Rezanje žice za rezanje žica na gusjenilo

Opis

1. Uvod proizvoda
The crawler vehicle rope saw automatic cutting remote control is suitable for crawler rope saw cutting machines. It adopts 485ModbusRTU protocol to control the speed start and front and rear left and right direction control of the left and right crawler inverters, as well as the large motor frequency conversion RTU protocol to control the speed start and front and rear left and right direction control of the left and right crawler inverters, and the large motor frequency conversion over-current analysis and comparison, automatically adjust the left and right crawler speeds in real time to achieve automatic cutting function.

2. Karakteristike proizvoda
1. Usvojiti 433MHz bežičnu komunikacijsku tehnologiju, Udaljenost bežične operacije je 100 metra.
2. Usvojite funkciju automatskog skoka frekvencije, koristiti 32 sets of wireless remote controllers at the same time, bez uticaja jedno na drugo.
3. Support all inverters with 485-Modbus RTU protocol. The inverter brands that have been adapted include:Shanghai Xielin, Fuji, Inovance, Zhongchen, INVT, Anchuanda. If the brand is not ada please contact us for customization.
4. Support large motor inverter start, speed regulation, and current reading.
5. Support left and right crawler inverter speed regulation, start, front and back left and right control.
6. Support left and right crawler inverter straight line correction to keep the machine moving in a straight line.
7. Support rope saw automatic cutting function, automatically adjust the left and right crawler speed in real time according to the large motor current information.
8. At the same time, it is compatible with direct IO output to control the start and stop of the motor, and analog voltage output to control the motor speed.

3. Specifikacije proizvoda

4. Uvod funkcije proizvoda

Bilješke:
①Prikaz na ekranu:

②Prekidač načina rada:
Using a 2-level switch, it is possible to switch between automatic and manual modes, and the corresponding mode will be displayed on the screen for switching.
③ Enable:
Kombinirana dugmad, neke operacije zahtijevaju držanje dugmeta za omogućavanje rada, please refer to the instructions for each switch for details.
④ Large motor switch:
Korišćenje prekidača za resetovanje sa 3 brzine, povlačenjem ovog prekidača može se kontrolirati naprijed i nazad rotacija velikog motora. Nakon puštanja, država će ostati, i na ekranu će se pojaviti odgovarajući prikazi. The t arrow indicates forward rotation, and the y arrow indicates reverse rotation.
⑤Mali motorni prekidač naprijed/nazad:
Using a 3-speed self-locking switch, pulling this switch can control the small motor to move forward and backward. The corresponding display will show on the screen, with the t arrow indicating forward and the ↓ arrow indicating backward.
⑥Remote control power switch:
Ekran displeja daljinskog upravljača je uključen.
⑦ small motor turning switch:
Korišćenje prekidača za resetovanje sa 3 brzine, kada se radi ručno, mali motor se može kontrolisati da skreće lijevo ili desno. Jednom pušten, the remote control will automatically stop this action.When in the forward state, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, and the – arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, and the – arrow indicates right turn.Press and hold the enable button, then turn this switch to perform a stationary turning function, making the turn faster.
⑧ Velika regulacija brzine motora:
Korištenje dugmeta enkodera s više okreta, rotate the knob to adjust the speed S1 of the large motor For every 1 grid rotation, vrijednost brzine velikog motora mijenja se približno 0.2 jedinice, and rapid rotation can quickly modify the speed value of the large motor.
9 Small motor speed regulation (linear correction):To use the multi turn encoder knob, u ručnom načinu rada, for every 1 turn of the knob, the speed value of the small motor changes by approximately 0.1 jedinice. Fast rotation can quickly modify the speed value of the small motor.
U automatskom režimu, press the enable button and rotate 1 mrežu svaki put. The speed limit value F of the small motor changes by approximately 0.1 jedinice. Rapid rotation can quickly modify the speed limit value of the small motor.Press the enable button, turn the knob to the right, and the straight line correction display shows D f: lijevo. Each rotation of the knob increases by 1 jedinica; Okrenite lijevo dugme, pravolinijski prikaz korekcije: Df: u pravu. Each rotation of the knob increases by 1 jedinica, and each correction unit corresponds to a motor speed control AVI voltage of about 0.02 V.

5. Dijagram dodataka proizvoda

6. Vodič za instalaciju proizvoda
6.1 Koraci instalacije proizvoda
1. Install the receiver in the electrical cabinet through the buckle on the back, or install it in the electrical cabinet through the screw holes at the four corners of the receiver.
2. Pogledajte naš dijagram ožičenja prijemnika, compare your on-site equipment, and connect the equipment to the receiver through wires.
3. Nakon što je prijemnik fiksiran, antena opremljena prijemnikom mora biti povezana, a vanjski kraj antene mora biti instaliran ili postavljen izvan električnog ormara. Preporučuje se da ga postavite na vrh električnog ormarića za najbolji signalni efekat. It is forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet, which may cause poor signal and unusable.
4. Konačno, install the battery in the remote control, zategnite poklopac baterije, and then turn on the power switch of the remote control. After the remote control display shows the normal working interface, you can perform remote control operation.

