Takamaiman aikace-aikace don Siemens – Fasaha WixhC https://www.wixhc.cn Jagora na masana'antu Wed, 05 Nov 2025 06:21:59 +0000 ha hourly 1 https://wordpress.org/?v=6.8.3 Wurin Koyar da Kayan Kayan Haske https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Gabatarwar Samfurin

Ana amfani da Hannun Haske na lantarki don jagorar jagora, sauya, kayan aiki jeri, da sauran ayyukan akan kayan aikin CNC. Wannan samfurin hanjin lantarki shine sietens ainihin nuni Wurin Wuri Mai Tsarki. An haɗa hannun jari ga X130 na dubawa na tsarin Siemens ta hanyar kebul na cibiyar sadarwa, Kuma ana karanta tsarin daidaitawa kuma ana nuna shi a allon lcd na hannu ta hanyar sadarwar yarjejeniya ta S7. MAREWHEELL na iya sarrafa zaɓin tsarin tsarin, daraja, mabaye, andother signals through communication.
2.Fasalolin kayan aiki
1. Yi amfani da CIGABA 6-CORE CIGABA DA AIKI, tare da kayan adon na handthheel 10 meters.
2. Allon hannun jari na iya nuna daidaitattun kayan aikin tsarin, kayan aiki na inji,yawan abinci, Zaɓin Axis, daraja, and other information.
3. Tallafawa maɓallin dakatarwar gaggawa, Canja fitowar Siplic, and the hand wheel shutdown emergency stop is still valid.
4. Goyi bayan 6 Button Buttons, Canja siginar IO, and can output signals to the system through IO wiring or communication.
5. Goyi bayan 6 ko 8 Axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Goyi bayan 3 ko 4 matakan sarrafa Gristation, with switch IO signals that can be output to the system through IO wiring or communication.
7. Tallafawa Ecreder Ecorder, 100 Putses / Kunna, can output signals to the system through AB pulse wiring.
8. Yana goyan bayan Siemens S7 Protecol da Siemens 828D, 840DSL, ONE and other model systems.

 

3. Bayanai na Samfuran
Hannun Hannu na Workarewa wadata DC24V / 1A
Mai karbar wutar lantarki DC24V / 1A
Mai karɓar kayan fitarwa na io DC24V
Hannun Beletarshen Tsawon Rage 10m
Reperiver ƙarshen tsinkaye 1m
Reperaramba mai karancin cibiyar sadarwa 3m
Operating zazzabi -25℃<X<55℃
Anti-Fall tsawo 1m
Adadin maballin al'ada 6
Girman samfurin 233*90.7*77.4(Mm)

4.Gabatarwar aikin Samfurin

Wasiƙa:
Maɓallin dakatarwar gaggawa:
Latsa maɓallin dakatarwar gaggawa, An dakatar da tsarin gaggawa biyu a kan mai karbar shi a kan mai karbar za'a cire shi, and all functions of the handwheel will be invalid.
Bayan sake dakatar da gaggawa, Fitar da gaggawa ta dakatar da fitarwa a kan mai karɓar, and all functions of the handwheel are restored.
Nunin allon:

 

Plc: 0000 yana nuna cewa ba a haɗa kebul ɗin hanyar sadarwa ba, Plc: 1010 indicates that the network cable is successfully connected to the PLC system.
Plc: 1110 yana wakiltar tarin bayanan tsarin da aka yi wa hannun jari, Plc: 0001 represents successful connection to the computer.
③ button na al'ada:
6 Button Buttons, Kowace mai dacewa da batun fitarwa na IO akan mai karɓa, also connected to the system through communication.
Canjin AXIS:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ kunna maballin:
Latsa ka riƙe maɓallin sauya ko maɓallin buɗe ido a garesu don kunna ɓoyayyen ɓataccen bugun jini ta hanyar girgiza shi. Da ƙungiyoyin biyu akan mai karɓa yana ba da izinin fitarwa don gudanarwa, release the enable button to enable IO output to disconnect.
Canjin Girma:Canjin Gyaran zai iya canza Gwargwadon
controlled by the handwheel.
⑦ Villse Eccoder:
Latsa ka riƙe maɓallin saiti, Shake The Passse Eckoder, Emit siginar bugun jini, and control the movement of the machine axis.
⑧ handwheel kebul:

USB Haɗa hannayen hannu da mai karɓa, Fitowa, used for handwheel power supply and communication.

