The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Gnéithe feidhme táirge

1. Adopting 433MHz wireless communication technology, with a wireless operating distance of 100 meters.
2. Feidhm agus úsáid minicíochta uathoibríoch a ghlacadh 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhongchen, INVT, is . For brands
that are not compatible, please contact us for customization.
4. Rialachán luais tacaíochta, tosú, and current reading of large motor frequency converters.
5. Tacaíocht a thabhairt do rialachán luais tiontaire minicíochta ar chlé agus ar dheis, tosú, cuir i láthair, tacaigh le, left and right control.
6. Support linear correction of left and right track frequency converters to keep the machine walking in a
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Sonraíochtaí Táirgí

4. Product Function Introduction

Nótaí:
①Screen display:

②Mode switch:

③Enable:
Combination buttons, some operations require holding down the enable button for operation,see the instructions for each switch for details.
④Large motor switch:
Using a 3-speed reset switch, pulling this switch can control the forward and reverse rotation of the large motor. Tar éis é a scaoileadh, the state will remain, and there will be corresponding displays on the screen. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤Small motor forward/reverse switch:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Using a multi turn encoder knob, press the enable button, turn the knob right, and display the straight line correction: Df: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 unit; Turn left knob, straight line correction display: Df: On the right, every turn of the knob increases by 1 unit, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Using a 3-speed reset switch, when manually operated, the small motor can be controlled to turn left or right. Once released, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ Large motor speed regulation:
Using a multi turn encoder knob, rotating 1 grid each time, the speed value of the large motor changes by approximately 0.2 units. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Using a multi turn encoder knob, in manual mode, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 units, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 units. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. Léaráid táirge cúlpháirtí

6. Treoir Suiteála Táirgí
6.1 Céimeanna suiteála táirgí
1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Déan tagairt dár léaráid sreangú glacadóra agus cuir i gcomparáid é le do threalamh ar an láthair. Connect the equipment to the receiver through wires.
3. Tar éis an glacadóir a shocrú, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. Moltar é a chur ar bharr na comh -aireachta leictreachais don éifeacht comhartha is fearr. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Mar fhocal scoir, install the battery on the remote control, tighten the battery cover, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Toisí suiteála glacadóra

6.3 Léaráid tagartha sreangaithe glacadóra

7. Product operation instructions
7.1 Remote Control Parameter Settings
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, adjust the speed of the small motor to 25 on both sides, nó 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 times;
Use the “Small Motor Speed Control” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, turn the page to the end,ar leith “Save” to exit, and press the enable button to exit the menu;
The parameters are as follows:
Uasmhéid reatha: feedback range of large motor current, set range 15-200A, mainneachtain 100;
Paraiméadair rialaithe luais: Mód uathoibríoch, small motor automatically accelerates faster or slower,the smaller the faster, set range 200-1500, mainneachtain 800;
Paraiméadar luasmhoillithe: Set the upper limit that allows the motor speed to change. When the current changes beyond this value, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, with a range of 05-12 and a default of 06;
Luasghéarú A1: The larger the motor speed, the faster it increases, with a range of 00-06 and a default of 01;
Luasmhoilliú A2: The larger the motor speed, the faster it decreases, with a range of 00-06 and a default of 02;
Enable speed regulation: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Tosaigh féin-ghlasáil: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Uas -Siúlóid: maximum speed of left and right motors, range 10-100, mainneachtain 50;
Reatha a ghearradh: maximum cutting current, displayed on the screen as IC value, range 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Teorainn luais réamhshocraithe: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Mód uathoibríoch: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 go dtí 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Óstach uasta: maximum speed of the large motor, range 10-100, mainneachtain 50;
Mbus equipment (mandatory): Selection of large motor frequency converter model, range 00-03, mainneachtain 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）
SBUS equipment (mandatory): Small motor frequency converter model selection, range 00-05, mainneachtain 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）

04-Anchuanda 05-None

7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, is
the large motor frequency converter to 3
7.3 Remote Control Operation Instructions
1. Power on the machine, cas ar an gcianrialtán, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (skip this step if the machine manufacturer has already set it);
2. Set the parameters of the frequency converter (skip this step if the machine manufacturer
has already set it);
3. Set the remote control to manual mode, and then use the remote control to move the machine to
the working position;
4. I mód láimhe, set the cutting current of the large motor to IC and the speed of the large motor
5. Switch to automatic mode and set the cutting speed limit F value for the small motor;
6. I mód uathoibríoch, turn the large motor switch to forward to start the large motor, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Product troubleshooting

9.Cothabháil
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Mura n -úsáidtear é ar feadh i bhfad, please remove the battery and store the remote control and battery in a clean
and safe place.
6.Le linn stórála agus iompair, attention should be paid to moisture and shock resistance.

