Specifa apliko por Siemens – WixHC -Teknologio https://www.wixhc.cn Industria Gvidanto Wed, 05 Nov 2025 06:21:59 +0000 eo hourly 1 https://wordpress.org/?v=6.8.3 Kabligita elektronika manrado Instrukcia Manlibro https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Enkonduko de Produkto

Electronic handwheel is used for manual guidance, positioning, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.Product functional features
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 meters.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, axis selection, magnification, and other information.
3. Support emergency stop button, Ŝaltilo IO -signala eligo, and the hand wheel shutdown emergency stop is still valid.
4. Subtenas 6 Propraj butonoj, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Subtenas 6 aŭ 8 Aksa kontrolo, with switch IO signals that can be output to the system through IO wiring or communication.
6. Subtenas 3 aŭ 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulsoj/turno, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Produktaj Specifoj
Handwheel working power supply voltage DC24V/1A
Receiver power supply voltage DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10m
Receiver end cable length 1m
Receiver end network cable length 3m
Operating temperature -25℃<X<55℃
Anti-fall height 1m
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Enkonduko de Produkta Funkcio

Noto:
Emergency stop button:
Press the emergency stop button, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Propraj butonoj, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Press and hold the enable button, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Produkta akcesora diagramo

6. Gvidilo pri Instalado de Produktoj
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Dimensioj de instalado de ricevilo

6.3 Installation dimensions of aviation plugs

6.4 Diagramo de Referenca Elektro de Ricevilo
7.Instrukcioj pri Produkta Operacio

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Select magnification: Switch the magnification switch and select the magnification level you need.
7. Moving axis: Press and hold the enable button, select the axis selection switch, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Press the emergency stop button, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.Product Model Description

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : represents the number of axis selection switches, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Prizorgado
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Please avoid squeezing, falling, bumping, ktp. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Se ne uzata dum longa tempo, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Sekurecaj Informoj

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Se necesas riparo, Bonvolu kontakti la fabrikanton. Se la damaĝo estas kaŭzita de memriparo, La fabrikanto ne provizos garantion

 

]]> Dediĉita sendrata fora por CNC -vertikalaj lavaj operaciaj instrukcioj https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Enkonduko de Produkto

The dedicated wireless remote contro for CNC vertical lathes is used for manual guidance, positioning, tool setting, and other operations on CNC vertical machine tools. This product adopts wireless transmission technology, eliminating the need for traditional spring wirae connections, reducing equipment failures caused by cables, and eliminating the disadvantages of cable dragging and oil stains, making operation more convenient. It is widely applicable to various vertical lathes such as CNC vertical lathes, single-column vertical lathes, and double-column vertical lathes.It can also be adapted to a variety of CNC systems on the market, such as Siemens,
Mitsubishi, Fanuc, and Syntec.

2. Product functional features

1. Adopting 433 MHz wireless communication technology, with a wireless operating distance of 40 meters.
2.Adopting automatic frequency hopping function and using 32 sets of wireless remote controllers simultaneously, without affecting each other.
3. Support emergency stop button, switch IO signal output.
4. Subtenas 2 Agordeblaj butonoj, with switch-type IO signal output.
5. Subtenas -2 axis control.
6. Supports 3-level magnification control.
7. Support the enable button function, which can output on/off IO signals and control axis selection, multiplying factor, and encoder.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Supports pulse encoder, with a specification of 100 pulses per revolution.
3. Produktaj Specifoj
Operating voltage and current of wireless remote
3V/14MA
Battery specifications 2 AA alkaline batteries, size 5
Low voltage alarm range of wireless remote < 2.3V
Receiver power supply voltage DC5V-24V/A
Receiver emergency stop output load range AC125V-1A/DC30V-2A
Receiver enable output load range
AC125V-1A/DC30V-2A
Receiver custom button output load range DC24V/50mA
Receiver axis selection output load range DC24V/50mA
Receiver magnification output load range DC24V/50mA
Transmission power of handheld terminal
15dBm
Receiver receiving sensitivity -100dBm
Wireless communication frequency 433MHz frequency band
Wireless communication distance Barrier free distance of 40 metroj
Operation temperature -25℃ < X < 55℃
Anti fall height 1 (Metro)
Custom button quantity 2
4. Product Function Introduction



Notoj:

① Pulse encoder:
Press and hold the enable button, shake the pulse encoder, emit a pulse signal,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: Malalttensia alarmlumo, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
Press the emergency stop button, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (power switch):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Produkta akcesora diagramo

6. Gvidilo pri Instalado de Produktoj
6.1 Product installation steps

1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the equipment to the receiver via cables.
3.After the receiver is properly fixed, la anteno ekipita per la ricevilo devas esti konektita, and the outer end of the antenna should be installed or placed outside the electrical cabinet. Oni rekomendas meti ĝin sur la supro de la elektra kabineto por la plej bona signala efiko. It is prohibited to leave the antenna unconnected or place it inside the electrical cabinet, as this may result in the signal being unusable.
4. Fine, turn on the power switch of the handwheel, and you can operate the machine remotely using the handwheel.

6.2 Dimensioj de instalado de ricevilo

6.3 Diagramo de Referenca Elektro de Ricevilo

7. Instrukcioj pri produktaj operacioj
1. Power on the machine and the receiver. The receiver’s working indicator light flashes. Install the battery in the wireless electronic handwheel, secure the battery cover, Kaj
turn on the power switch of the wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. Select the coordinate axis: Press and hold the enable button, toggle the axis selection switch, and select the axis you want to operate.
3. Select magnification: Press and hold the enable button, toggle the magnification switch,and select the desired magnification level.
4. Moving axis: Press and hold the enable button, select the axis selection switch, select the magnification switch, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. Press and hold any custom button, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. Press the emergency stop button, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled,release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
7. If the handwheel is not operated for a period of time, it will automatically enter sleep mode to reduce power consumption. When it is used again, the handwheel can be activated by pressing the enable button.
8. If the handwheel is not used for a long time, it is recommended to switch the handwheel shaft to the OFF position, turn off the handwheel power, and extend the battery life.

8. Product Model Description

① :ZTWGP represents the appearance style
②：Pulse output parameters:
01: Indicates that the pulse output signal is A, B; Pulse voltage 5V; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; Pulse voltage 5V; pulse quantity 100PPR.
04：Indicates a low-level NPN open circuit output, with pulse output signals of A and B;The number of pulses is 100PPR.
05：Indicates high-level PNP source output, with pulse output signals of A and B; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 represents 2 axes.
④：Represents the type of axis selection switch signal, A represents point-to-point output signal, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, A represents point-to-point output signal, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 represents 2 custom buttons.
⑦：Represents the power supply for the system handwheel, Kaj 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

10. Product maintenance

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Please avoid squeezing, falling, bumping, ktp. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Se ne uzata dum longa tempo, please store the handwheel in a clean and safe place. Dum stokado kaj transportado, attention should be paid to moisture and shock resistance.

11. Sekurecaj Informoj

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Se necesas riparo, Bonvolu kontakti la fabrikanton. Se la damaĝo estas kaŭzita de memriparo, La fabrikanto ne provizos garantion

]]> Fanuc dediĉita sendrata elektronika manrako https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Majo 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Enkonduko de Produkto

Wireless electronic handwheel is used for manual guidance, positioning, tool alignment,and other operations on CNC machine tools. This product adopts wireless transmission technology, eliminating the traditional spring wire connection, reducing equipment failures caused by cables, eliminating the disadvantages of cable dragging and oil stains, kaj farante operacion pli oportuna. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Produktaj Trajtoj
1. Adoptu 433MHz -sendratan komunikan teknologion, sendrata operacia distanco estas 40 metroj;
2. Adoptu aŭtomatan oftan saltetan funkcion, uzi 32 sets of wireless remote controllers at the same time without affecting each other;
3. Support emergency stop button, Ŝaltilo IO -signala eligo, connected to the system through IO wiring;
4. Subteno 4 Propraj butonoj, Ŝalti IO -signalon, elira signalo al la sistemo per IO-liga protokolo;
5. Subtenu rapidan movadbutonon + kaj butono -, Premu kaj tenu la butonon por anstataŭigi la manrakon por movi la maŝinon;
6. Subtenu 6-aksan kontrolon, Ŝalti IO -signalon, elira signalo al la sistemo per IO-liga protokolo;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Notoj:
①Emergency stop button:
Press the emergency stop button, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Propraj butonoj, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Diagramo de Produktaj Akcesoraĵoj

