1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 ma'aurata.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Zaɓin Axis, daraja, and other information.
3. Tallafawa maɓallin dakatarwar gaggawa, Canja fitowar Siplic, and the hand wheel shutdown emergency stop is still valid.
4. Goyi bayan 6 Button Buttons, switch IO signals, and can output signals to the system through IO wiring or communication.
Wurin Koyar da Kayan Kayan Haske
Siffantarwa
1. Gabatarwar Samfurin
Electronic handwheel is used for manual guidance, sauya, kayan aiki jeri, da sauran ayyukan akan kayan aikin CNC. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, daraja, buttons, andother signals through communication.
2.Fasalolin kayan aiki
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 ma'aurata.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Zaɓin Axis, daraja, and other information.
3. Tallafawa maɓallin dakatarwar gaggawa, Canja fitowar Siplic, and the hand wheel shutdown emergency stop is still valid.
4. Goyi bayan 6 Button Buttons, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Goyi bayan 6 ko 8 Axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Goyi bayan 3 ko 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Tallafawa Ecreder Ecorder, 100 Putses / Kunna, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. Bayanai na Samfuran
| Handwheel working power supply voltage | DC24V/1A |
| Mai karbar wutar lantarki | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10m |
| Receiver end cable length | 1m |
| Receiver end network cable length | 3m |
| Operating temperature | -25℃<X<55℃ |
| Anti-fall height | 1m |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.Gabatarwar aikin Samfurin
Wasiƙa:
Emergency stop button:
Latsa maɓallin dakatarwar gaggawa, An dakatar da tsarin gaggawa biyu a kan mai karbar shi a kan mai karbar za'a cire shi, kuma duk ayyuka na hannu zai zama mara amfani.
After releasing the emergency stop, Fitar da gaggawa ta dakatar da fitarwa a kan mai karɓar, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Button Buttons, Kowace mai dacewa da batun fitarwa na IO akan mai karɓa, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Latsa ka riƙe maɓallin saiti, Shake The Passse Eckoder, Emit siginar bugun jini, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. Samfurin kayan Samfurin samfurin
6. Jagorar Shigarwa
6.1 Matakai na shigarwa
6.1 Matakai na shigarwa
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Koma zuwa zane mai karbar kayan mu kuma ka kwatanta shi da kayan aikin ka. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 Rep reply shigarwa girma
6.3 Installation dimensions of aviation plugs
6.4 Mai karɓar zane-zanen zane
7.Umarnin aikin samfurin
7.Umarnin aikin samfurin
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Zaɓi Gwargwadon: Switch the magnification switch and select the magnification level you need.
7. Moving Axis: Latsa ka riƙe maɓallin saiti, Zaɓi Canjin AXIS, Zaɓi Saukar da Gwargwadon, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Latsa maɓallin dakatarwar gaggawa, da m gaggawa daina Io fitarwa na mai karba za'a cire shi, Za a kashe aikin handwheel, saki maɓallin dakatarwar gaggawa, da gaggawa dakatar da io fitarwa za a rufe, Kuma za a dawo da aikin handwheel.
8.Bayanin samfurin samfurin
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : yana wakiltar adadin zaɓin zaɓi na AXIS, represents axes, and represents
m.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, da b suna wakiltar siginar fitarwa.
9.Product trouble shooting
10.Goyon baya
1. Da fatan za a yi amfani da shi a cikin yanayin bushewa a zazzabi a ɗakin da matsi don tsawaita rayuwarta.
2. Da fatan za a guji amfani da yanayin da mahaukaci kamar ruwan sama da kumfa don tsawaita rayuwar sabis.
3. Da fatan za a sa bayyanar hannu mai tsabta don tsawaita rayuwarta.
4. Da fatan za a matsa lamba, shimfiɗa, bumping, riƙaƙa. Don hana lalacewar abubuwan daidaitattun abubuwan da aka tsara a cikin hannun hannu ko daidaitattun kurakurai.
5. Idan ba'a yi amfani da shi ba, please store the handwheel in a clean and safe place.During storage and transportation, Ya kamata a biya hankali ga danshi da tsoratarwa juriya.
11. Bayanin lafiya
1. Da fatan za a karanta umarnin a hankali kafin amfani da kuma hana ba kwararru ba daga aiki.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Idan ana buƙatar gyara, Da fatan za a tuntuɓi masana'anta. Idan lalacewa ta hanyar gyara kai, Mai masana'anta ba zai samar da garanti ba
