De ôfstânskontrôle foar automatyske snijwurk fan spoar auto-seach sjoen is geskikt foar it seagen track type seach
snijmasjines. It brûkt de 485 Modbus RTU-protokol om de frekwinsje fan 'e linker- en rjochts te kontrolearjen
converters, Lykas de grutte kontrôlekontrôle fan 'e Motor Fremering Conversion Conversing en de foarkant, efterkant,
Lofts- en rjochter rjochtingskontrollers. En it kin de wurkromte fan 'e grutte motorfrekwinsje lêze
omrekkend troch de 485 Modbus RTU Protokol. Troch analysearjen en fergelykje de stroom fan 'e
grutte motor, De snelheid fan 'e linker- en rjochter spoaren kinne automatysk wurde oanpast yn echte tiid om
achieve automatic cutting function.

2. Produkt funksjonele funksjes

1. 433MHZ Wireless Communicess Technology oannimme, mei in draadloze operearjende ôfstân fan 100 meters.
2. ANDINNING FUNKSJOCHT FOARPEN HOPPENCY EN GEBRUK 32 sets fan draadloze ôfstânskontrollers
tagelyk, without affecting each other.
3. Unterstützt alle frekwinsje converters mei 485 Modbus RTU Protokol, en op it stuit kompatibele frekwinsje
Konverter brands omfetsje:Shanghai xielin, Fuji, Huichuan, Zhongchen, Oprjochtsje, en . Foar merken
dat binne net kompatibel, please contact us for customization.
4. Stipe snelheidsregeling, begjinnend, and current reading of large motor frequency converters.
5. Stypje links- en rjochter trackfrekwinsje omrekkend ramde regeljouwing, begjinnend, front, rêch, left and right control.
6. Stypje lineêre korreksje fan linker- en rjochterkantfrekwinsje converters om de masine te hâlden yn in
straight line.
7. Support Automatyske snijfunksje fan seach seach, oanpasse automatysk de linker- en rjochter spoar snelheid yn
real time according to the current information of the large motor.
8. It is ek kompatibel mei direkte io-útfierkontrôle foar motorstart en stopje, en analogevoltage útfier
control for motor speed.

3. Produkt spesifikaasjes

4. Produktfunksje ynlieding

Notysjes:
Ęscreen werjaan:

②MODE SWITCH:

③enable:
Kombinaasje knoppen, Guon operaasjes fereaskje de knop yn te hâlden foar operaasje,see the instructions for each switch for details.
④large Motor Skeakel:
Mei help fan in 3-snelheid Reset-skeakel, Dizze switch lûke kin de foarút- en reverse rotaasje fan 'e grutte motor kontrolearje. Nei it frij te litten, De steat sil bliuwe, en d'r sil oerienkomme mei oerienkommende byldskermen op it skerm. De S1 ↑ Pylk toant om foarút rotaasje oan, and the S1 ↓ arrow indicates everse rotation.
⑤small motor foarút / omkearde switch:
De lytse motor is foarsjoen fan in 3-snelheid sels-locking-switch foar it. Druk op de knop Ynsketten en dizze switch lûke kin de lytse motor kontrolearje om foarút te gean en efterút, En it oerienkommende werjefte sil ferskine op it skerm. De ↑↑-pylk fertsjintwurdiget foarút, and the ↓↓ arrow represents backward.
⑥ RJOCHTTROCH:
Mei help fan in multi beurt-kodearknop, Druk op de knop Ynskeakelje, draaie de knop rjochts, en werjaan de rjochte line korreksje: DF: De linker draai knob nimt ta troch 1 ienheid per rotaasje, en lofts
motor snelheid nimt ta troch 0.1 ienheid; Sla linksknop, RJOCHTSJOCHTJOCHTSJOCHTSJOCHT: DF: Rjochts, elke beurt fan 'e knop nimt ta troch 1 ienheid, en de snelheid fan 'e juste motor nimt ta
troch 0.1 unit.
⑦small Motor Turning Skeakelje:
Mei help fan in 3-snelheid Reset-skeakel, Doe't hânmjittich eksploitearre, De lytse motor kin wurde regele om links of rjochts te draaien. Ienris frijlitten, De ôfstânskontrôle sil dizze aksje automatysk stopje. Yn 'e foarút steat, As dizze switch wurdt draaid, It oerienkommende werjefte sil ferskine op it skerm. De ← ↑ Pylk toant linksôf, en de ↑ → Pylk toant Right-turn.when yn omkearde modus, Draai dizze skeakel en it oerienkommende werjaan sil ferskine op it skerm. De ← ↓ Pylk toant linksôf, and the ↓→ arrow indicates right turn.
⑧ Grutte regeling fan grutte motor:
Mei help fan in multi beurt-kodearknop, draaie 1 grid elke kear, de snelheidswearde fan 'e grutte motor feroaret troch sawat 0.2 ienheden. Fast rotation can quickly modify the speed value of the large motor.
⑨ Lytse regeling fan lytse motor:
Mei help fan in multi beurt-kodearknop, Yn hânmjittige modus, Druk op de knop Ynskeakelje en draai dan ien raster tagelyk，de snelheidswearde fan 'e linker- en rjochter lytse Motors feroaret troch sawat 0.1 ienheden, en rappe rotaasje kin de snelheidswearde fluch oanpasse fan 'e lytse motor. Automatyske modus, druk op de knop ynskeakelje en draaie ien raster tagelyk,De snelheidsgrinswearde F fan 'e lytse motorferoaringen troch sawat 0.1 ienheden. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote Control Power Switch
The remote control display screen is turned on.

