The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Feartan gnìomh toraidh

1. Adopting 433MHz wireless communication technology, le astar obrachaidh gun uèir de 100 meters.
2. Adopt automatic frequency hopping function and use 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhongchen, INVT, agus . For brands
that are not compatible, please contact us for customization.
4. Thoir taic do riaghladh astar, A 'tòiseachadh, and current reading of large motor frequency converters.
5. Taic air an làimh chlì agus a 'deasachadh clàr-atharrachaidh inneal-atharrachaidh malairt astar, A 'tòiseachadh, Beulaibh, air ais, left and right control.
6. Support linear correction of left and right track frequency converters to keep the machine walking in a
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Sònrachaidhean toraidh

4. Ro-ràdh gnìomh toraidh

Notaichean:
①Screen display:

②Mode switch:

③Enable:
Combination buttons, some operations require holding down the enable button for operation,see the instructions for each switch for details.
④Large motor switch:
Using a 3-speed reset switch, pulling this switch can control the forward and reverse rotation of the large motor. An dèidh a leigeil a-mach, the state will remain, and there will be corresponding displays on the screen. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤Small motor forward/reverse switch:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Using a multi turn encoder knob, press the enable button, turn the knob right, and display the straight line correction: Df: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 aonad; Turn left knob, straight line correction display: Df: On the right, every turn of the knob increases by 1 aonad, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Using a 3-speed reset switch, when manually operated, the small motor can be controlled to turn left or right. Once released, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ Large motor speed regulation:
Using a multi turn encoder knob, rotating 1 grid each time, the speed value of the large motor changes by approximately 0.2 units. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Using a multi turn encoder knob, in manual mode, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 units, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 units. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. Sgeama accessory bathar a

6. Stiùireadh stàlaidh toraidh
6.1 Ceumannan stàladh toraidh
1. Stàlaich an cuidhteas a-steach don chaibineat dealain tron ​​​​bhucall air a ’chùl, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Thoir sùil air an diagram uèiridh cuidhteas againn agus dèan coimeas eadar e agus an uidheamachd agad air an làrach. Connect the equipment to the receiver through wires.
3. After fixing the receiver, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. Thathas a 'moladh a chuir air mullach caibineat dealain airson buaidh nan comharran as fheàrr. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Mu dheireadh, install the battery on the remote control, tighten the battery cover, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Meudan stàlaidh a 'chuirp

6.3 Diagram iomraidh a 'ghlacadair uèirneachd

7. Stiùireadh obrachadh toraidh
7.1 Remote Control Parameter Settings
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, adjust the speed of the small motor to 25 on both sides, or 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 times;
Use the “Small Motor Speed Control” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, turn the page to the end,Tagh “Save” to exit, and press the enable button to exit the menu;
The parameters are as follows:
An sruth as àirde: feedback range of large motor current, set range 15-200A, bunaiteach 100;
Speed control parameters: Automatic mode, small motor automatically accelerates faster or slower,the smaller the faster, set range 200-1500, bunaiteach 800;
Paramadair luasgaidh: Set the upper limit that allows the motor speed to change. When the current changes beyond this value, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, with a range of 05-12 and a default of 06;
Luathachadh a1: The larger the motor speed, the faster it increases, with a range of 00-06 and a default of 01;
Luas-luachadh a2: The larger the motor speed, the faster it decreases, with a range of 00-06 and a default of 02;
Enable speed regulation: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Start self-locking: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Coiseachd as àirde: maximum speed of left and right motors, range 10-100, bunaiteach 50;
Cutting current: maximum cutting current, displayed on the screen as IC value, range 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Default speed limit: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatic mode: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 to 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
An neach-aoigheachd as àirde: maximum speed of the large motor, range 10-100, bunaiteach 50;
Mbus equipment (mandatory): Selection of large motor frequency converter model, range 00-03, bunaiteach 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）
SBUS equipment (mandatory): Small motor frequency converter model selection, range 00-05, bunaiteach 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）

