Cais penodol ar gyfer Siemens – Technoleg wixhc https://www.wixhc.cn Arweinydd Diwydiant Wed, 05 Nov 2025 06:21:59 +0000 cy hourly 1 https://wordpress.org/?v=6.8.3 Llawlyfr Cyfarwyddiadau olwyn law electronig â gwifrau https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Cyflwyniad Cynnyrch

Electronic handwheel is used for manual guidance, safleoedd, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, chwyddiad, buttons, andother signals through communication.
2.Nodweddion swyddogaethol cynnyrch
1. Defnyddiwch gebl plwg hedfan 6-craidd ar gyfer cysylltiad, gyda hyd cebl handwheel o 10 meters.
2. Gall y sgrin olwyn law arddangos cyfesurynnau workpiece system, cyfesurynnau mecanyddol,cyfradd bwydo, dewis echel, chwyddiad, and other information.
3. Cefnogi botwm stopio brys, Newid io allbwn signal, and the hand wheel shutdown emergency stop is still valid.
4. Nghefnogaeth 6 Botymau Custom, newid signalau IO, and can output signals to the system through IO wiring or communication.
5. Nghefnogaeth 6 neu 8 Rheoli Echel, with switch IO signals that can be output to the system through IO wiring or communication.
6. Nghefnogaeth 3 neu 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 corbys/troi, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Manylebau Cynnyrch
Handwheel working power supply voltage DC24V/1A
Foltedd cyflenwad pŵer derbynnydd DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10m
Receiver end cable length 1m
Receiver end network cable length 3m
Operating temperature -25℃<X<55℃
Anti-fall height 1m
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Cyflwyniad Swyddogaeth Cynnyrch

Chofnodes:
Emergency stop button:
Pwyswch y botwm stopio brys, a bydd y ddwy set o allbynnau IO stop brys ar y derbynnydd yn cael eu datgysylltu, and all functions of the handwheel will be invalid.
After releasing the emergency stop, Mae'r allbwn stop brys io ar y derbynnydd ar gau, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Botymau Custom, pob un yn cyfateb i bwynt allbwn IO ar y derbynnydd, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Pwyswch a dal y botwm galluogi, ysgwyd yr amgodiwr pwls, allyrru signal pwls, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Diagram affeithiwr cynnyrch

6. Canllaw Gosod Cynnyrch
6.1 Camau gosod cynnyrch
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Cyfeiriwch at ein diagram gwifrau derbynnydd a'i gymharu â'ch offer ar y safle. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Ar ôl gosod y derbynnydd, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Dimensiynau Gosod Derbynnydd

6.3 Installation dimensions of aviation plugs

6.4 Diagram cyfeirio gwifrau derbynnydd
7.Cyfarwyddiadau Gweithredu Cynnyrch

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Dewiswch Chwyddiad: Switch the magnification switch and select the magnification level you need.
7. Echel Symud: Pwyswch a dal y botwm galluogi, dewiswch y switsh dewis echel, dewiswch y switsh chwyddo, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Pwyswch y botwm stopio brys, bydd allbwn IO stop brys cyfatebol y derbynnydd yn cael ei ddatgysylltu, bydd y swyddogaeth handwheel yn anabl, rhyddhau'r botwm stopio brys, bydd yr allbwn stop brys IO ar gau, and the handwheel function will be restored.
8.Disgrifiad o'r Model Cynnyrch

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : yn cynrychioli nifer y switshis dewis echel, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Cynnal a chadw
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Osgoi gwasgu, chwympo, thu, ac ati. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Os na chaiff ei ddefnyddio am amser hir, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Gwybodaeth Diogelwch

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Os oes angen atgyweirio, Cysylltwch â'r gwneuthurwr. Os yw'r difrod yn cael ei achosi gan hunan -atgyweirio, Ni fydd y gwneuthurwr yn darparu gwarant

 

]]> O bell di -wifr pwrpasol ar gyfer cyfarwyddiadau gweithredu turn fertigol CNC https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Cyflwyniad Cynnyrch

Defnyddir y dull rheoli o bell di-wifr pwrpasol ar gyfer turnau fertigol CNC fel arweiniad â llaw, safleoedd, gosodiad offer, a gweithrediadau eraill ar offer peiriant fertigol CNC. Mae'r cynnyrch hwn yn mabwysiadu technoleg trosglwyddo diwifr, dileu'r angen am gysylltiadau gwifrau gwanwyn traddodiadol, lleihau methiannau offer a achosir gan geblau, a dileu anfanteision llusgo cebl a staeniau olew, gwneud gweithrediad yn fwy cyfleus. Mae'n berthnasol yn eang i wahanol turnau fertigol megis turnau fertigol CNC, turnau fertigol un golofn, a gellir hefyd addasu lathes.It fertigol colofn dwbl i amrywiaeth o systemau CNC ar y farchnad, megis Siemens,
Mitsubishi, Ffaniff, and Syntec.

