Programirani CNC bežični daljinski upravljač PHB10

Opis

1.Uvod proizvoda

The programmable CNC remote control PHB10 is suitable for wireless
daljinsko upravljanje radom raznih CNC sustava. It supports user-defined
programming to develop button functions, and realize remote control of various
functions on the CNC system; it supports user-defined programming to develop
LED lights to light up and turn off, and realize dynamic display of system status;
the remote control comes with a rechargeable battery and supports Type-C
interface charging.

2.Značajke proizvoda

1. Korištenje tehnologije bežične komunikacije 433MHZ, bežični rad
udaljenost je 80 metara;
2.Korištenje funkcije automatskog skakanja frekvencije, 32 setovi bežičnih daljinskih upravljača
kontroleri se mogu koristiti u isto vrijeme bez utjecaja jedan na drugog;
3.Podržati 32 prilagođeno programiranje gumba;
4.Podržati 9 custom LED light display programming;
5.Support IP67 waterproof level;
6.Support standard Type-C interface charging; 5Specifikacije punjenja V-2A;
1100 mAh large capacity battery, with automatic sleep standby function; realize
ultra-long low power standby;
7.Support real-time display of power.

3.Princip rada

4. Specifikacije proizvoda

5.UVOD FUNKCIJA PROIZVODA

Bilješke：
①Battery level display：
Lights up after power on, turns off after power off;
If the battery indicator light is only one bar and keeps flashing, it means the
battery is too low. Please replace the battery;

If the battery indicator lights are all on and the other LED lights flash back and
forth, it means the battery is very low. Please replace the battery;
If the battery indicator does not light up or go out, and the device cannot be
started by pressing and holding the power button, molimo zamijenite bateriju;

②Button area：32 buttons arranged in 4X8, korisnički definirano programiranje;

③Status LED：
COMMU: Button indicator light, lights up when the button is pressed and goes
out when the button is released; other lights are custom displays;

④Power switch：
Long press for 3 seconds to turn on, long press for 3 seconds to turn off;
⑤Charging port：
Use Type-C charger to charge, napon punjenja 5V, struja 1A-2A; charging
time 3-5 sati;

When charging, the power indicator flashes, indicating that it is charging. When
fully charged, the power indicator will show full bar without flashing.

6.Dijagram dodataka za proizvod

7.Vodič za instalaciju proizvoda

1 . I nsert the USB receiver into the computer, računalo će automatski
recognize and install the USB device driver without manual
2. Umetnite daljinski upravljač u punjač. Nakon što je baterija potpuno napunjena, press
and hold the power button for 3 seconds. The remote control will turn on and the power
indicator will light up, indicating that the power-on is successful.
3. Nakon uključivanja, možete izvršiti bilo koju radnju gumba. The remote control
can support dual button operation at the same time. Kada pritisnete bilo koju tipku, a
COMMU light on the remote control will light up, indicating that this button is valid.

8.Upute za rad proizvoda
Prije razvoja i uporabe proizvoda, you can use the demo software we provide to
test the buttons on the remote control and the LED light on the remote control. You can
also use the demo as a reference routine for future programming development.
Prije korištenja demo softvera, priključite USB prijemnik u računalo,
make sure the remote controller has sufficient power, press and hold the power button to t
urn it on, a zatim ga upotrijebite;
Kada se pritisne bilo koji gumb na daljinskom upravljaču, the test software demo will display
the corresponding key value. Nakon puštanja, prikaz vrijednosti ključa nestaje,
indicating that the key upload is normal;
You can also select the LED light number on the test software demo, click download,
and the corresponding light number on the remote control will light up, indicating that the
LED light is downloading normally.

9.Rješavanje problema s proizvodima

10. Održavanje i briga

1. Koristite ga u suhom okruženju s normalnom temperaturom i tlakom za produženje
životni vijek;
2. Ne koristite oštre predmete za dodirivanje područja ključa kako biste produžili vijek trajanja ključa;
3. Održavajte područje ključa čistim kako biste smanjili trošenje ključa;
4. Izbjegavajte stiskanje i pad kako biste oštetili daljinski upravljač;
5. Ako se dugo ne koristi, please remove the battery and store the remote control
and battery in a clean and safe place;
6. Obratite pozornost na otpornost na vlagu tijekom skladištenja i transporta.

11.Sigurnosne informacije

1. Prije uporabe pažljivo pročitajte upute. Non-professionals are prohibited from
operating.
2. Please use the original charger or a charger produced by a regular manufacturer with the
same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing the
remote control to be unresponsive.
4. Ako je potreban popravak, Molimo kontaktirajte proizvođača. If the damage is caused by self-repair,
Proizvođač neće pružiti jamstvo.