Specifik anvendelse til Siemens – WIXHC -teknologi https://www.wixhc.cn Industry Leader Wed, 05 Nov 2025 06:21:59 +0000 da-DK hourly 1 https://wordpress.org/?v=6.8.3 Kablet elektronisk håndhjul Instruktionsmanual https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Produktintroduktion

Electronic handwheel is used for manual guidance, positionering, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, forstørrelse, buttons, andother signals through communication.
2.Produktfunktionelle funktioner
1. Brug et 6-leder flystikkabel til tilslutning, med en håndhjulskabellængde på 10 meters.
2. Håndhjulsskærmen kan vise systemets arbejdsemnekoordinater, mekaniske koordinater,tilførselshastighed, valg af akse, forstørrelse, and other information.
3. Støtte nødstopknap, Skift IO -signaludgang, and the hand wheel shutdown emergency stop is still valid.
4. Understøtter 6 Brugerdefinerede knapper, skifte IO-signaler, and can output signals to the system through IO wiring or communication.
5. Understøtter 6 eller 8 Axis kontrol, with switch IO signals that can be output to the system through IO wiring or communication.
6. Understøtter 3 eller 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulser/drejning, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Produktspecifikationer
Handwheel working power supply voltage DC24V/1A
Receiver power supply voltage DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10m
Receiver end cable length 1m
Receiver end network cable length 3m
Operating temperature -25℃<X<55℃
Anti-fall height 1m
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Produktfunktion introduktion

Note:
Emergency stop button:
Tryk på nødstopknappen, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, nødstop IO-udgangen på modtageren er lukket, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Brugerdefinerede knapper, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Tryk på og hold aktiveringsknappen nede, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Produkttilbehørsdiagram

6. Produktinstallationsvejledning
6.1 Produktinstallationstrin
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Se vores modtagerledningsdiagram og sammenlign det med dit udstyr på stedet. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Efter at have rettet modtageren, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Modtagerinstallationsdimensioner

6.3 Installation dimensions of aviation plugs

6.4 Modtager ledningsreferencediagram
7.Produktbetjeningsvejledning

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Vælg forstørrelse: Switch the magnification switch and select the magnification level you need.
7. Bevægelig akse: Tryk på og hold aktiveringsknappen nede, vælg kontakten til valg af akse, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Tryk på nødstopknappen, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.Produktmodelbeskrivelse

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : repræsenterer antallet af aksevalgskontakter, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Opretholdelse
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Undgå venligst at klemme, falder, støde, osv. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Hvis ikke brugt i lang tid, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Sikkerhedsoplysninger

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Hvis reparation er påkrævet, Kontakt producenten. Hvis skaden er forårsaget af selvreparation, producenten giver ikke garanti

 

]]> Dedikeret trådløs fjernbetjening til CNC Vertical drejebænkdrift. https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Produktintroduktion

The dedicated wireless remote contro for CNC vertical lathes is used for manual guidance, positionering, tool setting, and other operations on CNC vertical machine tools. Dette produkt anvender trådløs transmissionsteknologi, eliminating the need for traditional spring wirae connections, reducere udstyrsfejl forårsaget af kabler, and eliminating the disadvantages of cable dragging and oil stains, making operation more convenient. It is widely applicable to various vertical lathes such as CNC vertical lathes, single-column vertical lathes, and double-column vertical lathes.It can also be adapted to a variety of CNC systems on the market, såsom Siemens,
Mitsubishi, Fanuc, and Syntec.

2. Produktfunktionelle funktioner

1. Adopting 433 MHz wireless communication technology, med en trådløs driftsafstand på 40 meters.
2.Adopting automatic frequency hopping function and using 32 sets of wireless remote controllers simultaneously, without affecting each other.
3. Støtte nødstopknap, switch IO signal output.
4. Understøtter 2 Tilpasbare knapper, with switch-type IO signal output.
5. Understøtter -2 axis control.
6. Supports 3-level magnification control.
7. Support the enable button function, which can output on/off IO signals and control axis selection, multiplying factor, og encoder.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Supports pulse encoder, with a specification of 100 pulses per revolution.
3. Produktspecifikationer
Operating voltage and current of wireless remote
3V/14MA
Battery specifications 2 AA alkaline batteries, size 5
Low voltage alarm range of wireless remote < 2.3V
Receiver power supply voltage DC5V-24V/A
Receiver emergency stop output load range AC125V-1A/DC30V-2A
Receiver enable output load range
AC125V-1A/DC30V-2A
Receiver custom button output load range DC24V/50mA
Receiver axis selection output load range DC24V/50mA
Receiver magnification output load range DC24V/50mA
Transmission power of handheld terminal
15dBm
Receiver receiving sensitivity -100dBm
Wireless communication frequency 433MHz frequency band
Wireless communication distance Barrier free distance of 40 meter
Operation temperature -25℃ < X < 55℃
Anti fall height 1 (måler)
Custom button quantity 2
4. Produktfunktion Introduktion



