ʻO ka noi kiko'ī no nā siemens – Kalekena Nenehana WIXHC https://www.wixhc.cn Alakaʻi ʻOihana Wed, 05 Nov 2025 06:21:59 +0000 haw hourly 1 https://wordpress.org/?v=6.8.6 Wild electronic modwheel form form https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Huahana hou hoʻopuka

Hoʻohana ʻia ka huila uila no ke alakaʻi lima, noho au e kau ana, alignment mea hana, a me nā hana ʻē aʻe ma nā mea hana mīkini CNC. ʻO kēia hiʻohiʻona o ka huila uila ʻo Siemens hōʻike maoli ʻia ka huila uila uila. Hoʻopili ʻia ka huila lima i ka interface X130 o ka ʻōnaehana Siemens ma o ke kelepona pūnaewele, a heluhelu ʻia a hōʻike ʻia nā hoʻonohonoho ʻōnaehana ma ka pale LCD o ka huila lima ma o ke kamaʻilio protocol S7. Hiki i ka huila lima ke hoʻomalu i ke koho axis system, Maginfication, pihi, andother signals through communication.
2.Nā hiʻohiʻona huahana
1. E hoʻohana i kahi kikowaena 6-core a Aviation Plug e pili ana i ka pilina, me kahi lōʻihi o ka lima lima 10 meters.
2. Hiki i ka papa hana lima lima ke hōʻike i nā hoʻonohonoho hoʻonohonoho limahana hana, Nā hui mechanical,hualoaʻa, ke koho Axis, Maginfication, and other information.
3. E kākoʻo i ka pihi STOPNGENCY STOP, hoʻololi i ka leka uila, and the hand wheel shutdown emergency stop is still valid.
4. Kākoʻo 6 nā pihi maʻamau, Hoʻololi iā i nā hōʻailona, and can output signals to the system through IO wiring or communication.
5. Kākoʻo 6 Oole 8 Hoʻohanaʻia Axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Kākoʻo 3 Oole 4 pae o ka mana hoonui, with switch IO signals that can be output to the system through IO wiring or communication.
7. Kākoʻo pulse encoder, 100 pulu / huli, can output signals to the system through AB pulse wiring.
8. Kākoʻo iā Siemens S7 protocol a me Siemens 828D, 840DSL, ONE and other model systems.

 

3. Nā kiko'ī huahana
Puke uila hana lima lima DC24V/1A
ʻO ka mana hoʻolako uila DC24V/1A
Loaʻa ka loaʻa ʻana o ka hoʻouka IO DC24V
Ka lōʻihi o ke kaula hope huila lima 10m
Ka lōʻihi o ke kaula hope loa 1m
Ka lōʻihi o ka uwea pūnaewele hope loa 3m
Hana wela -25℃<X<55℃
Kiʻekiʻe kūʻē i ka hāʻule 1m
Ka Nui Piko Kuleana 6
Nā ana huahana 233*90.7*77.4（mm）

4.Hōʻikeʻia ka hana huahana

Nānā:
Pihi hooki pilikia:
E kaomi i ke pihi STOCK FORT, a e hoʻopau ʻia nā pūʻulu ʻelua o ka hoʻokuʻu pilikia IO ma ka mea hoʻokipa, and all functions of the handwheel will be invalid.
Ma hope o ka hoʻokuʻu ʻana i ka hoʻomaha pilikia, Ua paniʻia ka hopena o ka ulia e pili ana i ka loaʻaʻana o ka mea lawe, and all functions of the handwheel are restored.
② Hōʻike pale:

 

PLC: 0000 hōʻike ʻia ʻaʻole pili ke kaula pūnaewele, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 hōʻike maikaʻi i ke kākau ʻana i nā ʻikepili ʻōnaehana i ka huila lima, PLC: 0001 represents successful connection to the computer.
③ Pākuʻi maʻamau:
6 nā pihi maʻamau, pili kēlā me kēia me kahi kiko puka IO ma ka mea hoʻokipa, also connected to the system through communication.
④ Hoʻololi koho axis:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Pākuʻi hoʻā:
E kaomi a paʻa i ke pihi hiki ma nā ʻaoʻao ʻelua e hoʻā i ka pulse encoder ma ka lulu ʻana. A ʻo nā pūʻulu ʻelua ma ka mea hoʻokipa hiki iā IO ke alakaʻi, release the enable button to enable IO output to disconnect.
⑥ Hoʻololi hoʻonui:Hiki i ka hoʻololi hoʻonui ke hoʻololi i ka hoʻonui
controlled by the handwheel.
⑦ Pulse encoder:
E kaomi a hoʻopaʻa i ka pihi e hiki ai, hoʻoluliluli i ka pulse encoder, hoʻopuka i kahi hōʻailona puʻupuʻu, and control the movement of the machine axis.
⑧ Uea huila lima:

Uea hoʻokuʻi i ka huila lima a me ka mea hoʻokipa, pahu lele, used for handwheel power supply and communication.

