Spesifike oanfraach foar Siemens – Wixhc Technology https://www.wixhc.cn Yndustry Leader Wed, 05 Nov 2025 06:21:59 +0000 fy hourly 1 https://wordpress.org/?v=6.8.3 Wired elektroanyske handwheel Instruction Manual https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Produkt Yntroduksje

Electronic handwheel is used for manual guidance, posysje, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, fergrutting, buttons, andother signals through communication.
2.Produkt funksjonele funksjes
1. Brûk in 6-core aviation plug kabel foar ferbining, mei in handwiel kabel lingte fan 10 meters.
2. De handwheel skerm kin werjaan systeem workpiece koördinaten, meganyske koördinaten,feed rate, Seleksje fan Axis, fergrutting, and other information.
3. Stypje knop EMERGENCY STOP, Skeakelje io-sinjaal útfier, and the hand wheel shutdown emergency stop is still valid.
4. Unterstitteren 6 Oanpaste knoppen, switch IO sinjalen, and can output signals to the system through IO wiring or communication.
5. Unterstitteren 6 of 8 Axis Control, with switch IO signals that can be output to the system through IO wiring or communication.
6. Unterstitteren 3 of 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulses / beurt, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Produkt spesifikaasjes
Handwheel working power supply voltage DC24V/1A
Untfanger Netzteil spanning DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10m
Receiver end cable length 1m
Receiver end network cable length 3m
Operating temperature -25℃<X<55℃
Anti-fall height 1m
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Produktfunksje ynlieding

Noat:
Emergency stop button:
Druk op de knop Emergency Stop, en de twa sets fan needstop IO útgongen op 'e ûntfanger wurdt loskeppele, and all functions of the handwheel will be invalid.
After releasing the emergency stop, De needstoppe io-útfier op 'e ûntfanger is sletten, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Oanpaste knoppen, elk oerienkomt mei in IO útfier punt op de ûntfanger, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Druk op en hâld de knop yn, skodzje de pols encoder, emit in puls sinjaal, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Produkt accessoiry-diagram

6. Gids foar ynstallaasje fan produkt
6.1 Stappen foar ynstallaasje fan produkt
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Ferwize nei ús ûntfanger draaddiagram en fergelykje it mei jo apparatuer foar on-site. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Nei it befestigjen fan 'e ûntfanger, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Untfange fan ynstallaasje Dimensions

6.3 Installation dimensions of aviation plugs

6.4 Untfang fan ûntfangende referinsjediagram
7.Produktryske ynstruksjes

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Selektearje fergrutting: Switch the magnification switch and select the magnification level you need.
7. Ferpleatse as: Druk op en hâld de knop yn, Selektearje de Seleksje Seleksje-switch, selektearje de fergrutting switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Druk op de knop Emergency Stop, de oerienkommende needstop IO útfier fan de ûntfanger wurdt loskeppele, de handwheel funksje wurdt útskeakele, loslitte de needstopknop, de needstop IO útfier sil wurde sletten, and the handwheel function will be restored.
8.Produktmodelbeskriuwing

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : Fertsjintwurdiget it oantal dat Seleksje-skakelheden fan AXS, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Ûnderhâld
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Asjebleaft foarkomme asjebleaft, Falling, bulten, etc. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. As net lang brûkt, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Feiligensynformaasje

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. As reparaasje nedich is, Nim dan kontakt op mei de fabrikant. As de skea wurdt feroarsake troch selsreparaasje, De fabrikant sil gjin garânsje leverje

 

]]> Dedicated Wireless Remote foar CNC Vertical Wettenhe operaasje-ynstruksjes https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Produkt Yntroduksje

