Tukoy na aplikasyon para sa Siemens – Teknolohiya ng WIXHC https://www.wixhc.cn Industry Leader Wed, 05 Nov 2025 06:21:59 +0000 fil hourly 1 https://wordpress.org/?v=6.8.3 Manu -manong Wired Electronic Handwheel Instruction Manual https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Panimula ng produkto

Electronic handwheel is used for manual guidance, pagpoposisyon, Pag -align ng tool, at iba pang mga operasyon sa mga tool ng CNC machine. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, pagpapalaki, buttons, andother signals through communication.
2.Mga tampok na pagganap ng produkto
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 meters.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, axis selection, pagpapalaki, and other information.
3. Suportahan ang pindutan ng Emergency Stop, Lumipat ng output ng signal ng IO, and the hand wheel shutdown emergency stop is still valid.
4. Sumusuporta 6 pasadyang mga pindutan, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Sumusuporta 6 o 8 kontrol ng axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Sumusuporta 3 o 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Suportahan ang Pulse Encoder, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Mga pagtutukoy ng produkto
Handwheel working power supply voltage DC24V/1A
Receiver power supply voltage DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10m
Receiver end cable length 1m
Receiver end network cable length 3m
Operating temperature -25℃<X<55℃
Anti-fall height 1m
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Panimula ng Pag -andar ng Produkto

Tandaan:
Emergency stop button:
Pindutin ang pindutan ng Emergency Stop, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 pasadyang mga pindutan, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Press and hold the enable button, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Diagram ng accessory ng produkto

6. Gabay sa Pag -install ng Produkto
6.1 Mga Hakbang sa Pag -install ng Produkto
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Sumangguni sa aming diagram ng mga kable ng tatanggap at ihambing ito sa iyong kagamitan sa site. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Matapos ayusin ang tatanggap, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Mga Dimensyon ng Pag -install ng Receiver

6.3 Installation dimensions of aviation plugs

6.4 Ang diagram ng sanggunian ng mga kable ng tatanggap
7.Mga tagubilin sa operasyon ng produkto

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Select magnification: Switch the magnification switch and select the magnification level you need.
7. Moving axis: Press and hold the enable button, select the axis selection switch, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Pindutin ang pindutan ng Emergency Stop, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.Product Model Description

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : represents the number of axis selection switches, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Pagpapanatili
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Mangyaring iwasan ang pagpisil, bumabagsak, Bumping, atbp. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Kung hindi ginagamit ng mahabang panahon, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Impormasyon sa Kaligtasan

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Kung kinakailangan ang pag -aayos, Mangyaring makipag -ugnay sa tagagawa. Kung ang pinsala ay sanhi ng pag -aayos ng sarili, Ang tagagawa ay hindi magbibigay ng warranty

 

]]> Nakatuon na wireless remote para sa CNC Vertical Lathe Operation Instructions https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Panimula ng produkto

The dedicated wireless remote contro for CNC vertical lathes is used for manual guidance, pagpoposisyon, tool setting, and other operations on CNC vertical machine tools. Ang produktong ito ay nagpatibay ng teknolohiyang paghahatid ng wireless, eliminating the need for traditional spring wirae connections, Pagbabawas ng mga pagkabigo sa kagamitan na dulot ng mga cable, and eliminating the disadvantages of cable dragging and oil stains, making operation more convenient. It is widely applicable to various vertical lathes such as CNC vertical lathes, single-column vertical lathes, and double-column vertical lathes.It can also be adapted to a variety of CNC systems on the market, such as Siemens,
Mitsubishi, Fanuc, and Syntec.

2. Mga tampok na pagganap ng produkto

1. Adopting 433 MHz wireless communication technology, na may isang wireless na distansya ng operating ng 40 meters.
2.Adopting automatic frequency hopping function and using 32 sets of wireless remote controllers simultaneously, without affecting each other.
3. Suportahan ang pindutan ng Emergency Stop, switch IO signal output.
4. Sumusuporta 2 napapasadyang mga pindutan, with switch-type IO signal output.
5. Sumusuporta -2 axis control.
6. Supports 3-level magnification control.
7. Support the enable button function, which can output on/off IO signals and control axis selection, multiplying factor, and encoder.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Supports pulse encoder, with a specification of 100 pulses per revolution.
3. Mga pagtutukoy ng produkto
Operating voltage and current of wireless remote
3V/14MA
Battery specifications 2 AA alkaline batteries, size 5
Low voltage alarm range of wireless remote < 2.3V
Receiver power supply voltage DC5V-24V/A
Receiver emergency stop output load range AC125V-1A/DC30V-2A
Receiver enable output load range
AC125V-1A/DC30V-2A
Receiver custom button output load range DC24V/50mA
Receiver axis selection output load range DC24V/50mA
Receiver magnification output load range DC24V/50mA
Transmission power of handheld terminal
15dBm
Receiver receiving sensitivity -100dBm
Wireless communication frequency 433MHz frequency band
Wireless communication distance Barrier free distance of 40 metro
Operation temperature -25℃ < X < 55℃
Anti fall height 1 (metro)
Custom button quantity 2
4. Panimula ng Pag -andar ng Produkto



