1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 meatairean.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Taghadh Axis, Meusadh, and other information.
3. Cuir taic ri putan stad èiginneach, Swit IE Toradh comharra, and the hand wheel shutdown emergency stop is still valid.
4. A 'toirt taic 6 putanan gnàthaichte, switch IO signals, and can output signals to the system through IO wiring or communication.
Leabhar-làimhe stiùireadh cuibhle-làimhe dealanach uèirleas
Tuairisgeul
1. Ro-ràdh toraidh
Electronic handwheel is used for manual guidance, A 'suidheachadh, Co-thaobhadh innealan, agus Obrachaidhean Eile air Innealan Meagan CNC. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, Meusadh, buttons, andother signals through communication.
2.Product functional features
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 meatairean.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Taghadh Axis, Meusadh, and other information.
3. Cuir taic ri putan stad èiginneach, Swit IE Toradh comharra, and the hand wheel shutdown emergency stop is still valid.
4. A 'toirt taic 6 putanan gnàthaichte, switch IO signals, and can output signals to the system through IO wiring or communication.
5. A 'toirt taic 6 or 8 smachd axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. A 'toirt taic 3 or 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Thoir taic do neach-dèanaidh Pulse, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. Sònrachaidhean toraidh
| Handwheel working power supply voltage | DC24V/1A |
| Receiver power supply voltage | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10m |
| Receiver end cable length | 1m |
| Receiver end network cable length | 3m |
| Operating temperature | -25℃<X<55℃ |
| Anti-fall height | 1m |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.PRÌOMH Bathar a 'toirt ro-ràdh
Note:
Emergency stop button:
Brùth air a 'phutan stad èiginneach, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, Tha an èiginn èiginn ioe a 'toirt air falbh air a' ghlacadair dùinte, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 putanan gnàthaichte, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Brùth agus cùm am putan Dèan comas, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. Product accessory diagram
6. Stiùireadh stàlaidh toraidh
6.1 Product installation steps
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 Meudan stàlaidh a 'chuirp
6.3 Installation dimensions of aviation plugs
6.4 Diagram iomraidh a 'ghlacadair uèirneachd
7.Stiùireadh Obrachaidh toraidh
7.Stiùireadh Obrachaidh toraidh
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Tagh Meudachadh: Switch the magnification switch and select the magnification level you need.
7. A 'gluasad axis: Brùth agus cùm am putan Dèan comas, Tagh an tionndadh taghaidh Axis, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Brùth air a 'phutan stad èiginneach, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.Tuairisgeul modail toraidh
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : a 'riochdachadh an àireamh de suidsichean taghaidh Axis, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.
9.Product trouble shooting
10.Maintenance
1. Cleachd e ann an àrainneachd tioram aig teòthachd an t-seòmair agus cuideam gus a bheatha seirbheis a leudachadh.
2. Feuch nach bi thu a 'cleachdadh ann an àrainneachdan neo-àbhaisteach leithid uisge agus builgeanan uisge gus beatha na seirbheis a leudachadh.
3. Feuch an cùm thu coltas an rothair-làimhe glan gus a beatha seirbheis a leudachadh.
4. Feuch nach bi thu a 'crìonadh, A 'tuiteam, Bumping, msaa. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Mura cleachdeadh e airson ùine mhòr, please store the handwheel in a clean and safe place.During storage and transportation, Bu chòir aire a thoirt do taiseachd agus strì an aghaidh.
11. Fiosrachadh sàbhailteachd
1. Feuch an leugh thu an stiùireadh gu faiceallach mus cleachd thu agus toirmeasg neo-phroifeiseantaich bho bhith ag obair.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Ma tha feum air càradh, Cuir fios chun neach-dèanamh. Ma tha am milleadh air adhbhrachadh le fèin-chàradh, Cha toir an neach-dèanamh seachad barantais