Noter:

① Pulse encoder:
Tryk på og hold aktiveringsknappen nede, shake the pulse encoder, emit a pulse signal,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: Alarmlys med lav spænding, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
Tryk på nødstopknappen, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (strømafbryder):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Produkttilbehørsdiagram

6. Produktinstallationsvejledning
6.1 Produktinstallationstrin

1. Installer modtageren i det elektriske skab gennem spændet på ryggen, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Se vores modtagerledningsdiagram og sammenlign det med dit udstyr på stedet. Connect the equipment to the receiver via cables.
3.After the receiver is properly fixed, antennen udstyret med modtageren skal tilsluttes, and the outer end of the antenna should be installed or placed outside the electrical cabinet. Det anbefales at placere det på toppen af ​​det elektriske skab for den bedste signaleffekt. It is prohibited to leave the antenna unconnected or place it inside the electrical cabinet, as this may result in the signal being unusable.
4. Endelig, turn on the power switch of the handwheel, and you can operate the machine remotely using the handwheel.

6.2 Modtagerinstallationsdimensioner

6.3 Modtager ledningsreferencediagram

7. Produktoperationsinstruktioner
1. Power on the machine and the receiver. The receiver’s working indicator light flashes. Install the battery in the wireless electronic handwheel, secure the battery cover, og
turn on the power switch of the wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. Vælg koordinataksen: Tryk på og hold aktiveringsknappen nede, toggle the axis selection switch, and select the axis you want to operate.
3. Vælg forstørrelse: Tryk på og hold aktiveringsknappen nede, toggle the magnification switch,and select the desired magnification level.
4. Bevægelig akse: Tryk på og hold aktiveringsknappen nede, vælg kontakten til valg af akse, select the magnification switch, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. Tryk og hold en vilkårlig brugerdefineret knap nede, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. Tryk på nødstopknappen, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled,release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
7. Hvis håndhjulet ikke betjenes i en periode, it will automatically enter sleep mode to reduce power consumption. Når den bruges igen, the handwheel can be activated by pressing the enable button.
8. Hvis håndhjulet ikke bruges i længere tid, it is recommended to switch the handwheel shaft to the OFF position, slå håndhjulet fra, and extend the battery life.

8. Produktmodelbeskrivelse

① :ZTWGP represents the appearance style
②：Pulsudgangsparametre:
01: Indicates that the pulse output signal is A, B; Pulsspænding 5V; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; Pulsspænding 5V; pulse quantity 100PPR.
04：Angiver en lav-niveau NPN åben kredsløbsudgang, med pulsudgangssignaler på A og B;The number of pulses is 100PPR.
05：Angiver PNP-kildeoutput på højt niveau, med pulsudgangssignaler på A og B; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 repræsenterer 2 axes.
④：Represents the type of axis selection switch signal, A repræsenterer punkt-til-punkt udgangssignal, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, A repræsenterer punkt-til-punkt udgangssignal, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 repræsenterer 2 custom buttons.
⑦：Represents the power supply for the system handwheel, og 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

10. Product maintenance

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Undgå venligst at klemme, falder, støde, osv. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Hvis ikke brugt i lang tid, Opbevar håndhjulet på et rent og sikkert sted. Under opbevaring og transport, attention should be paid to moisture and shock resistance.

11. Sikkerhedsoplysninger

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Hvis reparation er påkrævet, Kontakt producenten. Hvis skaden er forårsaget af selvreparation, producenten giver ikke garanti

]]> Fanuc dedikeret trådløs elektronisk håndhjul https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 maj 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Produktintroduktion

Trådløst elektronisk håndhjul bruges til manuel vejledning, positionering, tool alignment,and other operations on CNC machine tools. Dette produkt anvender trådløs transmissionsteknologi, eliminerer den traditionelle fjedertrådsforbindelse, reducere udstyrsfejl forårsaget af kabler, eliminating the disadvantages of cable dragging and oil stains, og gøre operationen mere praktisk. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,forstørrelse, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Produktfunktioner
1. Vedtage 433MHz trådløs kommunikationsteknologi, Trådløs driftsafstand er 40 meter;
2. Vedtag automatisk frekvenshop-funktion, bruge 32 sets of wireless remote controllers at the same time without affecting each other;
3. Støtte nødstopknap, Skift IO -signaludgang, connected to the system through IO wiring;
4. Støtte 4 Brugerdefinerede knapper, Skift IO -signal, Outputsignal til systemet gennem IO-Link-protokol;
5. Støtt hurtig bevægelsesknap + og knap -, Tryk og hold på knappen for at udskifte håndhjulet for at flytte maskinen;
6. Understøtt 6-akset kontrol, Skift IO -signal, Outputsignal til systemet gennem IO-Link-protokol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Noter:
①Nødstopknap:
Tryk på nødstopknappen, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Brugerdefinerede knapper, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Tryk og hold aktiveringsknappen nede, og ryst pulsencoderen for at sende en puls
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Produkttilbehør diagram

