5.Hōʻikeʻia ka hana huahana

② Enable buttons on both sides

③Button area

12 pihi

④ Axis Selection and Magnification Switch

One 9-gear axis selection switch; one 3-gear magnification switch.

⑤ Emergency Stop Switch

Remote control emergency stop switch.

⑥ Display Screen Area

It can display coordinates, status and other information.

⑦ Electronic Pulse Encoder

One electronic pulse encoder with 100 pulses per revolution.

⑧ Type-C Charging Port

It is used for connection between the charger and the remote control.

The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key

6. Product Accessories Diagram

7. Receiver and Wiring Ports

8. Configure network access

9. Test Instructions

1.Huahana hou hoʻopuka

2.Nā hiʻohiʻona huahana

E kaomi a hoʻopaʻa i ka pihi e hiki ai, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.

④ Pulse Encoder:

Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.

⑤ LCD Display Screen:

5. Product Accessories Diagram

 

6. ʻO ke alakaʻi kau inoa huahana

6.1 Nā Kūlana huahana huahana

1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.

2. E nānā i kā mākou mea hoʻokipa hoʻokipa, Hoʻohālikelike ia me kāu mau lako pūnaewele, and connect the equipment to the receiver with cables.

3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; ai ole, signal failure may occur.

4. Hope loa, turn on the remote control power switch, then you can remotely operate the machine via the remote control.

6.2 Receiver Installation Dimensions

6.3 Lawena i nā kiʻi kiʻi kiʻi kiʻi

7. Nā'ōlelo aʻoaʻo huahana

1. Ka mana ma ka mīkini a me ka mea lawe. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.

2. Select the axis : E kaomi a hoʻopaʻa i ka pihi e hiki ai, toggle the axis selection switch to select the axis to be operated.

3. Select the magnification: E kaomi a hoʻopaʻa i ka pihi e hiki ai, toggle the magnification switch to select the required magnification gear.

4. Axis movement: E kaomi a hoʻopaʻa i ka pihi e hiki ai, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.

5. E kaomi a hoʻopaʻa i kahi pihi maʻamau, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.

6. E kaomi i ke pihi STOCK FORT, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.

7. If the wireless remote control is not operated for a period of time, e komo 'akomi i ke ano hiamoe e hoemi i ka mana. It can be used normally again by pressing the enable button again.

8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life

8. ʻO ka wehewehe hoʻohālike huahana

①：UWGP stands for appearance style.

②：Pulse Output Parameters：

05: E hōʻike ana i nā kūlana kumu PNP kiʻekiʻe kiʻekiʻe, me nā hōʻailona pulse i nā hōʻailona o A a me B; The number of pulses is 100PPR.

③：Represents the axis selection switch quantity; 6 stands for 6 nā koi, 7 stands for 7 nā koi, and so on.

④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑥: Hōʻike i ka helu o nā pihi maʻamau; 3 corresponds to 6 custom buttons.

⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, a 24 stands for 24V power supply.

⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.

9. Huahana huahana

 

10. Maintenance and upkeep

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water to extend the service life.

3. Please keep the appearance of the remote control clean to extend its service life.

4. Please avoid crushing, dropping, or bumping, etc. to prevent damage to the precision components inside the remote control or accuracy errors.

5. Ināʻaʻole i hoʻohanaʻia no kahi manawa lōʻihi, please store the remote control in a clean and safe place.

6. Avoid moisture and shock during storage and transportation.

1.Huahana hou hoʻopuka

Hoʻohanaʻia ka Fanceless Collewheel i hoʻohanaʻia no ke alakaʻi manuahi, noho au e kau ana, mea hana a
nā hana'ē aʻe o nā mea hana mīkini cnc. ʻO kēia huahana ADOPTS Pūnaewele Pūnaewele Pūnaewele,
Hoʻokuʻu i ka piliʻana o ka uila uila, ʻO ka hoʻemiʻana i nā lako hana i hikiʻole e nā kaula,
Hoʻokuʻu i nā hemahema o nā hemahema o ke kāpiliʻana, NāʻAi'ailae Kāleʻa, etc., aʻoi aku ka maikaʻi
hana. Ua hoʻohana nuiʻia ia ma CNC mīkini hana mīkini e like me nā kikowaena magal, hueila
Lathes Ventical, ʻO nā mīkini hoʻihoʻi CNC GENC, a hiki ke hoʻololiʻia i nāʻano cnc
'ōnaehana ma ka mākeke, e like me nā siemens, Mitsubishi, Kūʻai, Synetec a me nā'ōnaehana CNC'ē aʻe
brands.