2. Nodweddion swyddogaethol cynnyrch

1. Mabwysiadu 433 Technoleg cyfathrebu diwifr MHz, gyda phellter gweithredu di-wifr o 40 meters.
2.Mabwysiadu swyddogaeth hercian amledd awtomatig a defnyddio 32 setiau o reolwyr o bell di-wifr ar yr un pryd, without affecting each other.
3. Cefnogi botwm stopio brys, switch IO signal output.
4. Nghefnogaeth 2 Botymau Customizable, with switch-type IO signal output.
5. Nghefnogaeth -2 axis control.
6. Supports 3-level magnification control.
7. Cefnogwch swyddogaeth y botwm galluogi, a all allbynnu signalau IO ymlaen / i ffwrdd a rheoli dewis echelin, ffactor lluosi, ac amgodiwr.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Yn cefnogi amgodiwr pwls, gyda manyleb o 100 pulses per revolution.
3. Manylebau Cynnyrch
Foltedd gweithredu a cherrynt o bell di-wifr
3V/14MA
Manylebau batri 2 AA batris alcalïaidd, size 5
Amrediad larwm foltedd isel o bell di-wifr < 2.3V
Foltedd cyflenwad pŵer derbynnydd DC5V-24V/A
Amrediad llwyth allbwn stop brys derbynnydd AC125V-1A/DC30V-2A
Derbynnydd galluogi ystod llwyth allbwn
AC125V-1A/DC30V-2A
Ystod llwyth allbwn botwm arfer derbynnydd DC24V/50mA
Derbynnydd echel dewis ystod llwyth allbwn DC24V/50mA
Amrediad llwyth allbwn chwyddiad derbynnydd DC24V/50mA
Pŵer trosglwyddo terfynell llaw
15dBm
Derbynnydd yn derbyn sensitifrwydd -100dBm
Amledd cyfathrebu di-wifr 433Band amledd MHz
Pellter cyfathrebu di-wifr Pellter rhydd rhwystr o 40 metrau
Tymheredd gweithredu -25℃ < X < 55℃
Uchder gwrth syrthio 1 (fesuryddion)
Maint botwm personol 2
4. Cyflwyniad Swyddogaeth Cynnyrch



Nodiadau:

① pwls encoder:
Pwyswch a dal y botwm galluogi, ysgwyd yr amgodiwr pwls, allyrru signal pwls,and control the movement ofthe machine axis.
② Galluogi botwm:
Pwyswch y naill fotwm galluogi ar y naill ochr neu'r llall, a bydd y ddwy set o allbynnau IO galluogi ar y derbynnydd yn dargludo. Rhyddhewch y botwm galluogi i ddatgysylltu allbwn galluogi IO; A chyn newid y chwyddhad detholiad echelin ac ysgwyd y handwheel,mae angen dal y botwm galluogi i lawr i fod yn effeithiol; This function can be cancelled through configuration software.

③ Goleuadau dangosydd:
Golau ochr chwith: pŵer ar olau,mae'r olwyn law yn defnyddio'r echelin i ddewis OFF ar gyfer pŵer ymlaen, ac mae'r golau hwn yn aros ymlaen ar ôl pŵer ymlaen;
Golau canol: golau signal sy'n goleuo wrth weithredu unrhyw swyddogaeth o'r olwyn law, ac nid yw'n goleuo pan nad oes llawdriniaeth;
Golau ochr dde: Golau larwm foltedd isel, lefel batri isel,mae'r golau hwn yn fflachio neu'n aros ymlaen, battery needs to be replaced.

④ Botwm stopio brys:
Pwyswch y botwm stopio brys, a bydd y ddwy set o allbynnau IO stop brys ar y derbynnydd yn cael eu datgysylltu, and all functions of the handwheel will be invalid.

⑤ Chwyddiad switsh:
Pwyswch a dal y botwm galluogi i newid y switsh chwyddo, which can switch the magnification controlled by the handwheel.