04-Anchuanda 05-None

7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, agus
the large motor frequency converter to 3
7.3 Remote Control Operation Instructions
1. Power on the machine, turn on the remote control, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (skip this step if the machine manufacturer has already set it);
2. Set the parameters of the frequency converter (skip this step if the machine manufacturer
has already set it);
3. Set the remote control to manual mode, and then use the remote control to move the machine to
the working position;
4. Ann am modh làimhe, set the cutting current of the large motor to IC and the speed of the large motor
5. Switch to automatic mode and set the cutting speed limit F value for the small motor;
6. In automatic mode, turn the large motor switch to forward to start the large motor, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Product troubleshooting

9.Maintenance
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Mura cleachdeadh e airson ùine mhòr, please remove the battery and store the remote control and battery in a clean
and safe place.
6.Rè stòradh agus còmhdhail, attention should be paid to moisture and shock resistance.

10. Fiosrachadh sàbhailteachd
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. Ma tha feum air càradh, Cuir fios chun neach-dèanamh. Ma tha am milleadh air adhbhrachadh le fèin-chàradh, the manufacturer
will not provide warranty.

Modail: DH01R-4W-26K

Uidheam iomchaidh:various industrial equipment

2.Diagram accessoriest

Thoir an aire: Faodaidh tu aon de na trì antennas a thaghadh. The suction cup antenna is standard by default.

3.Product model description

Thoir an aire:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 to 2, indicating that there are 1 to 2 Innealan analog(maximum 2 seanalan); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, msaa.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Feartan

1）Maximum 26 Toraidhean sealaidheachd;
2）Maximum 4 seanalan analog 0-10v toradh (Faodar raon taisbeanaidh a ghnàthachadh): a 'toirt taic 2 Sianalan de thoraidhean pestated didseatach iomallach;
3）2 analog inputs; agus air a thaisbeanadh air an smachd iomallach, Faodar an raon taisbeanaidh a ghnàthachadh
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA bataraidhean AA, low power consumption design;
6） Wireless operation distance is 200 meatairean;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.Tuairisgeul suidse smachd iomallach

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

Bholtaids ìosal: Tha am bataraidh smachd iomallach ro ìosal, please replace the battery.

Chaidh an lìonra sìos: Tha an comharra gun uèir air a bhriseadh. Feuch an toir thu sùil air cumhachd a’ ghlacadair, cumhachd a thoirt air a-rithist, and restart the remote control.

7.Stiùireadh gnìomh gnìomh smachd iomallach

1） Turn on the remote control
Nuair a thèid an inneal-glacaidh a chuir air, the receiver working indicator flashes; stàlaich dà bataraidh AA anns an smachd iomallach, cuir air an tionndadh cumhachd, and the display shows a value,a’ comharrachadh toiseach tòiseachaidh soirbheachail. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
Nuair a thèid am putan stad èiginneach a bhrùthadh, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Leig às a 'chlàr paramadair: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 to 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 to 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 to 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;

8.Feartan dealain smachd iomallach

9.Meud smachd iomallach

The final interpretation right of this product belongs only to our company.

Modail: DH12S-P6S

Uidheam iomchaidh:inneal sàbhaidh uèir / lann

2.Diagram accessoriest

Thoir an aire: Faodaidh tu aon de na trì antennas a thaghadh. The suction cup antenna is standard by default.

3.Tuairisgeul suidse smachd iomallach

4.Ro-ràdh susbaint taisbeanaidh

Prìomh astar motair: Prìomh: 0-50
Astar motair siubhail: Loidhne: 0-50
An ìre as àirde de astar motair siubhail gearraidh fèin-ghluasadach: Luas: 0-30
(paramadairean a ghabhas atharrachadh)
Gearradh fèin-ghluasadach prìomh shuidheachadh motair an-dràsta: Suidheachadh: 28 (paramadairean a ghabhas atharrachadh)
Luas motair gàirdean swing: swing: 0-50

Bholtaids ìosal: Tha am bataraidh smachd iomallach ro ìosal, please replace the battery.

Chaidh an lìonra sìos: Tha an comharra gun uèir air a bhriseadh. Feuch an toir thu sùil air cumhachd a’ ghlacadair, cumhachd a thoirt air a-rithist, and restart the remote control.