Mga Tala:

① Pulse encoder:
Press and hold the enable button, shake the pulse encoder, emit a pulse signal,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: Mababang ilaw ng alarma ng boltahe, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
Pindutin ang pindutan ng Emergency Stop, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (power switch):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Diagram ng accessory ng produkto

6. Gabay sa Pag -install ng Produkto
6.1 Mga Hakbang sa Pag -install ng Produkto

1. I -install ang tatanggap sa de -koryenteng gabinete sa pamamagitan ng buckle sa likod, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Sumangguni sa aming diagram ng mga kable ng tatanggap at ihambing ito sa iyong kagamitan sa site. Connect the equipment to the receiver via cables.
3.After the receiver is properly fixed, Ang antena na nilagyan ng tatanggap ay dapat na konektado, and the outer end of the antenna should be installed or placed outside the electrical cabinet. Inirerekomenda na ilagay ito sa tuktok ng elektrikal na gabinete para sa pinakamahusay na epekto ng signal. It is prohibited to leave the antenna unconnected or place it inside the electrical cabinet, as this may result in the signal being unusable.
4. Sa wakas, turn on the power switch of the handwheel, and you can operate the machine remotely using the handwheel.

6.2 Mga Dimensyon ng Pag -install ng Receiver

6.3 Ang diagram ng sanggunian ng mga kable ng tatanggap

7. Mga tagubilin sa operasyon ng produkto
1. Power on the machine and the receiver. The receiver’s working indicator light flashes. Install the battery in the wireless electronic handwheel, secure the battery cover, at
turn on the power switch of the wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. Select the coordinate axis: Press and hold the enable button, toggle the axis selection switch, and select the axis you want to operate.
3. Select magnification: Press and hold the enable button, toggle the magnification switch,and select the desired magnification level.
4. Moving axis: Press and hold the enable button, select the axis selection switch, select the magnification switch, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. Press and hold any custom button, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. Pindutin ang pindutan ng Emergency Stop, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled,release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
7. If the handwheel is not operated for a period of time, it will automatically enter sleep mode to reduce power consumption. When it is used again, the handwheel can be activated by pressing the enable button.
8. If the handwheel is not used for a long time, it is recommended to switch the handwheel shaft to the OFF position, turn off the handwheel power, and extend the battery life.

8. Product Model Description

① :ZTWGP represents the appearance style
②：Pulse output parameters:
01: Indicates that the pulse output signal is A, B; Pulse voltage 5V; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; Pulse voltage 5V; pulse quantity 100PPR.
04：Indicates a low-level NPN open circuit output, with pulse output signals of A and B;The number of pulses is 100PPR.
05：Indicates high-level PNP source output, with pulse output signals of A and B; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 represents 2 axes.
④：Represents the type of axis selection switch signal, A represents point-to-point output signal, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, A represents point-to-point output signal, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 represents 2 custom buttons.
⑦：Represents the power supply for the system handwheel, at 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

10. Product maintenance

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Mangyaring iwasan ang pagpisil, bumabagsak, Bumping, atbp. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Kung hindi ginagamit ng mahabang panahon, Mangyaring itabi ang handwheel sa isang malinis at ligtas na lugar. Sa panahon ng pag -iimbak at transportasyon, attention should be paid to moisture and shock resistance.