De tawijde draadloze kontrôle op ôfstân foar CNC fertikale draaibanken wurdt brûkt foar hânlieding, posysje, ark ynstelling, en oare operaasjes op CNC fertikale masine ark. Dit produkt oannimt draadloze oerdracht technology, elimineren de needsaak foar tradisjonele spring wirae ferbinings, Ferminderjen fan apparatuerferliening feroarsake troch kabels, en elimineren de neidielen fan kabel slepen en oalje vlekken, it meitsjen fan operaasje handiger. It is breed fan tapassing op ferskate fertikale draaibanken lykas CNC fertikale draaibanken, single-kolom fertikale draaibanken, and double-column fertikale lathes.It kin ek oanpast wurde oan in ferskaat oan CNC systemen op 'e merk, lykas Siemens,
Mitsubishi, Fanuc, and Syntec.

2. Produkt funksjonele funksjes

1. Oannimme 433 MHz draadloze kommunikaasje technology, mei in draadloze operearjende ôfstân fan 40 meters.
2.Oannimme automatyske frekwinsje hopping funksje en gebrûk 32 sets fan draadloze remote controllers tagelyk, without affecting each other.
3. Stypje knop EMERGENCY STOP, switch IO signal output.
4. Unterstitteren 2 Oanpasbere knoppen, with switch-type IO signal output.
5. Unterstitteren -2 axis control.
6. Supports 3-level magnification control.
7. Stypje de ynskeakelje knopfunksje, dy't IO-sinjalen oan/út kinne útfiere en as seleksje kontrolearje, fermannichfâldigjen faktor, en kodearder.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Unterstützt puls encoder, mei in spesifikaasje fan 100 pulses per revolution.
3. Produkt spesifikaasjes
Bedriuwsspanning en stroom fan draadloze ôfstân
3V/14MA
Batterij spesifikaasjes 2 AA alkaline batterijen, size 5
Lege spanning alarmberik fan draadloze ôfstân < 2.3V
Untfanger Netzteil spanning DC5V-24V/A
Untfanger emergency stop útfier load berik AC125V-1A/DC30V-2A
Untfanger ynskeakelje útfier load berik
AC125V-1A/DC30V-2A
Untfanger oanpaste knop útfier load berik DC24V/50mA
Untfanger as seleksje útfier load berik DC24V/50mA
Untfanger fergrutting útfier load berik DC24V/50mA
Transmission macht fan handheld terminal
15dBm
Untfanger ûntfangt gefoelichheid -100dBm
Wireless kommunikaasje frekwinsje 433MHz frekwinsje band
Wireless kommunikaasje ôfstân Barriêre frije ôfstân fan 40 Meters
Operaasje temperatuer -25℃ < X < 55℃
Anti fallhichte 1 (meter)
Oanpaste knop kwantiteit 2
4. Produktfunksje ynlieding



Notysjes:

① Pulse encoder:
Druk op en hâld de knop yn, skodzje de pols encoder, emit in puls sinjaal,and control the movement ofthe machine axis.
② Knop ynskeakelje:
Druk op beide ynskeakelje knop oan beide kanten, en de twa sets fan ynskeakelje IO útgongen op de ûntfanger sil fiere. Los de ynskeakelje knop los om de ynskeakelje IO-útfier los te meitsjen; En foardat it wikseljen fan de as seleksje fergrutting en skodzje de handwheel,de ynskeakelje knop moat holden wurde om effektyf te wêzen; This function can be cancelled through configuration software.

③ Indicator ljochten:
Linkerkant ljocht: macht op ljocht,it hânwiel brûkt de as om OFF te selektearjen foar macht oan, en dit ljocht bliuwt op nei macht op;
Middelljocht: in sinjaalljocht dat opljochtet by it betsjinjen fan elke funksje fan it hânwiel, en net ljocht op as der gjin operaasje;
Rjochterkant ljocht: Low voltage alarm ljocht, leech batterij nivo,dit ljocht knippert of bliuwt oan, battery needs to be replaced.

④ Noodstopknop:
Druk op de knop Emergency Stop, en de twa sets fan needstop IO útgongen op 'e ûntfanger wurdt loskeppele, and all functions of the handwheel will be invalid.