10. Faisnéis sábháilteachta
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. Má tá deisiú ag teastáil, Téigh i dteagmháil leis an monaróir le do thoil. Más é is cúis leis an damáiste féin deisiú, the manufacturer
will not provide warranty.

Múnla: DH01R-4W-26K

Trealamh is infheidhme:various industrial equipment

2.Léaráid gabhálais táirgí

Nóta: Is féidir leat ceann de na trí antennas a roghnú. The suction cup antenna is standard by default.

3.Product model description

Nóta:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 go dtí 2, indicating that there are 1 go dtí 2 Ionchuir aschur(maximum 2 bealaí); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, srl.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Bheith

1）Maximum 26 Aschuir sealaíochta;
2）Maximum 4 Bealaí aschur aschur 0-10V (Is féidir raon taispeána a oiriúnú): tacaíochtaí tacaíochta 2 Bealaí aschur poitéinsiméadar digiteach iargúlta sínte;
3）2 analog inputs; agus ar taispeáint ar an gcianrialtán, Is féidir an raon taispeána a oiriúnú
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Cadhnraí AA, low power consumption design;
6） Wireless operation distance is 200 méadar;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.Cur síos ar lasc cianrialaithe

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

Ísealvoltais: Tá an ceallraí cianrialaithe ró -íseal, please replace the battery.

Thit an líonra: Cuirtear isteach ar an gcomhartha gan sreang. Seiceáil le do thoil cumhacht an ghlacadóra, Cumhacht air arís, and restart the remote control.

7.Treoracha Oibríochta Feidhm Rialaithe Cianda

1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, Cas air an lasc cumhachta, and the display shows a value,ag léiriú tosaithe rathúil. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
Nuair a bhrúitear an cnaipe stad éigeandála, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Is féidir roinnt feidhmeanna den chianrialtán a choigeartú trí pharaiméadair. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Scoir an roghchlár paraiméadair: Roghnaigh sábháil nó gan sábháil nó gan iad a shábháil, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 go dtí 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 go dtí 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 go dtí 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;

8.Saintréithe leictreacha cianrialtáin

9.Méid cianrialaithe

The final interpretation right of this product belongs only to our company.

Múnla: DH12S-P6S

Trealamh is infheidhme:wire saw/blade saw machine

2.Léaráid gabhálais táirgí

Nóta: Is féidir leat ceann de na trí antennas a roghnú. The suction cup antenna is standard by default.

3.Cur síos ar lasc cianrialaithe

4.Réamhrá DisplayContent

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(Paraiméadair inchoigeartaithe)
Automatic cutting main motor setting current: Setting: 28 (Paraiméadair inchoigeartaithe)
Swing arm motor speed: Swing: 0-50

Ísealvoltais: Tá an ceallraí cianrialaithe ró -íseal, please replace the battery.

Thit an líonra: Cuirtear isteach ar an gcomhartha gan sreang. Seiceáil le do thoil cumhacht an ghlacadóra, Cumhacht air arís, and restart the remote control.

5.Treoracha Oibríochta Feidhm Rialaithe Cianda

1）Turn on the remote control

When the receiver is powered on, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; install two AA batteries in the remote control, Cas air an lasc cumhachta, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, Cas an “Ar aghaidh/droim ar ais” Athraigh ar aghaidh, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, Cas an “Ar aghaidh/droim ar ais” Athraigh go droim ar ais, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rothlaigh an “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, Cas an “Ar aghaidh/droim ar ais” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Cas an “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Brúigh agus coinnigh an “speed adjustment enable” cnaipe agus rothlaigh an “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “ar aghaidh/droim ar ais” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (Tá cosc ​​ar úsáideoirí é a mhodhnú gan cead)

Enter the parameter menu:I mód láimhe, when the main motor speed is 0, Brúigh an t -athrú ar aghaidh/droim ar ais trí huaire i ndiaidh a chéile, and then push it down three times in a row to enterthe parameter menu;
Scoir an roghchlár paraiméadair: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, mainneachtain 800, unit milli second,Tá cosc ​​ar mhodhnú;
Paraiméadar luasmhoillithe: Nuair a sháraíonn an luach athraithe reatha gearrtha an luach seo, rapid deceleration begins, unit Ampere;
Luasghéarú A1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Luasmhoilliú A2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, Tá cosc ​​ar mhodhnú;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, Tá cosc ​​ar mhodhnú;
Uasmhéid reatha: The range of main motor feedback current, unit Ampere;
Óstach uasta: Remote control main motor speed adjustment display range;
Uas -Siúlóid: Invalid parameter;
Teorainn luais a fhritháireamh: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Gearradh uathoibríoch, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;unit: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Saintréithe leictreacha cianrialtáin

7.Méid cianrialaithe

The final interpretation right of this product belongs only to our company.