5. ʻO kaʻikepili huahana huahana huahana

6. ʻO ke alakaʻi kau inoa huahana
6.1 Nā Kūlana huahana huahana
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. E nānā i kā mākou mea e loaʻa ai i ke kiʻi kiʻi kiʻi a hoʻohālikelike iā ia me kāu mau lako pūnaewele. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Ma hope o ka hoʻoponoponoʻana i ka mea loaʻa, e hoʻokomo i ke kumu hoʻoheheʻe mokulele ma ke kūlana wehe ʻana o ka huila lima ma ka pā, a hoʻopili i ka ʻaoʻao ʻē aʻe o ke kumu i loko o ka huila lima lima ma ka mea hoʻokipa. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Loaʻa i nā'āpana hoʻonohonoho

6.3 ʻO nā ana hoʻokomo ʻana o nā plug lele

6.4 Lawena i nā kiʻi kiʻi kiʻi kiʻi
7.Nā'ōlelo aʻoaʻo huahana

1. Ke hoʻā ʻia ka mea hoʻokipa a ʻālohilohi ke kukui hana o ka mea hoʻokipa, e hoʻohui i ka mea hoʻokipa i ke kamepiula me ke kaula pūnaewele, e hoʻonohonoho i ka helu IP paʻa o ke kamepiula, a hoʻohana i ka lako polokalamu hoʻonohonoho pūnaewele e hoʻonohonoho i nā ʻāpana pūnaewele o ka hana lima lima. No nā ʻano hoʻonohonoho kikoʻī, e kuhikuhi i ka “LXWGP-ETS Palapala Hoʻohana Uea”.

2.Ma hope o ka hoʻonohonoho ʻana o ka mea hoʻokipa, pono ka ʻōnaehana e hoʻolālā i kahi papahana PLC. E ʻoluʻolu e nānā i ka “LXWGP-ETS ʻOkoʻa Siemens Mana Hoʻoponopono Pūnaehana ʻano hoʻonohonoho” and PLC program routine materials for details.

3.Ma hope o ka hoʻopau ʻana i nā hoʻonohonoho i luna, e lawe i ka mea hoʻokipa i ka mīkini uila a hoʻokomo. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Ma hope o ka hoʻopau ʻana i nā hoʻonohonoho i luna, e lawe i ka mea hoʻokipa i ka mīkini uila a hoʻokomo. Wehe i ka uwea pūnaewele mai ka lolouila a hoʻopili iā ia i ke kikowaena X o ka ʻōnaehana. Connect the receiver power supply and pulse line.
5. E koho i ke koho axis: Switch the axis selection switch and select the axis you want to operate on.
6. E koho i ka hoʻonui: Switch the magnification switch and select the magnification level you need.
7. Ke neʻe nei i ka koi: E kaomi a hoʻopaʻa i ka pihi e hiki ai, Koho i ka huli koho koi, koho i ka hoʻololi hoʻonui, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. E kaomi a paʻa i kekahi pihi maʻamau e hoʻā i ka puka IO o ke pihi pili i ka mea hoʻokipa, and release the button to turn off the output.
9. E kaomi i ke pihi STOCK FORT, e hoʻopau ʻia ka hoʻokuʻu pilikia pili IO o ka mea hoʻokipa, e pio ka hana huila lima, hoʻokuʻu i ke pihi hoʻomaha pilikia, e pani ʻia ka puka IO hoʻomaha pilikia, and the handwheel function will be restored.
8.ʻO ka wehewehe hoʻohālike huahana

① LXWGP hōʻike i ke ʻano hiʻohiʻona uea, a me ka pilina kamaʻilio mea hoʻokipa
is an Ethernet interface.
② : Represents Siemens system specific.
③ : Hōʻike i ka helu o nā kiʻi koho koi, hōʻike i nā koi, a e hoike ana
axes.
④ : hōʻike i ke ʻano o ke koho axis a me ka hōʻailona hoʻonui, He hoike
hōʻailona hoʻopuka kiko-i-kahi, and B represents encoded output signal.