5. Samfurin kayan Samfurin samfurin

6. Jagorar Shigarwa
6.1 Matakai na shigarwa
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Koma zuwa zane mai karbar kayan mu kuma ka kwatanta shi da kayan aikin ka. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Bayan gyara mai karbar, Shigar da jirgin sama mai saukar ungulu a hannun hagu na hannun jari a kan kwamitin, kuma toshe ɗayan ƙarshen tushe a cikin dubawa na hannu akan mai karɓar. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Rep reply shigarwa girma

6.3 Shigarwa yana girmama matattara

6.4 Mai karɓar zane-zanen zane
7.Umarnin aikin samfurin

1. Lokacin da mai karɓa ya yi amfani da kuma mai nuna alamar mai aiki da hasken mai karɓar mai karɓa, Haɗa mai karɓa zuwa kwamfutar tare da kebul na cibiyar sadarwa, Saita adireshin IP na komputa na kwamfuta, kuma yi amfani da software ɗin kayan aiki na cibiyar sadarwa don saita sigogin cibiyar sadarwa na aikin handwheel. Don takamaiman hanyoyin da aka tsara, koma ga “Lxwgp-ireddwheel mai amfani da Jagora Manual”.

2.Bayan an saita mai karba, Tsarin yana buƙatar shirin shirin shirin Plc. Da fatan za a koma zuwa “Lxwgp-ets daban mahimmancin Siemens tsarin sarrafa tsarin tsarin sarrafawa” and PLC program routine materials for details.

3.Bayan kammala saitunan da ke sama, dauki mai karba zuwa injin injin lantarki kuma shigar da shi. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Bayan kammala saitunan da ke sama, dauki mai karba zuwa injin injin lantarki kuma shigar da shi. Fitar da kebul na hanyar sadarwa daga kwamfutar ka toshe shi cikin XTERFEL na tsarin. Connect the receiver power supply and pulse line.
5. Zaɓi zaɓi naxis: Switch the axis selection switch and select the axis you want to operate on.
6. Zaɓi Gwargwadon: Switch the magnification switch and select the magnification level you need.
7. Moving Axis: Latsa ka riƙe maɓallin saiti, Zaɓi Canjin AXIS, Zaɓi Saukar da Gwargwadon, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Latsa ka riƙe kowane button na al'ada don kunna iso fitarwa na maɓallin mai dacewa a cikin mai karɓar, and release the button to turn off the output.
9. Latsa maɓallin dakatarwar gaggawa, da m gaggawa daina Io fitarwa na mai karba za'a cire shi, Za a kashe aikin handwheel, saki maɓallin dakatarwar gaggawa, da gaggawa dakatar da io fitarwa za a rufe, and the handwheel function will be restored.
8.Bayanin samfurin samfurin

① lxwgp yana wakiltar salon da ya wired, da mai karɓar sigogi
is an Ethernet interface.
② : Represents Siemens system specific.
③ : yana wakiltar adadin zaɓin zaɓi na AXIS, wakiltar gatari, kuma yana wakiltar
axes.
④ : yana wakiltar nau'in zaɓin axis da siginar girma, Wani wakilci
Alamar gabatarwa ta hanyar, and B represents encoded output signal.