6.Produktinstallationsvejledning

6.1 Produktinstallationstrin

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Se vores modtagerledningsdiagram, sammenligne det med dit udstyr på stedet, og tilslut
the equipment to the receiver via cables.
3. Efter at modtageren er fikset, antennen udstyret med modtageren skal tilsluttes,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Det anbefales at placere det på toppen af ​​det elektriske skab for den bedste signaleffekt. Det
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Endelig, tænd for håndhjulets strømafbryder, og du kan betjene maskinen ved
handwheel remote control.

6.2 Modtagerinstallationsdimensioner

6.3 Modtager ledningsreferencediagram

7. Vedligeholdelse og pleje

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
levetiden;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Undgå venligst at klemme, falder, støde, osv. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Hvis ikke brugt i lang tid, Opbevar håndhjulet på et rent og sikkert sted;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Læs venligst instruktionerne omhyggeligt før brug. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Hvis reparation er påkrævet, Kontakt producenten. If the damage is caused by self-repair,
the manufacturer will not provide warranty.

]]> Siemens dedikerede trådløse elektroniske håndhjul XWGP-ETs https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 maj 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Introduktion af fjernbetjening

a.Product Composion
Siemens real-time koordinat display trådløst elektronisk håndhjul består af to dele: elektronisk håndhjul + modtager;

b. Karakteristika

*Support Siemens plc: S7-200/-300/-1200；Støtte realtidsvisning af Siemens-systemkoordinatværdier；
*Den trådløse transmissionsafstand er åben 40 meter, automatisk frekvenshop teknologi, kan bruge 32 sæt udstyr på samme tid;
*Det elektroniske håndhjul drives af 2 AA batterier og kan bruges til mere end 30 dage;
*Modtageren er udstyret med en ekstern antenne for at forstærke signalet og er nem at installere;
*Elektronisk håndhjulsstøtte: en 100 ppr -koder 、En 6-trins akseudvælgelseskontakt 、 En 3-trins forstørrelsesafbryder;
*Elektroniske håndhjulsstøtter 6 Brugerdefinerede knapper, svarende til Siemens PLC-adresse, som kan være frit programmeret;

*6 Brugerdefinerede knapper kan kontrollere 6 Skift output;
*Displayskærmen viser PLC-korresponderende registerkoordinatværdi i realtid, and supports 6-axis display of real-time coordinates.

2.Ansøgningsfelt

Programmerbar CNC-fjernbetjening er meget udbredt i forskellige CNC-områder, såsom lasergraveringssystem, CNC Milling Machine, CNC Machining Center, portal værktøjsmaskine, osv.

3. Introduktion til arbejdsprincippet

1）Elektronisk håndhjul er forbundet til PLC via Ethernet-modtager

a. Håndhjulet sender nøgledata trådløst til modtageren, og modtageren skriver nøglerne gennem netværkskablets PLC-system DB-området; modtageren læser de data, der skal vises, fra det udpegede DB-område, og returnerer derefter dataene til håndhjulets displayskærm. Brugeren kan tilpasse basisadressen for læse- og skrive-DB-området på håndhjulet, so that the handwheel can read and write the data in the DB area of the PLC.

b. Modtageren understøtter Siemens S7-protokollen. Gælder PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

I servertilstand, brugeren konfigurerer PLC læse- og skriveadressen gennem WGP-ETS konfigurationssoftwaren;Brug PLC-forbindelseskonfigurationsværktøjet til at konfigurere modtageren til klienttilstand. Efter konfiguration, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Specifik anvendelse

Specifik anvendelse af håndhjulsmodtager og Siemens PLC S7-200:

-en. Knappen på håndhjulet svarer til værdien af ​​BOOL-området indstillet af brugeren i PLC'en. Hvis der trykkes på knappen på håndhjulet, det tilsvarende BOOL-område er sandt, og hvornår den frigives, det er falsk, og basisadressen for BOOL-området kan indstilles via håndhjulet;

b. Håndhjulet kan aflæse værdien af ​​DB-området i PLC'en. En akse har 4 bytes af displaydata, og 6 akser har i alt 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Udseende introduktion

5.Modtagerterminal definition og kodningstabel

6.Udseende størrelse

 

 

]]>