⑥ Echel switsh dewis (Newid pŵer):
Pwyswch a dal y botwm galluogi i newid y switsh dewis echelin, a all newid yr echel symud a reolir gan yr olwyn law. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ botwm Custom:
Dau fotwm personol, each corresponding to an IO output point on the receiver.

5. Diagram affeithiwr cynnyrch

6. Canllaw Gosod Cynnyrch
6.1 Camau gosod cynnyrch

1. Gosodwch y derbynnydd yn y cabinet trydanol trwy'r bwcl ar y cefn, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Cyfeiriwch at ein diagram gwifrau derbynnydd a'i gymharu â'ch offer ar y safle. Connect the equipment to the receiver via cables.
3.Ar ôl i'r derbynnydd gael ei osod yn iawn, rhaid cysylltu'r antena sydd â'r derbynnydd, a dylid gosod neu osod pen allanol yr antena y tu allan i'r cabinet trydanol. Argymhellir ei osod ar ben y cabinet trydanol i gael yr effaith signal gorau. Gwaherddir gadael yr antena heb ei gysylltu na'i osod y tu mewn i'r cabinet trydanol, as this may result in the signal being unusable.
4. Olaf, trowch switsh pŵer yr olwyn law ymlaen, and you can operate the machine remotely using the handwheel.

6.2 Dimensiynau Gosod Derbynnydd

6.3 Diagram cyfeirio gwifrau derbynnydd

7. Cyfarwyddiadau gweithredu cynnyrch
1. Pwer ar y peiriant a'r derbynnydd. Mae golau dangosydd gweithredol y derbynnydd yn fflachio. Gosodwch y batri yn yr olwyn law electronig di-wifr, sicrhewch y clawr batri, a
trowch switsh pŵer yr olwyn law electronig ddi-wifr ymlaen. The handwheel’s battery level indicator light is on.
2. Dewiswch yr echel gyfesuryn: Pwyswch a dal y botwm galluogi, toglo'r switsh dewis echelin, and select the axis you want to operate.
3. Dewiswch Chwyddiad: Pwyswch a dal y botwm galluogi, toglo'r switsh chwyddo,and select the desired magnification level.
4. Echel Symud: Pwyswch a dal y botwm galluogi, dewiswch y switsh dewis echel, dewiswch y switsh chwyddo, ac yna cylchdroi'r amgodiwr pwls. Cylchdroi clocwedd i symud y
positive axis and counterclockwise to move the negative axis.
5. Pwyswch a dal unrhyw botwm arfer, a bydd allbwn IO botwm cyfatebol y derbynnydd yn cael ei droi ymlaen. Rhyddhewch y botwm, and the output will be turned off.
6. Pwyswch y botwm stopio brys, bydd allbwn IO stop brys cyfatebol y derbynnydd yn cael ei ddatgysylltu, bydd y swyddogaeth handwheel yn anabl,rhyddhau'r botwm stopio brys, bydd yr allbwn stop brys IO ar gau, and the handwheel function will be restored.
7. Os na weithredir yr olwyn law am gyfnod o amser, bydd yn mynd i mewn i'r modd cysgu yn awtomatig i leihau'r defnydd o bŵer. Pan fydd yn cael ei ddefnyddio eto, the handwheel can be activated by pressing the enable button.
8. Os na ddefnyddir yr olwyn law am amser hir, argymhellir newid y siafft olwyn llaw i'r sefyllfa ODDI, Diffoddwch y pŵer olwynion llaw, and extend the battery life.