⑤ Fergrutting switch:
Druk en hâld de ynskeakelje knop te wikseljen de fergrutting switch, which can switch the magnification controlled by the handwheel.

⑥ As seleksje switch (Power Switch):
Druk en hâld de ynskeakelje knop te wikseljen de as seleksje switch, dy't de bewegingsas kin wikselje kontroleare troch it handwiel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Oanpaste knop:
Twa oanpaste knoppen, each corresponding to an IO output point on the receiver.

5. Produkt accessoiry-diagram

6. Gids foar ynstallaasje fan produkt
6.1 Stappen foar ynstallaasje fan produkt

1. Ynstallearje de ûntfanger yn it elektryske kabinet fia de bik op 'e rêch, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Ferwize nei ús ûntfanger draaddiagram en fergelykje it mei jo apparatuer foar on-site. Connect the equipment to the receiver via cables.
3.Nei de ûntfanger is goed fêst, de antenne foarsjoen fan 'e ûntfanger moat ferbûn wêze, en it bûtenste ein fan 'e antenne moat wurde ynstallearre of pleatst bûten it elektryske kabinet. It wurdt oanrikkemandearre om it te pleatsen op 'e boppekant fan it elektryske kabinet foar it bêste sinjaaleffekt. It is ferbean om de antenne net ferbûn te litten of yn 'e elektryske kast te pleatsen, as this may result in the signal being unusable.
4. Úteinlik, oansette de macht switch fan it hânwiel, and you can operate the machine remotely using the handwheel.

6.2 Untfange fan ynstallaasje Dimensions

6.3 Untfang fan ûntfangende referinsjediagram

7. Produktryske ynstruksjes
1. Strom op 'e masine en de ûntfanger. It wurkjende yndikatorljocht fan de ûntfanger flitst. Ynstallearje de batterij yn it draadloze elektroanyske handwiel, feilich de batterij cover, en
ynskeakelje de macht switch fan de draadloze elektroanyske handwheel. The handwheel’s battery level indicator light is on.
2. Selektearje de koördinaatas: Druk op en hâld de knop yn, wikselje de as seleksje switch, and select the axis you want to operate.
3. Selektearje fergrutting: Druk op en hâld de knop yn, skeakelje de fergrutting switch,and select the desired magnification level.
4. Ferpleatse as: Druk op en hâld de knop yn, Selektearje de Seleksje Seleksje-switch, selektearje de fergrutting switch, en dan draaie de puls encoder. Draaie mei de klok yn te ferpleatsen de
positive axis and counterclockwise to move the negative axis.
5. Druk op en hâld alle oanpaste knop, en de oerienkommende knop IO útfier fan de ûntfanger wurdt ynskeakele. Los de knop los, and the output will be turned off.
6. Druk op de knop Emergency Stop, de oerienkommende needstop IO útfier fan de ûntfanger wurdt loskeppele, de handwheel funksje wurdt útskeakele,loslitte de needstopknop, de needstop IO útfier sil wurde sletten, and the handwheel function will be restored.
7. As de Handwheel is net foar in perioade opereare, it sil automatysk yn 'e sliepmodus gean om enerzjyferbrûk te ferminderjen. As it opnij wurdt brûkt, the handwheel can be activated by pressing the enable button.
8. As de hânwiel net lang brûkt wurdt, it is oan te rieden om de handwheel skacht te skeakeljen nei de OFF posysje, Skeakelje de hânwielskrêft út, and extend the battery life.