2.Nā hiʻohiʻona huahana

1. ADOPT 433MHZ GRAVERSE CANCE CANCEICAL OCCOUNCAL, ʻO nā wahi hana pūnaeweleʻole 80 Nā Moʻi;
2. ADPT ADPT SQATIETY HOAʻO, hoʻohana 32 nā hoʻonohonoho o nā mea kūʻai aku mamao loa ma ka
manawa like me kaʻole e hoʻopilikia i kēlā me kēia;
3. E kākoʻo i ka pihi STOPNGENCY STOP, A ma hope o ka huliʻana o ka lima lima, ke kūʻana o ka pilikia
Ua kūpono ke pihi;
4. Kākoʻo 6 nā pihi maʻamau, hoʻololi i ka leka uila;
5. Kākoʻo 6-AXIS, 7-12 Hiki ke hoʻonohonohoʻiaʻo Axis;
6. Kākoʻo i 1x,10X, 100X Ke kāohi a hiki ke kiʻekiʻe loa i 1000x;
7. Kākoʻo i ka hana o ka pihi, E wehe i nā SIMPPUL FOWPUL L0 SIALS. ke koho Axis,Maaniona
A hui pu ana.;
8. Kākoʻo kākoʻo AXIS koho a me ka hoʻonuiʻana i nā koho koho koho;
9. Kākoʻo kākoʻo, 5V-2a e hōʻike ana i ka hoʻolaha, kūkuluʻia i ka'ōlelo kiko'ī
14500/1100mAh.

3.Nā kiko'ī huahana

4.Hōʻikeʻia ka hana huahana

Nā moʻolelo：
ʻO ka pihiʻo ①empergegen：
I ka wā e hoʻopaʻaʻia ai ka pihi STOPRENCY STOCK, ʻO nā meaʻelua e hoʻopau i nā mea hou aku i loko
ua hoʻopiliʻia ka mea lawe, aʻaʻole kūpono nā hana lima lima a pau. I ka wā e ulia ai
Ua hoʻokuʻuʻia ke kāpae, Ua paniʻia ka hopena o ka ulia e pili ana i ka loaʻaʻana o ka mea lawe, a me nā lima lima a pau
Hoʻihoʻiʻia nā hana; A ma hope o ka huliʻana o ka lima lima, Ke kū nei ka pilikia pilikia
of the receiver is still valid when the emergency stop button is pressed.

②able pihi:
E kaomi i kekahi o nā pihi e hiki ai i nā pihiʻelua ma nāʻaoʻaoʻelua, a me nā huiʻelua o ka hiki iā ia
nā mea i waho e huliʻia ai ka mea hoʻokipa. E hoʻokuʻu i ka pihi E hiki ai i ka ENTPTOTO
E huliʻia ka hopena. Kahi mea hou aʻe, Ponoʻoe e kaomi a hoʻopaʻa i ka pihi e hiki mai ana ma mua
Ke hoʻololi nei i ke ala koho Axis. Hiki i kēia hana
canceled through the configuration software.
③axis koho koho (Nā Lāle mana):
E kaomi a hoʻopaʻa i ke pihi ENDBLE a hoʻololi i ke koho koho koho e hoʻololi i ka
ke neʻeʻana i ka axis i hoʻopiliʻia e ka lima lima. E hoʻololi i kēia hoʻololi mai kahi axis a
turn on the handwheel power.

④puluse:
E kaomi a hoʻopaʻa i ka pihi E hiki ai i ka pihi a lūlū i ka popo pulse e hoʻouna i kahi pulse
signal to control the movement of the machine axis.