11. Impormasyon sa Kaligtasan

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Kung kinakailangan ang pag -aayos, Mangyaring makipag -ugnay sa tagagawa. Kung ang pinsala ay sanhi ng pag -aayos ng sarili, Ang tagagawa ay hindi magbibigay ng warranty

]]> FanUC Dedicated Wireless Electronic Handwheel https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Mayo 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Panimula ng produkto

Ang wireless electronic handwheel ay ginagamit para sa manu -manong patnubay, pagpoposisyon, Pag -align ng tool,at iba pang mga operasyon sa mga tool ng CNC machine. Ang produktong ito ay nagpatibay ng teknolohiyang paghahatid ng wireless, Tinatanggal ang tradisyunal na koneksyon ng wire wire ng tagsibol, Pagbabawas ng mga pagkabigo sa kagamitan na dulot ng mga cable, Tinatanggal ang mga kawalan ng pag -drag ng cable at mga mantsa ng langis, at paggawa ng operasyon na mas maginhawa. Ang modelong ito ng wireless electronic handwheel ay isang dedikadong handwheel para sa fanuc system. Ang mga coordinate ng system ng FANUC ay ipinapakita sa real-time sa handwheel screen sa pamamagitan ng IO-Link Protocol, at ang pagpili ng axis,pagpapalaki, at mga signal ng pindutan ay direktang konektado sa system sa pamamagitan ng IO-Link Protocol, reducing wiring.

2. Mga Tampok ng Produkto
1. Gumawa ng 433MHz Wireless Communication Technology, Ang distansya ng operasyon ng wireless ay 40 metro;
2. Magpatibay ng awtomatikong frequency hopping function, Gumamit 32 mga hanay ng mga wireless remote controller sa parehong oras nang hindi nakakaapekto sa bawat isa;
3. Suportahan ang pindutan ng Emergency Stop, Lumipat ng output ng signal ng IO, Nakakonekta sa system sa pamamagitan ng mga kable ng IO;
4. Suporta 4 pasadyang mga pindutan, Lumipat ng signal ng IO, Output signal sa system sa pamamagitan ng IO-Link Protocol;
5. Suportahan ang mabilis na pindutan ng paggalaw + at pindutan -, Pindutin nang matagal ang pindutan upang palitan ang handwheel upang ilipat ang makina;
6. Suportahan ang 6-axis control, Lumipat ng signal ng IO, Output signal sa system sa pamamagitan ng IO-Link Protocol;
7. Suportahan ang 1x,10x, 100X Control . Suportahan ang signal ng L0 L0, at mga signal ng output sa system sa pamamagitan ng IO-Link Protocol;
8. Suportahan ang pag -andar ng pindutan ng pindutan, Kumonekta sa system sa pamamagitan ng mga kable ng IO, at control encoder paganahin nang sabay;
9. Suportahan ang Pulse Encoder, 100 pulses/bilog, I -access ang interface ng handwheel ng MPG sa pamamagitan ng pag -output ng signal ng pag -encode ng AB;

3.Mga pagtutukoy ng produkto

4.Mga Tampok ng Produkto

Mga Tala:
①emergency stop button:
Pindutin ang pindutan ng Emergency Stop, Ang dalawang emergency stop IO output sa tatanggap ay na -disconnect, at ang lahat ng mga pag -andar ng handwheel ay hindi wasto. Pagkatapos ay pinakawalan ang emergency stop, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom na mga pindutan:
4 pasadyang mga pindutan, Ang bawat pindutan ay tumutugma sa isang IO output point sa tatanggap, Nakakonekta sa system sa pamamagitan ng Iolink. Karaniwan, the ~ button is set as a high-speed button.
④AXIS SELECTION SWITCH:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
Mga pindutan ng ⑤Shortcut:
Pindutin ang pindutan ng Shortcut na "+" upang ilipat ang makina pasulong, at pindutin ang maikling pindutan ng gupit na "-" upang ilipat ang makina nang negatibo. This can replace turning the hand wheel to move the machine.
⑥able button:
Pindutin at hawakan ang alinman sa mga pindutan ng Paganahin sa magkabilang panig at iling ang Pulse Encoder upang maging epektibo. At ang dalawang pangkat ng paganahin ang mga output ng IO sa tatanggap ay nakabukas. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Pindutin nang matagal ang pindutan ng Paganahin at iling ang Pulse Encoder upang magpadala ng isang pulso
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Diagram ng mga accessory ng produkto

6.Gabay sa Pag -install ng Produkto

6.1 Mga Hakbang sa Pag -install ng Produkto

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Sumangguni sa aming diagram ng mga kable ng tatanggap, Ihambing ito sa iyong mga kagamitan sa site, at kumonekta
the equipment to the receiver via cables.
3. Matapos naayos ang tatanggap, Ang antena na nilagyan ng tatanggap ay dapat na konektado,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Inirerekomenda na ilagay ito sa tuktok ng elektrikal na gabinete para sa pinakamahusay na epekto ng signal. Ito
ay ipinagbabawal na iwanan ang antena na hindi nauugnay o ilagay ang antena sa loob ng gabinete ng elektrikal,
which may cause the signal to be unusable.
4.Sa wakas, I -on ang switch ng power ng handwheel at maaari mong patakbuhin ang makina sa pamamagitan ng
handwheel remote control.