6.2 Ugradne dimenzije prijemnika

6.3 Referentni dijagram ožičenja prijemnika

7. Uputstvo za upotrebu proizvoda
7.1 Postavke parametara daljinskog upravljača
How to enter the background parameters of the remote controller: turn the mode switch to manual mode, podesite brzinu malog motora na 25, ili 0, 10, 20, 40, 50, and turn the forward switch of the large motor upwards 3 times and downwards 3 puta;
Koristite “Mala kontrola brzine motora” knob to turn the page, press Enable and turn the small motor speed control knob to modify the parameters; after modification, okrenite stranicu do kraja, select Save and Exit, and press the Enable button to exit the menu;

Parametri su sljedeći:Maksimalna struja: large motor current feedback value range, setting range 15-200A, default 60;

Parametri kontrole brzine: automatic mode small motor automatic acceleration speed, što je manje to brže, setting range 200-1500, default 1000;

Parametar usporavanja: Set the upper limit of the motor speed change allowed. Kada se struja promijeni iznad ove vrijednosti, it will decelerate. The smaller it is, the faster the left and right motors will decelerate. The range is 05-12, and the default is 06;

Ubrzanje a1: The larger the value, the faster the motor speed increases, range 00-06,default 01; Usporavanje a2: The larger the value, the faster the motor speed decreases, domet 00-06, default 02;

Omogućite regulaciju brzine: Whether the small motor speed regulation needs to be enabled, 00 is not enabled, 01 is enabled, default 01;

Startup self-locking: Whether the large motor will automatically keep self-locking after the forward and reverse switch is released, 00 is not maintained, 01 is maintained, default 01;

Maximum travel: Maximum speed of the left and right motors, domet 10-100, default 50;

Struja rezanja: Maximum cutting current, the screen displays IC value, domet 15-160, default 30, the screen displays IC: 30. The upper limit of this parameter = maximum current x 80%;

Zadano ograničenje brzine: The default small motor automatic cutting speed at startup, domet 00-100, default 10, the screen displays F1.0, this parameter is only accurate when the maximum travel is set to 50.

Wireless channel: Default is 10. When the remote control signal is unstable or there is signal interference on site, you can modify this parameter to switch channels to avoid interference;

Speed limit offset: The upper limit of the automatic cutting speed of the small motor,domet 00-200, default 60, the screen displays 6.0; Display value upper limit = speed limit offset × 0.1;

Maximum host: The maximum speed of the large motor, domet 10-100, default 50;

Mbus device ( obavezno ): large motor inverter model selection, domet 00-03, default 03;

00- Shanghai Xielin 01 Fuji
02- INVT 03 Inovance（Zhongchen, Robikon)

SBUS oprema (obavezno): Izbor modela pretvarača frekvencije motora, domet 00-05, default 03;
00- Shanghai Xielin 01 Fuji
02- INVT 03 Inovance（Zhongchen, Robikon)
04-Anchuanda 05-Nema

8. Rješavanje problema s proizvodom

7.2 Podešavanje parametara frekventnog pretvarača
1. Izbor izvora komande: Komunikacijski komandni kanal
2. Izbor glavnog izvora frekvencije: data komunikacija
3. Brzina prijenosa: 19200
4. Format podataka: Nema verifikacije, format podataka<8-N-1>
5. Lokalna adresa: Postavite lijevi frekventni pretvarač na 1, pravi frekventni pretvarač na 2, and the large motor frequency converter to 3

7.3 Upute za rad na daljinskom upravljaču
1. Uključite mašinu, Uključite daljinski upravljač, enter the remote control background, set the remote control background parameters, mainlyIt is to set the models of small and large motor frequency converters (skip this step if the machine manufacturer has already set them);
2. Podesite parametre frekventnog pretvarača (preskočite ovaj korak ako ga je proizvođač mašine već postavio);
3. Postavite daljinski upravljač na ručni način rada, and then use the remote control to move the machine to the working position;
4. U ručnom načinu rada, set the IC value for the cutting current of the large motor and the speed of the large motor;
5. Prebacite se na automatski način rada i postavite F vrijednost ograničenja brzine rezanja za mali motor;
6. U automatskom režimu, okrenite prekidač velikog motora prema naprijed kako biste pokrenuli veliki motor, and then turn the small motor switch to forward or reverse. The remote control enters automatic cutting mode and begins cutting.

9.Održavanje
1. Koristite ga u suhom okruženju na sobnoj temperaturi i pritisku kako biste produžili vijek trajanja.
2. Molimo izbjegavajte korištenje u nenormalnim okruženjima kao što su kiša i mjehurići vode kako biste produžili vijek trajanja.
3. Održavajte pretinac za baterije i područje metalnih gelera čistima.
4. Izbjegavajte oštećenje daljinskog upravljača zbog stiskanja i pada.
5. Ako se ne koristi dugo, please remove the battery and store the remote control and battery in a clean and safe place.
6.Tokom skladištenja i transporta, treba obratiti pažnju na otpornost na vlagu i udarce.

10. Sigurnosne informacije
1. Prije upotrebe pažljivo pročitajte upute i zabranite rad neprofesionalcima.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by insufficient power, što može dovesti do toga da daljinski upravljač ne može raditi.
3. Ako je potreban popravak, Molimo kontaktirajte proizvođača. Ako je oštećenje uzrokovano samopopravkom, Proizvođač neće pružiti garanciju