ʻO ka hōʻailona hōʻailonaʻo ⑤Battery:
Hōʻike kaʻike lima lima lima, ʻO keʻano āpau āpau, pau nā mea āpauʻaʻole ia
huli aʻaʻohe mana, ʻO nā mea i koe mua, e hōʻike ana he haʻahaʻa loa ka mana,
please charge in time.
Nā kukui ⑥sgigl:
Ināʻo ka mālamalama hōʻailona, ʻO ia ka mea i hanaʻia ka lima lima lima aʻo ka hōʻailona
maʻamau; Inā pau ka mālamalama hōʻailona, ʻO ia ka meaʻaʻohe hana, a iʻole e hanaʻia akā
the wireless signal is not connected.

5.Nāʻikepili huahana huahana

6.ʻO ke alakaʻi kau inoa huahana

6.1 Nā Kūlana huahana huahana
1. E hoʻouka i ka mea lawe i loko o ka hale uila uila e hoʻohana ana i nā clips ma ke kua, a hoʻokomo i loko
the electrical cabinet using the screw holes at the four corners of the receiver.
2.E nānā i kā mākou mea hoʻokipa hoʻokipa, Hoʻohālikelike ia me kāu mau lako pūnaewele, a hui aku
the equipment to the receiver via cables.
3.Ma hope o ka hoʻopaʻaʻiaʻana o ka mea lawe, Pono e hoʻopiliʻia ka Antenna me ka mea hoʻokipa,
aʻo ka hope o waho o ka antena e pono e hoʻokomo a kauʻia ma waho o ke kahua uila uila. IT
ua manaʻoʻia e kau iā ia ma luna o ka piko o ka cabinet electrical no ka hopena hōʻailona maikaʻi loa. ʻo ia
pāpāʻia e haʻalele i ka Antenna i weheʻoleʻia a iʻole e kau i ka antenna i loko o ka hale kūʻai uila,
which may cause the signal to be unusable.
4. Hope loa, E huli i ka mana mana lima lima a hiki iāʻoe ke hana i ka mīkini e
handwheel remote control.

6.2 Loaʻa i nā'āpana hoʻonohonoho

6.3 Lawena i nā kiʻi kiʻi kiʻi kiʻi

7.Nā'ōlelo aʻoaʻo huahana
1. Hoʻopiliʻia ka mīkini, Hoʻopiliʻia ka mea hoʻokipa, ʻO ka mea hana e hōʻike ana
nā uila māmā, ʻO ka pahu uila uila uila uila i hoʻonohonohoʻia i ka pā, ka uhi uhi
paʻaʻia, Ua huliʻia ka uila uila uila uila uila, A me ka
ʻO ka mana mana lima;
2. E koho i ka axis cordinate: E kaomi a hoʻopaʻa i ka pihi e hiki ai, hoʻololi i ke koho axis
Koho, a koho i ka axis āu e makemake ai e hana ma luna;
3. E koho i ka hoʻonui: E kaomi a hoʻopaʻa i ka pihi e hiki ai, E hoʻololi i ka hoʻololiʻana i ka hoʻonui,
a koho i ka pae kiʻekiʻe e pono aiʻoe;
4. Ke neʻe nei i ka koi: E kaomi a hoʻopaʻa i ka pihi e hiki ai, Koho i ka huli koho koi, Koho
ke hoʻololi nei ka hoʻonui, A laila e hoʻomaka anaʻo Rantethe pulse
clockane a me nā mea maikaʻiʻole e neʻe nei;
5. E kaomi a hoʻopaʻa i kahi pihi maʻamau, a me ke kaomi o ke pihi o ka pane o ka
e huliʻia ka loaʻa. E hoʻokuʻu i ka pihi e hoʻohuli i ka hopena;
6. E kaomi i ke pihi STOCK FORT, ʻO ka mea e pili ana i ka hikiʻana i ka manawa o ka
Ua kāpaeʻia ka mea lawe, Ua pio ka hana lima lima, E hoʻokuʻu i ka wana hiki
ke kikowaena, Ua paniʻia ka hopena o ka ulia pōpilikia, a hoʻihoʻiʻia ka hana lima lima;
7. Ināʻaʻole i hanaʻia ka lima lima no kahi manawa, e komo koke ia i ka hiamoe
MODE e hōʻemi i ka hoʻohanaʻana i ka mana. I ka wā e hoʻohana hou ai, Hiki i ka lima lima
hanaʻia e ka paʻiʻana i ke pihi e hiki ai;
8. Ināʻaʻole hoʻohanaʻia ka lima lima no ka lōʻihi,Ua'ōleloʻia e hoʻololi i ka lima lima
shaft i ke kūlana, E hoʻohuli i ka mana lima lima, and extend the battery life.

