled through the configuration software.

③ Axis Selection Switch (Power Switch):

የተዘበራረቀውን ቁልፍ ተጭነው ይቆዩ, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.

④ Pulse Encoder:

Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.

⑤ LCD Display Screen:

5. Product Accessories Diagram

6. የምርት መጫኛ መመሪያ

6.1 የምርት ጭነት ደረጃዎች

1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.

2. የእኛ ተቀባዩ የሽቦ ንድፍን ይመልከቱ, ከጣቢያዎ መሣሪያዎችዎ ጋር አነፃፅረው, and connect the equipment to the receiver with cables.

3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; አለበለዚያ, signal failure may occur.

4. በመጨረሻ, turn on the remote control power switch, then you can remotely operate the machine via the remote control.

6.2 Receiver Installation Dimensions

6.3 የተቀባዩ የሽቦ ንድፍ ንድፍ

7. የምርት ኦፕሬሽን መመሪያዎች

1. በማሽኑ ላይ ያለው ኃይል እና ተቀባዩ. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.

2. Select the axis : የተዘበራረቀውን ቁልፍ ተጭነው ይቆዩ, toggle the axis selection switch to select the axis to be operated.

3. Select the magnification: የተዘበራረቀውን ቁልፍ ተጭነው ይቆዩ, toggle the magnification switch to select the required magnification gear.

4. Axis movement: የተዘበራረቀውን ቁልፍ ተጭነው ይቆዩ, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.

5. ማንኛውንም ብጁ ቁልፍን ተጭነው ይያዙ, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.

6. የአደጋ ጊዜ ማቆሚያ ቁልፍን ይጫኑ, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.

7. If the wireless remote control is not operated for a period of time, የኃይል ፍጆታ ለመቀነስ በራስ-ሰር የእንቅልፍ ሁኔታ ያስገባል. It can be used normally again by pressing the enable button again.

8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life

8. የምርት የሞዴል መግለጫ

①：UWGP stands for appearance style.

②：Pulse Output Parameters：

01: የ pulse ውፅዓት ምልክት ሀ, ለ; Poll ልቴጅ 5V; 5 ፓውንድ 100PPPS.

02: የ pulse ውፅዓት ምልክት ሀ, ለ; Poll ልቴጅ 12V; pulse quantity 25PPR.

03: የ pulse ውፅዓት ምልክት ሀ, ለ, ሀ -, ለ -; Poll ልቴጅ 5V; 5 ፓውንድ 100PPPS.

04: ዝቅተኛ-ደረጃ NPN ክፍት የወረዳ ውፅዓት ያሳያል, የ pulse የውበት ምልክቶች የ A እና ለ; The number of pulses is 100PPR.

05: የከፍተኛ ደረጃ የ PNP ምንጭ ውፅዓት ያሳያል, የ pulse የውበት ምልክቶች የ A እና ለ; የመጥፎዎች ብዛት 100 ፒ.ፒ..

③：Represents the axis selection switch quantity; 6 stands for 6 መጥረቢያዎች, 7 stands for 7 መጥረቢያዎች, and so on.

④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑥: የብጁ አዝራሮችን ቁጥር ይወክላል; 3 corresponds to 6 ብጁ አዝራሮች.

⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, እና 24 stands for 24V power supply.

⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.

9. የምርት መላ ፍለጋ

10. Maintenance and upkeep

1. እባክዎ በክፍል ሙቀት እና የአገልግሎት ህይወቱን ለማራዘም በክፍል ሙቀት እና ግፊት ውስጥ በደረቅ አካባቢ ውስጥ ይጠቀሙበት.

2. Please avoid using in abnormal environments such as rain and water to extend the service life.

3. Please keep the appearance of the remote control clean to extend its service life.

4. Please avoid crushing, dropping, or bumping, ወዘተ. to prevent damage to the precision components inside the remote control or accuracy errors.

5. ለረጅም ጊዜ ጥቅም ላይ የማይውል ከሆነ, please store the remote control in a clean and safe place.

6. Avoid moisture and shock during storage and transportation.

11. የደህንነት መረጃ

1. ከባለሙያ ያልሆኑ ባለሙያዎችን ከመጠቀምዎ በፊት እና መከልከልዎን በጥንቃቄ ያንብቡ.

2. Please charge the remote control in a timely manner when the battery level is too low, to avoid malfunction and operational errors caused by insufficient power.

3. If you repair it yourself and cause damage, the warranty will be void.

ባለገመድ ኤሌክትሮኒክ የእጅ ጎማ UWGP