8. Disgrifiad o'r Model Cynnyrch

① :Mae ZTWGP yn cynrychioli'r arddull ymddangosiad
②：Paramedrau allbwn pwls:
01: Yn dangos bod y signal allbwn pwls yn A, B; Foltedd pwls 5v; pulse quantity 100PPR.
02：Yn dangos mai'r signalau allbwn pwls yw A a B; Foltedd pwls 12V; pulse quantity 100PPR.
03：Yn dangos bod y signalau allbwn pwls yn A, B, A -, B -; Foltedd pwls 5v; pulse quantity 100PPR.
04：Yn nodi allbwn cylched agored NPN lefel isel, gyda signalau allbwn pwls o A a B.;The number of pulses is 100PPR.
05：Yn dynodi allbwn ffynhonnell PNP lefel uchel, gyda signalau allbwn pwls o A a B.; The number of pulses is 100PPR.
③：Yn cynrychioli nifer y switshis dethol echelin, 2 gynrychioli 2 axes.
④：Yn cynrychioli'r math o echel dewis switsh signal, Mae A yn cynrychioli signal allbwn pwynt i bwynt, and B represents encoded output signal.
⑤：Yn cynrychioli'r math o signal switsh lluosi, Mae A yn cynrychioli signal allbwn pwynt i bwynt, and B represents encoded output signal.
⑥：Yn cynrychioli nifer y botymau arferiad, 2 gynrychioli 2 custom buttons.
⑦：Yn cynrychioli'r cyflenwad pŵer ar gyfer olwyn law'r system, a 05 represents 5V power supply.
⑧：Mae L yn cynrychioli'r golofn chwith (deiliad cyllell chwith), ac mae R yn cynrychioli'r golofn dde (deiliad cyllell dde).

9.Ateb i Gamweithrediadau Cynnyrch

10. Cynnal a chadw cynnyrch

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Osgoi gwasgu, chwympo, thu, ac ati. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Os na chaiff ei ddefnyddio am amser hir, Storiwch yr olwyn law mewn man glân a diogel. Wrth storio a chludo, attention should be paid to moisture and shock resistance.

11. Gwybodaeth Diogelwch

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Os oes angen atgyweirio, Cysylltwch â'r gwneuthurwr. Os yw'r difrod yn cael ei achosi gan hunan -atgyweirio, Ni fydd y gwneuthurwr yn darparu gwarant

]]> FANUC Handwheel Electronig Di -wifr Pwrpasol https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Mai 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Cyflwyniad Cynnyrch

Defnyddir olwyn law electronig ddi -wifr ar gyfer arweiniad â llaw, safleoedd, tool alignment,and other operations on CNC machine tools. Mae'r cynnyrch hwn yn mabwysiadu technoleg trosglwyddo diwifr, Dileu'r cysylltiad gwifren gwanwyn traddodiadol, lleihau methiannau offer a achosir gan geblau, eliminating the disadvantages of cable dragging and oil stains, a gwneud gweithrediad yn fwy cyfleus. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,chwyddiad, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Nodweddion cynnyrch
1. Mabwysiadu Technoleg Cyfathrebu Di -wifr 433MHz, mae pellter gweithredu diwifr yn 40 metrau;
2. Mabwysiadu swyddogaeth hopian amledd awtomatig, harferwch 32 sets of wireless remote controllers at the same time without affecting each other;
3. Cefnogi botwm stopio brys, Newid io allbwn signal, connected to the system through IO wiring;
4. Cefnoga ’ 4 Botymau Custom, Newid io signal, signal allbwn i'r system trwy brotocol IO-Link;
5. Cefnogi botwm Symud Cyflym + a botwm -, pwyswch a dal y botwm i ailosod yr olwyn law i symud y peiriant;
6. Cefnogi rheolaeth 6-echel, Newid io signal, signal allbwn i'r system trwy brotocol IO-Link;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Nodiadau:
Botwm STOP ①EMERGENCY:
Pwyswch y botwm stopio brys, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Botymau Custom, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Pwyswch a dal y botwm galluogi ac ysgwyd yr amgodiwr pwls i anfon pwls allan
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Diagram ategolion cynnyrch

6.Canllaw Gosod Cynnyrch

6.1 Camau Gosod Cynnyrch

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Cyfeiriwch at ein diagram gwifrau derbynnydd, Cymharwch ef â'ch offer ar y safle, a chysylltu
the equipment to the receiver via cables.
3. Ar ôl i'r derbynnydd fod yn sefydlog, rhaid cysylltu'r antena sydd â'r derbynnydd,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Argymhellir ei osod ar ben y cabinet trydanol i gael yr effaith signal gorau. Fe
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Olaf, Trowch ymlaen y switsh pŵer olwynion llaw a gallwch chi weithredu'r peiriant heibio
handwheel remote control.

6.2 Dimensiynau Gosod Derbynnydd

6.3 Diagram cyfeirio gwifrau derbynnydd

7. Cynnal a Chadw a Gofal

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
bywyd y gwasanaeth;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Osgoi gwasgu, chwympo, thu, ac ati. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Os na chaiff ei ddefnyddio am amser hir, Storiwch yr olwyn law mewn man glân a diogel;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Darllenwch y cyfarwyddiadau yn ofalus cyn eu defnyddio. Gwaherddir nad ydynt yn weithwyr proffesiynol o
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Os oes angen atgyweirio, Cysylltwch â'r gwneuthurwr. Os yw'r difrod yn cael ei achosi gan hunan-atgyweirio,
the manufacturer will not provide warranty.