8.ʻO ka wehewehe hoʻohālike huahana

① ：Hōʻikeʻo DWGP i keʻano nānā

② ：ʻO nā pā'ālua Pulse:
01: E hōʻike ana i nā hōʻailona o ka pulupulu o ka pulupulu a me b, a me ka bootse pulse he 5v; Pulse
Nui 100PR;
02: E hōʻike ana i nā hōʻailona o ka pulupulu o ka pulupulu a me b, a he 12v; Pulse
nui 25PPR;
03: E hōʻike ana i ka hōʻailona o ka pulse i kauʻia he b、A-、B-； Pulima blotoge 5v; Pulse quantity 1
00PPR;
04: Hōʻike i kahi kikowaena haʻahaʻa haʻahaʻa haʻahaʻa haʻahaʻa, me nā hōʻailona pulse i nā hōʻailona o A a me B; 'ōlelo
ʻO ka helu o nā pulses he 100prr;05: E hōʻike ana i nā kūlana kumu PNP kiʻekiʻe kiʻekiʻe, ʻO nā hōʻailona hōʻailona pulse
a a a b; ʻO ka nui o ka pulse he 100prr;
③ : Hōʻike i ka helu o nā kiʻi koho koi, 6 hōʻike 6 Axis, 7 hōʻike 7 axis.
④ : Hōʻike i keʻano o keʻano o ke kau inoa koho, ʻO kahi hōʻailona helu helu helu kiko'ī,
B e hōʻike i nā hōʻailona kau inoa;

⑤ : Hōʻike i keʻano o ka hōʻailona hoʻololi,
ʻO kahi hōʻailona helu helu helu kiko'ī, B e hōʻike i nā hōʻailona kau inoa;
⑥ : Hōʻike i ka nui o nā pihi maʻamau, 6 hōʻike 6 nā pihi maʻamau;
⑦ : Hōʻike i ka hāʻawiʻana i ka mana no ka'ōnaehana lima, 05 E hōʻike i ka helu 5V mana,
a 24 represents 24V power supply.

9.Huahana huahana

10. Mālama a mālama

1. Eʻoluʻolu e hoʻohana iā ia ma kahi wahi maloʻo ma ka mahana o ka lumi a me ke kaomi e hoʻonui i kona ola lawelawe;
2. Eʻoluʻolu e hoʻohana i ka hoʻohanaʻana i nā wahi o ka poʻe maʻamau e like me ka ua a me nā wai wai e hoʻonui i ke ola lawelawe;
3. Eʻoluʻolu e mālama i keʻano o ka hoʻomaʻemaʻe lima e hoʻomaʻemaʻe i kona ola lawelawe;
4. Eʻoluʻolu e pale i ka squareing, Ho'ōʻokiʻana, pohō, etc. I mea e pale ai i ka pōʻino i nā'āpana kūpono i loko
ʻO nā hewa lima a iʻole nā ​​hewa;
5. Ināʻaʻole i hoʻohanaʻia no kahi manawa lōʻihi, Eʻoluʻolu e mālama i ka lima lima ma kahi wahi maʻemaʻe a maluhia;
6.I ka wā mālama a me ke kaʻa, attention should be paid to moisture and shock resistance.

11.Nāʻike palekana palekana

1. Eʻoluʻolu e heluhelu pono i nā'ōlelo aʻo ma mua o ka hoʻohanaʻana a pāpā i nāʻoihana no nāʻoihanaʻole mai ka hana;
2. Ke haʻahaʻa loa ka pae pākaukau, Eʻoluʻolu e uku iā ia i ka manawa e pale ai i nā hewa i kumuʻia e ka lawaʻole
ka pākaukau a me ka hikiʻole ke hana i ka lima lima;

3. Inā koiʻia ka hoʻoponopono, Eʻoluʻolu e kelepona i ka mea hana. Inā hōʻehaʻia ka pōʻino e hoʻoponopono ponoʻia, the manufacturer will not provide warranty.

