Aplikasi khusus untuk Siemens – Teknologi Wixhc https://www.wixhc.cn Industry Leader Wed, 05 Nov 2025 06:21:59 +0000 id-ID hourly 1 https://wordpress.org/?v=6.8.3 Manual Instruksi handwheel elektronik berkabel https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Pengenalan Produk

Electronic handwheel is used for manual guidance, penentuan posisi, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.Fitur fungsional produk
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 meters.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, axis selection, magnification, and other information.
3. Mendukung tombol berhenti darurat, beralih keluaran sinyal IO, and the hand wheel shutdown emergency stop is still valid.
4. Mendukung 6 tombol khusus, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Mendukung 6 or 8 kontrol sumbu, with switch IO signals that can be output to the system through IO wiring or communication.
6. Mendukung 3 or 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulsa/putaran, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Spesifikasi produk
Handwheel working power supply voltage DC24V/1A
Tegangan catu daya penerima DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10M
Receiver end cable length 1M
Receiver end network cable length 3M
Operating temperature -25℃<X<55℃
Anti-fall height 1M
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Pengenalan fungsi produk

Catatan:
Emergency stop button:
Tekan tombol berhenti darurat, dan dua set output IO penghentian darurat pada penerima akan terputus, and all functions of the handwheel will be invalid.
After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 tombol khusus, masing-masing sesuai dengan titik keluaran IO pada penerima, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Tekan dan tahan tombol aktifkan, kocok encoder pulsa, memancarkan sinyal pulsa, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Diagram aksesori produk

6. Panduan Instalasi Produk
6.1 Langkah-langkah instalasi produk
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Lihat diagram pengkabelan receiver kami dan bandingkan dengan peralatan di lokasi Anda. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Dimensi pemasangan penerima

6.3 Installation dimensions of aviation plugs

6.4 Diagram Referensi Pengkabelan Penerima
7.Petunjuk Pengoperasian Produk

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Pilih pembesaran: Switch the magnification switch and select the magnification level you need.
7. Sumbu bergerak: Tekan dan tahan tombol aktifkan, pilih sakelar pemilihan sumbu, pilih sakelar pembesaran, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Tekan tombol berhenti darurat, output IO penghentian darurat yang sesuai dari penerima akan terputus, fungsi roda tangan akan dinonaktifkan, lepaskan tombol berhenti darurat, keluaran IO penghentian darurat akan ditutup, and the handwheel function will be restored.
8.Deskripsi Model Produk

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : represents the number of axis selection switches, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Maintenance
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Harap hindari meremas, jatuh, menabrak, dll.. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Jika tidak digunakan dalam waktu lama, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Informasi Keselamatan

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Jika perbaikan diperlukan, silakan hubungi produsennya. Jika kerusakan disebabkan oleh perbaikan sendiri, pabrikan tidak akan memberikan garansi

 

]]> Remote nirkabel khusus untuk instruksi operasi mesin bubut vertikal CNC https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Pengenalan Produk

Remote control nirkabel khusus untuk mesin bubut vertikal CNC digunakan untuk panduan manual, penentuan posisi, pengaturan alat, dan operasi lainnya pada peralatan mesin vertikal CNC. Produk ini mengadopsi teknologi transmisi nirkabel, menghilangkan kebutuhan akan sambungan kabel pegas tradisional, mengurangi kegagalan peralatan yang disebabkan oleh kabel, dan menghilangkan kerugian dari terseretnya kabel dan noda minyak, membuat operasi lebih nyaman. Ini berlaku secara luas untuk berbagai mesin bubut vertikal seperti mesin bubut vertikal CNC, mesin bubut vertikal satu kolom, dan mesin bubut vertikal dua kolom. Ini juga dapat disesuaikan dengan berbagai sistem CNC di pasaran, seperti Siemens,
mitsubishi, Fanuc, and Syntec.