5. Produkt accessoiry-diagram

6. Gids foar ynstallaasje fan produkt
6.1 Stappen foar ynstallaasje fan produkt
1. Ynstallearje de ûntfanger yn it elektryske kabinet fia de bik op 'e rêch, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Ferwize nei ús ûntfanger draaddiagram en fergelykje it mei jo apparatuer foar on-site. Connect the equipment to the receiver through wires.
3. Nei it befestigjen fan 'e ûntfanger, It is needsaaklik om de antenne te ferbinen dy't útrist is mei de ûntfanger en ynstalleare of te ynstallearjen of te pleatsen fan it bûtenkant fan 'e antenne bûten it elektryske kabinet. It wurdt oanrikkemandearre om it te pleatsen op 'e boppekant fan it elektryske kabinet foar it bêste sinjaaleffekt. It is ferbean om de antenne net te ferheegjen of te pleatsen as it yn it elektryske kabinet pleatst, as it may cause the signal to be unusable.
4. Úteinlik, Ynstallearje de batterij op 'e kontrôle fan' e ôfstân, draai de batterijdekking oan, en draaie de krêftwiksel oan 'e ôfstânskontrôle. Nei it skermôfbylding fan 'e ôfstân fan ôfstân toant it normale
Wurkynterface, remote control operations can be performed.

6.2 Untfange fan ynstallaasje Dimensions

6.3 Untfang fan ûntfangende referinsjediagram

7. Produktryske ynstruksjes
7.1 Ynstellings foar ôfstân fan kontrôle op ôfstân
METODE om de opnimmende parameters fan 'e ôfstân foar kontrôle yn te gean:

Skeakelje de modus oerskeakelje nei hânmjittige modus, oanpasse de snelheid fan 'e lytse motor oan 25 oan beide kanten, of 0, 10, 20, 40, 50 oan alle kanten, en draaie de foarútgong fan 'e grutte motor kontinu 3 kearen en del 3 kear;
Brûk de “Lytse motor snelheidskontrôle” Knop nei Flip-pagina's, Druk op de knop Ynskeakelje, en dan de Knop fan 'e lytse snelheidskontrôle draaie om parameters te feroarjen. Nei modifikaasje, Skeakelje de pagina oan it ein,útkieze “Rêde” útgean, en druk op de knop Ynskeakelje om it menu út te gean;
De parameters binne as folgjend:
Maksimum hjoeddeistige: feedback berik fan grutte motorrint, Set berik 15-200A, ôfwêzichheid 100;
Parameters foar snelheidskontrôle: Automatyske modus, Lytse motor fersnelt automatysk rapper as stadiger,de lytsere de rapper, SET RANGE 200-1500, ôfwêzichheid 800;
Deceleraasjeparameter: Stel de boppeste limyt yn wêrtroch de motor snelheid kin feroarje. As de hjoeddeistige feroaringen boppe dizze wearde, de deceleraasje sil foarkomme. De lytsere, de rapper de deceleraasje fan 'e linker- en rjochter motors, mei in berik fan 05-12 en in standert fan 06;
Fersnelling A1: De gruttere de motor snelheid, de rapper it nimt ta, mei in berik fan 00-06 en in standert fan 01;
Deceleration A2: De gruttere de motor snelheid, de rapper dat nimt ôf, mei in berik fan 00-06 en in standert fan 02;
Skea regeling ynskeakelje: Wurdt de regulaasje fan lytse motor snelheid ynskeakele? 00 net ynskeakelje, 01 mooglik meitsje, standert is 01;
Begjin sels-locking: Hâldt de grutte motor automatysk selsslúting neidat de foarút- en omkearde switches wurdt frijlitten? 00 hâldt net, 01 hâldt, default 01
Maksimum kuierjen: Maksimale snelheid fan lofts en rjochter motors, berik 10-100, ôfwêzichheid 50;
Cutting Aktuele: Maksimale snijwurk, werjûn op it skerm as IC-wearde, berik 15-160, default 30,
Yn oerienstimming mei IC: 30 werjûn op it skerm. De boppeste limyt fan dizze parameter is 80% fan 'e maksimale hjoeddeistige;
Standert snelheidsgrins: De standert lytse motor automatyske snijnelheid as se ynskeakele is yn it berik fan 0-100, mei in standert fan 10. It skerm toant F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatyske modus: Ynsteld op 00, De automatyske / hânmjittige switch is in modus switch. Ynsteld op 01, De automatyske / hânmjittige switch is ynsteld op de automatyske posysje, It display-skerm toant ferljochting, en de automatyske terminal-útfier op 'e ûntfanger is sletten. As ynsteld op hânmjittich, De automatyske útfiersteminaal wurdt loskeppele;
Fjile beheine ôfwiking: De boppeste limyt fan 'e automatyske snelheid fan' e lytse motor berik fan 00 nei 200, mei in standert fan 60 en in oerienkommende werjefte fan 6.0 op it skerm; Boppeste limyt fan werjaan wearde = snelheidsgrinsimpel X 0.1;
Maksimum Host: Maksimale snelheid fan 'e grutte motor, berik 10-100, ôfwêzichheid 50;
MBUS-apparatuer (ferplicht): Seleksje fan grut Frekwinsklûkferrin Converter Model, berik 00-03, ôfwêzichheid 03;
00- Shanghai Xiulin 01-Fuji
02-Invt 03-inovance (Zhongchen, Robicon)
SBUS-apparatuer (ferplicht): Seleksje fan lytse motorfrekwinsje, berik 00-05, ôfwêzichheid 03;

00- Shanghai Xiulin 01-Fuji
02-Invt 03-inovance (Zhongchen, Robicon)

04-Anschuanda 05-gjin

7.2 Parameter-ynstelling fan frekwinsje omrekkener
1. Kommando-boarne-seleksje: Kommandel fan kommunikaasje
2. Seleksje fan haadfrekwinsje: kommunikaasje jûn
3. Baud Rate: 19200
4. Data formaat: Gjin ferifikaasje, Data formaat<8-N-1>
5. Lokaal adres: Stel de linkerfrekwinsje omrekkening oan 1, De rjochterfrekwinsje omrekkener oan 2, en
the large motor frequency converter to 3
7.3 Ynstruksjes op ôfstân kontrôle
1. Krêft op 'e masine, Skeakelje de ôfstânskontrôle oan, Fier de backende op ôfstân kontrôle yn, set de
Remote Control Backen-parameters, Ynstelle foaral de lytse motor en grutte motorfrekwinsje
Konvermodellen: (Oerslaan dizze stap as de masine-fabrikant al hat ynsteld);
2. Stel de parameters fan 'e frekwinsje omrekkener yn (Oerslaan dizze stap as de masine-fabrikant
hat it al ynsteld);
3. Stel de ôfstânskontrôle yn nei hânmjittige modus, en brûk dan de ôfstânskontrôle om de masine te ferpleatsen nei
de wurkposysje;
4. Yn hânmjittige modus, Stel de snijstomte yn fan 'e grutte motor om te ic en de snelheid fan' e grutte motor
5. Wikselje nei Automatyske modus en set de snijvelheid fan 'e snelheidsnelheid F-wearde foar de lytse motor;
6. Yn automatyske modus, Skeakelje de grutte motor yn om nei foaren om de grutte motor te begjinnen, Dan draaie
de lytse motor oerskeakelje nei foarút as oarsom, en de ôfstânskontrôle ynkomt automatyske snijwurk
mode to start cutting.