9.Harshen Masara

10.Goyon baya
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Da fatan za a matsa lamba, shimfiɗa, bumping, riƙaƙa. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Idan ba'a yi amfani da shi ba, Da fatan za a adana hannayen hannu a cikin tsabta mai tsabta, attention should be paid to moisture and shock resistance.
11. Bayanin lafiya

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Idan wani yanayi mara kyau ya faru da hannun jari, Da fatan za a daina amfani da shi nan da nan da matsala. Kafin matsala, Haramun ne a sake amfani da Hannun Hannun Hannun Hadarin Lafiya don hana rikitarwa da ba a sani ba;
3. Idan ana buƙatar gyara, Da fatan za a tuntuɓi masana'anta. Idan lalacewa ta hanyar gyara kai, Mai masana'anta ba zai samar da garanti ba

 

]]> Alamar Waya mara Kyau don CNC a tsaye Lethe Officle Umarnin https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Gabatarwar Samfurin

Ana amfani da ƙwararrun wirelin da aka sadaukar don CNC ta Vertical LOTES don jagora na Manual, sauya, saitin kayan aiki, da sauran ayyukan akan kayan aikin CNC na CNC. Wannan samfurin yana ɗaukar fasaha mara waya mara igiyar waya, Cire Buƙatar Buƙatar Haɗin Wiree na gargajiya, Rage kasawar kayan da ke haifar da igiyoyi, da kawar da rashin nasarar kebul na kebul, Yin aiki mafi dacewa. Ana zartar da yawa ga latunan waje kamar na CNC a tsakiyar ƙarfe, Single-Coldn tsaye a tsaye, da kuma shafi na tsaye-sau biyu a tsaye.it kuma za'a iya daidaita shi zuwa tsarin CNC da yawa a kasuwa, kamar Siemens,
Mitsubishi, Fiula, and Syntec.

2. Fasalolin kayan aiki

1. Da gangan 433 MHZ Wara Mayar da Wireless Fasaha, tare da nesa mara waya mara amfani na 40 meters.
2.Aiwatar da aikina na atomatik da amfani 32 Saitunan masu sarrafa mara waya mara nisa lokaci guda, without affecting each other.
3. Tallafawa maɓallin dakatarwar gaggawa, switch IO signal output.
4. Goyi bayan 2 Button Al'ada, with switch-type IO signal output.
5. Goyi bayan -2 axis control.
6. Supports 3-level magnification control.
7. Goyi bayan aikin Mai kunna, wanda zai iya fitarwa akan / kashe sigina da zaɓin axis, Daidaita mahimmanci, Elder.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Yana goyan bayan rufaffiyar bugun jini, Tare da ƙayyadadden 100 pulses per revolution.
3. Bayanai na Samfuran
Gudanar da ƙarfin lantarki da na yanzu na nesa mara nauyi
3V / 14
Bayanin baturi 2 AA alkaline batir, size 5
Letarancin ƙararrawa mai amfani da mara waya < 2.3V
Mai karbar wutar lantarki DC5V-240 / a
Reparancin gaggawa na gaggawa AC125V-1A / DC30V-2A
Mai karɓa yana kunna kewayon kaya
AC125V-1A / DC30V-2A
Mai karɓa a cikin kewayon button tsari DC24V / 50ma
Mai karɓar zaɓi zaɓi zaɓi DC24V / 50ma
Reparancin kewayon fitarwa DC24V / 50ma
Ikon watsa hankali na tashar jiragen ruwa
15dbm
Rep receiver samu hankali -100dbm
Mitar sadarwa mara waya 433MHZ Fita
Nisan sadarwa mara waya Rashin nisa na nesa 40 ma'aurata
Yawan zafin jiki -25℃ < X < 55℃
Anti Fall tsawo 1 (ma'ainu)
Adadin maballin al'ada 2
4. Gabatarwar aikin Samfurin



Bayanin kula:

① Villse Eccoder:
Latsa ka riƙe maɓallin saiti, Shake The Passse Eckoder, Emit siginar bugun jini,and control the movement ofthe machine axis.
② kunna maballin:
Latsa ko dai na kunna maɓallin a kowane bangare, da kuma saiti biyu na ba da damar fitarwa a kan mai karɓa da zai gudanar. Saki maɓallin Mai kunna don cire haɗin kunna IOO; Kuma kafin sauya girman zaɓi na Axis da girgiza hannun jari,Mai kunna maɓallin yana buƙatar riƙe ƙasa don zama mai tasiri; This function can be cancelled through configuration software.

