Daim ntawv thov:Tshwj xeeb siv rau Crawler Hlau Tshuab
1.Supports automatic cutting mode, automatically adjusts the walking speed of the small motor according to the large motor current, and achieves automatic cutting control.
2.Teeb meem-dawb kis tau deb yog 200 meters.
3. Supports dual speed regulation for large motors and small motors.
4. Support small motor turning in place.
5. Supports left and right wheel small motor linear correction.
Tus qauv: DH12S-LD
Muaj cov cuab yeej siv tau:crawler wire saw machine
Tsab ntawv: Koj tuaj yeem xaiv ib ntawm peb tus kav hlau txais xov. Lub khob xaim tshuaj tiv thaiv tus kav hlau txais xov yog qauv los ntawm lub neej ntawd.
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (tsis txhob hloov tau)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)
Tsawg qes: Cov chaw taws teeb tswj cov roj teeb yog tsawg heev, Thov hloov lub roj teeb.
Network poob: Lub teeb liab wireless cuam tshuam. Thov kos lub zog ntawm tus txais, Lub hwj chim nws dua, thiab rov pib kho cov chaw taws teeb.
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, Qhib lub hwj chim hloov, andthe display will show the motor speed, qhia tau tias muaj kev vam meej pib.
2.Large motor and speed regulation
Tig lub “Forward / Rov Qab” hloov mus rau tom ntej, the receiver’s large motor will turn on, and the display will show forward
Tig lub “Forward / Rov Qab” hloov mus rov qab, the large motor of the receiver will turn on in reverse, and the display will show reverse
Tig lub “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “Forward / Rov Qab” hloov mus rau tom ntej, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
Tig lub “Forward / Rov Qab” hloov mus rov qab, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
Tig lub “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
Tig lub “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
Hauv phau ntawv hom:
Turn left in place: Nias thiab tuav tus “Enable” button, tig lub “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: Nias thiab tuav tus “Enable” button, tig lub “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
In automatic mode: press and hold the “Enable” khawm thiab tig lub “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.Automatic cutting
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Hauv phau ntawv hom, press and hold the “Enable” khawm thiab tig lub “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 to 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (cov neeg siv raug txwv tsis pub hloov kho nws yam tsis tau kev tso cai)
Some functions of the remote control can be adjusted through parameters. Hauv phau ntawv hom, when the small motor speed S2 is 10, thawb rau pem hauv ntej / rov qab hloov peb zaug uake, and then push it down three times in a row to enter the parameter menu;
Tawm ntawm Parameter Menu: choose to save or not save, then press the enable button to confirm the exit;
Maximum current: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, tsis ua li raug txib lawm 800, Kev hloov kho yog txwv tsis pub;
Deceleration Parameter: automatic cutting control parameter. Thaum tus txiav tam sim no hloov tus nqi tshaj tus nqi no,deceleration begins.
Kev nrawm A1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maximum walking: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Speed limit offset: the maximum speed of the small motor during automatic cutting.
Maximum host: maximum speed of large motor.
The final interpretation right of this product belongs only to our company.
