The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Fasalolin kayan aiki

1. Adopting 433MHz wireless communication technology, tare da nesa mara waya mara amfani na 100 meters.
2. Yi amfani da aikin motsa jiki na atomatik da amfani 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhongchen, Yar riga, da . For brands
that are not compatible, please contact us for customization.
4. Tallafawa tsarin sauri, fara, and current reading of large motor frequency converters.
5. Taimako hagu da dama waƙar mai rubutaccen tsari, fara, na gaba, goya baya, left and right control.
6. Taimakawa Gyaran Layi na hagu da kuma masu sauya madaidaiciya masu Canje-kwamfuta don kiyaye injin tafiya cikin
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Bayanai na Samfuran

4. Gabatarwar aikin Samfurin

Bayanin kula:
Nuni ①screen nuni:

Karawar sauyawa:

③Enable:
Haɗuwa Buttons, Wasu ayyukan suna buƙatar rike maɓallin kunna don aiki,see the instructions for each switch for details.
④Large motor switch:
Yin amfani da Canjin Redawar 3, jawo wannan canjin zai iya sarrafa gaba da juyawa maimaitawa na babban abin da. Bayan sake shi, jihar zata kasance, Kuma za a iya nunawa da yawa a allon. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤small Motar gaba / juyawa juyawa:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Yin amfani da know ɗin da yawa, press the enable button, turn the knob right, and display the straight line correction: DF: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 guda ɗaya; Juya hagu, Nunin layi madaidaiciya madaidaiciya: DF: On the right, every turn of the knob increases by 1 guda ɗaya, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Yin amfani da Canjin Redawar 3, Lokacin da hannu ke aiki, Za a iya sarrafa ƙananan motar don juya hagu ko dama. Da zarar an sake shi, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ Babban Tsarin Mota:
Yin amfani da know ɗin da yawa, rotating 1 Grid kowane lokaci, da sauri darajar manyan canje-canje ta hanyar kusan 0.2 raka'a. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Yin amfani da know ɗin da yawa, A cikin yanayin jagora, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 raka'a, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 raka'a. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. Samfurin kayan Samfurin samfurin

6. Jagorar Shigarwa
6.1 Matakai na shigarwa
1. Shigar da mai karba a cikin majalisar lantarki ta hanyar fashewa a baya, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Koma zuwa zane mai karbar kayan mu kuma ka kwatanta shi da kayan aikin ka. Connect the equipment to the receiver through wires.
3. After fixing the receiver, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. An ba da shawarar sanya shi a saman ƙirar gidan waya don mafi kyawun tasirin tasiri. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Daga bisani, install the battery on the remote control, oneed murfin murfin baturin, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Rep reply shigarwa girma

6.3 Mai karɓar zane-zanen zane

7. Umarnin aikin samfurin
7.1 Saitunan sarrafawa na nesa
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, daidaita saurin karamin motar zuwa 25 on both sides, ko 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 sau;
Yi amfani da “Motar Motar Motar” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, Juya shafin zuwa ƙarshen,zaɓa “Save” to exit, and press the enable button to exit the menu;
Sigogi sune kamar haka:
Matsakaicin halin yanzu: feedback range of large motor current, set range 15-200A, ƙin cika alƙawari 100;
Sigogi masu sarrafawa: Yanayin atomatik, small motor automatically accelerates faster or slower,karami da sauri, set range 200-1500, ƙin cika alƙawari 800;
Rashin kunya: Set the upper limit that allows the motor speed to change. Lokacin da canje-canje na yanzu ya wuce wannan darajar, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, tare da kewayon 05-12 and a default of 06;
Hanzari A1: The larger the motor speed, the faster it increases, tare da kewayon 00-06 and a default of 01;
Yaudarar A2: The larger the motor speed, the faster it decreases, tare da kewayon 00-06 and a default of 02;
Sanya tsari mai sauri: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Fara kulle kai: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Mafi girman tafiya: maximum speed of left and right motors, iyaka 10-100, ƙin cika alƙawari 50;
Yanke na yanzu: maximum cutting current, displayed on the screen as IC value, iyaka 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Tsallaka iyaka iyaka: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Yanayin atomatik: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 zuwa 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Matsakaicin rundunar: maximum speed of the large motor, iyaka 10-100, ƙin cika alƙawari 50;
Mbus equipment (m): Selection of large motor frequency converter model, iyaka 00-03, ƙin cika alƙawari 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon)
Kayan sbus (m): Smallaramar Motoci Motar Motar Motoci, iyaka 00-05, ƙin cika alƙawari 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon)

