Ba a tantance ba – Fasaha WixhC https://www.wixhc.cn Jagora na masana'antu Wed, 05 Nov 2025 06:21:59 +0000 ha hourly 1 https://wordpress.org/?v=6.8.5 Wurin Koyar da Kayan Kayan Haske https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Gabatarwar Samfurin

Ana amfani da Hannun Haske na lantarki don jagorar jagora, sauya, kayan aiki jeri, da sauran ayyukan akan kayan aikin CNC. Wannan samfurin hanjin lantarki shine sietens ainihin nuni Wurin Wuri Mai Tsarki. An haɗa hannun jari ga X130 na dubawa na tsarin Siemens ta hanyar kebul na cibiyar sadarwa, Kuma ana karanta tsarin daidaitawa kuma ana nuna shi a allon lcd na hannu ta hanyar sadarwar yarjejeniya ta S7. MAREWHEELL na iya sarrafa zaɓin tsarin tsarin, daraja, mabaye, andother signals through communication.
2.Fasalolin kayan aiki
1. Yi amfani da CIGABA 6-CORE CIGABA DA AIKI, tare da kayan adon na handthheel 10 meters.
2. Allon hannun jari na iya nuna daidaitattun kayan aikin tsarin, kayan aiki na inji,yawan abinci, Zaɓin Axis, daraja, and other information.
3. Tallafawa maɓallin dakatarwar gaggawa, Canja fitowar Siplic, and the hand wheel shutdown emergency stop is still valid.
4. Goyi bayan 6 Button Buttons, Canja siginar IO, and can output signals to the system through IO wiring or communication.
5. Goyi bayan 6 ko 8 Axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Goyi bayan 3 ko 4 matakan sarrafa Gristation, with switch IO signals that can be output to the system through IO wiring or communication.
7. Tallafawa Ecreder Ecorder, 100 Putses / Kunna, can output signals to the system through AB pulse wiring.
8. Yana goyan bayan Siemens S7 Protecol da Siemens 828D, 840DSL, ONE and other model systems.

 

3. Bayanai na Samfuran
Hannun Hannu na Workarewa wadata DC24V / 1A
Mai karbar wutar lantarki DC24V / 1A
Mai karɓar kayan fitarwa na io DC24V
Hannun Beletarshen Tsawon Rage 10m
Reperiver ƙarshen tsinkaye 1m
Reperaramba mai karancin cibiyar sadarwa 3m
Operating zazzabi -25℃<X<55℃
Anti-Fall tsawo 1m
Adadin maballin al'ada 6
Girman samfurin 233*90.7*77.4(Mm)

4.Gabatarwar aikin Samfurin

Wasiƙa:
Maɓallin dakatarwar gaggawa:
Latsa maɓallin dakatarwar gaggawa, An dakatar da tsarin gaggawa biyu a kan mai karbar shi a kan mai karbar za'a cire shi, and all functions of the handwheel will be invalid.
Bayan sake dakatar da gaggawa, Fitar da gaggawa ta dakatar da fitarwa a kan mai karɓar, and all functions of the handwheel are restored.
Nunin allon:

 

Plc: 0000 yana nuna cewa ba a haɗa kebul ɗin hanyar sadarwa ba, Plc: 1010 indicates that the network cable is successfully connected to the PLC system.
Plc: 1110 yana wakiltar tarin bayanan tsarin da aka yi wa hannun jari, Plc: 0001 represents successful connection to the computer.
③ button na al'ada:
6 Button Buttons, Kowace mai dacewa da batun fitarwa na IO akan mai karɓa, also connected to the system through communication.
Canjin AXIS:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ kunna maballin:
Latsa ka riƙe maɓallin sauya ko maɓallin buɗe ido a garesu don kunna ɓoyayyen ɓataccen bugun jini ta hanyar girgiza shi. Da ƙungiyoyin biyu akan mai karɓa yana ba da izinin fitarwa don gudanarwa, release the enable button to enable IO output to disconnect.
Canjin Girma:Canjin Gyaran zai iya canza Gwargwadon
controlled by the handwheel.
⑦ Villse Eccoder:
Latsa ka riƙe maɓallin saiti, Shake The Passse Eckoder, Emit siginar bugun jini, and control the movement of the machine axis.
⑧ handwheel kebul:

USB Haɗa hannayen hannu da mai karɓa, Fitowa, used for handwheel power supply and communication.