8.Produkt Troubleshooting

9.Ûnderhâld
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. As net lang brûkt, Ferwiderje asjebleaft de batterij en bewarje de ôfstânskontrôle en batterij yn in skjin
and safe place.
6.Tidens opslach en ferfier, attention should be paid to moisture and shock resistance.

10. Feiligensynformaasje
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Ferfange asjebleaft de batterij op 'e tiid as de batterij te leech is om flaters te foarkommen dat se troch binne
net genôch krêft, which may result in the remote control being unable to operate.
3. As reparaasje nedich is, Nim dan kontakt op mei de fabrikant. As de skea wurdt feroarsake troch selsreparaasje, de fabrikant
will not provide warranty.

Model: DH01R-4W-26K

Applicable equipment:various industrial equipment

2.Produkt Accessories Diagram

Noat: You can choose one of the three antennas. The suction cup antenna is standard by default.

3.Product model description

Noat:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, mei in berik fan 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 nei 2, indicating that there are 1 nei 2 Analoge yngong(maximum 2 kanalen); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, Encce.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Funksjes

1）Maximum 26 Relaisútgongen;
2）Maximum 4 Kanalen fan Analog 0-10V-útfier (Display Range kin oanpast wurde): Unterstitteren 2 Kanalen fan útwreide isolearre isolearre Digital Potentiometer-útfier;
3）2 analog inputs; en werjûn op 'e op ôfstân kontrôle, It display-berik kin oanpast wurde
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Aa Batterijen, low power consumption design;
6） Wireless operation distance is 200 Meters;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.Remote control switch description

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

Low voltage: The remote control battery is too low, please replace the battery.

Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.

7.Remote control function operation instructions

1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, oansette de macht switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
As de knop Emergency stop wurdt yndrukt, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 nei 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 nei 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 nei 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;

8.Remote control electrical characteristics

9.Remote control size

The final interpretation right of this product belongs only to our company.

Model: DH12S-P6S

Applicable equipment:wire saw/blade saw machine

2.Produkt Accessories Diagram

Noat: You can choose one of the three antennas. The suction cup antenna is standard by default.

3.Remote control switch description

4.Displaycontent introduction

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(parameters adjustable)
Automatic cutting main motor setting current: Setting: 28 (parameters adjustable)
Swing arm motor speed: Swing: 0-50

Low voltage: The remote control battery is too low, please replace the battery.

Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.

5.Remote control function operation instructions

1）Turn on the remote control

When the receiver is powered on, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; install two AA batteries in the remote control, oansette de macht switch, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to forward, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to reverse, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, turn the “Forward/Reverse” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Turn the “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” omskeakelje, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Press and hold the “speed adjustment enable” button and rotate the “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “forward/reverse” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (users are prohibited from modifying it without permission)

Enter the parameter menu:Yn hânmjittige modus, when the main motor speed is 0, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enterthe parameter menu;
Exit the parameter menu: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, ôfwêzichheid 800, unit milli second,modification is prohibited;
Deceleraasjeparameter: When the cutting current change value exceeds this value, rapid deceleration begins, unit Ampere;
Fersnelling A1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Deceleration A2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, modification is prohibited;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, modification is prohibited;
Maksimum hjoeddeistige: The range of main motor feedback current, unit Ampere;
Maksimum Host: Remote control main motor speed adjustment display range;
Maksimum kuierjen: Invalid parameter;
Speed limit offset: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Automatic cutting, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;ienheid: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Remote control electrical characteristics

7.Remote control size

The final interpretation right of this product belongs only to our company.

Model: DH12S-LD

Applicable equipment:crawler wire saw machine

Produkt Accessories Diagram

Noat: You can choose one of the three antennas. The suction cup antenna is standard by default.

Remote control switch description

Displaycontent introduction

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (parameters adjustable)
Linear correction value: DF: -99-99 (1 unit is about 0.02V)

Low voltage: The remote control battery is too low, please replace the battery.

Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.

Remote control function operation instructions

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, oansette de macht switch, andthe display will show the motor speed, indicating successful startup.