04-Anchuanda 05-Babu

7.2 Saitin siginar sauyawa
1. Kabarin Jagora: Tashar sadarwa ta sadarwa
2. Sanarwar Maɓallin Mitar: ba da labari
3. Rashin Baud: 19200
4. Tsarin bayanai: Babu tabbaci, Tsarin bayanai<8-N-1>
5. Adireshin na gida: Saita mai rubutaccen mai juyawa zuwa 1, Maimaitawa mai sauyawa zuwa 2, da
the large motor frequency converter to 3
7.3 Umarnin aikin sarrafawa na nesa
1. Iko a kan injin, Kunna ikon nesa, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (Tsallake wannan matakin idan an riga an riga an saita shi);
2. Saita sigogi na maimaitawa (skip this step if the machine manufacturer
has already set it);
3. Saita ikon nesa zuwa yanayin jagora, and then use the remote control to move the machine to
the working position;
4. A cikin yanayin jagora, set the cutting current of the large motor to IC and the speed of the large motor
5. Canja zuwa Yanayin atomatik kuma saita saurin saurin da fa'idodi don karamin abin;
6. A yanayin atomatik, Juya babban abin hawa zuwa gaba don fara babban motar, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Magana na Samfurin

9.Goyon baya
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Idan ba'a yi amfani da shi ba, please remove the battery and store the remote control and battery in a clean
and safe place.
6.A lokacin ajiya da sufuri, attention should be paid to moisture and shock resistance.

10. Bayanin lafiya
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. Idan ana buƙatar gyara, Da fatan za a tuntuɓi masana'anta. Idan lalacewa ta hanyar gyara kai, the manufacturer
will not provide warranty.

Abin ƙwatanci: DH01R-4W-26K

Kayan aiki da aka zartar:Kayan aiki daban-daban

2.Kayan haɗi na samfur

Wasiƙa: Kuna iya zaɓar ɗaya daga cikin ukun ukun. The suction cup antenna is standard by default.

3.Bayanin samfurin samfurin

Wasiƙa:
Jerin Dh01r, Idan Sihiri ya ƙunshi t, Yana nufin tare da fitarwa na gaggawa;ba tare da t, it means without emergency stop output.

②If babu wani fitarwa na Analog, Babu buƙatar nuna tsinkaye 0w ko 0r; analogquantities w1, W2, W3, da w4 tsoho zuwa 0-10v Analog VolTage Fittage; a lokaci guda, W1 da W2 za a iya fadada su 2 ware dijital potenimeter, tare da kewayon 0 -5K ohms, To watt; ƙuduri: 20 ohms. Za'a iya amfani da damar dijital guda biyu don sarrafa waldi na yanzu da walda. Idan aka buƙaci fitarwa na dijital, user notes are required.

Input, jere daga 1 zuwa 2, nuna cewa akwai 1 zuwa 2 Abubuwan da aka shigar(m 2 tashoshi); Lokacin da akwai shigarwar Analog, Kuna buƙatar lura da kewayon wutar lantarki na shigarwar analog (mai karbar mu 0 -5V, Mai amfani zai iya lura da azaman 4-20 ma ko 0-10v, da sauransu) da daidaitattun nuni na adadin kwatankwacin Analog (misali: gwada 0-100 volts ko 0-1000 amsoshi)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Fasas

1) Matsakaicin 26 Relay Offuthuts;
2) Matsakaicin 4 tashoshin analog 0-10V (Ana iya tsara kewayon nunin): goyi bayan 2 tashoshin tashoshin fadada dijital potenimeter fitarwa;
3) Abubuwan da ke tattarawa 2; kuma nuna a kan ikon sarrafawa, Za'a iya tsara kewayon nuni
4) Tashoshi 1 na dakatar da gaggawa tsayawa tsaftataccen kayan aikin yau da kullun;
5) Powered by 3 AA batura, Tsarin amfani da wutar lantarki;
6) Nesa mara waya mara waya ita ce 200 ma'aurata;
7) Kariyar Kariyar IP67;
8) Tare da aikin canza shi, Yana goyan bayan giciye guda 4;
9）Back strap design.