1.Huahana hou hoʻopuka

ʻO ka polokalamu CNCASMABLE CNCPET CNP06B e kūpono i ka pūnaewele
ʻO ka hanaʻana i ka hana o nā'ōnaehana cnc likeʻole. Kākoʻo ia i nā mea hoʻohana
Hoʻonohonoho i ka hoʻonohonoho hoʻonohonoho a hoʻomohala i nā hana pihi e hoʻomaopopo pono ai i kahi mamao
ka mana o nā hana likeʻole ma ka'ōnaehana CNC; Kākoʻo ia i nā mea hoʻohana
hoʻonohonoho hoʻonohonoho i ka hoʻonohonohoʻana a hoʻomohala i nāʻike hōʻike e hoʻomaopopo ai i ka dinamic
Hōʻike o ke kūlana'ōnaehana; Hele mai ka mana mamao me kahi rechargeable
battery and supports Type-C interface charging.

2.Nā hiʻohiʻona huahana

1. Ke hoʻohana nei i kaʻenehana kamaʻilio pūnaewele 433mhz, ʻO ka hana uila
ʻO ka mamao 80 Nā Moʻi;
2. Ke hoʻohana nei i ka hana maʻalahi, 32 Nā hoʻonohonohoʻana o nā wahi mamao
Hiki ke hoʻohanaʻia nā controllers ma ka manawa like me kaʻole o ka hoʻopilikiaʻana i kekahi;
3. Kākoʻo 12 Nā Hoʻonohonoho hoʻokūkū maʻamau;
4. Kākoʻo 2.8-inch pale, Hōʻike i ka hōʻike hana maʻamau;
5. Kākoʻo 1 6-ʻO ka hoʻololiʻana i ka huliʻana, hiki ke hoʻonohonohoʻia;
6. Kākoʻo 1 7-Hoʻololi ka wikiwiki wikiwiki, hiki ke hoʻonohonohoʻia;
7. Kākoʻo 1 Landona Handwheel, 100 pulu / huli;
8. Kākoʻo kākoʻo; 5V-2a e hōʻike ana i ka hoʻolaha; Kālā pā
specification 18650/12580mWh battery.

3.ʻO ka hanaʻana i ka mana

4. Nā kiko'ī huahana

5.Hōʻikeʻia ka hana huahana

Nā moʻolelo：
Komowe：
Ka hoʻokele lima lima e wehe a pani

Nā pihi ②END ma nāʻaoʻaoʻelua：
Pono e hoʻopaʻaʻia ka pihi e hiki ke hana i ka chenk i ka huila o ka lima;

③CCustom Book bolt
12 Ua hoʻonohonohoʻia nā pihi ma 3x4, ʻO ka hoʻonohonoho hoʻonohonohoʻana i hoʻohanaʻia;

ʻO ke kohoʻana iā ④axis koho, Hoʻololiʻo Maynication
1 6-Ke kohoʻana i ke koho koho koho, hiki ke hanaʻia a hoʻonohonohoʻia;
1 7-ʻO ka hoʻololiʻana i ke kūlana, hiki ke hanaʻia a hoʻonohonohoʻia

⑤ hālāwai hoʻokolohua:
Hoʻopau i ka hoʻokuʻuʻana o ka lima lima;

⑥ ekūluna:
Hiki ke hōʻike i ka mana o kēia manawa, Kahu inoa, a me nā hōʻike hōʻike i hanaʻia;

⑦Eclecronic rand：
1 Landona Handwheel, 100 pulses/turn.