5.Stiùireadh gnìomh gnìomh smachd iomallach

1） Tionndaidh air an smachd iomallach

Nuair a thèid an inneal-glacaidh a chuir air, tha an solas cumhachd D2 air a’ ghlacadair an-còmhnaidh air adhart, agus bidh an solas comharra D1 a’ tòiseachadh a’ lasadh; stàlaich dà bataraidh AA anns an smachd iomallach, cuir air an tionndadh cumhachd, agus seallaidh an taisbeanadh astar motair, indicating successful startup.

2） Riaghladh motair mòr is astair / Prìomh motair agus riaghladh astair

Brùth agus cum “Riaghladh Astair Dèan comas”, tionndaidh an “Air adhart / air ais” tionndadh air adhart, agus tionndaidhidh prìomh motair a’ ghlacadair air;
Brùth agus cum “Riaghladh Astair Dèan comas”, tionndaidh an “Air adhart / air ais” tionndadh air ais, agus tionndaidhidh prìomh motair a’ ghlacadair air ais agus tionndaidhidh e air;Dìreach gluais an suidse chun t-slighe mheadhanach no cùil, agus stadaidh am prìomh motair sa bhad gun a bhith a’ putadh air a ’phutan comas smachd astair;Rothaich an “motair mòr” snaidhm gus bholtadh riaghlaidh astair prìomh inneal-tionndaidh motair a’ ghlacadair atharrachadh gu 0-10V;

3） Motair siubhail

Brùth agus cum “Dèan comas air atharrachadh astar”, tionndaidh an “Air adhart / air ais” tionndadh air adhart no air ais, agus gluaisidh an motair coiseachd aig astar àrd de 50;

4） Motair gàirdean swing agus riaghladh astar

Tionndaidh an “Gàirdean swing / cùl” tionndaidh gu gàirdean swing no teicheadh, agus bidh motair gàirdean swing a’ ghlacadair a’ tòiseachadh; an uairsin tionndaidh an “Atharrachadh Luas” snaidhm gus astar motair gàirdean swing atharrachadh;

Brùth agus cum “Dèan comas air atharrachadh astar”, agus an uairsin tarraing an “Gàirdean swing / cùl” tionndadh, gluaisidh an motair gàirdean swing aig astar àrd de 50;

5） Atharrachadh crìoch astar motair siubhail

Brùth agus cùm an “comas atharrachadh astar” putan agus cuairteachadh an “rèiteachadh luaths” gus an ìre astair as àirde den motair siubhail atharrachadh rè gearradh fèin-ghluasadach;

6） Gearradh fèin-ghluasadach

Is e a’ chiad cheum am prìomh motair a thòiseachadh; is e an dàrna ceum an ìre astair as àirde den motair coiseachd atharrachadh; Is e an treas ceum gluasad a dhèanamh “air adhart / air ais” gluais air adhart no air ais gus a dhol a-steach don mhodh gearraidh fèin-ghluasadach;

7） Clàr paramadair (tha luchd-cleachdaidh toirmisgte bho bhith ga atharrachadh gun chead)