2. Fitur fungsional produk

1. Mengadopsi 433 Teknologi komunikasi nirkabel MHz, dengan jarak pengoperasian nirkabel 40 meters.
2.Mengadopsi fungsi dan penggunaan frekuensi hopping otomatis 32 set pengendali jarak jauh nirkabel secara bersamaan, without affecting each other.
3. Mendukung tombol berhenti darurat, switch IO signal output.
4. Mendukung 2 tombol yang dapat disesuaikan, with switch-type IO signal output.
5. Mendukung -2 axis control.
6. Supports 3-level magnification control.
7. Mendukung fungsi tombol aktifkan, yang dapat mengeluarkan sinyal IO hidup/mati dan mengontrol pemilihan sumbu, faktor pengali, and encoder.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Mendukung encoder pulsa, dengan spesifikasi 100 pulses per revolution.
3. Spesifikasi produk
Tegangan pengoperasian dan arus remote nirkabel
3V/14MA
Spesifikasi baterai 2 Baterai alkaline AA, size 5
Rentang alarm tegangan rendah dari remote nirkabel < 2.3V
Tegangan catu daya penerima DC5V-24V/A
Rentang beban keluaran penghentian darurat penerima AC125V-1A/DC30V-2A
Penerima mengaktifkan rentang beban keluaran
AC125V-1A/DC30V-2A
Rentang beban keluaran tombol khusus penerima DC24V/50mA
Rentang beban keluaran pemilihan sumbu penerima DC24V/50mA
Rentang beban keluaran pembesaran penerima DC24V/50mA
Kekuatan transmisi terminal genggam
15dBm
Penerima menerima sensitivitas -100dBm
Frekuensi komunikasi nirkabel 433Pita frekuensi MHz
Jarak komunikasi nirkabel Jarak bebas hambatan 40 meter
Suhu pengoperasian -25℃ < X < 55℃
Ketinggian anti jatuh 1 (meter)
Jumlah tombol khusus 2
4. Pengenalan Fungsi Produk



Catatan:

① Enkoder pulsa:
Tekan dan tahan tombol aktifkan, kocok encoder pulsa, memancarkan sinyal pulsa,and control the movement ofthe machine axis.
② Tombol aktifkan:
Tekan salah satu tombol aktifkan di kedua sisi, dan dua set output IO aktif pada penerima akan bekerja. Lepaskan tombol aktifkan untuk memutuskan keluaran aktifkan IO; Dan sebelum mengganti perbesaran pemilihan sumbu dan menggoyangkan handwheel,tombol aktifkan perlu ditekan agar efektif; This function can be cancelled through configuration software.

③ Lampu indikator:
Lampu sisi kiri: menyalakan lampu,roda tangan menggunakan sumbu untuk memilih OFF untuk menghidupkan, dan lampu ini tetap menyala setelah dihidupkan;
Cahaya tengah: lampu sinyal yang menyala saat mengoperasikan fungsi apa pun pada roda tangan, dan tidak menyala saat tidak ada pengoperasian;
Lampu sisi kanan: Lampu alarm tegangan rendah, tingkat baterai rendah,lampu ini berkedip atau tetap menyala, battery needs to be replaced.

④ Tombol berhenti darurat:
Tekan tombol berhenti darurat, dan dua set output IO penghentian darurat pada penerima akan terputus, and all functions of the handwheel will be invalid.

⑤ Sakelar pembesaran:
Tekan dan tahan tombol aktifkan untuk mengganti sakelar pembesaran, which can switch the magnification controlled by the handwheel.

⑥ Sakelar pemilihan sumbu (saklar daya):
Tekan dan tahan tombol aktifkan untuk mengganti sakelar pemilihan sumbu, yang dapat mengganti sumbu gerakan yang dikendalikan oleh handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Tombol khusus:
Dua tombol khusus, each corresponding to an IO output point on the receiver.

5. Diagram aksesori produk

6. Panduan Instalasi Produk
6.1 Langkah-langkah instalasi produk

1. Pasang penerima ke dalam kabinet listrik melalui gesper di bagian belakang, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Lihat diagram pengkabelan receiver kami dan bandingkan dengan peralatan di lokasi Anda. Connect the equipment to the receiver via cables.
3.Setelah penerima diperbaiki dengan benar, antena yang dilengkapi dengan penerima harus terhubung, dan ujung luar antena harus dipasang atau ditempatkan di luar kabinet listrik. Disarankan untuk meletakkannya di bagian atas kabinet listrik untuk efek sinyal terbaik. Dilarang membiarkan antena tidak tersambung atau meletakkannya di dalam kabinet listrik, as this may result in the signal being unusable.
4. Akhirnya, nyalakan saklar daya handwheel, and you can operate the machine remotely using the handwheel.