]]> Mae Siemens yn pwrpasu Handwheel Electronig Di-wifr XWGP-ETS https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Mai 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Cyflwyno teclyn rheoli o bell

A.product composiffition
Mae Siemens Cydgysylltiad Amser Real yn arddangos Handwheel Electronig Di-wifr yn cynnwys dwy ran: olwyn law electronig + derbynnydd;

B.Characteristics

*Cefnogi Siemens Plc: S7-200/-300/-1200；Cefnogi arddangos amser real o werthoedd cydlynu system Siemens；
*Mae'r pellter trosglwyddo diwifr ar agor 40 metrau, technoleg hopian amledd awtomatig, yn gallu defnyddio 32 setiau o offer ar yr un pryd;
*Mae'r olwyn law electronig yn cael ei phweru gan 2 Batris AA a gellir eu defnyddio ar gyfer mwy na 30 nyddiau;
*Mae gan y derbynnydd antena allanol i wella'r signal ac mae'n hawdd ei osod;
*Cefnogaeth olwynion electronig: un amgodiwr 100ppr 、un switsh dewis echel 6-cyflymder 、 un switsh chwyddo 3-cyflymder;
*Cefnogaeth olwynion electronig 6 Botymau Custom, sy'n cyfateb i gyfeiriad Siemens plc, y gellir ei raglennu'n rhydd;

*6 Gall botymau personol reoli 6 Newid Allbynnau;
*Mae'r sgrin arddangos yn arddangos gwerth cydlynu cofrestr cyfatebol PLC mewn amser real, and supports 6-axis display of real-time coordinates.

2.Maes cais

Defnyddir rheolaeth o bell CNC rhaglenadwy yn helaeth mewn amrywiol feysydd CNC fel system engrafiad laser, Peiriant Milling CNC, Canolfan Beiriannu CNC, Offeryn Peiriant Gantry, ac ati.

3. Cyflwyniad i'r Egwyddor Weithio

1） Mae olwyn law electronig wedi'i chysylltu â PLC trwy dderbynnydd Ethernet

a.Mae'r olwyn law yn trosglwyddo'r data allweddol yn ddi -wifr i'r derbynnydd, ac mae'r derbynnydd yn ysgrifennu'r allweddi trwy ardal DB System Cable PLC y rhwydwaith; Mae'r derbynnydd yn darllen y data i'w arddangos o'r ardal DB dynodedig, ac yna'n dychwelyd y data i'r sgrin arddangos olwyn law. Gall y defnyddiwr addasu cyfeiriad sylfaenol darllen ac ysgrifennu ardal DB ar yr olwyn law, so that the handwheel can read and write the data in the DB area of the PLC.

b. Mae'r derbynnydd yn cefnogi protocol Siemens S7. Yn berthnasol i PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Yn y modd gweinydd, Mae'r defnyddiwr yn ffurfweddu cyfeiriad darllen ac ysgrifennu PLC trwy feddalwedd cyfluniad WGP-ETS;Defnyddiwch yr Offeryn Cyfluniad Cysylltiad PLC i ffurfweddu'r derbynnydd yn y modd Cleient. Ar ôl cyfluniad, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Cais penodol

Cymhwyso derbynnydd olwynion llaw yn benodol a Siemens plc S7-200:

a. Mae'r botwm ar yr olwyn law yn cyfateb i werth yr ardal bool a osodwyd gan y defnyddiwr yn y PLC. Os yw botwm yr olwyn law yn cael ei wasgu, Mae'r ardal bool gyfatebol yn wir, A phan fydd yn cael ei ryddhau, mae'n ffug, a gellir gosod cyfeiriad sylfaenol yr ardal bool trwy'r olwyn law;

b. Gall yr olwyn law ddarllen gwerth yr ardal db yn y PLC. Mae gan un echel 4 beitiau o ddata arddangos, a 6 Mae gan echelinau gyfanswm o 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Cyflwyniad ymddangosiad

5.Tabl Derbynnydd Derbynnydd a Tabl Codio

6.Maint ymddangosiad

 

 

]]>