Múnla: Dh12s-LD

Trealamh is infheidhme:Meaisín Saw Wire Crawler

Léaráid gabhálais táirgí

Nóta: Is féidir leat ceann de na trí antennas a roghnú. The suction cup antenna is standard by default.

Cur síos ar lasc cianrialaithe

Réamhrá DisplayContent

Luas mór mótair：S1：0-50
Luas beag mótair: S2: 0-50
CuttingsmallMotor MaxposPeedlimitofautomatic:F:0-30(parametersad -inúsáidte)
Uasmhéid uathoibríoch a ghearradh uathoibríoch: Mcas: 0-35 (Paraiméadair inchoigeartaithe)
Luach ceartúcháin líneach: Df: -99-99 (1 Tá an t -aonad thart ar 0.02V)

Ísealvoltais: Tá an ceallraí cianrialaithe ró -íseal, please replace the battery.

Thit an líonra: Cuirtear isteach ar an gcomhartha gan sreang. Seiceáil le do thoil cumhacht an ghlacadóra, Cumhacht air arís, and restart the remote control.

Treoracha Oibríochta Feidhm Rialaithe Cianda

1.Cas air an cianrialtán

Nuair a bhíonn an chumhacht air, Tosaíonn an solas faoi stiúir RF ar an nglacadóir ag splancadh;Suiteáil dhá chadhnra AA i rialú cianrialtáin an treceiver e, Cas air an lasc cumhachta, Taispeánfaidh an taispeántas an luas mótair, indicating successful startup.

2.Rialachán mór mótair agus luais

Cas an “ar aghaidh/droim ar ais” Athraigh ar aghaidh, casfaidh mótar mór an ghlacadóra air, Agus taispeánfar an taispeántas ar aghaidh

Cas an “ar aghaidh/droim ar ais” Athraigh go droim ar ais, casfaidh mótar mór an ghlacadóra ar chúl, agus taispeánfaidh an taispeántas droim ar ais

Rothlaigh an “Coigeartú mór luas mótair” knob chun voltas aschuir aschuir mótair mór an ghlacadóra a choigeartú 0-10V;

3.Rialachán beag mótair agus luais

Bog an “ar aghaidh/droim ar ais” Athraigh ar aghaidh, Déantar an roth clé ar aghaidh agus an roth ceart ar aghaidh ón nglacadóir a chasadh air, Agus taispeánann an taispeántas ar aghaidh

Cas an “Ar aghaidh/droim ar ais” Athraigh go droim ar ais, Déantar droim ar ais an roth chlé agus droim ar ais an ghlacadóra ar an roth ceart, agus taispeánann an taispeántas droim ar ais

4.Cas ar chlé agus ar dheis

Cas an “Ar chlé/ar dheis” Athraigh ar chlé, Cuirfidh roth ceart an ghlacadóra ar aghaidh agus casfaidh sé air,Agus taispeánfaidh an taispeántas ar chlé

Cas an “Cas ar chlé/ar dheis” Athraigh le casadh ar dheis, Cuirfidh roth clé an ghlacadóra ar aghaidh agus casfaidh sé air, Agus taispeánfaidh an taispeántas cas ar dheis

5.Cas ina áit

I mód láimhe:
Cas ar chlé ina áit: Brúigh agus coinnigh an “Cuónta” cnat, Cas an “Cas ar chlé/ar dheis” Athraigh ar chlé, Déantar an roth clé ar gcúl agus an roth ceart ar aghaidh ón nglacadóir a chasadh air,agus tosú ag casadh ar chlé i bhfeidhm;

Cas ar dheis i bhfeidhm: Brúigh agus coinnigh an “Cuónta” cnat, Cas an “Cas ar chlé/ar dheis” Athraigh ar dheis, Déantar an roth clé ar aghaidh agus droim ar ais an ghlacadóra a chasadh air, agus tosaíonn an glacadóir ag dul i gceart;

