1. 12 Nyees khawm, 6 ntawm uas txhawb I / O cov cim.
2. Txhawb 2.8-nti xim npo zaub.
3. Txhawb ib qho 9-theem axis selector hloov, txhawb nqa mus txog 6-axis tso zis.
4. Txhawb nqa ib qho 3-theem multiplier hloov.
Wireless Remote Control rau 3D Tsib-Axis Laser Txiav：PHB06B-LASER
Kev piav txog
1.Khoom Taw Qhia
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, txhawb nqa 12 Nyees khawm, and supports real-time display of system coordinates and status.
2.Khoom nta
1. 12 Nyees khawm, 6 ntawm uas txhawb I / O cov cim.
2. Txhawb 2.8-nti xim npo zaub.
3. Txhawb ib qho 9-theem axis selector hloov, txhawb nqa mus txog 6-axis tso zis.
4. Txhawb nqa ib qho 3-theem multiplier hloov.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2a them cov lus qhia tshwj xeeb, built-in battery specifications 18650/12775mWh.
3.Ua Haujlwm Cov Ntsiab Cai
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Tsab ntawv: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.Khoom Specifications
| Tau Txais Hluav Taws Xob Hluav Taws Xob | DC5V-DC24V |
| Button lifespan | 1,000,000 lub sij hawm |
| Operating Temperature |
-25℃ < X < 55℃
|
| Safe drop height | 1 m |
| Receiver port | Ethernet |
| Number of buttons |
12
|
| Lub vijtsam zaub |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| Wireless communication distance | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | DC24V / 1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Khoom tau ua haujlwm qhia tau
Sau ntawv:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 Nyees khawm
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 pulses per revolution.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
Tau txais qhov ntev
Chav tsev: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. Thov siv nws nyob rau hauv ib puag ncig qhuav ntawm chav sov thiab siab kom txuas nws lub neej pabcuam.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, tus lwm yam. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.Cov Ntaub Ntawv Kev Nyab Xeeb
1. Thov nyeem cov lus qhia kom zoo zoo ua ntej siv thiab txwv tsis pub cov kws tshaj lij los ntawm kev ua haujlwm.
2. If you repair it yourself and cause damage, the warranty will be void.