6.2 Mga Dimensyon ng Pag -install ng Receiver

6.3 Ang diagram ng sanggunian ng mga kable ng tatanggap

7. Pagpapanatili at pangangalaga

1. Mangyaring gamitin ito sa isang tuyong kapaligiran na may normal na temperatura at presyon upang mapalawak ang
Buhay ng Serbisyo;
2. Mangyaring iwasan ang paggamit nito sa mga hindi normal na kapaligiran tulad ng mga bula ng ulan at tubig upang mapalawak
ang buhay ng serbisyo;
3. Mangyaring panatilihing malinis ang hitsura ng handwheel upang mapalawak ang buhay ng serbisyo;
4. Mangyaring iwasan ang pagpisil, bumabagsak, Bumping, atbp. Upang maiwasan ang pinsala sa mga bahagi ng katumpakan
sa loob ng handwheel o maging sanhi ng mga error sa katumpakan;
5. Kung hindi ginagamit ng mahabang panahon, Mangyaring itabi ang handwheel sa isang malinis at ligtas na lugar;
6. Pay attention to moisture and shock during storage and transportation.

8. Impormasyon sa Seguridad

1. Mangyaring basahin nang mabuti ang mga tagubilin bago gamitin. Ang mga hindi propesyonal ay ipinagbabawal
operating.
2. Mangyaring palitan ang baterya sa oras kung ang baterya ay masyadong mababa upang maiwasan ang mga pagkakamali na dulot ng
insufficient power causing the handwheel to be unable to operate.
3. Kung kinakailangan ang pag -aayos, Mangyaring makipag -ugnay sa tagagawa. Kung ang pinsala ay sanhi ng pag-aayos ng sarili,
the manufacturer will not provide warranty.

]]> Ang mga Siemens ay nakatuon ng wireless electronic handwheel xwgp-et https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Mayo 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Introduction of remote control

a.Product Composition
Siemens real-time coordinate display wireless electronic handwheel consists of two parts: electronic handwheel + receiver;

b.Characteristics

*Suportahan ang Siemens plc: S7-200/-300/-1200；Suportahan ang real-time na pagpapakita ng mga halaga ng coordinate system ng SIEMENS；
*Bukas ang wireless na distansya ng paghahatid 40 metro, automatic frequency hopping technology, can use 32 sets of equipment at the same time;
*The electronic handwheel is powered by 2 AA batteries and can be used for more than 30 araw;
*The receiver is equipped with an external antenna to enhance the signal and is easy to install;
*Electronic handwheel support: Isang 100ppr encoder 、Isang 6-speed axis seleksyon switch 、 Isang 3-speed magnification switch;
*Electronic handwheel supports 6 pasadyang mga pindutan, corresponding to Siemens PLC address, na maaaring malayang na -program;

*6 Maaaring kontrolin ng mga pasadyang pindutan 6 Lumipat ng mga output;
*The display screen displays the PLC corresponding register coordinate value in real time, and supports 6-axis display of real-time coordinates.

2.Application field

Programmable CNC remote control is widely used in various CNC fields such as laser engraving system, CNC Milling Machine, CNC Machining Center, gantry machine tool, atbp.

3. Introduction to the working principle

1）Electronic handwheel is connected to PLC via Ethernet receiver

a.The handwheel transmits the key data wirelessly to the receiver, and the receiver writes the keys through the network cable PLC system DB area; the receiver reads the data to be displayed from the designated DB area, and then returns the data to the handwheel display screen. The user can customize the base address of reading and writing DB area on the handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. The receiver supports Siemens S7 protocol. Applies to PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

In the server mode, the user configures the PLC read and write address through the WGP-ETS configuration software;Use the PLC connection configuration tool to configure the receiver into client mode. After configuration, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Specific application

Specific application of handwheel receiver and Siemens PLC S7-200:

a. The button on the handwheel corresponds to the value of the BOOL area set by the user in the PLC. If the button of the handwheel is pressed, the corresponding BOOL area is true, and when it is released, it is false, and the base address of the BOOL area can be set through the handwheel;

b. The handwheel can read the value of the DB area in the PLC. One axis has 4 bytes of display data, at 6 axes have a total of 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Appearance introduction

5.Receiver terminal definition and coding table

6.Appearance size

 

 

]]>