③ fitilun masu nuna alama:
Hagu na hagu: iko akan haske,ADDWEL yayi amfani da Axis don zaɓar wuta akan, Kuma wannan hasken ya tsaya a bayan iko;
Haske na tsakiya: Hasken sigina wanda ya kunna lokacin da yake aiki kowane aiki na aikin hannu, kuma baya haske lokacin da babu wani aiki;
Haske na dama: Low voltage arar haske, Karancin baturi,Wannan hasken wuta ko ya tsaya, battery needs to be replaced.

④ Button Tsawon Gaggawa:
Latsa maɓallin dakatarwar gaggawa, An dakatar da tsarin gaggawa biyu a kan mai karbar shi a kan mai karbar za'a cire shi, and all functions of the handwheel will be invalid.

Canjin Girma:
Latsa ka riƙe maɓallin Mai kunna don canza Canjin Grightiation, which can switch the magnification controlled by the handwheel.

Canjin AXIS (Canjin wuta):
Latsa ka riƙe maɓallin saiti don sauyawa sauyawa na AXIS, wanda zai iya sauya motsi na axis wanda aka sarrafa ta hannun hannu. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ button na al'ada:
Button Button biyu, each corresponding to an IO output point on the receiver.

5. Samfurin kayan Samfurin samfurin

6. Jagorar Shigarwa
6.1 Matakai na shigarwa

1. Shigar da mai karba a cikin majalisar lantarki ta hanyar fashewa a baya, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Koma zuwa zane mai karbar kayan mu kuma ka kwatanta shi da kayan aikin ka. Connect the equipment to the receiver via cables.
3.Bayan mai karba yana da kyau, eriyar da aka sanya tare da mai karbar dole ne a haɗa shi, Kuma ya kamata a shigar da ƙarshen eriya ko an sanya shi a waje da kabad na lantarki. An ba da shawarar sanya shi a saman ƙirar gidan waya don mafi kyawun tasirin tasiri. An haramta shi don barin erenna da ba'a tantance shi ba ko sanya shi a cikin majalisar lantarki, as this may result in the signal being unusable.
4. Daga bisani, kunna ikon ikon hanjin hannu, and you can operate the machine remotely using the handwheel.

6.2 Rep reply shigarwa girma

6.3 Mai karɓar zane-zanen zane

7. Umarnin aikin samfurin
1. Iko a kan injin da mai karba. Mai ba da izinin mai ba da izini. Shigar da baturin a cikin mara waya mara waya mara amfani, amintaccen murfin baturin, da
Kunna ikon kashe wutar lantarki na lantarki mara waya ta lantarki. The handwheel’s battery level indicator light is on.
2. Select da haduwa: Latsa ka riƙe maɓallin saiti, Yana kunna Canjin AXIS, and select the axis you want to operate.
3. Zaɓi Gwargwadon: Latsa ka riƙe maɓallin saiti, kunna mahimmancin canjin,and select the desired magnification level.
4. Moving Axis: Latsa ka riƙe maɓallin saiti, Zaɓi Canjin AXIS, Zaɓi Saukar da Gwargwadon, sannan kuma juya mai rubutun bugun jini. Juya agogo don motsa
positive axis and counterclockwise to move the negative axis.
5. Latsa ka riƙe kowane maɓallin al'ada, da kuma m button io fitarwa na mai karɓa zai kunna. Saki maballin, and the output will be turned off.
6. Latsa maɓallin dakatarwar gaggawa, da m gaggawa daina Io fitarwa na mai karba za'a cire shi, Za a kashe aikin handwheel,saki maɓallin dakatarwar gaggawa, da gaggawa dakatar da io fitarwa za a rufe, and the handwheel function will be restored.
7. Idan ba a sarrafa hanji na tsawon lokaci ba, Zai shiga yanayin barci ta atomatik don rage yawan wutar lantarki. Lokacin da aka sake amfani da shi, the handwheel can be activated by pressing the enable button.
8. Idan ba'a yi amfani da hannun jari ba na dogon lokaci, An ba da shawarar canza hannun shaft zuwa gaban matsayin, Kashe ikon hanji, and extend the battery life.