9.Hoʻopau pilikia huahana

10.Mālama
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Eʻoluʻolu e pale i ka squareing, Ho'ōʻokiʻana, pohō, etc. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ināʻaʻole i hoʻohanaʻia no kahi manawa lōʻihi, e ʻoluʻolu e mālama i ka huila lima ma kahi maʻemaʻe a palekana. I ka wā mālama a me ka lawe ʻana, attention should be paid to moisture and shock resistance.
11. Nāʻike palekana palekana

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Inā loaʻa kekahi ʻano kūpono ʻole me ka huila lima, e ʻoluʻolu e hoʻōki i ka hoʻohana koke ʻana a hoʻoponopono. Ma mua o ka hoʻoponopono pilikia, ʻAʻole ʻae ʻia ka hoʻohana hou ʻana i ka huila lima hewa e pale ai i nā pōʻino palekana i hana ʻia e nā hewa lima lima ʻike ʻole.;
3. Inā koiʻia ka hoʻoponopono, Eʻoluʻolu e kelepona i ka mea hana. Inā hōʻehaʻia ka pōʻino e hoʻoponopono ponoʻia, ʻAʻole hāʻawi ka mea hana i ka hōʻoia

 

]]> ʻO nā mea mamao aku i hoʻokaʻawaleʻia no CNC CNTC TRYIcal Lathe https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Huahana hou hoʻopuka

Hoʻohana ʻia ka mea hoʻopaʻa ʻole mamao mamao no ka CNC vertical lathes no ke alakaʻi lima, noho au e kau ana, hoʻonohonoho mea hana, a me nā hana ʻē aʻe ma nā mea mīkini paʻa CNC. ʻO kēia huahana ADOPTS Pūnaewele Pūnaewele Pūnaewele, e hoʻopau ana i ka pono no nā hoʻohui puna puna maʻamau, ʻO ka hoʻemiʻana i nā lako hana i hikiʻole e nā kaula, a me ka hoʻopau ʻana i nā hemahema o ka huki ʻana i ke kaula a me nā ʻaila hinu, ʻoi aku ka maʻalahi o ka hana. Hoʻohana nui ʻia ia i nā lathes vertical like ʻole CNC vertical lathes, nā lathe kū hoʻokahi kolamu, a me nā lathes vertical kolamu ʻelua. Hiki ke hoʻololi ʻia i nā ʻano ʻōnaehana CNC ma ka mākeke, e like me nā siemens,
Mitsubishi, Kūʻai, and Syntec.

2. Nā hiʻohiʻona huahana

1. ʻApono ʻana 433 ʻenehana kamaʻilio uila MHz, me kahi mamao o ka hana uila 40 meters.
2.Hoʻohana ʻana i ka hana hopping alapine aunoa a me ka hoʻohana ʻana 32 pūʻulu o nā mea hoʻokele mamao uea i ka manawa like, without affecting each other.
3. E kākoʻo i ka pihi STOPNGENCY STOP, switch IO signal output.
4. Kākoʻo 2 nā pihi i hoʻohanaʻia, with switch-type IO signal output.
5. Kākoʻo -2 axis control.
6. Supports 3-level magnification control.
7. Kākoʻo i ka hana pihi hiki, hiki iā ia ke hoʻopuka i nā hōʻailona IO a hoʻokele i ke koho axis, mea hoonui, A hui pu ana.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Kākoʻo i ka pulse encoder, me kahi kikoʻī o 100 pulses per revolution.
3. Nā kiko'ī huahana
Volta hana a me ke au o ka mamao uwea ole
3V/14MA
Nā kikoʻī pākahi 2 ʻO nā ʻōhua alkaline AA, size 5
ʻO ke ʻano hoʻāla uila haʻahaʻa haʻahaʻa o ka mamao uila < 2.3V
ʻO ka mana hoʻolako uila DC5V-24V/A
ʻO ka loaʻa ʻana o ka hoʻokuʻu ʻana i ka hoʻouka ʻana AC125V-1A/DC30V-2A
Hāʻawi ka mea hoʻokipa i ka laulā hoʻouka puka
AC125V-1A/DC30V-2A
Loaʻa i ka loaʻa ʻana o nā pihi hoʻouka maʻamau DC24V/50mA
Loaʻa ka hoʻouka ʻana i ke koho axis koho DC24V/50mA
Laulā hoʻouka puka hoʻonui hoʻonui DC24V/50mA
Ka mana hoʻouna o ka pahu lima lima
15dBm
Loaʻa ka ʻike ʻike -100dBm
ʻO ke alapine kamaʻilio ʻole 433MHz alapine
Ka mamao kamaʻilio ʻole Kaawale kaawale pale o 40 Nā Moʻi
Hana wela -25℃ < X < 55℃
Kūleʻa hāʻule kiʻekiʻe 1 (mluter)
Ka nui pihi maʻamau 2
4. Hōʻikeʻia ka hana huahana