2.Large motor and speed regulation

Turn the “forward/reverse” switch to forward, the receiver’s large motor will turn on, and the display will show forward

Turn the “forward/reverse” switch to reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse

Rotate the “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “forward/reverse” switch to forward, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Turn the “Forward/Reverse” switch to reverse, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Turn the “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Turn the “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

Yn hânmjittige modus:
Turn left in place: Press and hold the “Enable” knoop, turn the “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Press and hold the “Enable” knoop, turn the “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

Yn automatyske modus: press and hold the “Enable” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Automatic cutting

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Yn hânmjittige modus, press and hold the “Enable” button and rotate the “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 nei 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (users are prohibited from modifying it without permission)

Some functions of the remote control can be adjusted through parameters. Yn hânmjittige modus, when the small motor speed S2 is 10, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enter the parameter menu;
Exit the parameter menu: choose to save or not save, then press the enable button to confirm the exit;
Maksimum hjoeddeistige: the operating rated current of the cutting motor is 80% of this currentt;
Parameters foar snelheidskontrôle: automatic cutting control parameters, ôfwêzichheid 800, modification is prohibited;
Deceleraasjeparameter: automatic cutting control parameter. When the cutting current change value exceeds this value,deceleration begins.
Fersnelling A1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Begjin sels-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maksimum kuierjen: the maximum speed of the small motor.
Cutting Aktuele: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Standert snelheidsgrins: the default maximum speed of automatic cutting speed when turning on the machine.
Automatyske modus: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Speed limit offset: the maximum speed of the small motor during automatic cutting.
Maksimum Host: maximum speed of large motor.

Remote control electrical characteristics

Remote control size

The final interpretation right of this product belongs only to our company.

Model：ATWGP-12

Oanpassing systeem: alle CNC systemen mei handwheel ynterface

Dit produkt is in hânmjittich pulsgenerator brûkt mei CNC masine ark. It is in protte brûkt yn fjilden lykas CNC-masjine-ark, CNC draaibanken, ferwurkjen sintra,CNC gravuere en milling masines. Dit produkt brûkt draadloze oerdrachttechnology, elimineren de needsaak foar tradisjonele spring wire ferbinings, it ferminderjen fan flaters yn apparatuer feroarsake troch kabels, elimineren kabel drag, oalje en oare fersmoarging, en it meitsjen fan operaasje handiger. It produktpakket omfettet de ûntfanger en draadloze elektroanyske handwiel. De ûntfanger is ferbûn mei de CNC-apparatuer fia in netwurkkabel, en it elektroanyske hânwiel (hân puls generator) is ferbûn en kommunisearre mei de ûntfanger fia draadloze oerdrachttechnology. De operator hâldt it hânwiel en kin de ferbiningsbeperkingen fan 'e springdraad kwytreitsje en frij bewege. Foar grutskalige gantry milling, CNC draaibanken, reizgjende masine ark, snijden en oare applikaasjes, it brings great convenience and improves work efficiency.

Unterstützt ferskate systeemmerken lykas Siemens, Mitsubishi, Fanuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Mei help fan de 433MHZ draadloze kommunikaasje frekwinsje band, de draadloze operaasje ôfstân is 40 Meters;
2. ANDINNING FUNKSJOCHT FOARPEN HOPPENCY EN GEBRUK 32 sets fan draadloze handwielen tagelyk sûnder elkoar te beynfloedzjen;
3. Unterstützt needstopknop en 3 oanpaste knop switch útgongen;
4. Unterstützt meardere assen seleksjes fan 6 assen, 7-as, 8-as, 9-as, 10-as en 12-as, mei 3-snelheid en 4-snelheid fergrutting. As seleksje en fergrutting skeakels stypje ferskate sinjaaltypen lykas binêre kodearring, punt-to-punt, grize koade, Encce.;
5. Unterstützt 5V differinsjaal puls sinjaal, 24V puls sinjaal en oare puls sinjaal typen;
6. Low Power Consumpsje Design, 2 AA-batterijen kinne brûkt wurde foar mear as 1 moanne;
7. Unterstützt eksterne útwreidingsantenne, geskikt foar ferskate masine ark ynstallaasje omjouwings, garandearjen fan sinjaal stabiliteit;

Noat:
1. Status indicator ljocht:
Signal ljocht (links): It sinjaalljocht is altyd oan as it hânwiel wurdt betsjinne, en ljochtet net op as it net wurket;
Low voltage alarm ljocht (rjochts): As de batterij macht is te leech,it alarmljocht knippert of bliuwt oan;
2. Knop ynskeakelje:
Nei it drukken en hâlden fan de ynskeakelje knop, de as seleksje en fergrutting sinjalen wurde aktivearre, en de útfier fan de pulskoder is jildich;
3. Oanpaste knop:
In knop sûnder funksje kin in oerienkommende switchútfier op 'e ûntfanger kontrolearje;