⑧:

Kūkuluʻia-instand, ua hoʻopiʻiʻia e hoʻohana ana i keʻano-c Charger, Ke nānā nei i ka voltage 5v,
i kēia manawa 1a-2a; ʻO ka wā hōʻike 7 Nā hola hola;

6.Nāʻikepili huahana huahana

7.ʻO ke alakaʻi kau inoa huahana

1. E hoʻokomo i ka USB Finder i loko o ka kamepiula, E maʻalahi koke ka kamepiula
E hoʻomaopopo a hoʻokomo i ka mea hoʻokele USB i ka USB Pūnaewele me kaʻole o ka hoʻonohonohoʻana;
2. Hoʻokomo i ka pale mamao i loko o ka hale waihona. Ma hope o ka hoʻopiʻi pihaʻana o ka pā, huli
Ma ka mana o ka mana, huli i ka mana mamao, a hōʻike ka hōʻike i ka maʻamau, Nā
ʻo keʻano he pōmaikaʻi ka mana;
3. Ma hope o ka mālamaʻana, Hiki iāʻoe ke hana i kahi hana pihi. Hiki i ka mea mamao mamao
kākoʻo i ke pihi DILL i ka hana like ma ka manawa like. Ke kaomiʻoe i kekahi pihi, He Black
Eʻikeʻiaʻo Square ma hope o ka hōʻailona ma ka mana mamao, e hōʻike ana i ka pihi
is valid.

8.Nā'ōlelo aʻoaʻo huahana
Ma mua o ka hoʻolālāʻana i ka huahana a hoʻohana, Hiki iāʻoe ke hoʻohana i ka polokalamu demo e hāʻawi mākou e hōʻike
nā pihi a me nā hōʻike o ka kāohi mamao, a iʻole e hoʻohana i ka demo ma keʻano he papa kuhikuhi no ka
Hoʻonohonoho ManaʻoʻOku;
Ma mua o ka hoʻohanaʻana i ka polokalamu demo, Eʻoluʻolu e hoʻopili i ka USB Finder i loko o ka kamepiula, hana
maopopo i ka mana o ka mea lawe mamao, huli i ka huli mana, a laila hoʻohana ia;
I ka wā e hoʻopiliʻia ai kekahi pihi ma ka mana mamao, E hōʻike mai ka polokalamu hōʻike hōʻike hōʻike
ʻO ka waiwai nui e pili ana. Ma hope o ka hoʻokuʻuʻana iā ia, Ua nalowale ka hōʻikeʻana o ka manaʻo koʻikoʻi, e hōʻike ana i kēlā
the button upload is normal.

9.Huahana huahana

10. Mālama a mālama

1. Eʻoluʻolu e hoʻohana iā ia ma kahi maloʻo maloʻo me ka wela maʻamau a me ke kaomi e hoʻonui ai
ke ola lawelawe;
2. Mai hoʻohana i nā mea koʻikoʻi e hoʻopā ai i ka wahi kī e hoʻonui ai i ke ola lawelawe o ke kī;
3. Eʻoluʻolu e mālama i ka wahi nui e hoʻomaʻemaʻe i ka lole kī;
4. Hōʻalo i ka pīpī a hāʻule i ka hōʻehaʻana i ka hōʻino i ka hoʻokele mamao;
5. Ināʻaʻole i hoʻohanaʻia no kahi manawa lōʻihi, E wehe i ka pākaukau a mālama i ka mālama mamao a
ʻO ka pālolo ma kahi maʻemaʻe a palekana;
6. Pay attention to moisture-proof during storage and transportation.

11.Nāʻike palekana palekana

1. Eʻoluʻolu e heluhelu i nā'ōlelo aʻo ma mua o ka hoʻohanaʻana. ʻAʻole pāpāʻia nā limahana
from operating.
2. Eʻoluʻolu e hoʻohana i ka charger kumu a iʻole he mea kūʻai aku i hanaʻia e ka mea hana maʻamau me
the same specifications.
3. Eʻoluʻolu e uku i ka manawa e pale ai i ka hana hewa ma muli o ka lawaʻole o ka mana
the remote control to be unresponsive.
4. Inā koiʻia ka hoʻoponopono, Eʻoluʻolu e kelepona i ka mea hana. Inā hōʻehaʻia ka pōʻino
ka hoʻoponopono houʻana, the manufacturer will not provide warranty.