8. Bayanin samfurin samfurin

① :ZTWGP tana wakiltar salon bayyanar
②：Pullse fitarwa fitarwa sigogi:
01: Yana nuna cewa siginar fitarwa na bugun jini shine, B; Bugun jini 5v; pulse quantity 100PPR.
02：Nuna cewa siginar fitarwa na bugun jini sune kuma b; Pulse dutsen hayaƙi 12v; pulse quantity 100PPR.
03：Nuna cewa siginar fitarwa na bugun jini sune, B, A -, B -; Bugun jini 5v; pulse quantity 100PPR.
04：Yana nuna ƙarancin fitarwa na NPN Circuit, Tare da alamun fitarwa na bugun jini na A da B;The number of pulses is 100PPR.
05：Yana nuna babban matakin fitowar PNP, Tare da alamun fitarwa na bugun jini na A da B; The number of pulses is 100PPR.
③：Wakiltar adadin zaɓin zaɓi na AXIS, 2 wakilta 2 axes.
④：Wakiltar nau'in saitin canjin AXIS, A wakiltar siginar fitarwa ta ma'ana, and B represents encoded output signal.
⑤：Yana wakiltar nau'in siginar sauyawa, A wakiltar siginar fitarwa ta ma'ana, and B represents encoded output signal.
⑥：Yana wakiltar adadin maballin al'ada, 2 wakilta 2 custom buttons.
⑦：Yana wakiltar wutar lantarki don tsarin aikin hannu, da 05 represents 5V power supply.
⑧：L yana wakiltar shafin hagu (mai riƙe da knife), kuma r yana wakiltar ginshiƙan madaidaiciya (mai kishin wuka).

9.Magani ga kayan aikin kayan aiki

10. Kiyaye kaya

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Da fatan za a matsa lamba, shimfiɗa, bumping, riƙaƙa. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Idan ba'a yi amfani da shi ba, Da fatan za a adana hannayen hannu a cikin tsabta mai tsabta. A lokacin ajiya da sufuri, attention should be paid to moisture and shock resistance.

11. Bayanin lafiya

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Idan ana buƙatar gyara, Da fatan za a tuntuɓi masana'anta. Idan lalacewa ta hanyar gyara kai, Mai masana'anta ba zai samar da garanti ba

]]> Fanuc sadaukar da igiyar ruwa na lantarki https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Yiwu 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Gabatarwar Samfurin

Ana amfani da hanjin lantarki mara waya don jagora na hannu, sauya, kayan aiki jeri,da sauran ayyukan akan kayan aikin CNC. Wannan samfurin yana ɗaukar fasaha mara waya mara igiyar waya, Cire haɗin waya na gargajiya na gargajiya, Rage kasawar kayan da ke haifar da igiyoyi, kawar da rashin nasarar kebul na kebul jan kai, kuma yin aiki mafi dacewa. Wannan samfurin handwheel handwheel ne mai sadaukarwa don tsarin fans. An nuna abubuwan da ke haifar da tsarin fans a cikin ainihin-lokaci a allon hannu ta hanyar bayanan IO-Haɗin IO-Haɗin, da zaɓin axis,daraja, da kuma siginar button ɗin an haɗa kai tsaye da tsarin ta hanyar tsarin haɗin IO-Haɗin, reducing wiring.

