Crawler na wire e raica na misini ni automatic whoure sega ni out ni riumada DH12S-LLD .

Ivakamacala

ivoli

Ivakaraitaki: DH12S-LD

Na iyaya ni veitaratara kei na iyaya ni veitaratara .:crawler wire saw machine

Na ituki ni Bulabi ni kaukauwa

Ivakamacala: E rawa ni o digitaka e dua vei iratou na tolu na antennana.. Na kena musuki na bilo na antenna e ivakatagedegede ena default ..

na ivakamacalataki ni itukutuku.

Vakaraitaka na ivakamacala lekaleka .

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (E veiganiti na veisau qori ena gauna qori.)
Linear correction value: vakamuria: -99-99 (1 unit is about 0.02V)

Rawarawa: Na tikoyagataki ni bati e rawa ni lailai sara ., siava na kakana e vinaka cake.

Sa ivakadinadina ni tu na cakacaka.: Na ivakatakilakila ni wire e sega ni taleitaki .. Yalovinaka raica na kaukauwa ni kena ciqomi ., kaukauwa ni tale, na galala.

Na cakacaka ni kena cakacakataki na cakacaka ni lewa .

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, lesu tale na kaukauwa ni kaukauwa ki na kaukauwa ni kaukauwa;, andthe display will show the motor speed, vakasama tale mai ..

2.Large motor and speed regulation

Kala. “tara cake” dokadoka, the receiver’s large motor will turn on, and the display will show forward

Kala. “tara cake” Cakava na gauna ni tikina, the large motor of the receiver will turn on in reverse, and the display will show reverse

Vinaka ki na loma “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “tara cake” dokadoka, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Kala. “Na Veisau Bula” Cakava na gauna ni tikina, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Kala. “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Kala. “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

ivakarau:
Turn left in place: Vakarorogo ka taura na kena […] “Enable” na ibulukau, vuki “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Vakarorogo ka taura na kena […] “Enable” na ibulukau, vuki “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

Ni: press and hold the “Enable” drauniveva ka tara na […] “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.monayawa .

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: ivakarau, press and hold the “Enable” drauniveva ka tara na […] “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 me 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (era dau vakatabui na vakayagataki ilavo mai na kena modifying ka sega na veivakadonui .)

Some functions of the remote control can be adjusted through parameters. ivakarau, when the small motor speed S2 is 10, samuti ira na itosotoso ki liu/sova na tikina ena dua na iyatu ., and then push it down three times in a row to enter the parameter menu;
Vakaraitaki ira na paralasi .: choose to save or not save, then press the enable button to confirm the exit;
Sila oqo: the operating rated current of the cutting motor is 80% of this currentt;
E raica na ivoli .: automatic cutting control parameters, default 800, sa vakatabui na veivakararamataki .;
na lewe ni vanua ni veiqaravi .: automatic cutting control parameter. Ni sa mai yaco na veisau ena gauna oqo sa sivia na kena yaga oqo .,deceleration begins.
Ena 1119 ni yabaki.: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
E 2 na2.: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Laiva me: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Mo lako vata mai: the maximum speed of the small motor.
Na gauna oqo: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Na iyalayala ni gauna .: the default maximum speed of automatic cutting speed when turning on the machine.
iwiliwili taucoko: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Na iyalayala ni mataqali .: the maximum speed of the small motor during automatic cutting.
Vakabibi ena: maximum speed of large motor.

Na ivakarau ni veiliutaki ni matanitu ni itikotiko .

Raica na cala

Na iotioti ni kena vakadewataki na dodonu ni ivoli oqo e nodra ga na noda kabani ..