5.Bayanin Mulki na nesa

6.Nuna Ganawar abun ciki

W1 Knob darajar: W1: 0-1000 (sigogi 0-9999)
W2 Knob darajar: W2: 0-5000 (sigogi 0-9999)
W3 knob darajar: W3: 0-5000 (sigogi 0-9999)
W4 knob darajar: W4: 0-5000 (sigogi 0-9999)
Nuni na adc1: 0-1000 (sigogi 0-5000)
Nuni adc2: 0-1000 (sigogi 0-5000)

Low wutar lantarki: Baturin sarrafawa na nesa ya yi ƙasa, please replace the battery.

Cibiyar sadarwa ta ragu: An katse siginar mara waya. Da fatan za a duba ikon mai karɓar, Iliminsa a sake, and restart the remote control.

7.Ayyukan Gudanar da Ayyuka na nesa

1) Kunna ikon nesa
Lokacin da mai karɓa ya kasance akan, Mai karɓar mai nuna alamun damuwa; Sanya baturan AA biyu a cikin ikon nesa, kunna kunna wutar lantarki, kuma nuna yana nuna darajar,yana nuna farawa mai nasara. The receiver working indicator light becomes solid.
2) Canji da maɓallin Button
Duk wani aiki na juyawa na juyawa da maɓallin nesa na iya sarrafa ma'anar shigarwar siginar siginar a kan mai karɓa. Duk wuraren fitowar siginar siginar a kan mai karba shine yawanci alamomi ta tsohuwa;
3) Daidaita W1-W4
Juya Knobs a W1-W4 ba da izini ba don yin amfani da siginar fitarwa ta Analog ko PotenIstOomomet a ƙarshen mai karɓa. Alamar fitarwa ta Analog a mai karɓa ta ƙarshe Presely Presals 0-10v Voltage siginar, da kuma siginar potentiomomometerometous zuwa 0-5K;
4) Aikin dakatar da gaggawa
Lokacin da aka matsa maɓallin dakatarwar gaggawa, Dukkanin abubuwan siginar canzawa an katse shi da fitowar Analog; Bayan an fitar da dakatar da gaggawa, Dukkanin siginar Canza an dawo dasu kuma an dawo da fitarwa na Analog; 5 seconds bayan an kashe madaurin nesa, Dukkanin abubuwan siginar canzawa ana cire haɗin da analog sau ɗaya ba canzawa ba. Lokacin da aka kunna m iko ya kunna, Signal siginar sauyawa yana murmurewa ta atomatik;
5) Menu na sigogi (An hana masu amfani daga canza shi a zahiri)
Wasu ayyukan sarrafawa na iya daidaita su ta hanyar sigogi. Lokacin da Nunin W1 = 0, Latsa maballin K9-B 3 Lokaci a jere, sannan danna maballin K9 3 Lokaci a jere don shigar da menu na sigari; Maɓallin K9-A da K9-B zuwa shafi kuma zaɓi sigogi; Riƙe K1-A, Kuma sannan danna maɓallin K9-A / B don gyara sigogi;
Fita menu na sigari: Zaɓi don ajiyewa ko ba a adana shi ba, Kuma sannan danna maɓallin K1 - maɓallin don tabbatar da ficewa;
Raya F1W1: Nunin kewayon nuna darajar W1 akan allon nuni, daidaitacce daga 0 zuwa 9999;
Raya FTEW2: Darajar nunin nuni na w2 knob akan allon nuni, daidaitacce daga 0 zuwa 9999;
RE3W3: Nunin kewayon nuna darajar w3 akan allon nuni, daidaitacce daga 0 zuwa 9999;
F4W4: Nunin kewayon kewayon kewayon w4 knob akan allon nuni, daidaitacce daga 0 to 9999
Rauni F5A1: Nuna darajar IDC1, 0-5000 wanda aka daidaita;
Ru6: Nuna darajar AdC2 nuni, 0-5000 wanda aka daidaita;
Arrawa: Saita darajar ƙararrawa don nuni da adc1 da adc2. Lokacin da AdC1 da AdC2 wuce wannan darajar, Nunin kula da nesa zai ƙararrawa; Lokacin da wannan darajar ita ce 0, aikin marinarrawa ba shi da inganci;

8.Ata nesa halaye na lantarki

9.Girman Cikakken

The final interpretation right of this product belongs only to our company.