6.2 Dimensi pemasangan penerima

6.3 Diagram Referensi Pengkabelan Penerima

7. Petunjuk pengoperasian produk
1. Nyalakan mesin dan penerima. Lampu indikator kerja receiver berkedip. Pasang baterai pada handwheel elektronik nirkabel, kencangkan penutup baterai, Dan
nyalakan sakelar daya handwheel elektronik nirkabel. The handwheel’s battery level indicator light is on.
2. Pilih sumbu koordinat: Tekan dan tahan tombol aktifkan, alihkan sakelar pemilihan sumbu, and select the axis you want to operate.
3. Pilih pembesaran: Tekan dan tahan tombol aktifkan, aktifkan sakelar pembesaran,and select the desired magnification level.
4. Sumbu bergerak: Tekan dan tahan tombol aktifkan, pilih sakelar pemilihan sumbu, pilih sakelar pembesaran, lalu putar encoder pulsa. Putar searah jarum jam untuk memindahkan
positive axis and counterclockwise to move the negative axis.
5. Tekan dan tahan tombol khusus apa pun, dan tombol output IO yang sesuai dari penerima akan dihidupkan. Lepaskan tombolnya, and the output will be turned off.
6. Tekan tombol berhenti darurat, output IO penghentian darurat yang sesuai dari penerima akan terputus, fungsi roda tangan akan dinonaktifkan,lepaskan tombol berhenti darurat, keluaran IO penghentian darurat akan ditutup, and the handwheel function will be restored.
7. Jika handwheel tidak dioperasikan untuk jangka waktu tertentu, secara otomatis akan masuk ke mode tidur untuk mengurangi konsumsi daya. Ketika digunakan kembali, the handwheel can be activated by pressing the enable button.
8. Jika handwheel tidak digunakan dalam waktu lama, disarankan untuk memindahkan poros handwheel ke posisi OFF, matikan daya roda tangan, and extend the battery life.

8. Deskripsi Model Produk

① :ZTWGP mewakili gaya penampilan
②：Parameter keluaran pulsa:
01: Menunjukkan bahwa sinyal keluaran pulsa adalah A, B; Tegangan pulsa 5V; pulse quantity 100PPR.
02：Menunjukkan bahwa sinyal keluaran pulsa adalah A dan B; Tegangan pulsa 12V; pulse quantity 100PPR.
03：Menunjukkan bahwa sinyal keluaran pulsa adalah A, B, A -, B -; Tegangan pulsa 5V; pulse quantity 100PPR.
04：Menunjukkan output sirkuit terbuka NPN tingkat rendah, dengan sinyal keluaran pulsa A dan B;The number of pulses is 100PPR.
05：Menunjukkan keluaran sumber PNP tingkat tinggi, dengan sinyal keluaran pulsa A dan B; The number of pulses is 100PPR.
③：Mewakili jumlah sakelar pemilihan sumbu, 2 mewakili 2 axes.
④：Mewakili jenis sinyal sakelar pemilihan sumbu, A mewakili sinyal keluaran titik-ke-titik, and B represents encoded output signal.
⑤：Mewakili jenis sinyal saklar perkalian, A mewakili sinyal keluaran titik-ke-titik, and B represents encoded output signal.
⑥：Mewakili jumlah tombol khusus, 2 mewakili 2 custom buttons.
⑦：Mewakili catu daya untuk sistem handwheel, Dan 05 represents 5V power supply.
⑧：L mewakili kolom kiri (tempat pisau kiri), dan R mewakili kolom kanan (tempat pisau kanan).

9.Solusi untuk Kerusakan Produk

10. Pemeliharaan produk

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Harap hindari meremas, jatuh, menabrak, dll.. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Jika tidak digunakan dalam waktu lama, harap simpan handwheel di tempat yang bersih dan aman. Selama penyimpanan dan transportasi, attention should be paid to moisture and shock resistance.

11. Informasi Keselamatan

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Jika perbaikan diperlukan, silakan hubungi produsennya. Jika kerusakan disebabkan oleh perbaikan sendiri, pabrikan tidak akan memberikan garansi

]]> Handwheel elektronik nirkabel khusus FANUC https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Mungkin 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Pengenalan Produk

Wireless electronic handwheel is used for manual guidance, penentuan posisi, tool alignment,and other operations on CNC machine tools. Produk ini mengadopsi teknologi transmisi nirkabel, eliminating the traditional spring wire connection, mengurangi kegagalan peralatan yang disebabkan oleh kabel, eliminating the disadvantages of cable dragging and oil stains, dan membuat pengoperasian lebih nyaman. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Fitur Produk
1. Mengadopsi teknologi komunikasi nirkabel 433MHZ, jarak operasi nirkabel adalah 40 meter;
2. Adopt automatic frequency hopping function, use 32 sets of wireless remote controllers at the same time without affecting each other;
3. Mendukung tombol berhenti darurat, beralih keluaran sinyal IO, connected to the system through IO wiring;
4. Mendukung 4 tombol khusus, beralih sinyal IO, sinyal keluaran ke sistem melalui protokol IO-LINK;
5. Mendukung tombol gerakan cepat + dan tombol -, tekan dan tahan tombol untuk mengganti handwheel untuk menggerakkan mesin;
6. Mendukung kontrol 6 sumbu, beralih sinyal IO, sinyal keluaran ke sistem melalui protokol IO-LINK;
7. Support 1X,10X, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Catatan:
①Emergency stop button:
Tekan tombol berhenti darurat, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 tombol khusus, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Diagram aksesori produk

