Programmable CNC Wireless Remote Control PHB06B

Paglalarawan

 

1.Product Introduction

The programmable CNC remote control PHB06B is suitable for wireless
remote control operation of various CNC systems. It supports users to
customize programming and develop button functions to realize remote
control of various functions on the CNC system; it supports users to
customize programming and develop display content to realize dynamic
display of system status; the remote control comes with a rechargeable
battery and supports Type-C interface charging.

2.Product features

1. Using 433MHZ wireless communication technology, the wireless operation
distance is 80 metro;
2. Using automatic frequency hopping function, 32 sets of wireless remote
controllers can be used at the same time without affecting each other;
3. Suporta 12 custom button programming;
4. Support 2.8-inch screen, display content custom programming;
5. Suporta 1 6-speed axis selection switch, which can be custom programmed;
6. Suporta 1 7-speed magnification switch, which can be custom programmed;
7. Suporta 1 electronic handwheel, 100 pulses/turn;
8. Support standard Type-C charging; 5V-2A charging specification; battery
specification 18650/12580mWh battery.

3.Paggawa ng prinsipyo

4. Product specifications

5.Product function introduction

Notes：
①Power switch：
Control hand wheel to open and close

②Enable buttons on both sides：
The enabling button must be pressed to crank the hand wheel;

③Custom button area
12 buttons arranged in 3X4, programming na tinukoy ng gumagamit;

④Axis selection, magnification switch
1 6-position axis selection switch, which can be customized and programmed;
1 7-position ratio switch, which can be customized and programmed

⑤ Emergency stop switch:
Handwheel emergency stop switch;

⑥Display area:
Can display current power, signal, and customized display content;

⑦Electronic hand wheel：
1 electronic handwheel, 100 pulses/turn.

⑧Charging port:

Built-in rechargeable battery, charged using Type-C charger, boltahe ng pagsingil 5V,
kasalukuyang 1A-2A; charging time 7 oras;

6.diagram ng mga accessory ng produkto

7.Gabay sa Pag install ng Produkto

1. Insert the USB receiver into the computer, ang computer ay awtomatikong
recognize and install the USB device driver without manual installation;
2. Ipasok ang remote control sa charger. Pagkatapos ng baterya ay ganap na na charge, turn
on the power switch, turn on the remote control, and the display shows normal, which
means the power-on is successful;
3. After powering on, you can perform any button operation. The remote control can
support dual button operation at the same time. When you press any button, a black
square will appear next to the signal on the remote control, indicating that the button
is valid.

8.Product Operation Instructions
Before product development and use, you can use the Demo software we provide to test
the buttons and display of the remote control, or use the Demo as a reference routine for
future programming development;
Before using the Demo software, please plug the USB receiver into the computer, make
sure the remote controller has sufficient power, turn on the power switch, at pagkatapos ay gamitin ito;
Kapag ang anumang pindutan sa remote control ay pinindot, the test software Demo will display the
corresponding key value. Pagkatapos ilabas ito, ang key value display ay nawawala, indicating that
the button upload is normal.

 

9.Pag troubleshoot ng Produkto

 

10. Pagpapanatili at pangangalaga

1. Mangyaring gamitin ito sa isang tuyong kapaligiran na may normal na temperatura at presyon upang mapalawak
ang buhay ng serbisyo;
2. Huwag gumamit ng matatalim na bagay upang hawakan ang key area upang palawigin ang buhay ng serbisyo ng susi;
3. Mangyaring panatilihin ang key area malinis upang mabawasan ang key wear;
4. Iwasan ang pagpiga at pagbagsak upang maging sanhi ng pinsala sa remote control;
5. Kung hindi gagamitin nang matagal, please remove the battery and store the remote control and
battery in a clean and safe place;
6. Bigyang pansin ang kahalumigmigan sa panahon ng imbakan at transportasyon.

11.Impormasyon sa Kaligtasan

1. Mangyaring basahin nang mabuti ang mga tagubilin bago gamitin. Non-professionals are prohibited
from operating.
2. Please use the original charger or a charger produced by a regular manufacturer with
the same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing
the remote control to be unresponsive.
4. Kung kinakailangan ang pag aayos, Mangyaring makipag ugnay sa tagagawa. If the damage is caused by
self-repair, ang tagagawa ay hindi magbibigay ng warranty.