8. Produktmodelbeskriuwing

① :ZTWGP stiet foar it uterlik styl
②：Pulse útfierparameters:
01: Jout oan dat it pulsútfiersinjaal A is, B; Puls spanning 5v; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; Puls spanning 5v; pulse quantity 100PPR.
04：Tsjut op in NPN Open Circuit-útfier oan, mei puls útfier sinjalen fan A en B;The number of pulses is 100PPR.
05：Jout oan om High-nivo PNP Boarne-útfier oan, mei puls útfier sinjalen fan A en B; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 fertsjintwurdiget 2 axes.
④：Represents the type of axis selection switch signal, In fertsjintwurdiget it punt-oan-punt-útfier-sinjaal, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, In fertsjintwurdiget it punt-oan-punt-útfier-sinjaal, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 fertsjintwurdiget 2 custom buttons.
⑦：Represents the power supply for the system handwheel, en 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

10. Product maintenance

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Asjebleaft foarkomme asjebleaft, Falling, bulten, etc. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. As net lang brûkt, bewarje asjebleaft de hânwiel yn in skjin en feilich plak. Tidens opslach en ferfier, attention should be paid to moisture and shock resistance.

11. Feiligensynformaasje

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. As reparaasje nedich is, Nim dan kontakt op mei de fabrikant. As de skea wurdt feroarsake troch selsreparaasje, De fabrikant sil gjin garânsje leverje

]]> Fanuc Dedicated Wireless Electronic Handwheel https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 maaie 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Produkt Yntroduksje

Wireless Electronic Handwheel wurdt brûkt foar manuele begelieding, posysje, tool alignment,and other operations on CNC machine tools. Dit produkt oannimt draadloze oerdracht technology, Eliminearje de tradisjonele spring draadferbining, Ferminderjen fan apparatuerferliening feroarsake troch kabels, eliminating the disadvantages of cable dragging and oil stains, en it meitsjen fan operaasje handiger. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,fergrutting, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Produktfunksjes
1. Adoptearje 433mhz draadloze kommunikaasjechnology, draadloze operaasjeôfstân is 40 Meters;
2. ANDINSTEN ANDULD FREKENCY HOPPORD, gebrûk 32 sets of wireless remote controllers at the same time without affecting each other;
3. Stypje knop EMERGENCY STOP, Skeakelje io-sinjaal útfier, connected to the system through IO wiring;
4. Stypje 4 Oanpaste knoppen, Skeakelje io sinjaal, Utfier sinjaal nei it systeem fia Io-linkprotokol;
5. Stypje snelle bewegingsknop + en knop -, Druk op en hâld de knop om de hânwiel te ferfangen om de masine te ferpleatsen;
6. Stypje 6-Axis Control, Skeakelje io sinjaal, Utfier sinjaal nei it systeem fia Io-linkprotokol;
7. Support 1X,10X, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Notysjes:
①Emergency Stopje knop:
Druk op de knop Emergency Stop, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Oanpaste knoppen, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Druk op en hâld de knop yn en hâld op en skodzje de puls-kodearder om in puls út te stjoeren
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Produkt Accessories Diagram

6.Gids foar ynstallaasje fan produkt

6.1 Stappen foar ynstallaasje fan produkt

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Ferwize nei ús ûntfanger draaddiagram, fergelykje it mei jo apparatuer op it plak, en ferbine
the equipment to the receiver via cables.
3. Neidat de ûntfanger is fêst, de antenne foarsjoen fan 'e ûntfanger moat ferbûn wêze,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
It wurdt oanrikkemandearre om it te pleatsen op 'e boppekant fan it elektryske kabinet foar it bêste sinjaaleffekt. It
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Úteinlik, Skeakelje de hânwiel Power-skeakel yn en jo kinne de masine betsjinje troch
handwheel remote control.

6.2 Untfange fan ynstallaasje Dimensions

6.3 Untfang fan ûntfangende referinsjediagram

7. Underhâld en soarch

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
it tsjinstferliening;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Asjebleaft foarkomme asjebleaft, Falling, bulten, etc. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. As net lang brûkt, bewarje asjebleaft de hânwiel yn in skjin en feilich plak;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Lês asjebleaft de ynstruksjes soarchfâldich foar gebrûk. Net-professionals binne ferbean
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. As reparaasje nedich is, Nim dan kontakt op mei de fabrikant. As de skea wurdt feroarsake troch selsreparaasje,
the manufacturer will not provide warranty.