6.Coigeartú ar theorainn luais mhótair bheaga

I mód uathoibríoch: Brúigh agus coinnigh an “Cuónta” cnaipe agus rothlaigh an “Coigeartú ar luas beag mótair” Luas uasta an mhótair bheag a choigeartú le linn gearradh uathoibríoch;

7.Gearradh uathoibríoch

Is é an chéad chéim an mótar mór a thosú; Is é an dara céim an lasc mód a athrú go “Uathromainn”; Is é an tríú céim an mótar beag a thosú agus taispeánfar an scáileán “Auto a ghearradh”,ag léiriú go bhfuil sé tar éis dul isteach sa mhodh gearrtha uathoibríoch;

8. Ceartú líne dhíreach

Nuair a bhíonn na mótair siúil ar chlé agus ar dheis ag bogadh ar aghaidh agus siar, Tá na luasanna ar chlé agus ar dheis neamhréireach, agus an claonadh siúil líne dhíreach. Is féidir leat feidhm cheartú líneach an chianrialtáin a úsáid chun luas na rothaí clé agus ar dheis a mhionchoigeartú;
Prionsabal ceartúcháin: Tríd an bhfeidhm ceartúcháin, Déantar luas an roth chlé a mhionchoigeartú chun an luas céanna a bhaint amach leis an roth ceart, chun luas na rothaí clé agus ar dheis a shioncrónú agus deireadh a chur leis an diall;
Modh oibríochta ceartúcháin diall: I mód láimhe, Brúigh agus coinnigh an “Cuónta” cnaipe agus rothlaigh an “Rialachán beag ar luas mótair”;
Rothlaigh deiseal chun an voltas luais roth clé a mhéadú agus méadóidh an luach ceartúcháin ar an scáileán taispeána;
Rothlaigh tuathalach chun an voltas luais roth clé a laghdú agus an luach ceartúcháin taispeána go laghdú;
Raon: Luach ceartúcháin -90 go dtí 90; Is é voltas ceartúcháin aonad ceartúcháin amháin ná 0.02V;

9. Roghchlár paraiméadair (Tá cosc ​​ar úsáideoirí é a mhodhnú gan cead)

Is féidir roinnt feidhmeanna den chianrialtán a choigeartú trí pharaiméadair. I mód láimhe, Nuair a bhíonn an luas beag mótair s2 10, Brúigh an t -athrú ar aghaidh/droim ar ais trí huaire i ndiaidh a chéile, agus ansin é a bhrú síos trí huaire i ndiaidh a chéile chun an roghchlár paraiméadair a iontráil;
Scoir an roghchlár paraiméadair: Roghnaigh sábháil nó gan sábháil nó gan iad a shábháil, ansin brúigh an cnaipe Cumasaigh chun an bealach amach a dheimhniú;
Uasmhéid reatha: Is é sruth rátáil oibriúcháin an mhótair gearrtha 80% den sruth seo;
Paraiméadair rialaithe luais: Paraiméadair rialaithe gearrtha uathoibríocha, mainneachtain 800, Tá cosc ​​ar mhodhnú;
Paraiméadar luasmhoillithe: Paraiméadar rialaithe gearrtha uathoibríoch. Nuair a sháraíonn an luach athraithe reatha gearrtha an luach seo,deceleration begins.
Luasghéarú A1: Paraiméadar rialaithe gearrtha uathoibríoch, Nuair a bhíonn an sruth gearrtha níos ísle ná an sruth gearrtha socraithe, luas an luasghéaraithe;
Luasmhoilliú A2: Paraiméadar rialaithe gearrtha uathoibríoch, Nuair a bhíonn an sruth gearrtha níos airde ná an tacar
Reatha a ghearradh, luas an luasmhoillithe;
Aistarraingt scian uathoibríoch: neamhbhailí;
Tosaigh féin-ghlasáil: 0, Gan aon ghlasáil; 1, féin-ghlasáil. Brúigh an eochair Cumasaigh + forward and reverse to take effect and self-lock.
Uas -Siúlóid: the maximum speed of the small motor.
Reatha a ghearradh: Socraigh an sruth uasta den phríomh -mhótar le haghaidh gearradh uathoibríoch. Má sháraíonn an sruth aiseolais an luach seo, it will start to decelerate.
Teorainn luais réamhshocraithe: the default maximum speed of automatic cutting speed when turning on the machine.
Mód uathoibríoch: 0, Déantar an lasc uathoibríoch a rialú go huathoibríoch; 1, the automatic switch controls the automatic IO output point.
Teorainn luais a fhritháireamh: the maximum speed of the small motor during automatic cutting.
Óstach uasta: maximum speed of large motor.