6.Gvidilo pri Instalado de Produktoj

6.1 Produktaj Instalaj Paŝoj

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Riferu al nia kabla diagramo de ricevilo, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3. Post kiam la ricevilo estas fiksita, la anteno ekipita per la ricevilo devas esti konektita,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Oni rekomendas meti ĝin sur la supro de la elektra kabineto por la plej bona signala efiko. It
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Fine, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 Dimensioj de instalado de ricevilo

6.3 Diagramo de Referenca Elektro de Ricevilo

7. Prizorgado kaj Prizorgo

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
la serva vivo;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Please avoid squeezing, falling, bumping, ktp. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Se ne uzata dum longa tempo, please store the handwheel in a clean and safe place;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Bonvolu legi la instrukciojn zorge antaŭ ol uzi. Ne-profesiuloj estas malpermesitaj
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Se necesas riparo, Bonvolu kontakti la fabrikanton. Se la damaĝo estas kaŭzita de mem-riparo,
the manufacturer will not provide warranty.

]]> Siemens Dediĉita Sendrata Elektronika Handwheel XWGP-ETS https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Majo 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Enkonduko de fora kontrolo

A.produkta comPOSition
Siemens Real-Time Coordinate Display Wireless Electronic Handwheel konsistas el du partoj: Elektronika manrako + Ricevilo;

B.Characteristics

*Subtenu Siemens Plc: S7-200/-300/-1200；Subtenu realtempan montradon de Siemens-sistemaj kunordigitaj valoroj；
*La sendrata transdona distanco estas malfermita 40 metroj, Aŭtomata frekvenca saltoteknologio, povas uzi 32 aroj de ekipaĵo samtempe;
*La elektronika manroko estas funkciigita de 2 AA -baterioj kaj uzeblaj por pli ol 30 tagoj;
*La ricevilo estas ekipita per ekstera anteno por plibonigi la signalon kaj estas facile instali;
*Elektronika Handwheel Support: Unu 100ppr -kodigilo 、Unu 6-rapideca aksa elekta ŝaltilo 、 Unu 3-rapideca grandiga ŝaltilo;
*Elektronikaj manaj subtenoj 6 Propraj butonoj, responda al Siemens PLC -adreso, kiu povas esti libere programita;

*6 Propraj butonoj povas kontroli 6 Ŝaltilaj eliroj;
*La ekrano montras la PLC -respondan registran koordinatan valoron en reala tempo, and supports 6-axis display of real-time coordinates.

2.Aplika kampo

Programebla CNC -fora kontrolo estas vaste uzata en diversaj CNC -kampoj kiel lasera gravuraĵa sistemo, CNC -Muelilo, CNC -Maŝina Centro, Gantry Machine Tool, ktp

3. Enkonduko al la funkcia principo

1） Elektronika manplato estas konektita al PLC per Ethernet -ricevilo

A.La manplato transdonas la ŝlosilajn datumojn sendrate al la ricevilo, kaj la ricevilo verkas la ŝlosilojn per la reto -kabla PLC -sistemo DB -areo; La ricevilo legas la datumojn aperintajn el la nomumita DB -areo, kaj tiam redonas la datumojn al la ekrano de Handwheel Display. La uzanto povas agordi la bazan adreson de legado kaj skribado de DB -areo sur la manplato, so that the handwheel can read and write the data in the DB area of the PLC.

b. La ricevilo subtenas protokolon Siemens S7. Validas por PLC S7-200, PLC S7-300 and PLC S7-1200.

C. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

En la servila reĝimo, La uzanto agordas la PLC-legadon kaj skriban adreson per la WGP-ETS-Agorda Programaro;Uzu la PLC -Konektan Agordan Ilon por agordi la ricevilon en klientan reĝimon. Post agordo, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Specifa Apliko

Specifa Apliko de Handwheel-Ricevilo kaj Siemens PLC S7-200:

a. La butono sur la manplato respondas al la valoro de la bool -areo starigita de la uzanto en la PLC. Se la butono de la manplato estas premita, La responda bool -areo estas vera, kaj kiam ĝi estas liberigita, ĝi estas falsa, kaj la baza adreso de la bool -areo povas agordi tra la manrako;

b. La manplato povas legi la valoron de la DB -areo en la PLC. Unu akso havas 4 bajtoj de ekranaj datumoj, Kaj 6 Aksoj havas entute 24 bajtoj. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Aspekto Enkonduko

5.Ricevilo -fina difino kaj kodiga tablo

6.Aspekta grandeco

 

 

]]>