]]> Siemens Dedicated Wireless Electronic Handwheel XWGP-ETS https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 maaie 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Yntroduksje fan remote control

a.Product Composion
Siemens real-time koördinaat werjefte draadloze elektroanyske hânwiel bestiet út twa dielen: elektroanyske handwheel + ûntfanger;

b. Skaaimerken

*Stypje Siemens Plc: S7-200 / -300 / -1200；Stipe real-time werjefte fan Siemens System CORED-wearden；
*De ôfstân fan 'e draadloze transmissie is iepen 40 Meters, automatyske frekwinsje hopping technology, brûke kinne 32 sets fan apparatuer tagelyk;
*De elektroanyske handwheel wurdt oandreaun troch 2 AA batterijen en kin brûkt wurde foar mear as 30 dagen;
*De ûntfanger is foarsjoen fan in eksterne antenne om it sinjaal te ferbetterjen en is maklik te ynstallearjen;
*Elektroanyske handwheel stipe: ien 100PPR-kodearder 、Ien 6-Speed ​​Axis Seleksje-switch 、 ien op 3-snelheid fergrutsje;
*Elektroanyske handwheel stipet 6 Oanpaste knoppen, oerienkommende mei Siemens PLC adres, dat kin frij programmeare wêze;

*6 Oanpaste knoppen kinne kontrolearje 6 Oerskeakelje útgongsputten;
*It display skerm toant de PLC-oerienkommende registerkoördinaatwearde yn echte tiid, and supports 6-axis display of real-time coordinates.

2.Applikaasje fjild

Programmierbere CNC remote control wurdt in soad brûkt yn ferskate CNC fjilden lykas laser gravure systeem, CNC Milling Machine, CNC Machining Center, gantry masine ark, Encce.

3. Ynlieding ta it wurkprinsipe

1） Elektroanysk handwiel is ferbûn mei PLC fia Ethernet-ûntfanger

a.It hânwiel stjoert de kaaigegevens draadloos nei de ûntfanger, en de ûntfanger skriuwt de kaaien troch it netwurk kabel PLC systeem DB gebiet; de ûntfanger lêst de te werjaan gegevens út it oanwiisde DB-gebiet, en dan jout de gegevens oan it handwheel display skerm. De brûker kin it basisadres fan it lêzen en skriuwen fan DB-gebiet op it handwiel oanpasse, so that the handwheel can read and write the data in the DB area of the PLC.

b. De ûntfanger stipet Siemens S7 protokol. Jildt foar PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Yn de tsjinner modus, de brûker konfigurearret it PLC-lês- en skriuwadres fia de WGP-ETS-konfiguraasjesoftware;Brûk it PLC-ferbiningskonfiguraasjeark om de ûntfanger yn clientmodus te konfigurearjen. Nei konfiguraasje, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Spesifike applikaasje

Spesifike tapassing fan handwheel ûntfanger en Siemens PLC S7-200:

in. De knop op it hânwiel komt oerien mei de wearde fan it BOOL-gebiet ynsteld troch de brûker yn 'e PLC. As de knop fan it hânwiel yndrukt wurdt, de oerienkommende BOOL gebiet is wier, en as it wurdt útbrocht, it is falsk, en it basisadres fan it BOOL-gebiet kin ynsteld wurde fia it handwiel;

b. It handwiel kin de wearde fan it DB-gebiet yn 'e PLC lêze. Ien as hat 4 bytes fan werjaan gegevens, en 6 assen hawwe in totaal fan 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Uterlik ynlieding

5.Untfanger terminal definysje en kodearring tafel

6.Uterlik grutte

 

 

]]>