Saintréithe leictreacha cianrialtáin

Méid cianrialaithe

The final interpretation right of this product belongs only to our company.

Múnla：ATWGP-12

Córas oiriúnaithe: Gach córas CNC le comhéadan roth láimhe

Is gineadóir cuisle láimhe é an táirge seo a úsáidtear le huirlisí meaisín CNC. Úsáidtear é go héadrom i réimsí ar nós uirlisí meaisín CNC, Deileanna cnc, ionaid mheaisínithe,Meaisíní greanadh agus muilleoireachta CNC. Úsáideann an táirge seo tarchurthacht gan sreang ar theicneolaíocht, deireadh a chur leis an ngá atá le naisc thraidisiúnta sreinge earraigh, teipeanna laghdaithe de bharr cáblaí, Deireadh a chur le tarraingt cábla, ola agus éilliú eile, agus oibríocht a dhéanamh níos áisiúla. Cuimsíonn an pacáiste táirge an glacadóir agus an roth láimhe leictreonach gan sreang. Tá an glacadóir ceangailte le trealamh CNC trí chábla líonra, agus an roth láimhe leictreonach (gineadóir cuisle láimhe) tá sé ceangailte agus cumarsáid leis an nglacadóir trí theicneolaíocht tarchuir gan sreang. Coinníonn an t -oibreoir an roth láimhe agus is féidir leis fáil réidh le srianta nasc na sreinge earraigh agus bogadh faoi shaoirse. Le haghaidh muilleoireacht droichead ar mhórscála, Deileanna cnc, Uirlisí meaisín taistil, gearrtha agus iarratais eile, it brings great convenience and improves work efficiency.

Tacaíonn sé le brandaí córais éagsúla ar nós Siemens, Mitsubishi, Fanuc, Taiwanxindai, Baoyuan, Iompóráil, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Ag baint úsáide as an mbanna minicíochta cumarsáide gan sreang 433MHz, Is é an fad oibriúcháin gan sreang 40 méadar;
2. Feidhm agus úsáid minicíochta uathoibríoch a ghlacadh 32 tacair de rothaí láimhe gan sreang ag an am céanna gan cur isteach ar a chéile;
3. Tacaíonn sé le cnaipe stad éigeandála agus 3 Aschuir lasc cnaipe saincheaptha;
4. Tacaíonn sé le ilroghanna ais 6-ais, 7-ais, 8-ais, 9-ais, 10-ais agus 12-ais, le formhéadú 3-luas agus 4-luas., pointe go pointe, cód liath, srl.;
5. Tacaíonn sé le comhartha cuisle difreálach 5V, 24V comhartha cuisle agus cineálacha comhartha cuisle eile;
6. Dearadh Tomhaltas Cumhachta Íseal, 2 Is féidir cadhnraí AA a úsáid ar feadh níos mó ná 1 mí;
7. Tacaíonn sé leis antenna síneadh seachtrach, Oiriúnach do thimpeallachtaí suiteála uirlisí meaisín éagsúla, cobhsaíocht comhartha a chinntiú;

Nóta:
1. Solas táscaire stádais:
Solas comhartha (ciotóg): Bíonn an solas comhartha i gcónaí nuair a fheidhmítear an roth láimhe, agus ní lasann sé suas nuair nach bhfuil sé ag feidhmiú;
Solas aláraim ísealvoltais (Ar an gceart): Nuair a bhíonn an chumhacht ceallraí ró -íseal,Flashes nó fanann an solas aláraim air;
2. Cnaipe Cumasaigh:
Tar éis an cnaipe Cumasaigh a bhrú agus a choinneáil, Cuirtear na comharthaí roghnúcháin ais agus formhéadúcháin i ngníomh, agus tá an t -aschur ionchódóra cuisle bailí;
3. Cnaipe saincheaptha:
Is féidir le cnaipe gan aon fheidhm aschur lasc comhfhreagrach a rialú ar an nglacadóir;

Com1: Críochfort Coiteann le haghaidh Aschur Comharthaí Formhéadúcháin Roghnú Ais; is féidir é a nascadh le comhartha poiblí 0-24V
Com2: Comhréirfort comhréireach de 3 Aschuir chnaipe saincheaptha;

*Is féidir roghnú agus formhéadú ais a roghnú trí bhogearraí, códú nó pointe go pointe, Téigh i gcomhairle leis an bhfoireann le haghaidh sonraí le do thoil

The final interpretation right of this product belongs to our company.