Nā moʻolelo:

① Pulse encoder:
E kaomi a hoʻopaʻa i ka pihi e hiki ai, hoʻoluliluli i ka pulse encoder, hoʻopuka i kahi hōʻailona puʻupuʻu,and control the movement ofthe machine axis.
② Pihi ho'ā:
E kaomi i ke pihi hiki ma kēlā ʻaoʻao kēia ʻaoʻao, a e alakaʻi nā pūʻulu ʻelua o ka hoʻopuka IO ma ka mea hoʻokipa. E hoʻokuʻu i ke pihi hiki e wehe i ka puka IO hiki; A ma mua o ka hoʻololi ʻana i ka hoʻonui koho axis a lulu i ka huila lima,pono e hoʻopaʻa ʻia ke pihi hiki i mea e pono ai; This function can be cancelled through configuration software.

③ Nā kukui hōʻailona:
Māmā ʻaoʻao hema: mana ma ka malamalama,hoʻohana ka huila lima i ke koʻi e koho i ka OFF no ka mana, a mau kēia kukui ma hope o ka hoʻā ʻana;
kukui waena: he kukui hōʻailona e ʻā ana i ka wā e hana ana i kekahi hana o ka huila lima, a ʻaʻole e ʻā ke hana ʻole;
kukui ʻaoʻao ʻākau: Pau loa Haxt Alarm kukui, pae haʻahaʻa haʻahaʻa,ʻā a paʻa paha kēia kukui, battery needs to be replaced.

④ Pihi hoʻomaha pilikia:
E kaomi i ke pihi STOCK FORT, a e hoʻopau ʻia nā pūʻulu ʻelua o ka hoʻokuʻu pilikia IO ma ka mea hoʻokipa, and all functions of the handwheel will be invalid.

⑤ Hoʻololi hoʻonui:
E kaomi a paʻa i ke pihi hiki e hoʻololi i ka hoʻololi hoʻonui, which can switch the magnification controlled by the handwheel.

⑥ Hoʻololi koho axis (Nā Lāle mana):
E kaomi a paʻa i ke pihi hiki e hoʻololi i ka hoʻololi koho axis, hiki ke hoʻololi i ke axis neʻe i hoʻomalu ʻia e ka huila lima. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Pākuʻi maʻamau:
ʻElua pihi maʻamau, each corresponding to an IO output point on the receiver.

5. ʻO kaʻikepili huahana huahana huahana

6. ʻO ke alakaʻi kau inoa huahana
6.1 Nā Kūlana huahana huahana

1. E hoʻouka i ka mea lawe i loko o ka hale kūʻai uila ma o ka buckle ma ke kua, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. E nānā i kā mākou mea e loaʻa ai i ke kiʻi kiʻi kiʻi a hoʻohālikelike iā ia me kāu mau lako pūnaewele. Connect the equipment to the receiver via cables.
3.Ma hope o ka hoʻopaʻa pono ʻana o ka mea hoʻokipa, Pono e hoʻopiliʻia ka Antenna me ka mea hoʻokipa, a e hoʻokomo ʻia ka ʻaoʻao o waho o ka antenna ma waho o ke keʻena uila. Ua manaʻoʻia e waiho ia ma luna o ka piko o ke kaʻa uila uila no ka hopena hōʻailona maikaʻi loa. ʻAʻole ʻae ʻia ka haʻalele ʻana i ka antenna me ka ʻole a waiho ʻia i loko o ke keʻena uila, as this may result in the signal being unusable.
4. Hope loa, e hoohuli i ke kua o ka huila lima, and you can operate the machine remotely using the handwheel.