Cuir a-steach an clàr-taice paramadair:Ann am modh làimhe, nuair a tha am prìomh astar motair 0, brùth an tionndadh air adhart / air ais suas trì tursan ann an sreath, agus an uairsin brùth sìos e trì tursan ann an sreath gus a dhol a-steach don chlàr paramadair;
Leig às a 'chlàr paramadair: Tionndaidh am putan atharrachaidh luaths, tagh sàbhail no na sàbhail, agus brùth air a’ phutan comas gus dearbhadh;
Ìre gnàthach: An luach as àirde den phrìomh shruth motair, aonad Ampere;
Paramadairean atharrachadh astar: Paramadairean smachd gearraidh fèin-ghluasadach, bunaiteach 800, aonad milli dàrna,tha atharrachadh air a thoirmeasg;
Paramadair luasgaidh: Nuair a tha luach an atharrachaidh sruth gearraidh nas àirde na an luach seo, tha luathachadh luath a’ tòiseachadh, aonad Ampere;
Luathachadh a1: Nuair a tha an sruth gearraidh nas ìsle na an sruth gearraidh seata, chaidh an luach astair àrdachadh le gach luathachadh den motair coiseachd;
Luas-luachadh a2: Nuair a tha an sruth gearraidh nas àirde na an sruth gearraidh seata, an luach astair air a lughdachadh le gach luadhadh den motair coiseachd;
Gàirdean swing an-dràsta: Luach bunaiteach, tha atharrachadh air a thoirmeasg;
Stad ùine: Às deidh am modh fèin-ghluasadach dùnadh cus luchdachadh gnàthach, thèid an sruth a lorg a-rithist às deidh ùine. Ma tha e nas lugha na an sruth stèidhichte, tòisichidh an motair coiseachd gu fèin-ghluasadach; aonad san dàrna h-àite, luach bunaiteach, tha atharrachadh air a thoirmeasg;
An sruth as àirde: An raon de phrìomh fios air ais motair an-dràsta, aonad Ampere;
An neach-aoigheachd as àirde: Smachd iomallach prìomh raon taisbeanaidh atharrachadh astar motair;
Coiseachd as àirde: Paramadair mì-dhligheach;
Cuir dheth crìoch astair: Aig àm gearradh fèin-ghluasadach, an taisbeanadh smachd aig astar astar motair coiseachd = 50% den pharamadair seo;
Meudachadh cugallachd: Nuair a bhios sruth fios air ais prìomh motair ag àrdachadh, gach uair a thèid an àrdachadh thairis air an luach seo, bidh an motair coiseachd a’ luathachadh;
Lùghdachadh cugallachd: Nuair a lùghdaicheas sruth fios-air-ais a’ phrìomh motair, agus a h-uile uair a tha an luach a tha a 'lùghdachadh nas àirde na an luach seo, bidh an motair coiseachd a’ dèanamh moille;
Cugallachd air a chothromachadh: Cuir ris agus thoir air falbh àrdachadh air a’ pharameter cugallachd;
Suidhich sruth: Gearradh fèin-ghluasadach, stairsneach sruth fios-air-ais prìomh motair. Ma thèid an luach seo thairis air,bidh an motair coiseachd a’ tòiseachadh a’ mealladh;Fon luach seo, bidh an motair coiseachd a’ tòiseachadh a ’luathachadh;aonad: Aimpeir;
Slighe a-mach gun stad: Nuair a thòisicheas am modh fèin-ghluasadach, ma tha sruth fios air ais prìomh motair nas lugha na an luach seo,bidh e sa mhodh idling.Ma tha e nas motha na an luach seo, fàgaidh e am modh idling agus thèid e a-steach don mhodh gearraidh.Unit is ampere;
Gun-luchdachadh an-dràsta:Nuair a thòisicheas am modh fèin-ghluasadach, ma tha sruth fios air ais prìomh motair nas lugha na an luach seo,tha e ann am modh gun luchd. Ma tha e nas motha na an luach seo, fàgaidh e am modh gun luchd agus cuir a-steach am modh gearraidh;
Luas gàirdean swing: Astar tùsail motair gàirdean swing nuair a thòisicheas tu;
Modh gearraidh: Atharraich eadar modhan sàbhaidh lann agus sàbh uèir, agus gluaisidh na paramadairean a rèir sin às deidh an tionndadh; ann am modh sàbhaidh lann, bidh an taisbeanadh smachd iomallach a’ cur motair gàirdean swing ris, fhad 'sa tha e ann am modh sàbhaidh uèir, chan eil motair gàirdean swing ann;
Ùine debounce: Nuair a tha sruth fios-air-ais prìomh motair nas àirde na an sruth stad, thèid an t-sruth fios-air-ais a lorg gu leantainneach. Is e an ùine deasbaid fad an lorg leantainneach seo.After this time, ma tha am prìomh shruth motair fhathast nas àirde na an sruth stad, stadaidh an motair coiseachd;eile, stadaidh an motair coiseachd. Cumaidh an motair a’ dol;
Cuir stad air an t-sruth: Tha am prìomh shruth fios air ais motair nas àirde na an luach seo, agus stadaidh an motair coiseachd;Tha an aonad Ampere;
Offset default: Luach tùsail crìoch astair motair coiseachd nuair a thèid an smachd iomallach a thionndadh air = 50% den luach seo;

6.Feartan dealain smachd iomallach

7.Meud smachd iomallach

The final interpretation right of this product belongs only to our company.