Córas oiriúnaithe: Gach córas CNC le comhéadan roth láimhe

Is gineadóir cuisle láimhe é an táirge seo a úsáidtear le huirlisí meaisín CNC. Úsáidtear é go héadrom i réimsí ar nós uirlisí meaisín CNC, Deileanna cnc, ionaid mheaisínithe,Meaisíní greanadh agus muilleoireachta CNC. Úsáideann an táirge seo tarchurthacht gan sreang ar theicneolaíocht, deireadh a chur leis an ngá atá le naisc thraidisiúnta sreinge earraigh, teipeanna laghdaithe de bharr cáblaí, Deireadh a chur le tarraingt cábla, ola agus éilliú eile, agus oibríocht a dhéanamh níos áisiúla. Cuimsíonn an pacáiste táirge an glacadóir agus an roth láimhe leictreonach gan sreang. Tá an glacadóir ceangailte le trealamh CNC trí chábla líonra, agus an roth láimhe leictreonach (gineadóir cuisle láimhe) tá sé ceangailte agus cumarsáid leis an nglacadóir trí theicneolaíocht tarchuir gan sreang. Coinníonn an t -oibreoir an roth láimhe agus is féidir leis fáil réidh le srianta nasc na sreinge earraigh agus bogadh faoi shaoirse. Le haghaidh muilleoireacht droichead ar mhórscála, Deileanna cnc, Uirlisí meaisín taistil, gearrtha agus iarratais eile, it brings great convenience and improves work efficiency.

Tacaíonn sé le brandaí córais éagsúla ar nós Siemens, Mitsubishi, Fanuc, Taiwanxindai, Baoyuan, Iompóráil, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Ag baint úsáide as an mbanna minicíochta cumarsáide gan sreang 433MHz, Is é an fad oibriúcháin gan sreang 40 méadar;
2. Feidhm agus úsáid minicíochta uathoibríoch a ghlacadh 32 tacair de rothaí láimhe gan sreang ag an am céanna gan cur isteach ar a chéile;
3. Tacaíonn sé le cnaipe stad éigeandála agus 3 Aschuir lasc cnaipe saincheaptha;
4. Tacaíonn sé le ilroghanna ais 6-ais, 7-ais, 8-ais, 9-ais, 10-ais agus 12-ais, le formhéadú 3-luas agus 4-luas., pointe go pointe, cód liath, srl.;
5. Tacaíonn sé le comhartha cuisle difreálach 5V, 24V comhartha cuisle agus cineálacha comhartha cuisle eile;
6. Dearadh Tomhaltas Cumhachta Íseal, 2 Is féidir cadhnraí AA a úsáid ar feadh níos mó ná 1 mí;
7. Tacaíonn sé leis antenna síneadh seachtrach, Oiriúnach do thimpeallachtaí suiteála uirlisí meaisín éagsúla, cobhsaíocht comhartha a chinntiú;

Nóta:
1. Solas táscaire stádais:
Solas comhartha (ciotóg): Bíonn an solas comhartha i gcónaí nuair a fheidhmítear an roth láimhe, agus ní lasann sé suas nuair nach bhfuil sé ag feidhmiú;
Solas aláraim ísealvoltais (Ar an gceart): Nuair a bhíonn an chumhacht ceallraí ró -íseal,Flashes nó fanann an solas aláraim air;
2. Cnaipe Cumasaigh:
Tar éis an cnaipe Cumasaigh a bhrú agus a choinneáil, Cuirtear na comharthaí roghnúcháin ais agus formhéadúcháin i ngníomh, agus tá an t -aschur ionchódóra cuisle bailí;
3. Cnaipe saincheaptha:
Is féidir le cnaipe gan aon fheidhm aschur lasc comhfhreagrach a rialú ar an nglacadóir;

Com1: Críochfort Coiteann le haghaidh Aschur Comharthaí Formhéadúcháin Roghnú Ais; is féidir é a nascadh le comhartha poiblí 0-24V
Com2: Comhréirfort comhréireach de 3 Aschuir chnaipe saincheaptha;

*Is féidir roghnú agus formhéadú ais a roghnú trí bhogearraí, códú nó pointe go pointe, Téigh i gcomhairle leis an bhfoireann le haghaidh sonraí le do thoil

The final interpretation right of this product belongs to our company.