2. Sifofin samfur
1. Kwarewar 433mhz mara waya mara waya mara waya, nesa mara waya ta aiki 40 ma'aurata;
2. Yi amfani da aikinta na atomatik ta atomatik, yi amfani 32 Saitunan maryan mara waya mara nisa a lokaci guda ba tare da shafar juna ba;
3. Tallafawa maɓallin dakatarwar gaggawa, Canja fitowar Siplic, An haɗa shi da tsarin ta hanyar io wiring;
4. Goya baya 4 Button Buttons, Canja siginar IO, siginar fitarwa zuwa tsarin ta hanyar IO-Haɗin Conccol;
5. Goyi bayan maɓallin motsi na sauri + da kuma maballin -, Latsa ka riƙe maɓallin don maye gurbin hanji don matsawa injin;
6. Goyi bayan Gudanar da 6-Axis, Canja siginar IO, siginar fitarwa zuwa tsarin ta hanyar IO-Haɗin Conccol;
7. Tallafi 1x,10x, 100X iko . Tallafawa Siyarwa L0, da kuma fitowar sigogi zuwa tsarin ta hanyar IO-Haɗin shiga;
8. Goyon bayan kunna aikin, Haɗa zuwa tsarin ta hanyar Wiring, da kuma mashigayi mai sarrafawa a lokaci guda;
9. Tallafawa Ecreder Ecorder, 100 Futuka / da'ira, Samun dama ga tsarin MPG Magaji ta hanyar fitar da siginar Ab Ilon;

3.Bayanai na Samfuran

4.Sifofin samfur

Bayanin kula:
①eledomy daina:
Latsa maɓallin dakatarwar gaggawa, An cire abubuwan gaggawa biyu na io akan mai karɓa a kan mai karɓa, Kuma duk ayyukan handwheel ba su da inganci, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

Nuni ②screen nuni:

Buttons Buttons:
4 Button Buttons, Kowane makullin yayi daidai da batun fitarwa na IO akan mai karɓar, An haɗa shi da tsarin ta hanyar Iolink. Kullum, the ~ button is set as a high-speed button.
Canjin Zabi na Ocaxis:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
Buttcan Buttons:
Latsa maɓallin gajerar hanya "+" don matsar da injin gaba, kuma latsa maɓallin gajere "-" don matsawa injin mara kyau. This can replace turning the hand wheel to move the machine.
Maballin maballin:
Latsa ka riƙe kowane ɗayan maɓallin Buttons a ɓangarorin biyu kuma girgiza ƙafar bugun jini don yin tasiri. Kuma rukuni biyu na ba da damar fitowar IO akan mai karɓar. Release the enable button and the enable IO output is disconnected.
⑦atio sauyawa:
Switching the magnification switch can switch the magnification of handwheel control.
Zangwacin ⑧pepse:
Latsa ka riƙe maɓallin Mai kunna kuma girgiza mai rubutun bugun jini don aika bugun jini
signal to control the movement of the machine axis.
Canjin canji:
Handwheel power button.

5.Kayan haɗi na samfur

6.Jagorar Shigarwa

6.1 Matakai na shigarwa

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Koma zuwa mafi karyar da aka maido da shi, Kwatanta shi da kayan aikin ka, kuma haɗa
the equipment to the receiver via cables.
3. Bayan mai karbar an gyara, eriyar da aka sanya tare da mai karbar dole ne a haɗa shi,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
An ba da shawarar sanya shi a saman ƙirar gidan waya don mafi kyawun tasirin tasiri. Shi
an haramta shi don barin erenna da ba'a tantance ko sanya eriyar a cikin majalisar lantarki ba,
which may cause the signal to be unusable.
4.Daga bisani, Kunna canjin wutar lantarki kuma zaka iya sarrafa injin ta
handwheel remote control.

