Beskriuwing
1.Produkt Yntroduksje
Wireless Remote Control is used for manual guidance, posysje, tool setting and other operations of CNC machine tools. Dit produkt oannimt draadloze oerdracht technology, Eliminearje de tradisjonele spring draadferbining, Ferminderjen fan apparatuerferliening feroarsake troch kabels, Elimineeren fan 'e neidielen fan kabel-draken, Oillikehâlders, Encce., and is more convenient to operate.It is widely applicable to CNC machine tools such as gantry machining centers, gantry vertical lathes, and CNC gear processing machines, and is compatible with various mainstream CNC system brands on the market, including Siemens, Mitsubishi, Fanuc, Syntec and more.
2.Produktfunksjes
1. Adopt 433MHz draadloze kommunikaasje technology mei in draadloze bestjoeringssysteem ôfstân fan 20 Meters.
2.Adaptive frekwinsje hopping; 32 sets fan draadloze ôfstânkontrôles kinne tagelyk brûkt wurde sûnder ynterferinsje.
3.Supports the emergency stop button, and the emergency stop button remains effective even after the remote control is powered off.
4.Unterstitteren 3 oanpaste knoppen mei switching IO sinjaal útfier.
5.Unterstützt 6-assige kontrôle, en 7 oan 12-axis kontrôle is oanpasber.
6. Unterstützt 3-snelheid fergruttingskontrôle, en 4-snelheid fergrutting kontrôle is oanpasber.
7.stipet de ynskeakelje knop funksje, dat kin útfier switching IO sinjalen, en ek kontrôle as seleksje, fergrutting en encoder.
8.Unterstützt it wizigjen fan it kodearringstype fan as seleksje en fergrutting fia software.
9. Supports pulse encoder with specification of 100 pulses per revolúsje.
10. Supports standard Type-C charging with 5V-2A charging specification; built-in battery
specification: 14500 / 1100mah.
3. Produkt Spesifikaasjes
| Working Voltage and Current of Handheld Terminal |
3.7V/20.0mA |
| Charging Battery Specification |
3.7V/14500/1100mAh
|
| Low Voltage Alarm Range of Handheld Terminal |
<3.35V |
| Receiver Power Supply Voltage |
DC5V-24V/1A |
| Receiver Emergency Stop Output Load Range |
AC125V-1A/DC30V-2A |
| Receiver Enable Output Load Range |
AC125V-1A/DC30V-2A |
| Receiver Custom Button Output Load Range |
DC24V/50mA
|
| Receiver Axis Selection Output Load Range |
DC24V/50mA |
| Receiver magnification Output Load Range |
DC24V/50mA |
| Handheld Terminal Transmit Power |
15dBm
|
| Untfanger ûntfangt gefoelichheid |
-100dBm |
| Wireless kommunikaasje frekwinsje |
433MHz frekwinsje band
|
| Wireless Communication Distance |
20 meters barrier-free distance
|
| Operating Temperature |
-25℃<X<55℃ |
| Safe drop height |
1 m
|
| Number of Custom Buttons |
3
|
| Product Weight |
546.86（g） |
| Product Dimensions |
200*87*72（mm） |
4. Produktfunksje ynlieding
Notysjes:
① Emergency Stop Button:
Druk op de knop Emergency Stop, the two groups of emergency stop IO outputs on the receiver will disconnect, and all remote control functions will be invalidated.Release the emergency stop button, the emergency stop IO outputs on the receiver will be closed, and all remote control functions will be restored. Derneist, even if the remote control is powered off, pressing the emergency stop button can still activate the emergency stop IO output of the receiver.
② Enable Button:
Press either enable button on both sides, the two sets of enable IO outputs on the receiver will conduct. Release the enable button, and the enable IO outputs will disconnect. It is necessary to press and hold the enable button before toggling axis selection, magnification or rotating the remote control for the operation to take effect.This function can be canceled through the configuration software.
③ Axis Selection Switch (Power Switch):
Druk op en hâld de knop yn, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.
④ Pulse Encoder:
Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.
⑤ LCD Display Screen:
5. Product Accessories Diagram
6. Gids foar ynstallaasje fan produkt
6.1 Stappen foar ynstallaasje fan produkt
1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.
2. Ferwize nei ús ûntfanger draaddiagram, fergelykje it mei jo apparatuer op it plak, and connect the equipment to the receiver with cables.
3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; oars, signal failure may occur.
4. Úteinlik, turn on the remote control power switch, then you can remotely operate the machine via the remote control.
6.2 Receiver Installation Dimensions
6.3 Untfang fan ûntfangende referinsjediagram
7. Produktryske ynstruksjes
1. Strom op 'e masine en de ûntfanger. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.
2. Select the axis : Druk op en hâld de knop yn, toggle the axis selection switch to select the axis to be operated.
3. Select the magnification: Druk op en hâld de knop yn, toggle the magnification switch to select the required magnification gear.
4. Axis movement: Druk op en hâld de knop yn, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.
5. Druk op en hâld alle oanpaste knop, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.
6. Druk op de knop Emergency Stop, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.
7. If the wireless remote control is not operated for a period of time, it sil automatysk yn 'e sliepmodus gean om enerzjyferbrûk te ferminderjen. It can be used normally again by pressing the enable button again.
8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life
8. Produktmodelbeskriuwing
①：UWGP stands for appearance style.
②：Pulse Output Parameters：
01: Jout oan dat it pulsútfiersinjaal A is, B; Puls spanning 5v; puls kwantiteit 100PPR.
02: Jout oan dat it pulsútfiersinjaal A is, B; Pulse voltage 12V; pulse quantity 25PPR.
03: Jout oan dat it pulsútfiersinjaal A is, B, IN -, B -; Puls spanning 5v; puls kwantiteit 100PPR.
04: Tsjut op in NPN Open Circuit-útfier oan, mei puls útfier sinjalen fan A en B; The number of pulses is 100PPR.
05: Jout oan om High-nivo PNP Boarne-útfier oan, mei puls útfier sinjalen fan A en B; It oantal pulses is 100PPR.
③：Represents the axis selection switch quantity; 6 stands for 6 assen, 7 stands for 7 assen, and so on.
④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.
⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.
⑥: Fertsjintwurdet it oantal oanpaste knoppen; 3 corresponds to 6 Oanpaste knoppen.
⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, en 24 stands for 24V power supply.
⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.
9. Produkt Troubleshooting
10. Maintenance and upkeep
1. Brûk it asjebleaft yn in droege omjouwing by keamertemperatuer en druk om syn tsjinstferliening te ferlingjen.
2. Please avoid using in abnormal environments such as rain and water to extend the service life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, etc. to prevent damage to the precision components inside the remote control or accuracy errors.
5. As net lang brûkt, please store the remote control in a clean and safe place.
6. Avoid moisture and shock during storage and transportation.
11. Feiligensynformaasje
1. Lês asjebleaft de ynstruksjes soarchfâldich foardat jo brûke en ferbiede net profesjoen fan operearjen.
2. Please charge the remote control in a timely manner when the battery level is too low, to avoid malfunction and operational errors caused by insufficient power.
3. If you repair it yourself and cause damage, the warranty will be void.