Abin ƙwatanci: DH12S-P6S

Kayan aiki da aka zartar:wire saw/blade saw machine

2.Kayan haɗi na samfur

Wasiƙa: Kuna iya zaɓar ɗaya daga cikin ukun ukun. The suction cup antenna is standard by default.

3.Bayanin Mulki na nesa

4.Gabatarwa Gabatarwa

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(sigogi daidaitacce)
Automatic cutting main motor setting current: Setting: 28 (sigogi daidaitacce)
Swing arm motor speed: Swing: 0-50

Low wutar lantarki: Baturin sarrafawa na nesa ya yi ƙasa, please replace the battery.

Cibiyar sadarwa ta ragu: An katse siginar mara waya. Da fatan za a duba ikon mai karɓar, Iliminsa a sake, and restart the remote control.

5.Ayyukan Gudanar da Ayyuka na nesa

1）Turn on the remote control

Lokacin da mai karɓa ya kasance akan, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; Sanya baturan AA biyu a cikin ikon nesa, kunna kunna wutar lantarki, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, Juya “Gabatarwa / baya” Sauya zuwa gaba, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, Juya “Gabatarwa / baya” Sauya zuwa juyawa, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Juya da “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, Juya “Gabatarwa / baya” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Juya “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” canji, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Latsa ka riƙe “speed adjustment enable” Button kuma juya “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “Gabatarwa / baya” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (An hana masu amfani daga canza shi ba tare da izini ba)

Enter the parameter menu:A cikin yanayin jagora, when the main motor speed is 0, tura gaba / baya juyawa sau uku a jere, and then push it down three times in a row to enterthe parameter menu;
Fita menu na sigari: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, ƙin cika alƙawari 800, unit milli second,An haramta gyara;
Rashin kunya: Lokacin da yankan canji na yanzu ya wuce wannan darajar, rapid deceleration begins, unit Ampere;
Hanzari A1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Yaudarar A2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, An haramta gyara;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, An haramta gyara;
Matsakaicin halin yanzu: The range of main motor feedback current, unit Ampere;
Matsakaicin rundunar: Remote control main motor speed adjustment display range;
Mafi girman tafiya: Invalid parameter;
HUKUNCIN HUKUNCIN SAUKI: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Atomatik yanka, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;guda ɗaya: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Ata nesa halaye na lantarki

7.Girman Cikakken

The final interpretation right of this product belongs only to our company.

Abin ƙwatanci: Dh12s-ld

Kayan aiki da aka zartar:Waya mai rarrafe

Kayan haɗi na samfur

Wasiƙa: Kuna iya zaɓar ɗaya daga cikin ukun ukun. The suction cup antenna is standard by default.

Bayanin Mulki na nesa

Gabatarwa Gabatarwa

Babban saurin motsa jiki：S1：0-50
Motar Motar: S2: 0-50
Matsakaicin Buttomicrofatomatic:F:0-30(sifarar kai)
Atomatik yanka yankewa na yanzu: IC: 0-35 (sigogi daidaitacce)
Darajar gyara layin: DF: -99-99 (1 naúrar kusan 0.02v)

Low wutar lantarki: Baturin sarrafawa na nesa ya yi ƙasa, please replace the battery.

Cibiyar sadarwa ta ragu: An katse siginar mara waya. Da fatan za a duba ikon mai karɓar, Iliminsa a sake, and restart the remote control.

Ayyukan Gudanar da Ayyuka na nesa

1.Kunna ikon nesa

Lokacin da aka kunna, Haske na RF-LED a kan mai karɓa yana farawa zuwa Flash;Sanya baturan AA guda biyu a cikin bata lokaci, kunna kunna wutar lantarki, Kuma allon nuni zai nuna saurin motocin, indicating successful startup.

