1. Khoom Taw Qhia

Handwheel Ua Hauj Lwm Cov Khoom Hluav Taws Xob	DC24V / 1A
Tau Txais Hluav Taws Xob Hluav Taws Xob	DC24V / 1A
Tus txais IO Cov zis thauj khoom	Dc24v
Tes Log Xeem Cub Ntev	10m
Tus txais kawg nkaus cable ntev	1m
Tus Txais Tos Lub Network Cable ntev	3m
Kev khiav hauj lwm kub	-25℃<X<55℃
Anti-poob siab	1m
Kev Cai Khab Ceev Kom Muaj	6
Khoom Qhov Loj	233*90.7*77.4(Hli)

4.Khoom tau ua haujlwm qhia tau

Tsab ntawv:

Nres Nres Nres:

Nias lub khawm thaum muaj xwm ceev, Thiab ob pawg ntawm kev kub ntxhov nres IO tawm tswv yim ntawm tus txais yuav raug txiav tawm, and all functions of the handwheel will be invalid.

Tom qab tso tawm qhov xwm txheej ceev, Qhov xwm txheej ceev nres Io tawm ntawm tus txais kev raug kaw, and all functions of the handwheel are restored.

Tshawb xyuas cov zaub:

6.2 Tau txais qhov ntev

6.3 Qhov dav dav ntawm Aviation Plugs

6.4 Tus txais ntaub ntawv siv tshuaj lom neeg siv
7.Cov Lus Qhia Khoom Lag Luam

1. Thaum tus txais yuav siv thiab ua haujlwm qhov taw qhia lub teeb ntawm tus txais flashes, Txuas lub receiver rau lub khoos phis tawm nrog lub network cable, Teeb tus IP chaw nyob ntawm lub khoos phis tawm, thiab siv lub network configuration cuab tam software los teeb tsa lub network tsis muaj kev ua haujlwm tau ua haujlwm. Rau txoj kev teeb tsa tshwj xeeb, Xa mus rau “LxWGP-ETS Wired HandWheel user phau ntawv qhia”.

2.Tom qab tus txais yog teeb tsa, Lub kaw lus xav tau kev pab cuam PLC program. Thov saib cov “LxWgp-ets sib txawv Siemens Cov Txheej Txheem Tswjhwm Txheej Txheem” and PLC program routine materials for details.

3.Tom qab ua tiav cov chaw saum toj no, coj tus txais rau lub tshuab hluav taws xob hluav taws xob thiab nruab nws. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Tom qab ua tiav cov chaw saum toj no, coj tus txais rau lub tshuab hluav taws xob hluav taws xob thiab nruab nws. Rub tawm lub network cable los ntawm lub khoos phis tawm thiab ntsaws rau hauv x inface ntawm lub system. Connect the receiver power supply and pulse line.

5. Xaiv Axis Xaiv: Switch the axis selection switch and select the axis you want to operate on.

6. Xaiv Daim Ntawv Tshaj Tawm: Switch the magnification switch and select the magnification level you need.

7. Txav axis: Nias thiab tuav lub pob qhib, Xaiv Lub Axis Xaiv Hloov, Xaiv lub zog hloov, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Nias thiab tuav ib qho khawm kev cai kom tig rau Io cov zis ntawm cov khawm sib raug nyob hauv tus txais, and release the button to turn off the output.

9. Nias lub khawm thaum muaj xwm ceev, Tus coj thaum muaj xwm ceev coj IO tawm ntawm tus txais yuav raug txiav tawm, Lub tes ua haujlwm muaj nuj nqi yuav raug neeg xiam, Tso Tawm Lub Pob Ceev, Qhov xwm txheej ceev nres Io tawm yuav raug kaw, and the handwheel function will be restored.

8.Cov qauv khoom piav qhia

9.Cov Khoom Muaj Teeb Meem Tua

1.Khoom Taw Qhia

2. Khoom ua haujlwm yam ntxwv

3. Cov Khoom Qhia Khoom Khoom

Operating voltage and current of wireless remote	3V/14MA
Battery specifications	2 AA alkaline batteries, size 5
Low voltage alarm range of wireless remote	< 2.3V
Tau Txais Hluav Taws Xob Hluav Taws Xob	DC5V-24V/A
Receiver emergency stop output load range	AC125V-1A/DC30V-2A
Receiver enable output load range	AC125V-1A/DC30V-2A
Receiver custom button output load range	DC24V/50mA
Receiver axis selection output load range	DC24V/50mA
Receiver magnification output load range	DC24V/50mA
Transmission power of handheld terminal	15dBm
Receiver receiving sensitivity	-100dBm
Wireless communication frequency	433MHz frequency band
Wireless communication distance	Barrier free distance of 40 meters
Operation temperature	-25℃ < X < 55℃
Anti fall height	1 (lub ntsuas)
Custom button quantity	2

4. Khoom tau ua haujlwm qhia tau

Sau ntawv:

① Pulse encoder:
Nias thiab tuav lub pob qhib, Co cov mem tes encoder, emit mem tes teeb liab,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: Tsawg tsawg voltage lub teeb, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
Nias lub khawm thaum muaj xwm ceev, Thiab ob pawg ntawm kev kub ntxhov nres IO tawm tswv yim ntawm tus txais yuav raug txiav tawm, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (Lub Zog Hloov):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Txhawb Daim Duab

6. Cov Khoom Qhia Cov Khoom Siv Installation
6.1 Cov Khoom Siv Cov Khoom Siv Installation

1. Nruab lub receiver rau hauv lub txee hluav taws xob los ntawm lub pob tw sab nraum qab, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Xa mus rau peb cov ntaub ntawv uas tau txais daim duab uas tau txais thiab muab piv nrog koj cov khoom siv hauv lub xaib. Connect the equipment to the receiver via cables.
3.After the receiver is properly fixed, Tus kav hlau txais xov tau nruab nrog tus txais yuav tsum tau sib txuas, and the outer end of the antenna should be installed or placed outside the electrical cabinet. Nws raug nquahu kom muab tso rau saum cov txee hluav taws xob rau cov teeb liab zoo tshaj. It is prohibited to leave the antenna unconnected or place it inside the electrical cabinet, as this may result in the signal being unusable.
4. Kawg no, turn on the power switch of the handwheel, and you can operate the machine remotely using the handwheel.

6.2 Tau txais qhov ntev

6.3 Tus txais ntaub ntawv siv tshuaj lom neeg siv

7. Cov Lus Qhia Khoom Lag Luam
1. Power on the machine and the receiver. The receiver’s working indicator light flashes. Install the battery in the wireless electronic handwheel, secure the battery cover, thiab
turn on the power switch of the wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. Xaiv cov kev sib koom tes axis: Nias thiab tuav lub pob qhib, toggle the axis selection switch, and select the axis you want to operate.
3. Xaiv Daim Ntawv Tshaj Tawm: Nias thiab tuav lub pob qhib, toggle the magnification switch,and select the desired magnification level.
4. Txav axis: Nias thiab tuav lub pob qhib, Xaiv Lub Axis Xaiv Hloov, Xaiv lub zog hloov, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. Nias thiab tuav ib qho kev cai khawm, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. Nias lub khawm thaum muaj xwm ceev, Tus coj thaum muaj xwm ceev coj IO tawm ntawm tus txais yuav raug txiav tawm, Lub tes ua haujlwm muaj nuj nqi yuav raug neeg xiam,Tso Tawm Lub Pob Ceev, Qhov xwm txheej ceev nres Io tawm yuav raug kaw, and the handwheel function will be restored.
7. Yog tias tus tes tau ua haujlwm rau ib lub sijhawm, it will automatically enter sleep mode to reduce power consumption. Thaum nws tau siv dua, the handwheel can be activated by pressing the enable button.
8. Yog hais tias tus tes tau siv rau lub sijhawm ntev, it is recommended to switch the handwheel shaft to the OFF position, Kaw cov hwj huam sib luag, and extend the battery life.

8. Cov qauv khoom piav qhia

① :ZTWGP represents the appearance style
②：Mem tes tsim tawm cov lus qhia:
01: Indicates that the pulse output signal is A, B; Mem kev voltage 5v; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; Mem kev voltage 5v; pulse quantity 100PPR.
04：Qhia tau tias qib qis NPN qhib cov khoom siv hluav taws xob, nrog mem tes tsim tawm cim ntawm a thiab b;The number of pulses is 100PPR.
05：Qhia tias yog cov qib siab PNP cov zis, nrog mem tes tsim tawm cim ntawm a thiab b; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 sawv cev 2 axes.
④：Represents the type of axis selection switch signal, Ib qho sawv cev rau taw tes-rau-taw qhia kev tawm tsam, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, Ib qho sawv cev rau taw tes-rau-taw qhia kev tawm tsam, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 sawv cev 2 custom buttons.
⑦：Represents the power supply for the system handwheel, thiab 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

1.Khoom Taw Qhia

Wireless Electronic Handwheel yog siv rau kev taw qhia kev qhia, muab tso rau, Tuam Pab Ua Si,thiab lwm yam haujlwm ntawm cnc tshuab cov cuab yeej. Cov khoom lag luam no tau txais wireless spiness technology, Pov Tseg Tsiv Tsoos Hlau Caij Nplooj Hlav Hlau Txuas, Txo cov khoom ua tsis tiav tshwm sim los ntawm cov cable, eliminating the disadvantages of cable dragging and oil stains, thiab ua haujlwm kom yooj yim dua. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,ua kom dav, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Khoom nta
1. Txais yuav 433MHz wireless kev sib txuas lus thev naus laus zis, wireless kev ua haujlwm deb yog 40 meters;
2. Txais yuav cov zaus tsis siv neeg hopping muaj nuj nqi, kev siv 32 sets of wireless remote controllers at the same time without affecting each other;
3. Txhawb Nqa Xwm Ceev, Hloov io teeb liab tawm, connected to the system through IO wiring;
4. Ev 4 Kev cai khawm, Hloov io teeb liab, Tso zis teeb liab mus rau lub system los ntawm Io-Link Protocol;
5. Txhawb Lub Pob Ceev Ceev + thiab khawm -, Nias thiab tuav lub pob los hloov lub tes cawm tau txav lub tshuab;
6. Txhawb Nqa 6-Axis Tswj, Hloov io teeb liab, Tso zis teeb liab mus rau lub system los ntawm Io-Link Protocol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. TXHAWJ ECODER, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Sau ntawv:
①ل Clock Khawm:
Nias lub khawm thaum muaj xwm ceev, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Kev cai khawm, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Nias thiab tuav lub pob kom pab thiab tuav tes ntawm cov mem tes los xa tawm cov mem tes
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Daim Duab