6.2 Loaʻa i nā'āpana hoʻonohonoho

6.3 Lawena i nā kiʻi kiʻi kiʻi kiʻi

7. Nā'ōlelo aʻoaʻo huahana
1. Ka mana ma ka mīkini a me ka mea lawe. ʻO ke kukui hōʻailona hana o ka mea hoʻokipa. E hoʻokomo i ka pila ma ka huila lima uila uila, hoʻopaʻa i ka uhi pākaukau, a
e ho'ā i ka hoʻololi mana o ka huila uila uila. The handwheel’s battery level indicator light is on.
2. E koho i ka axis cordinate: E kaomi a hoʻopaʻa i ka pihi e hiki ai, e hoʻololi i ka hoʻololi koho axis, and select the axis you want to operate.
3. E koho i ka hoʻonui: E kaomi a hoʻopaʻa i ka pihi e hiki ai, hoʻololi i ka hoʻololi hoʻonui,and select the desired magnification level.
4. Ke neʻe nei i ka koi: E kaomi a hoʻopaʻa i ka pihi e hiki ai, Koho i ka huli koho koi, koho i ka hoʻololi hoʻonui, a laila hoʻohuli i ka encoder pulse. E hoʻohuli i ka uaki e hoʻoneʻe i ka
positive axis and counterclockwise to move the negative axis.
5. E kaomi a hoʻopaʻa i kahi pihi maʻamau, a e hoohuliia ke pihi pili IO o ka mea loaa. E hoʻokuʻu i ke pihi, and the output will be turned off.
6. E kaomi i ke pihi STOCK FORT, e hoʻopau ʻia ka hoʻokuʻu pilikia pili IO o ka mea hoʻokipa, e pio ka hana huila lima,hoʻokuʻu i ke pihi hoʻomaha pilikia, e pani ʻia ka puka IO hoʻomaha pilikia, and the handwheel function will be restored.
7. Ināʻaʻole i hanaʻia ka lima lima no kahi manawa, e komo 'akomi i ke ano hiamoe e hoemi i ka mana. I ka wā e hoʻohana hou ai, the handwheel can be activated by pressing the enable button.
8. Ināʻaʻole hoʻohanaʻia ka lima lima no ka lōʻihi, pono e hoʻololi i ke kumu huila lima i ke kūlana OFF, E hoʻohuli i ka mana lima lima, and extend the battery life.

8. ʻO ka wehewehe hoʻohālike huahana

① :Hōʻike ʻo ZTWGP i ke ʻano hiʻohiʻona
②：ʻO nā pā'ālua Pulse:
01: E hōʻike ana ʻo ka hōʻailona puka pulse ʻo A, B; Pulima blotoge 5v; pulse quantity 100PPR.
02：E hōʻike ana i nā hōʻailona puka pulse ʻo A a me B; Pulse Volta 12V; pulse quantity 100PPR.
03：E hōʻike ana ʻo nā hōʻailona puka pulse ʻo A, B, A -, B -; Pulima blotoge 5v; pulse quantity 100PPR.
04：Hōʻike i kahi kikowaena haʻahaʻa haʻahaʻa haʻahaʻa haʻahaʻa, me nā hōʻailona pulse i nā hōʻailona o A a me B;The number of pulses is 100PPR.
05：E hōʻike ana i nā kūlana kumu PNP kiʻekiʻe kiʻekiʻe, me nā hōʻailona pulse i nā hōʻailona o A a me B; The number of pulses is 100PPR.
③：E hōʻike ana i ka helu o nā hoʻololi koho axis, 2 hōʻike 2 axes.
④：Hōʻike i ke ʻano o ka hōʻailona hoʻololi koho axis, ʻO kahi hōʻailona helu helu helu kiko'ī, and B represents encoded output signal.
⑤：Hōʻike i ke ʻano o ka hōʻailona hoʻololi hoʻonui, ʻO kahi hōʻailona helu helu helu kiko'ī, and B represents encoded output signal.
⑥：Hōʻike i ka helu o nā pihi maʻamau, 2 hōʻike 2 custom buttons.
⑦：Hōʻike i ka lako mana no ka huila lima ʻōnaehana, a 05 represents 5V power supply.
⑧：Hōʻike ʻo L i ke kolamu hema (paʻi pahi hema), a ʻo R ke kolamu ʻākau (paʻi pahi ʻākau).