2.Babban abin hawa da tsari mai sauri

Juya “Gabatarwa / baya” Sauya zuwa gaba, babban abin da aka karba zai kunna, kuma nuna zai nuna gaba

Juya “Gabatarwa / baya” Sauya zuwa juyawa, babban motar mai karba zai juya a baya, kuma nuna zai nuna juyayi

Juya da “Babban daidaitawar motsi” Knob don daidaita babban kayan aikin gyara na mai karɓa 0-10v;

3.Karamin aiki da tsari mai sauri

Matsar da “Gabatarwa / baya” Sauya zuwa gaba, An kunna motar hagu na gaba da dama na mai karɓa gaba da mai karɓa, kuma nuna yana nuna gaba

Juya “Gabatarwa / baya” Sauya zuwa juyawa, An kunna batutuwan hagu da dama na mai karɓar mai karɓa, kuma nuni ya nuna baya

4.Juya hagu da dama

Juya “Hagu / dama” Sauya zuwa hagu, mai karbar dodel zai gabatar da kunna,kuma nuna zai nuna hagu

Juya “Juya hagu / dama” Sauya zuwa dama, ƙafafun hagu na mai karɓa zai gabatar da kunna, Kuma nuna zai nuna dama

5.Juya a wuri

A cikin yanayin jagora:
Juya hagu a wurin: Latsa ka riƙe “Ba dama” maƙulli, Juya “Hagu / dama juyawa” Sauya zuwa hagu, da hagu na baya baya da kuma ƙafafun dama gaba na mai karɓa,kuma fara juyawa hagu a wurin;

Juya dama a wurin: Latsa ka riƙe “Ba dama” maƙulli, Juya “Hagu / dama juyawa” Sauyawa zuwa dama, da hagu na hagu na gaba da dama na mai karɓar mai karɓa ya kunna, kuma mai karba ya fara juya dama a wurin;

6.Daidaitaccen Tsarin Motar Matsayi

A yanayin atomatik: Latsa ka riƙe “Ba dama” Button kuma juya “Motar Motar Motar” Don daidaita matsakaicin mafi yawan ƙananan motar yayin yankan atomatik;

7.Atomatik yanka

Mataki na farko shine fara babban abin hawa; mataki na biyu shine a canza yanayin zuwa “Mota”; Mataki na uku shine fara karamin motar kuma allon zai nuna “Yankan auto”,yana nuna cewa ya shigar da yanayin yankan atomatik;

8. Daidaitaccen layin layi

Lokacin da hagu da dama motoci suna ci gaba da baya, Hagu da hanzari na dama ba su da mahimmanci, da madaidaiciya-layin tafiya ya karkata. Kuna iya amfani da aikin gyara na layi na ikon nesa don daidaita saurin hagu da ƙafafun dama;
Yarjejeniyar gyara: Ta hanyar gyara, saurin hagu na hagu yayi kyau, Don haka da aiki tare da motocin hagu da dama da kuma kawar da karkacewa;
Hanyar Gyara Hadawa: A cikin yanayin jagora, Latsa ka riƙe “Ba dama” Button kuma juya “Karamin tsari mai sauri”;
Juya agogo don ƙara ƙarfin ƙwarewar bindigogi da ƙididdigar gyarawa akan allon nuni zai ƙaru;
Juyawa na kai tsaye don rage ƙarfin motocin hagu da kuma gyaran nuna ma'anar don ragewa;
Kewayon gyara: Darajar gyara -90 zuwa 90; Gyara wutar lantarki ɗaya daga cikin gyaran gyarawa kusan 0.02v;

9. Menu na sigari (An hana masu amfani daga canza shi ba tare da izini ba)

Wasu ayyukan sarrafawa na iya daidaita su ta hanyar sigogi. A cikin yanayin jagora, Lokacin da karamin motar da aka samu S2 ita ce 10, tura gaba / baya juyawa sau uku a jere, sannan tura shi ƙasa sau uku a jere don shigar da menu na sigari;
Fita menu na sigari: Zaɓi don ajiyewa ko ba a adana shi ba, Sannan danna maɓallin Mai kunna don tabbatar da ficewa;
Matsakaicin halin yanzu: da aiki da aka kimanta halin da ke faruwa 80% na wannan;
Sigogi masu sarrafawa: atomatik yanka sigogin sarrafawa, ƙin cika alƙawari 800, An haramta gyara;
Rashin kunya: atomatik yankan iko. Lokacin da yankan canji na yanzu ya wuce wannan darajar,deceleration begins.
Hanzari A1: atomatik yankan iko, Lokacin da yankan na yanzu ya ƙasa fiye da yanke na yanzu, saurin hanzari;
Yaudarar A2: atomatik yankan iko, Lokacin da yankan na yanzu ya fi saitin
Yanke na yanzu, saurin yaudara;
Atomatik retraction: ba daidai ba;
Fara kulle kai: 0, Babu makulli na kai; 1, kulle kai. Latsa maɓallin Mai kunna + forward and reverse to take effect and self-lock.
Mafi girman tafiya: the maximum speed of the small motor.
Yanke na yanzu: Saita matsakaicin halin yanzu na babban motar don yankan atomatik. Idan amsar ta wuce wannan darajar, it will start to decelerate.
Tsallaka iyaka iyaka: the default maximum speed of automatic cutting speed when turning on the machine.
Yanayin atomatik: 0, Ana sarrafa sayen atomatik; 1, the automatic switch controls the automatic IO output point.
HUKUNCIN HUKUNCIN SAUKI: the maximum speed of the small motor during automatic cutting.
Matsakaicin rundunar: maximum speed of large motor.