5. Samfurin kayan Samfurin samfurin

6. Jagorar Shigarwa
6.1 Matakai na shigarwa
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Koma zuwa zane mai karbar kayan mu kuma ka kwatanta shi da kayan aikin ka. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Bayan gyara mai karbar, Shigar da jirgin sama mai saukar ungulu a hannun hagu na hannun jari a kan kwamitin, kuma toshe ɗayan ƙarshen tushe a cikin dubawa na hannu akan mai karɓar. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Rep reply shigarwa girma

6.3 Shigarwa yana girmama matattara

6.4 Mai karɓar zane-zanen zane
7.Umarnin aikin samfurin

1. Lokacin da mai karɓa ya yi amfani da kuma mai nuna alamar mai aiki da hasken mai karɓar mai karɓa, Haɗa mai karɓa zuwa kwamfutar tare da kebul na cibiyar sadarwa, Saita adireshin IP na komputa na kwamfuta, kuma yi amfani da software ɗin kayan aiki na cibiyar sadarwa don saita sigogin cibiyar sadarwa na aikin handwheel. Don takamaiman hanyoyin da aka tsara, koma ga “Lxwgp-ireddwheel mai amfani da Jagora Manual”.

2.Bayan an saita mai karba, Tsarin yana buƙatar shirin shirin shirin Plc. Da fatan za a koma zuwa “Lxwgp-ets daban mahimmancin Siemens tsarin sarrafa tsarin tsarin sarrafawa” and PLC program routine materials for details.

3.Bayan kammala saitunan da ke sama, dauki mai karba zuwa injin injin lantarki kuma shigar da shi. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Bayan kammala saitunan da ke sama, dauki mai karba zuwa injin injin lantarki kuma shigar da shi. Fitar da kebul na hanyar sadarwa daga kwamfutar ka toshe shi cikin XTERFEL na tsarin. Connect the receiver power supply and pulse line.
5. Zaɓi zaɓi naxis: Switch the axis selection switch and select the axis you want to operate on.
6. Zaɓi Gwargwadon: Switch the magnification switch and select the magnification level you need.
7. Moving Axis: Latsa ka riƙe maɓallin saiti, Zaɓi Canjin AXIS, Zaɓi Saukar da Gwargwadon, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Latsa ka riƙe kowane button na al'ada don kunna iso fitarwa na maɓallin mai dacewa a cikin mai karɓar, and release the button to turn off the output.
9. Latsa maɓallin dakatarwar gaggawa, da m gaggawa daina Io fitarwa na mai karba za'a cire shi, Za a kashe aikin handwheel, saki maɓallin dakatarwar gaggawa, da gaggawa dakatar da io fitarwa za a rufe, and the handwheel function will be restored.
8.Bayanin samfurin samfurin

① lxwgp yana wakiltar salon da ya wired, da mai karɓar sigogi
is an Ethernet interface.
② : Represents Siemens system specific.
③ : yana wakiltar adadin zaɓin zaɓi na AXIS, wakiltar gatari, kuma yana wakiltar
axes.
④ : yana wakiltar nau'in zaɓin axis da siginar girma, Wani wakilci
Alamar gabatarwa ta hanyar, and B represents encoded output signal.

9.Harshen Masara

10.Goyon baya
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Da fatan za a matsa lamba, shimfiɗa, bumping, riƙaƙa. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Idan ba'a yi amfani da shi ba, Da fatan za a adana hannayen hannu a cikin tsabta mai tsabta, attention should be paid to moisture and shock resistance.
11. Bayanin lafiya

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Idan wani yanayi mara kyau ya faru da hannun jari, Da fatan za a daina amfani da shi nan da nan da matsala. Kafin matsala, Haramun ne a sake amfani da Hannun Hannun Hannun Hadarin Lafiya don hana rikitarwa da ba a sani ba;
3. Idan ana buƙatar gyara, Da fatan za a tuntuɓi masana'anta. Idan lalacewa ta hanyar gyara kai, Mai masana'anta ba zai samar da garanti ba

 

]]>