Tuairisgeul
Modail toraidh
Modail: DH12S-LD
Uidheam iomchaidh:crawler wire saw machine
Diagram accessoriest
Thoir an aire: Faodaidh tu aon de na trì antennas a thaghadh. Tha an antenna cupa suidse àbhaisteach gu bunaiteach.
Tuairisgeul suidse smachd iomallach
Ro-ràdh susbaint taisbeanaidh
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (paramadairean a ghabhas atharrachadh)
Linear correction value: Tha Df: -99-99 (1 unit is about 0.02V)
Bholtaids ìosal: Tha am bataraidh smachd iomallach ro ìosal, Feuch an cuir thu an àite a 'bhataraidh.
Chaidh an lìonra sìos: Tha an comharra gun uèir air a bhriseadh. Feuch an toir thu sùil air cumhachd a’ ghlacadair, cumhachd a thoirt air a-rithist, agus ath-thòisich an smachd iomallach.
Stiùireadh gnìomh gnìomh smachd iomallach
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, cuir air an tionndadh cumhachd, andthe display will show the motor speed, a’ comharrachadh toiseach tòiseachaidh soirbheachail.
2.Large motor and speed regulation
Tionndaidh an “air adhart / air ais” tionndadh air adhart, the receiver’s large motor will turn on, and the display will show forward
Tionndaidh an “air adhart / air ais” tionndadh air ais, the large motor of the receiver will turn on in reverse, and the display will show reverse
Rothaich an “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “air adhart / air ais” tionndadh air adhart, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
Tionndaidh an “Air adhart / air ais” tionndadh air ais, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
Tionndaidh an “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
Tionndaidh an “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
Ann am modh làimhe:
Turn left in place: Brùth agus cùm an “Enable” putan, tionndaidh an “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: Brùth agus cùm an “Enable” putan, tionndaidh an “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
Ann am modh fèin-ghluasadach: press and hold the “Enable” putan agus cuairteachadh an “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.Gearradh fèin-ghluasadach
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Ann am modh làimhe, press and hold the “Enable” putan agus cuairteachadh an “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 gu 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (tha luchd-cleachdaidh toirmisgte bho bhith ga atharrachadh gun chead)
Faodar cuid de ghnìomhan an smachd iomallach atharrachadh tro pharaimearan. Ann am modh làimhe, when the small motor speed S2 is 10, brùth an tionndadh air adhart / air ais suas trì tursan ann an sreath, and then push it down three times in a row to enter the parameter menu;
Leig às a 'chlàr paramadair: tagh sàbhaladh no gun a shàbhaladh, then press the enable button to confirm the exit;
An sruth as àirde: the operating rated current of the cutting motor is 80% of this currentt;
Paramadairean smachd astar: automatic cutting control parameters, bunaiteach 800, tha atharrachadh air a thoirmeasg;
Paramadair luasgaidh: automatic cutting control parameter. Nuair a tha luach an atharrachaidh sruth gearraidh nas àirde na an luach seo,deceleration begins.
Luathachadh a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Luas-luachadh a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Tòisich fèin-ghlasadh: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Coiseachd as àirde: the maximum speed of the small motor.
Gearradh sruth: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
An crìoch astair bunaiteach: the default maximum speed of automatic cutting speed when turning on the machine.
Modh fèin-ghluasadach: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Cuir dheth crìoch astair: the maximum speed of the small motor during automatic cutting.
An neach-aoigheachd as àirde: maximum speed of large motor.
Feartan dealain smachd iomallach
Meud smachd iomallach
Buinidh còir mìneachaidh deireannach an toraidh seo don chompanaidh againn a-mhàin.