Ata nesa halaye na lantarki

Girman Cikakken

The final interpretation right of this product belongs only to our company.

Abin ƙwatanci：Atwgp-12

Tsarin daidaitawa: Dukkanin tsarin CNC tare da Injinan Marindwheel

Wannan samfurin babban janareta ne aka yi amfani da shi tare da kayan aikin CNC. An yi amfani da shi a cikin filayen kamar kayan aikin CNC, CNC Leates, Cibiyoyin Masara,CNC ƙirƙiranci da injunan milling. Wannan samfurin yana amfani da wiriki mara waya, Cire Buƙatar Buƙatar Haɗin Gargajiya, Rage kasawar da ke tattare da igiyoyi, kawar da kebul jan, mai da sauran gurbatawa, kuma yin aiki mafi dacewa. Kunshin Samfurin ya hada da mai karba da mara waya ta lantarki. An haɗa mai karɓar ga kayan aikin CNC ta hanyar kebul na cibiyar sadarwa, da kuma kayan aikin lantarki na lantarki (Hannun Generator) An haɗa shi da sadarwa tare da mai karɓa ta hanyar fasahar wirtress mara waya. Mai aiki yana riƙe da hannu kuma yana iya kawar da matsalolin haɗin da ke tattare da waya ta bazara da motsawa da yardar kaina. Don manyan-sikelin gantry milling, CNC Leates, Kayan aikin injin tafiya, yankan da sauran aikace-aikace, it brings great convenience and improves work efficiency.

Yana goyan bayan alamomi daban-daban kamar Siemens, Mitsubishi, Fiula, Taiwanxinai, BAYUAN, Faugor, Akizhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Yin amfani da Mita 433mhz mara waya mara waya, Distance na mara waya yana aiki 40 ma'aurata;
2. Yi amfani da aikin motsa jiki na atomatik da amfani 32 Sets na munanan mara waya mara waya a lokaci guda ba tare da shafan juna ba;
3. Yana goyan bayan maɓallin dakatarwar gaggawa da 3 maballin kwamfuta Canja wurin;
4. Yana goyan bayan zaɓin axis da yawa na 6-Axis, 7-aksis, 8-aksis, 9-aksis, 10-Axis da 12-Axis, tare da sauri-sauri da sauri girma.axis da sauya na ɗaukaka yana tallafawa nau'ikan sigina daban-daban, ma'ana-zuwa-maki, lambar launin toka, da sauransu;
5. Yana goyan bayan siginar murɗa, 24V siginar bugun fata da sauran nau'ikan siginar na bugun jini;
6. Tsarin amfani da wutar lantarki, 2 Za'a iya amfani da baturan AA na fiye da 1 wata;
7. Yana goyan bayan eriyar na waje, Ya dace da yanayin shigar injin da yawa daban-daban, Tabbatar da Alamar Zamani;

Wasiƙa:
1. Matsayi mai nuna haske:
Hasken siginar (na hagu): Hasken siginar koyaushe yana kan lokacin da hannun jari ke aiki, kuma baya haske lokacin da baya aiki;
Low voltage arar haske (na dama): Lokacin da ƙarfin baturi ya yi ƙasa,Fadakar ƙararrawa tana haskaka ko kuma ta tsaya;
2. Sanya maballin:
Bayan latsa da riƙe maɓallin Mai kunna, Ana kunna siginar adadin adadin, kuma fitowar bugun bugun jini yana da inganci;
3. Maballin al'ada:
Button ba tare da wani aiki na iya sarrafa fitarwa na sauyawa akan mai karɓa ba;

Com1: Tasirin gama gari don fitowar siginar na Axis; Za'a iya haɗa siginar 0-24v
Com2: Gama gari 3 Abubuwan Button Matsayi;

*Za'a iya zaɓar gyarawa da fifikon software ta hanyar software, coding ko maki-da-aya, Da fatan za a nemi ma'aikatan don cikakken bayani

The final interpretation right of this product belongs to our company.