6.Cov Khoom Qhia Cov Khoom Siv Installation

6.1 Cov Khoom Siv Cov Khoom Siv Installation

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Xa mus rau peb cov ntawv txais nyiaj xoos, Sib piv nws nrog koj cov khoom siv hauv thaj chaw, Thiab Txuas Rau
the equipment to the receiver via cables.
3. Tom qab tus txais yog tsau, Tus kav hlau txais xov tau nruab nrog tus txais yuav tsum tau sib txuas,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Nws raug nquahu kom muab tso rau saum cov txee hluav taws xob rau cov teeb liab zoo tshaj. Nws
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Kawg no, tig rau ntawm tes fais fab hloov thiab koj tuaj yeem tsav lub tshuab los ntawm
handwheel remote control.

6.2 Tau txais qhov ntev

6.3 Tus txais ntaub ntawv siv tshuaj lom neeg siv

7. Kev Txij Nkawm thiab Kev Saib Xyuas

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
the service life;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Thov zam tsis txhob muab cia, kev poob, tsoo, tus lwm yam. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Yog tias tsis siv sijhawm ntev, Thov khaws cov tes ua kom huv thiab nyab xeeb;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Please read the instructions carefully before use. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Yog tias yuav tsum tau kho kho, Thov hu rau cov chaw tsim khoom. If the damage is caused by self-repair,
the manufacturer will not provide warranty.

1.Taw qhia ntawm cov chaw taws teeb tswj

A.Product composloj
Siemens tiag-lub sij hawm sib koom ua ke saib cov khoom siv hluav taws xob hluav taws xob hluav taws xob hluav taws xob hluav taws xob muaj ob ntu: Hluav Taws Xob + tus txais;

b.charcacterics

*6 Kev cai khawm tuaj yeem tswj tau 6 Hloov pauv;
*Daim duab tso tawm cov yeeb yaj kiab no, and supports 6-axis display of real-time coordinates.

2.Daim Ntawv Thov Teb

1) Hluav Taws Xob Hluav Taws Xob Txuas Nrog rau Plc ntawm Ethernet tau txais

a.Qhov ua rau cov ntaub ntawv tseem ceeb wirelessly rau tus txais, Thiab tus txais sau cov yuam sij los ntawm Network Cable plc system db cheeb tsam; Tus txais ntawv tau nyeem cov ntaub ntawv kom pom los ntawm cov DB cheeb tsam, thiab tom qab ntawd rov qab cov ntaub ntawv mus rau HandWwheel Zaub Screen. Tus neeg siv tuaj yeem kho qhov chaw nyob ntawm qhov chaw nyob ntawm kev nyeem thiab sau DB cheeb tsam ntawm Handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. Tus txais kev pab txhawb siemens S7 raws tu qauv. Siv rau plc s7-200, PLC S7-300 and PLC S7-1200.

C. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Nyob rau hauv hom server, Tus neeg siv khoom tsim kho cov plc nyeem thiab sau chaw nyob los ntawm WGP-ETS Configuration Software;Siv cov plc kev txuas contriguration cuab yeej kom kho tau tus txais nyiaj rau cov neeg siv hom. Tom qab teeb tsa, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Daim Ntawv Thov Tshwj Xeeb

Daim ntawv thov tshwj xeeb ntawm HandowWerAveye thiab Siemens plc s7-200:

ib. Lub pob ntawm tes tau sib haum rau tus nqi ntawm cov booil cheeb tsam teeb tsa los ntawm tus neeg siv hauv PlC. Yog tias lub pob ntawm tes tau nias, Qhov chaw ua si booter yog qhov tseeb, thiab thaum nws raug tso tawm, Nws yog cuav, thiab lub hauv paus chaw nyob ntawm bol cheeb tsam tuaj yeem tsim los ntawm kev tuav tes;

b. Tus tes tau tuaj yeem nyeem cov nqi ntawm DB cheeb tsam hauv PlC. Ib Axis muaj 4 bytes ntawm cov ntaub ntawv pom, thiab 6 Axes muaj tag nrho 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Cov tsos pom kev taw qhia

5.Cov neeg tau txais lub davhlau ya nyob thiab coding rooj

6.Tsos Loj