Modail: DH12S-LD

Uidheam iomchaidh:crawler wire saw machine

Diagram accessoriest

Thoir an aire: Faodaidh tu aon de na trì antennas a thaghadh. The suction cup antenna is standard by default.

Tuairisgeul suidse smachd iomallach

Ro-ràdh susbaint taisbeanaidh

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (paramadairean a ghabhas atharrachadh)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)

Bholtaids ìosal: Tha am bataraidh smachd iomallach ro ìosal, please replace the battery.

Chaidh an lìonra sìos: Tha an comharra gun uèir air a bhriseadh. Feuch an toir thu sùil air cumhachd a’ ghlacadair, cumhachd a thoirt air a-rithist, and restart the remote control.

Stiùireadh gnìomh gnìomh smachd iomallach

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, cuir air an tionndadh cumhachd, andthe display will show the motor speed, indicating successful startup.

2.Large motor and speed regulation

Tionndaidh an “air adhart / air ais” tionndadh air adhart, the receiver’s large motor will turn on, and the display will show forward

Tionndaidh an “air adhart / air ais” tionndadh air ais, the large motor of the receiver will turn on in reverse, and the display will show reverse

Rothaich an “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “air adhart / air ais” tionndadh air adhart, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Tionndaidh an “Air adhart / air ais” tionndadh air ais, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Tionndaidh an “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Tionndaidh an “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

Ann am modh làimhe:
Turn left in place: Brùth agus cùm an “Enable” putan, tionndaidh an “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Brùth agus cùm an “Enable” putan, tionndaidh an “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

In automatic mode: press and hold the “Enable” putan agus cuairteachadh an “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Gearradh fèin-ghluasadach

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Ann am modh làimhe, press and hold the “Enable” putan agus cuairteachadh an “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 to 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (tha luchd-cleachdaidh toirmisgte bho bhith ga atharrachadh gun chead)

Some functions of the remote control can be adjusted through parameters. Ann am modh làimhe, when the small motor speed S2 is 10, brùth an tionndadh air adhart / air ais suas trì tursan ann an sreath, and then push it down three times in a row to enter the parameter menu;
Leig às a 'chlàr paramadair: choose to save or not save, then press the enable button to confirm the exit;
An sruth as àirde: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, bunaiteach 800, tha atharrachadh air a thoirmeasg;
Paramadair luasgaidh: automatic cutting control parameter. Nuair a tha luach an atharrachaidh sruth gearraidh nas àirde na an luach seo,deceleration begins.
Luathachadh a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Luas-luachadh a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Coiseachd as àirde: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Cuir dheth crìoch astair: the maximum speed of the small motor during automatic cutting.
An neach-aoigheachd as àirde: maximum speed of large motor.

Feartan dealain smachd iomallach

Meud smachd iomallach

The final interpretation right of this product belongs only to our company.

Modail：ATWGP-12

Adaptation system: all CNC systems with handwheel interface

This product is a manual pulse generator used with CNC machine tools. It has beenwidely used in fields such as CNC machine tools, CNC lathes, machining centers,CNC engraving and milling machines. This product uses wireless transmissiontechnology, eliminating the need for traditional spring wire connections, reducingequipment failures caused by cables, eliminating cable drag, oil and other contamination, agus a 'dèanamh obrachadh nas goireasaiche. The product package includes the receiver and wireless electronic handwheel. The receiver is connected to the CNC equipment through a network cable, and the electronic handwheel (hand pulse generator) is connected and communicated with the receiver through wireless transmission technology. The operator holds the handwheel and can get rid of the connection constraints of the spring wire and move freely. For large-scale gantry milling, CNC lathes, traveling machine tools, cutting and other applications, it brings great convenience and improves work efficiency.