1.Huahana hou hoʻopuka

ʻO ka polokalamu CNCATSPAS CNCATSMALS CNDAT i kūpono kūpono iā PHB10 no ka pūnaeweleʻole
ʻO ka hanaʻana i ka hana o nā'ōnaehana cnc likeʻole. Kākoʻo ia i ka mea hoʻohana-wehewehe
Hoʻolālā e hoʻomohala i nā hana pā, a maopopo i ka mana mamao o nāʻano likeʻole
nā hana ma ka'ōnaehana CNC; Kākoʻo ia i ka hoʻonohonohoʻana i hoʻohanaʻia
I alakaʻi i nā kukui e hoʻomālamalama a huli aku, a maopopo i ka hōʻikeʻana i ke kūlana o ke kūlana'ōnaehana;
E hele mai ana ka mana mamao me kahi pākeke rechargeable a kākoʻo i keʻano-c
interface charging.

2.Nā hiʻohiʻona huahana

1. Ke hoʻohana nei i kaʻenehana kamaʻilio pūnaewele 433mhz, ʻO ka hana uila
ʻO ka mamao 80 Nā Moʻi;
2.Ke hoʻohana nei i ka hana maʻalahi, 32 Nā hoʻonohonohoʻana o nā wahi mamao
Hiki ke hoʻohanaʻia nā controllers ma ka manawa like me kaʻole o ka hoʻopilikiaʻana i kekahi;
3.Kākoʻo 32 Nā Hoʻonohonoho hoʻokūkū maʻamau;
4.Kākoʻo 9 Hōʻike Hōʻailona Hoʻolaha Kūlana Kūʻai;
5.Kākoʻo i ka pae'āina wai;
6.Kākoʻo kākoʻo-C Interface Charging; 5V-2a e hōʻike ana i ka hoʻolaha;
1100 Mah ka nui o ka pā uila, me ka hana hiamoe hiamoe; maopopo
ʻO ka mana haʻahaʻa haʻahaʻa lōʻihi;
7.Support real-time display of power.

3.ʻO ka hanaʻana i ka mana

4. Nā kiko'ī huahana

5.Hōʻikeʻia ka hana huahana

Nā moʻolelo：
Hōʻike Manaʻo Pū Manaʻo ①BATITY：
Kukui ma hope o ka mana ma luna, huli ma hope o ka mana;
Inā hoʻokahi wale nō ke aniani o ka pā uila a mālama i ka flashing, ʻO ia ka manaʻo
He haʻahaʻa loa ka pā. Eʻoluʻolu e hoʻololi i ka pākaukau;

Inā he mau kukui a nā kukui uila a me nā kukuiʻulaʻula'ē aʻe a iʻole
paʻa, ʻO ia ka mea i haʻahaʻa loa ka pā. Eʻoluʻolu e hoʻololi i ka pākaukau;
Ināʻaʻole e loli a hele paha ka hōʻailona o ka pā, aʻaʻole hiki i ka mea hana
hoʻomaka ma ke kaomiʻana a hoʻopaʻa i ka pihi mana, eʻoluʻolu e hoʻololi i ka pākaukau;

②button wahi：32 Ua hoʻonohonohoʻia nā pihi ma 4x8, ʻO ka hoʻonohonoho hoʻonohonohoʻana i hoʻohanaʻia;

③STATUSUS：
Camuc: ʻO ka pihi hōʻailona hōʻailona kukui, nā kukui i ka wā e hoʻopaʻaʻia ai ke pihi a hele aku
i waho ke hoʻokuʻuʻia ka pihi; ʻO nā kukui'ē aʻe he mau hōʻike maʻamau;

Komowe：
ʻO ka lōʻihi 3 kekona e huli ai, ʻO ka lōʻihi 3 kekona e huli;
⑤：
E hoʻohana i keʻano-c Charger e mālama ai, Ke nānā nei i ka voltage 5v, i kēia manawa 1a-2a; Kau palapala
wa 3-5 Nā hola hola;

Ke kau ana, ʻO ka mīkini e hōʻike ana ka mana, e hōʻike ana i keʻano. I ka wa
kau loa, the power indicator will show full bar without flashing.