9.Hoʻoponopono i nā hana ʻino o ka huahana

10. mālama huahana

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Eʻoluʻolu e pale i ka squareing, Ho'ōʻokiʻana, pohō, etc. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ināʻaʻole i hoʻohanaʻia no kahi manawa lōʻihi, Eʻoluʻolu e mālama i ka lima lima ma kahi wahi maʻemaʻe a maluhia. I ka wā mālama a me ke kaʻa, attention should be paid to moisture and shock resistance.

11. Nāʻike palekana palekana

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Inā koiʻia ka hoʻoponopono, Eʻoluʻolu e kelepona i ka mea hana. Inā hōʻehaʻia ka pōʻino e hoʻoponopono ponoʻia, ʻAʻole hāʻawi ka mea hana i ka hōʻoia

]]> Funuc dedicted windless medwheel https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Mei 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Huahana hou hoʻopuka

Hoʻohanaʻia ka Fanceless Collewheel i hoʻohanaʻia no ke alakaʻi manuahi, noho au e kau ana, alignment mea hana,a me nā hana ʻē aʻe ma nā mea hana mīkini CNC. ʻO kēia huahana ADOPTS Pūnaewele Pūnaewele Pūnaewele, Hoʻokuʻu i ka piliʻana o ka uila uila, ʻO ka hoʻemiʻana i nā lako hana i hikiʻole e nā kaula, ka hoʻopau ʻana i nā hemahema o ka huki ʻana i ke kaula a me nā ʻaila hinu, a hana hou i ka hana hou. ʻO kēia hiʻohiʻona o ka uila uila uila he mea hoʻolaʻa lima no ka ʻōnaehana Fanuc. Hōʻike ʻia nā ʻōnaehana ʻōnaehana Fanuc i ka manawa maoli ma ka pale lima lima ma o ka protocol IO-LINK, a me ke koho axis,Maginfication, a pili pono nā hōʻailona pihi i ka ʻōnaehana ma o ka protocol IO-LINK, reducing wiring.

2. Nā hiʻohiʻona huahana
1. ADOPT 433MHZ GRAVERSE CANCE CANCEICAL OCCOUNCAL, ʻO nā wahi hana pūnaeweleʻole 40 Nā Moʻi;
2. ADPT ADPT SQATIETY HOAʻO, hoʻohana 32 nā pūʻulu o nā mea hoʻokele mamao ʻole i ka manawa like me ka hoʻopili ʻole ʻana i kekahi i kekahi;
3. E kākoʻo i ka pihi STOPNGENCY STOP, hoʻololi i ka leka uila, pili i ka ʻōnaehana ma o IO wiring;
4. Kākoʻo 4 nā pihi maʻamau, RIDDOO MA KENANA, ʻO ka hōʻailona hoʻohālikelike i ka'ōnaehana ma o ka leka uila i ka leka uila;
5. Kākoʻo i ka pihi wikiwiki wikiwiki + a me ke pihi -, E kaomi a hoʻopaʻa i ke pihi e hoʻololi i ka lima lima e hoʻoneʻe i ka mīkini;
6. Kākoʻo 6-AXIS, RIDDOO MA KENANA, ʻO ka hōʻailona hoʻohālikelike i ka'ōnaehana ma o ka leka uila i ka leka uila;
7. Kākoʻo 1X,10x, 100X mana . Kākoʻo hoʻololi l0 hōʻailona, a hoʻopuka i nā hōʻailona i ka ʻōnaehana ma o ka protocol IO-LINK;
8. Kākoʻo hiki ke hana pihi, e hoʻohui i ka ʻōnaehana ma o IO wiring, a hiki i ka encoder hoʻomalu i ka manawa like;
9. Kākoʻo pulse encoder, 100 puʻupuʻu/pōʻai, e kiʻi i ka ʻōnaehana MPG handwheel interface ma ka hoʻopuka ʻana i ka hōʻailona encoding AB;

3.Nā Kūlana Huahana

4.Nā hiʻohiʻona huahana

Nā moʻolelo:
ʻO ka pihiʻo ①empergegen:
E kaomi i ke pihi STOCK FORT, ʻO nā puka IO hoʻokuʻu pilikia ʻelua ma ka mea hoʻokipa ua hemo, a ʻaʻole pono nā hana a pau o ka huila lima, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Hōʻike pale:

③ Nā pihi maʻamau:
4 nā pihi maʻamau, pili kēlā me kēia pihi i kahi kiko puka IO ma ka mea hoʻokipa, pili i ka ʻōnaehana ma o IOLINK. ʻO ka maʻamau, the ~ button is set as a high-speed button.
④Kuhi koho axis:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Piki pōkole:
E kaomi i ke pihi pōkole "+" e hoʻoneʻe i ka mīkini i mua, a kaomi i ke pihi ʻoki pōkole "-" e hoʻoneʻe i ka mīkini me ka ʻino. This can replace turning the hand wheel to move the machine.
⑥Enable pihi:
E kaomi a paʻa i kekahi o nā pihi hiki ma nā ʻaoʻao ʻelua a hoʻoluliluli i ka encoder pulse i mea e pono ai. A ʻo nā pūʻulu ʻelua o ka hoʻohana ʻana i nā huahana IO ma ka mea hoʻokipa ua hoʻāla ʻia. Release the enable button and the enable IO output is disconnected.
⑦ Pākuʻi ratio:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
E kaomi a hoʻopaʻa i ka pihi E hiki ai i ka pihi a lūlū i ka popo pulse e hoʻouna i kahi pulse
signal to control the movement of the machine axis.
⑨Kuhi mana:
Handwheel power button.

5.Nāʻikepili huahana huahana

6.ʻO ke alakaʻi kau inoa huahana

6.1 Nā Kūlana huahana huahana

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.E nānā i kā mākou mea hoʻokipa hoʻokipa, Hoʻohālikelike ia me kāu mau lako pūnaewele, a hui aku
the equipment to the receiver via cables.
3. Ma hope o ka hoʻopaʻaʻiaʻana o ka mea lawe, Pono e hoʻopiliʻia ka Antenna me ka mea hoʻokipa,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Ua manaʻoʻia e waiho ia ma luna o ka piko o ke kaʻa uila uila no ka hopena hōʻailona maikaʻi loa. IT
ʻAʻole ʻae ʻia ka haʻalele ʻole o ka antenna a i ʻole ke kau ʻana i ka antenna i loko o ke keʻena uila,
which may cause the signal to be unusable.
4.Hope loa, E huli i ka mana mana lima lima a hiki iāʻoe ke hana i ka mīkini e
handwheel remote control.

6.2 Loaʻa i nā'āpana hoʻonohonoho

6.3 Lawena i nā kiʻi kiʻi kiʻi kiʻi

7. Mālama a mālama

1. E ʻoluʻolu e hoʻohana iā ia ma kahi maloʻo me ka mahana maʻamau a me ke kaomi e hoʻonui i ka
ola lawelawe;
2. E ʻoluʻolu e hōʻole i ka hoʻohana ʻana iā ia ma nā wahi kūlohelohe e like me ka ua a me nā ʻōpū wai e hoʻonui
ke ola lawelawe;
3. E ʻoluʻolu e mālama i ke ʻano o ka huila lima e hoʻolōʻihi i ke ola lawelawe;
4. Eʻoluʻolu e pale i ka squareing, Ho'ōʻokiʻana, pohō, etc. e pale aku i ka poino i na apana pololei
i loko o ka huila lima a i ʻole ke kumu i nā hewa pololei;
5. Ināʻaʻole i hoʻohanaʻia no kahi manawa lōʻihi, Eʻoluʻolu e mālama i ka lima lima ma kahi wahi maʻemaʻe a maluhia;
6. Pay attention to moisture and shock during storage and transportation.

8. ʻIke palekana

1. Eʻoluʻolu e heluhelu i nā'ōlelo aʻo ma mua o ka hoʻohanaʻana. ʻAʻole pāpāʻia nā limahana
operating.
2. E ʻoluʻolu e hoʻololi i ka pākaukau i ka manawa haʻahaʻa loa ka pākaukau e pale aku i nā hewa i hana ʻia e
insufficient power causing the handwheel to be unable to operate.
3. Inā koiʻia ka hoʻoponopono, Eʻoluʻolu e kelepona i ka mea hana. Inā hōʻinoʻia ka pōʻino i ka hoʻoponopono pono'ī,
the manufacturer will not provide warranty.