Supports various system brands such as Siemens, Mitsubishi, Fanuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Using the 433MHZ wireless communication frequency band, the wireless operating distance is 40 meatairean;
2. Adopt automatic frequency hopping function and use 32 sets of wireless handwheels at the same time without affecting each other;
3. Supports emergency stop button and 3 custom button switch outputs;
4. Supports multiple axis selections of 6-axis, 7-axis, 8-axis, 9-axis, 10-axis and 12-axis, with 3-speed and 4-speed magnification.Axis selection and magnification switches support various signal types such as binary coding, point-to-point, gray code, msaa.;
5. Supports 5V differential pulse signal, 24V pulse signal and other pulse signal types;
6. Dealbhadh caitheamh cumhachd ìosal, 2 AA batteries can be used for more than 1 month;
7. Supports external extension antenna, suitable for various machine tool installation environments, ensuring signal stability;

Thoir an aire:
1. Status indicator light:
Signal light (left): The signal light is always on when the handwheelis operated, and does not light up when not operating;
Solas rabhaidh bholtachd ìosal (right): When the battery power is too low,the alarm light flashes or stays on;
2. Enable button:
After pressing and holding the enable button, the axis selection and magnification signals are activated, and the pulse encoder output is valid;
3. Custom button:
A button without any function can control a corresponding switch output on the receiver;

COM1: Common terminal for axis selection magnification signal output; can be connected to 0-24V public signal
COM2: Common terminal of 3 custom button outputs;

*Axis selection and magnification can be selected through software, coding or point-to-point, please consult the staff for details

The final interpretation right of this product belongs to our company.

Adaptation system: all CNC systems with handwheel interface

This product is a manual pulse generator used with CNC machine tools. It has beenwidely used in fields such as CNC machine tools, CNC lathes, machining centers,CNC engraving and milling machines. This product uses wireless transmissiontechnology, eliminating the need for traditional spring wire connections, reducingequipment failures caused by cables, eliminating cable drag, oil and other contamination, agus a 'dèanamh obrachadh nas goireasaiche. The product package includes the receiver and wireless electronic handwheel. The receiver is connected to the CNC equipment through a network cable, and the electronic handwheel (hand pulse generator) is connected and communicated with the receiver through wireless transmission technology. The operator holds the handwheel and can get rid of the connection constraints of the spring wire and move freely. For large-scale gantry milling, CNC lathes, traveling machine tools, cutting and other applications, it brings great convenience and improves work efficiency.

Supports various system brands such as Siemens, Mitsubishi, Fanuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Using the 433MHZ wireless communication frequency band, the wireless operating distance is 40 meatairean;
2. Adopt automatic frequency hopping function and use 32 sets of wireless handwheels at the same time without affecting each other;
3. Supports emergency stop button and 3 custom button switch outputs;
4. Supports multiple axis selections of 6-axis, 7-axis, 8-axis, 9-axis, 10-axis and 12-axis, with 3-speed and 4-speed magnification.Axis selection and magnification switches support various signal types such as binary coding, point-to-point, gray code, msaa.;
5. Supports 5V differential pulse signal, 24V pulse signal and other pulse signal types;
6. Dealbhadh caitheamh cumhachd ìosal, 2 AA batteries can be used for more than 1 month;
7. Supports external extension antenna, suitable for various machine tool installation environments, ensuring signal stability;

Thoir an aire:
1. Status indicator light:
Signal light (left): The signal light is always on when the handwheelis operated, and does not light up when not operating;
Solas rabhaidh bholtachd ìosal (right): When the battery power is too low,the alarm light flashes or stays on;
2. Enable button:
After pressing and holding the enable button, the axis selection and magnification signals are activated, and the pulse encoder output is valid;
3. Custom button:
A button without any function can control a corresponding switch output on the receiver;

COM1: Common terminal for axis selection magnification signal output; can be connected to 0-24V public signal
COM2: Common terminal of 3 custom button outputs;

*Axis selection and magnification can be selected through software, coding or point-to-point, please consult the staff for details

The final interpretation right of this product belongs to our company.