6.Nāʻikepili huahana huahana

7.ʻO ke alakaʻi kau inoa huahana

1 . ʻO wauʻo Nsert i ka mea e loaʻa ai ka USB i ka kamepiula, E maʻalahi koke ka kamepiula
hoʻomaopopo a hoʻokomo i ka mea hoʻokele pūnaewele USB me ka manualʻole
2. Hoʻokomo i ka pale mamao i loko o ka hale waihona. Ma hope o ka hoʻopiʻi pihaʻana o ka pā, pēlo
a hoʻopaʻa i ka pihi mana no 3 kekona. E huli a huli ka luna mamao a me ka mana
E hoʻomālamalamaʻia ka hōʻailona, indicating that the power-on is successful.
3. Ma hope o ka mālamaʻana, Hiki iāʻoe ke hana i kahi hana pihi. Ka mana mamao
hiki ke kākoʻo i ka hana pākuhi dual ma ka manawa like. Ke kaomiʻoe i kekahi pihi, 'ōlelo
E hoʻomālamalamaʻia ke kukui uila ma luna o ka Hale mamao, indicating that this button is valid.

8.Nā'ōlelo aʻoaʻo huahana
Ma mua o ka hoʻolālāʻana i ka huahana a hoʻohana, Hiki iāʻoe ke hoʻohana i ka polokalamu demo a mākou e hāʻawi ai
E ho'āʻo i nā pihi ma ka pale mamao a me ke kukui i alakaʻiʻia ma ka mana mamao. Hiki iā ʻoe
also use the demo as a reference routine for future programming development.
Ma mua o ka hoʻohanaʻana i ka polokalamu demo, Eʻoluʻolu e hoʻopili i ka USB Finder i loko o ka kamepiula,
E hōʻoia pono i ka mana o ka mea lawe mamao, E kaomi a hoʻopaʻa i ka pihi POWER i T
nuan ia, a laila hoʻohana ia;
I ka wā e hoʻopiliʻia ai kekahi pihi ma ka mana mamao, E hōʻike ka hōʻike hōʻike hōʻike hōʻike
ʻO ka waiwai nui o ke kī. Ma hope o ka hoʻokuʻuʻana iā ia, Ua nalowale ka hōʻikeʻana o ka manaʻo koʻikoʻi,
e hōʻike ana he maʻamau ka hoʻoukaʻana;
Hiki iāʻoe ke koho i ka helu kukui i alakaʻiʻia ma ka Demo Proford Demo, KA ClaREVA,
aʻo ka helu uila e pili ana i ka helu kukui ma ka palena mamao e hoʻomālamalamaʻia, e hōʻike ana i ka
LED light is downloading normally.

9.Huahana huahana

10. Mālama a mālama

1. Eʻoluʻolu e hoʻohana iā ia ma kahi maloʻo maloʻo me ka wela maʻamau a me ke kaomi e hoʻonui ai
ke ola lawelawe;
2. Mai hoʻohana i nā mea koʻikoʻi e hoʻopā ai i ka wahi kī e hoʻonui ai i ke ola lawelawe o ke kī;
3. Eʻoluʻolu e mālama i ka wahi nui e hoʻomaʻemaʻe i ka lole kī;
4. Hōʻalo i ka pīpī a hāʻule i ka hōʻehaʻana i ka hōʻino i ka hoʻokele mamao;
5. Ināʻaʻole i hoʻohanaʻia no kahi manawa lōʻihi, Eʻoluʻolu e wehe i ka pākaukau a mālama i ka mana mamao
a me ka pā uila ma kahi maʻemaʻe a me kahi palekana;
6. Pay attention to moisture-proof during storage and transportation.

11.Nāʻike palekana palekana

1. Eʻoluʻolu e heluhelu i nā'ōlelo aʻo ma mua o ka hoʻohanaʻana. ʻAʻole pāpāʻia nā limahana
operating.
2. Eʻoluʻolu e hoʻohana i ka Charger kumu a iʻole kahi mea kūʻai aku i hanaʻia e ka mea hana maʻamau me ka
same specifications.
3. Eʻoluʻolu e uku i ka manawa e paleʻole ai i ka hana hewa ma muli o ka lawaʻole o ka mana e hoʻokau ai i ka
remote control to be unresponsive.
4. Inā koiʻia ka hoʻoponopono, Eʻoluʻolu e kelepona i ka mea hana. Inā hōʻinoʻia ka pōʻino i ka hoʻoponopono pono'ī,
the manufacturer will not provide warranty.