Kev piav txog
1.Khoom Taw Qhia
Wireless Remote Control is used for manual guidance, muab tso rau, tool setting and other operations of CNC machine tools. Cov khoom lag luam no tau txais wireless spiness technology, Pov Tseg Tsiv Tsoos Hlau Caij Nplooj Hlav Hlau Txuas, Txo cov khoom ua tsis tiav tshwm sim los ntawm cov cable, Tshem tawm qhov tsis zoo ntawm cable cab, roj stains, lwm yam., and is more convenient to operate.It is widely applicable to CNC machine tools such as gantry machining centers, gantry vertical lathes, and CNC gear processing machines, and is compatible with various mainstream CNC system brands on the market, including Siemens, Mitsubishi, Tus ua siab zoo nkauj, Syntec and more.
2.Khoom nta
1. Txais 433MHz wireless kev sib txuas lus thev naus laus zis nrog kev ua haujlwm wireless ntawm 20 meters.
2.Adaptive zaus hopping; 32 teeb ntawm wireless chaw taws teeb tswj yuav siv tau ib txhij yam tsis muaj kev cuam tshuam.
3.Supports the emergency stop button, and the emergency stop button remains effective even after the remote control is powered off.
4.Txhawb nqa 3 kev cai nyees khawm nrog hloov IO teeb liab tso zis.
5.Txhawb 6-axis tswj, thiab 7 rau 12-axis tswj yog customizable.
6. Txhawb 3-ceev magnification tswj, thiab 4-ceev magnification tswj yog customizable.
7.txhawb nqa khawm ua haujlwm, uas tuaj yeem tso tawm hloov IO cov cim, thiab tseem tswj kev xaiv axis, magnification thiab encoder.
8.Txhawb kev hloov kho hom encoding ntawm axis xaiv thiab magnification ntawm software.
9. Supports pulse encoder with specification of 100 pulses per revolution.
10. Supports standard Type-C charging with 5V-2A charging specification; built-in battery
specification: 14500 / 1100mluav.
| Working Voltage and Current of Handheld Terminal |
3.7V/20.0mA |
| Charging Battery Specification |
3.7V/14500/1100mAh
|
| Low Voltage Alarm Range of Handheld Terminal |
<3.35V |
| Receiver Power Supply Voltage |
DC5V-24V/1A |
| Receiver Emergency Stop Output Load Range |
AC125V-1A/DC30V-2A |
| Receiver Enable Output Load Range |
AC125V-1A/DC30V-2A |
| Receiver Custom Button Output Load Range |
DC24V/50mA
|
| Receiver Axis Selection Output Load Range |
DC24V/50mA |
| Receiver magnification Output Load Range |
DC24V/50mA |
| Handheld Terminal Transmit Power |
15dBm
|
| Receiver receiving sensitivity |
-100dBm |
| Wireless communication frequency |
433MHz frequency band
|
| Wireless Communication Distance |
20 meters barrier-free distance
|
| Operating Temperature |
-25℃<X<55℃ |
| Safe drop height |
1 m
|
| Number of Custom Buttons |
3
|
| Product Weight |
546.86（g） |
| Product Dimensions |
200*87*72(Hli) |
4. Khoom tau ua haujlwm qhia tau
Sau ntawv:
① Emergency Stop Button:
Nias lub khawm thaum muaj xwm ceev, the two groups of emergency stop IO outputs on the receiver will disconnect, and all remote control functions will be invalidated.Release the emergency stop button, the emergency stop IO outputs on the receiver will be closed, and all remote control functions will be restored. Ntxiv rau, even if the remote control is powered off, pressing the emergency stop button can still activate the emergency stop IO output of the receiver.
② Enable Button:
Press either enable button on both sides, the two sets of enable IO outputs on the receiver will conduct. Release the enable button, and the enable IO outputs will disconnect. It is necessary to press and hold the enable button before toggling axis selection, magnification or rotating the remote control for the operation to take effect.This function can be canceled through the configuration software.
③ Axis Selection Switch (Power Switch):
Nias thiab tuav lub pob qhib, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.
④ Pulse Encoder:
Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.
⑤ LCD Display Screen:
5. Product Accessories Diagram
6. Cov Khoom Qhia Cov Khoom Siv Installation
6.1 Cov Khoom Siv Cov Khoom Siv Installation
1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.
2. Xa mus rau peb cov ntawv txais nyiaj xoos, Sib piv nws nrog koj cov khoom siv hauv thaj chaw, and connect the equipment to the receiver with cables.
3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; otherwise, signal failure may occur.
4. Kawg no, turn on the remote control power switch, then you can remotely operate the machine via the remote control.
6.2 Receiver Installation Dimensions
6.3 Tus txais ntaub ntawv siv tshuaj lom neeg siv
7. Cov Lus Qhia Khoom Lag Luam
1. Power on the machine and the receiver. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.
2. Select the axis : Nias thiab tuav lub pob qhib, toggle the axis selection switch to select the axis to be operated.
3. Select the magnification: Nias thiab tuav lub pob qhib, toggle the magnification switch to select the required magnification gear.
4. Axis movement: Nias thiab tuav lub pob qhib, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.
5. Nias thiab tuav ib qho kev cai khawm, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.
6. Nias lub khawm thaum muaj xwm ceev, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.
7. If the wireless remote control is not operated for a period of time, it will automatically enter sleep mode to reduce power consumption. It can be used normally again by pressing the enable button again.
8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life
8. Cov qauv khoom piav qhia
①：UWGP stands for appearance style.
②：Pulse Output Parameters：
01: Indicates that the pulse output signal is A, B; Mem kev voltage 5v; pulse quantity 100PPR.
02: Indicates that the pulse output signal is A, B; Pulse voltage 12V; pulse quantity 25PPR.
03: Indicates that the pulse output signal is A, B, A -, B -; Mem kev voltage 5v; pulse quantity 100PPR.
04: Qhia tau tias qib qis NPN qhib cov khoom siv hluav taws xob, nrog mem tes tsim tawm cim ntawm a thiab b; The number of pulses is 100PPR.
05: Qhia tias yog cov qib siab PNP cov zis, nrog mem tes tsim tawm cim ntawm a thiab b; The number of pulses is 100PPR.
③：Represents the axis selection switch quantity; 6 stands for 6 li 2es, 7 stands for 7 li 2es, and so on.
④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.
⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.
⑥: Represents the number of custom buttons; 3 corresponds to 6 Kev cai khawm.
⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, thiab 24 stands for 24V power supply.
⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.
9. Cov Khoom Uas Muaj Khoom Siv
10. Maintenance and upkeep
1. Thov siv nws nyob rau hauv ib puag ncig qhuav ntawm chav sov thiab siab kom txuas nws lub neej pabcuam.
2. Please avoid using in abnormal environments such as rain and water to extend the service life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, tus lwm yam. to prevent damage to the precision components inside the remote control or accuracy errors.
5. Yog tias tsis siv sijhawm ntev, please store the remote control in a clean and safe place.
6. Avoid moisture and shock during storage and transportation.
11. Cov Ntaub Ntawv Kev Nyab Xeeb
1. Thov nyeem cov lus qhia kom zoo zoo ua ntej siv thiab txwv tsis pub cov kws tshaj lij los ntawm kev ua haujlwm.
2. Please charge the remote control in a timely manner when the battery level is too low, to avoid malfunction and operational errors caused by insufficient power.
3. If you repair it yourself and cause damage, the warranty will be void.