Tsarin daidaitawa: Dukkanin tsarin CNC tare da Injinan Marindwheel

Wannan samfurin babban janareta ne aka yi amfani da shi tare da kayan aikin CNC. An yi amfani da shi a cikin filayen kamar kayan aikin CNC, CNC Leates, Cibiyoyin Masara,CNC ƙirƙiranci da injunan milling. Wannan samfurin yana amfani da wiriki mara waya, Cire Buƙatar Buƙatar Haɗin Gargajiya, Rage kasawar da ke tattare da igiyoyi, kawar da kebul jan, mai da sauran gurbatawa, kuma yin aiki mafi dacewa. Kunshin Samfurin ya hada da mai karba da mara waya ta lantarki. An haɗa mai karɓar ga kayan aikin CNC ta hanyar kebul na cibiyar sadarwa, da kuma kayan aikin lantarki na lantarki (Hannun Generator) An haɗa shi da sadarwa tare da mai karɓa ta hanyar fasahar wirtress mara waya. Mai aiki yana riƙe da hannu kuma yana iya kawar da matsalolin haɗin da ke tattare da waya ta bazara da motsawa da yardar kaina. Don manyan-sikelin gantry milling, CNC Leates, Kayan aikin injin tafiya, yankan da sauran aikace-aikace, it brings great convenience and improves work efficiency.

Yana goyan bayan alamomi daban-daban kamar Siemens, Mitsubishi, Fiula, Taiwanxinai, BAYUAN, Faugor, Akizhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Yin amfani da Mita 433mhz mara waya mara waya, Distance na mara waya yana aiki 40 ma'aurata;
2. Yi amfani da aikin motsa jiki na atomatik da amfani 32 Sets na munanan mara waya mara waya a lokaci guda ba tare da shafan juna ba;
3. Yana goyan bayan maɓallin dakatarwar gaggawa da 3 maballin kwamfuta Canja wurin;
4. Yana goyan bayan zaɓin axis da yawa na 6-Axis, 7-aksis, 8-aksis, 9-aksis, 10-Axis da 12-Axis, tare da sauri-sauri da sauri girma.axis da sauya na ɗaukaka yana tallafawa nau'ikan sigina daban-daban, ma'ana-zuwa-maki, lambar launin toka, da sauransu;
5. Yana goyan bayan siginar murɗa, 24V siginar bugun fata da sauran nau'ikan siginar na bugun jini;
6. Tsarin amfani da wutar lantarki, 2 Za'a iya amfani da baturan AA na fiye da 1 wata;
7. Yana goyan bayan eriyar na waje, Ya dace da yanayin shigar injin da yawa daban-daban, Tabbatar da Alamar Zamani;

Wasiƙa:
1. Matsayi mai nuna haske:
Hasken siginar (na hagu): Hasken siginar koyaushe yana kan lokacin da hannun jari ke aiki, kuma baya haske lokacin da baya aiki;
Low voltage arar haske (na dama): Lokacin da ƙarfin baturi ya yi ƙasa,Fadakar ƙararrawa tana haskaka ko kuma ta tsaya;
2. Sanya maballin:
Bayan latsa da riƙe maɓallin Mai kunna, Ana kunna siginar adadin adadin, kuma fitowar bugun bugun jini yana da inganci;
3. Maballin al'ada:
Button ba tare da wani aiki na iya sarrafa fitarwa na sauyawa akan mai karɓa ba;

Com1: Tasirin gama gari don fitowar siginar na Axis; Za'a iya haɗa siginar 0-24v
Com2: Gama gari 3 Abubuwan Button Matsayi;

*Za'a iya zaɓar gyarawa da fifikon software ta hanyar software, coding ko maki-da-aya, Da fatan za a nemi ma'aikatan don cikakken bayani

The final interpretation right of this product belongs to our company.