1. 12 kakana draudrau, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
Lewa vakayawa ni ua me baleta na 3D lima-axis laser musuki：PHB06B-Leisa
Ivakamacala
1.iTaba ni iTukutuku
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, veitokoni 12 kakana draudrau, and supports real-time display of system coordinates and status.
2.Na veika totoka
1. 12 kakana draudrau, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2 E dua na ivakamacala matailalai ., built-in battery specifications 18650/12775mWh.
3.Cakava na ivakavuvuli me baleta na ivakavuvuli me baleta na ivakavuvuli
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Ivakamacala: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.iVakamacala ni ivoli
| Na kaukauwa ni livaliva ni kaukauwa ni livaliva . | DC5V-DC24V |
| Button lifespan | 1,000,000 gauna |
| Operating Temperature |
-25e erau vakasama < sota < 55e erau vakasama
|
| Safe drop height | 1 tagane |
| Receiver port | Cakacaka |
| Number of buttons |
12
|
| Sega ni vula |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| Wireless communication distance | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | DC24V. |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Na iTalagi ni vakaloloma na
Sega ni dua na:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 kakana draudrau
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 pulses per revolution.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
Ciqoma na kena vakayagataki
IWasewase: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. Sa kerei mo ni vakayagataka ena dua na vanua mamaca ena katakata kei na veivakacokotaki me rawa ni vakalevutaki kina na kena bula ni veiqaravi ..
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, kei na so tale. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.oti
1. Yalovinaka wilika vakavinaka na idusidusi ni bera ni vakayagataki ka vakatabui ira na sega ni kenadau ena veiqaravi ..
2. If you repair it yourself and cause damage, the warranty will be void.