COM1: Mienskiplike terminal foar as seleksje fergrutting sinjaal útfier; kin wurde ferbûn oan 0-24V iepenbier sinjaal
COM2: Mienskiplike terminal fan 3 oanpaste knop útgongen;

*As seleksje en fergrutting kinne wurde selektearre fia software, kodearring of punt-to-punt, nim dan rieplachtsje it personiel foar details

The final interpretation right of this product belongs to our company.

Oanpassing systeem: alle CNC systemen mei handwheel ynterface

Dit produkt is in hânmjittich pulsgenerator brûkt mei CNC masine ark. It is in protte brûkt yn fjilden lykas CNC-masjine-ark, CNC draaibanken, ferwurkjen sintra,CNC gravuere en milling masines. Dit produkt brûkt draadloze oerdrachttechnology, elimineren de needsaak foar tradisjonele spring wire ferbinings, it ferminderjen fan flaters yn apparatuer feroarsake troch kabels, elimineren kabel drag, oalje en oare fersmoarging, en it meitsjen fan operaasje handiger. It produktpakket omfettet de ûntfanger en draadloze elektroanyske handwiel. De ûntfanger is ferbûn mei de CNC-apparatuer fia in netwurkkabel, en it elektroanyske hânwiel (hân puls generator) is ferbûn en kommunisearre mei de ûntfanger fia draadloze oerdrachttechnology. De operator hâldt it hânwiel en kin de ferbiningsbeperkingen fan 'e springdraad kwytreitsje en frij bewege. Foar grutskalige gantry milling, CNC draaibanken, reizgjende masine ark, snijden en oare applikaasjes, it brings great convenience and improves work efficiency.

Unterstützt ferskate systeemmerken lykas Siemens, Mitsubishi, Fanuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Mei help fan de 433MHZ draadloze kommunikaasje frekwinsje band, de draadloze operaasje ôfstân is 40 Meters;
2. ANDINNING FUNKSJOCHT FOARPEN HOPPENCY EN GEBRUK 32 sets fan draadloze handwielen tagelyk sûnder elkoar te beynfloedzjen;
3. Unterstützt needstopknop en 3 oanpaste knop switch útgongen;
4. Unterstützt meardere assen seleksjes fan 6 assen, 7-as, 8-as, 9-as, 10-as en 12-as, mei 3-snelheid en 4-snelheid fergrutting. As seleksje en fergrutting skeakels stypje ferskate sinjaaltypen lykas binêre kodearring, punt-to-punt, grize koade, Encce.;
5. Unterstützt 5V differinsjaal puls sinjaal, 24V puls sinjaal en oare puls sinjaal typen;
6. Low Power Consumpsje Design, 2 AA-batterijen kinne brûkt wurde foar mear as 1 moanne;
7. Unterstützt eksterne útwreidingsantenne, geskikt foar ferskate masine ark ynstallaasje omjouwings, garandearjen fan sinjaal stabiliteit;

Noat:
1. Status indicator ljocht:
Signal ljocht (links): It sinjaalljocht is altyd oan as it hânwiel wurdt betsjinne, en ljochtet net op as it net wurket;
Low voltage alarm ljocht (rjochts): As de batterij macht is te leech,it alarmljocht knippert of bliuwt oan;
2. Knop ynskeakelje:
Nei it drukken en hâlden fan de ynskeakelje knop, de as seleksje en fergrutting sinjalen wurde aktivearre, en de útfier fan de pulskoder is jildich;
3. Oanpaste knop:
In knop sûnder funksje kin in oerienkommende switchútfier op 'e ûntfanger kontrolearje;

COM1: Mienskiplike terminal foar as seleksje fergrutting sinjaal útfier; kin wurde ferbûn oan 0-24V iepenbier sinjaal
COM2: Mienskiplike terminal fan 3 oanpaste knop útgongen;

*As seleksje en fergrutting kinne wurde selektearre fia software, kodearring of punt-to-punt, nim dan rieplachtsje it personiel foar details

The final interpretation right of this product belongs to our company.