6.Panduan Instalasi Produk

6.1 Product Installation Steps

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Refer to our receiver wiring diagram, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3. After the receiver is fixed, antena yang dilengkapi dengan penerima harus terhubung,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Disarankan untuk meletakkannya di bagian atas kabinet listrik untuk efek sinyal terbaik. It
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Akhirnya, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 Dimensi pemasangan penerima

6.3 Diagram Referensi Pengkabelan Penerima

7. Pemeliharaan dan perawatan

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
kehidupan pelayanan;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Harap hindari meremas, jatuh, menabrak, dll.. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Jika tidak digunakan dalam waktu lama, harap simpan handwheel di tempat yang bersih dan aman;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Harap baca instruksi dengan seksama sebelum digunakan. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Jika perbaikan diperlukan, silakan hubungi produsennya. If the damage is caused by self-repair,
the manufacturer will not provide warranty.

]]> Handwheel elektronik nirkabel khusus Siemens XWGP-ETS https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Mungkin 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Pengenalan kendali jarak jauh

a.Produk Composinisiasi
Handwheel elektronik nirkabel tampilan koordinat real-time Siemens terdiri dari dua bagian: roda tangan elektronik + penerima;

b.Karakteristik

*Mendukung Siemens PLC: S7-200/-300/-1200；Mendukung tampilan nilai koordinat sistem Siemens secara real-time；
*Jarak transmisi nirkabel terbuka 40 meter, teknologi lompatan frekuensi otomatis, dapat menggunakan 32 set peralatan secara bersamaan;
*Roda tangan elektronik ditenagai oleh 2 Baterai AA dan dapat digunakan lebih dari 30 hari;
*Penerima dilengkapi dengan antena eksternal untuk meningkatkan sinyal dan mudah dipasang;
*Dukungan handwheel elektronik: satu pembuat enkode 100PPR 、satu sakelar pemilihan sumbu 6 kecepatan 、 satu sakelar pembesaran 3 kecepatan;
*Dukungan handwheel elektronik 6 tombol khusus, sesuai dengan alamat PLC Siemens, yang dapat diprogram secara bebas;

*6 tombol khusus dapat dikontrol 6 beralih output;
*Layar tampilan menampilkan nilai koordinat register yang sesuai dengan PLC secara real time, and supports 6-axis display of real-time coordinates.

2.Bidang aplikasi

Remote control CNC yang dapat diprogram banyak digunakan di berbagai bidang CNC seperti sistem pengukiran laser, Mesin Milling CNC, Pusat permesinan CNC, alat mesin gantri, dll.

3. Pengantar prinsip kerja

1） Handwheel elektronik terhubung ke PLC melalui penerima Ethernet

a.Roda tangan mengirimkan data kunci secara nirkabel ke penerima, dan penerima menulis kunci melalui area DB sistem kabel jaringan PLC; penerima membaca data yang akan ditampilkan dari area DB yang ditentukan, dan kemudian mengembalikan data ke layar tampilan handwheel. Pengguna dapat menyesuaikan alamat dasar area DB membaca dan menulis di handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

B. Penerima mendukung protokol Siemens S7. Berlaku untuk PLC S7-200, PLC S7-300 and PLC S7-1200.

C. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Dalam mode server, pengguna mengkonfigurasi alamat baca dan tulis PLC melalui perangkat lunak konfigurasi WGP-ETS;Gunakan alat konfigurasi koneksi PLC untuk mengkonfigurasi receiver ke mode klien. Setelah konfigurasi, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Aplikasi khusus

Aplikasi khusus penerima handwheel dan Siemens PLC S7-200:

A. Tombol pada handwheel sesuai dengan nilai area BOOL yang diatur oleh pengguna di PLC. Jika tombol handwheel ditekan, area BOOL yang sesuai adalah benar, dan kapan dirilis, itu salah, dan alamat dasar area BOOL dapat diatur melalui handwheel;

B. Handwheel dapat membaca nilai area DB pada PLC. Satu sumbu punya 4 byte data tampilan, Dan 6 sumbu memiliki total 24 byte. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Pengenalan penampilan

5.Definisi terminal penerima dan tabel pengkodean

6.Ukuran penampilan

 

 

]]>