6.2 Rep reply shigarwa girma

6.3 Mai karɓar zane-zanen zane

7. Kiyayewa da kulawa

1. Da fatan za a yi amfani da shi a cikin yanayin bushewa tare da zazzabi na al'ada da matsi don tsawaita
Rayuwar Ma'aikata;
2. Da fatan za a guji amfani da shi a cikin mahalli marasa ruwa kamar ruwan sama da kumfa don mika
rayuwar sabis;
3. Da fatan za a ci gaba da bayyanar hannun jari mai tsabta don tsawaita rayuwar sabis;
4. Da fatan za a matsa lamba, shimfiɗa, bumping, riƙaƙa. Don hana lalacewar sassan daidai
A cikin hannun hannu ko haifar da kuskuren daidaito;
5. Idan ba'a yi amfani da shi ba, Da fatan za a adana hannayen hannu a cikin tsabta mai tsabta;
6. Pay attention to moisture and shock during storage and transportation.

8. Bayanin Tsaro

1. Da fatan za a karanta umarnin a hankali kafin amfani. An haramta kwararru daga
operating.
2. Da fatan za a sauya baturin a cikin lokaci lokacin da baturin ya yi ƙasa don guje wa kurakurai da ke haifar da
insufficient power causing the handwheel to be unable to operate.
3. Idan ana buƙatar gyara, Da fatan za a tuntuɓi masana'anta. Idan lalacewa ta hanyar gyara kai,
the manufacturer will not provide warranty.

]]> Siemens wanda aka sadaukar da Wireless na lantarki na lantarki xwgp-ets https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Yiwu 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Introduction of remote control

a.Product Composition
Siemens real-time coordinate display wireless electronic handwheel consists of two parts: sojan lantarki na lantarki + receiver;

b.Characteristics

*Tallafawa Siemens Plc: S7-200 / -300 / -1200；Tallafa ainihin lokacin aiki na Siemens tsarin dabi'u na Siemens；
*Nesa ba mai waya ba 40 ma'aurata, automatic frequency hopping technology, can use 32 sets of equipment at the same time;
*The electronic handwheel is powered by 2 AA batteries and can be used for more than 30 kwanaki;
*The receiver is equipped with an external antenna to enhance the signal and is easy to install;
*Electronic handwheel support: Daya 100ppr Eccoder 、Sau 6-sau 6 na sauyawa 、 Daya Daya Daya;
*Electronic handwheel supports 6 Button Buttons, corresponding to Siemens PLC address, wanda za'a iya tsara shi kyauta;

*6 Button Buttons na iya sarrafawa 6 Sauyawa;
*The display screen displays the PLC corresponding register coordinate value in real time, and supports 6-axis display of real-time coordinates.

2.Application field

Programmable CNC remote control is widely used in various CNC fields such as laser engraving system, CNC Milling inji, Cibiyar CNC, gantry machine tool, da sauransu

3. Introduction to the working principle

1）Electronic handwheel is connected to PLC via Ethernet receiver

a.The handwheel transmits the key data wirelessly to the receiver, and the receiver writes the keys through the network cable PLC system DB area; the receiver reads the data to be displayed from the designated DB area, and then returns the data to the handwheel display screen. The user can customize the base address of reading and writing DB area on the handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. The receiver supports Siemens S7 protocol. Applies to PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

In the server mode, the user configures the PLC read and write address through the WGP-ETS configuration software;Use the PLC connection configuration tool to configure the receiver into client mode. After configuration, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Specific application

Specific application of handwheel receiver and Siemens PLC S7-200:

a. The button on the handwheel corresponds to the value of the BOOL area set by the user in the PLC. If the button of the handwheel is pressed, the corresponding BOOL area is true, and when it is released, it is false, and the base address of the BOOL area can be set through the handwheel;

b. The handwheel can read the value of the DB area in the PLC. One axis has 4 bytes of display data, da 6 axes have a total of 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Appearance introduction

5.Receiver terminal definition and coding table

6.Appearance size

 

 

]]>