]]> Siemens dedicated windiless canming cendoniel lindwheel xwgp-ets https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Mei 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.ʻO ka hoʻolaunaʻana o ke Kāleka Retele

A.PURPTCT COMkikoheonua
Siemens Real-Time Conderinate E hōʻike i nā leka uila uila uila e pili ana i nā'āpanaʻelua o nā'āpanaʻelua: Landona Handwheel + meak;

B.CHACTIFItyTukia

*Kākoʻo imi i ka plc: S7-200 / -300 / -1200；Kākoʻo i ka hōʻike maoli o nā hōʻike Siemens i hoʻonohonohoʻia；
*Ua weheʻia ka mamao o ka pūnaeweleʻole 40 Nā Moʻi, kaʻenehana paʻaʻana, hiki ke hoʻohana 32 nā hoʻonohonoho o nā lako i ka manawa like;
*Hoʻokomoʻia ka lima lima uila 2 Aa a aa a hiki ke hoʻohanaʻia no nā mea hou aku 30 Nā lā;
*Ua lako ka mea lawe aku me kahi antan ma waho e hoʻonui i ka hōʻailona a he maʻalahi ke hoʻonohonoho;
*Kākoʻo kākoʻo lima lima: Hoʻokahi hui 100prr 、hoʻokahi'āpana helu 6-wikiwiki 、 hoʻokahi 3-wikiwiki ka hoʻololiʻana;
*Kākoʻo i kākoʻoʻia 6 nā pihi maʻamau, e pili ana i ka siemens plc, hiki ke hoʻonohonohoʻia;

*6 Hiki i nā pihi CLElelo 6 hoʻololi i waho;
*Ke hōʻike nei ka hōʻike hōʻike hōʻike i ka helu helu PLC e pili ana i ka helu hoʻonohonohoʻana i ka waiwai i ka manawa maoli, and supports 6-axis display of real-time coordinates.

2.Kahua noi

Ua hoʻohana nuiʻia ka mana o ka CNCPABLE CNC i nā kahua CNC i like me nā'ōnaehana o Laser e like me ka'ōnaehanaʻo Laser, Cnc mill m mīkini, CNC MACTIVER CITED, Nā Kūlana Kūʻai Gantry, etc.

3. ʻO ka hoʻolahaʻana i ka hana hana hana

1) Hoʻopiliʻia ka lima uila i ka plc ma o ka mea e loaʻa ai iā Ethernet ethernet

Ua weheʻo A.thend Handwheel i kaʻikepili nui e hikiʻole ke loaʻa i ka mea i loaʻa, a kākauʻo ka mea hoʻokipa i nā kī ma o ka pūnaewele cable system system system system db; Heluheluʻia ka mea hoʻokipa i kaʻikepili e hōʻikeʻia mai ka wahi i kohoʻia, A laila hoʻihoʻi i kaʻikepili i ka hōʻike hōʻike hōʻike lima lima. Hiki i ka mea hoʻohana ke hana i ke kahua waihona o ka heluheluʻana a me ka kākauʻana i ka'āina db ma ka lima lima, so that the handwheel can read and write the data in the DB area of the PLC.

na B. Kākoʻo ka mea hoʻokipa i siemens s7 protocol. Pili i plc s7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

I keʻano o ke kikowaena, Ua hoʻonohonoho ka mea hoʻohana i ka heluhelu PLC a kākau i ka leka uila ma o ka polokalamu WGP-ETS e hoʻonohonoho pono;E hoʻohana i ka polokalamu hoʻonohonoho plc e hoʻonohonoho pono ai e hoʻonohonoho i ka mea lawe i loko o keʻano client mode. Ma hope o ka hoʻonohonohoʻana, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Ke noi kiko'ī

ʻO ka noi kiko'ī o ka mea lawe lima lima a me nā siemens plc s7-200:

a. Ka pihi ma ka lima lima e pili ana i ka waiwai o ka bol i hoʻonohonohoʻia e ka mea hoʻohana ma ka PLC. Inā kaomi ka pihi o ka lima lima, ʻO ka wahi o ke kikowaenaʻo Boot, a ke hoʻokuʻuʻia nei, he wahahee ia, A hiki ke kauʻia ka'ōlelo kumu o ka boot wahi ma ka lima lima;

na B. Hiki i ka lima lima ke heluhelu i ka waiwai o ka wahi DB ma ka PLC. Hoʻokahi axis 4 nā hōʻailona o ka hōʻike hōʻike, a 6 axes he huina o 24 Kaumaha. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Hōʻailona hōʻikeʻike

5.Loaʻa iā Derminal Decinal wehewehe a me ka papaʻaina

6.Ka laulā nui

 

 

]]>