1.Nmkpọ Okwu mmalite

Ihe mmemme na CNC dịpụrụ adịpụ phb06B dị mma maka ikuku
Ọrụ nchịkwa dịpụrụ adịpụ nke sistemụ CNC dị iche iche. Ọ na-akwado ndị ọrụ
Hazie Mmemme ma Zụlite bọtịnụ Iji Ghọta
njikwa ọrụ dị iche iche na sistemụ CNC; Ọ na-akwado ndị ọrụ
Hazie mmemme ma zụlite ọdịnaya iji ghọta dmami
Gosiputa onodu usoro; Njikwa dịpụrụ adịpụ na-abịa na nnweta
battery and supports Type-C interface charging.

2.Ngosipụta ngwaahịa

1. Iji teknụzụ nkwukọrịta 433mhz, Ọrụ ikuku
anya bụ 80 mize;
2. Iji ọrụ na-eme ngwa ngwa, 32 setịpụrụ nke ikuku ikuku
Enwere ike iji ndị na-achị achị n'otu oge ahụ na-emetụta ibe ha;
3. Onyenjideaka 12 Mbido akara omenala;
4. Nkwado 2.8-inch ihuenyo, Gosiputa mmemme omenala;
5. Onyenjideaka 1 6-Speed ​​Speed ​​Speed, nke nwere ike ịbụ nke a ga-eme;
6. Onyenjideaka 1 7-Mgbanwe ọsọ ọsọ, nke nwere ike ịbụ nke a ga-eme;
7. Onyenjideaka 1 elektrik aka, 100 pulses / ntụgharị;
8. Nchapdị na-akwụ ụgwọ; 5Nkọwapụta V-2A; batiri
specification 18650/12580mWh battery.

3.Ụkpụrụ ọrụ

4. Nkọwapụta ngwaahịa

5.Mmepe mmeghe nke ngwaahịa

Ndetu：
IWU EGO：
Njikwa aka iji mepee ma mechie

A na-ejikwa bọtịnụ abụọ：
A ga-enwerịrị bọtịnụ na-eme ka ọ na-enye aka;

Mpaghara bọtịnụ
12 Buttons haziri na 3x4, Mmemme akọwapụtara;

Nhọrọ ④arxis, ngbanwe ntụgharị
1 6-Denye nhọrọ axis, nke a ga - ahazi ya;
1 7-Ọnọdụ Radio, nke a ga - ahazi ya

Nkwụsị ihe mberede:
Mwepu Mwepu Mberede;

Mpaghara ⑥display:
Nwere ike igosipụta ike dị ugbu a, signal, na njirimara ngosipụta;

⑦electronic aka：
1 elektrik aka, 100 pulses/turn.

⑧charging ọdụ ụgbọ mmiri:

Batrị batrị, Chaged na-eji chaja na-eji, na-acha uhie uhie 5v,
Ugbu a 1a-2a; oge chaja 7 keolechi;

6.Ngwaahịa ngwa ahịa ngwaahịa

7.Ntuziaka nrụnye ngwaahịa

1. Fanye nnabata USB n'ime kọmputa, Kọmputa ahụ ga-akpaghị aka
Mara ma wụnye ngwaọrụ USB na-enweghị nrụnye ntuziaka;
2. Fanye na nchekwa dị na chaja. Mgbe batrị ahụ zuru oke, okporouzo
Na Mgbanwe Ike, tụgharịa na ebe nchekwa, na ngosipụta gosipụtara nkịtị, a
pụtara ike na-aga nke ọma;
3. Mgbe ọ gachara, You nwere ike ịrụ ọrụ ọ bụla. Ihe njikwa ime ahụ nwere ike
Kwado bọtịnụ bọtịnụ n'otu oge. Mgbe ị pịa bọtịnụ ọ bụla, oji
square ga-apụta n'akụkụ akara na akara dịpụrụ adịpụ, na-egosi na bọtịnụ
is valid.

8.Ntuziaka Ọrụ Ọrụ
Tupu mmepe ngwaahịa na ojiji, You nwere ike iji sọftụwia ngosi anyị na-enye nnwale
bọtịnụ na ngosipụta nke njikwa anya, ma ọ bụ jiri ngosi dị ka usoro ntinye aka
Mmepe mmemme nke ọdịnihu;
Tupu iji sọftụwia ngosi, Biko pịnye USB nnata USB n'ime kọmputa, ime
ijide n'aka na onye na-ahụ maka ya nwere ike zuru oke, Tụgharịa na-agbanwe ike, wee jiri ya;
Mgbe a na-agbanye bọtịnụ ọ bụla, ngosi sọftụwia ga-egosipụta nke ahụ
Ezi isiokwu. Mgbe ị hapụsịrị ya, Isi ihe ngosi bara uru na-apụ n'anya, na-egosi na
the button upload is normal.

9.Nchọpụta ngwa agha

10. Mmezi na nlekọta

1. Biko jiri ya na gburugburu na-enwe okpomọkụ na nrụgide dị oke ọkụ na-agbatị
Ndụ Ọrụ;
2. Ejila ihe dị iche iche iji metụ igodo igodo iji gbasaa ndụ nke igodo;
3. Biko debe mpaghara igodo ọcha iji belata uwe igodo;
4. Zere ịkatọ na ịdaba na-emebi emebi na njikwa anya;
5. Ọ bụrụ na ejighi ya ogologo oge, Biko wepu batrị ma chekwaa ikike di na ya
Batrị na ebe dị ọcha ma dị mma;
6. Pay attention to moisture-proof during storage and transportation.

11.Ozi Nchedo

1. Biko gụọ ntuziaka ahụ nke ọma tupu ojiji. Amachibidoro ndị na-abụghị ndị aka
from operating.
2. Biko jiri chaja mbụ ma ọ bụ chaja na-emepụta nke ya
the same specifications.
3. Biko kwụọ ụgwọ n'oge iji zere ọrụ ezighi ezi n'ihi ike ezughi oke na-akpata
the remote control to be unresponsive.
4. Ọ bụrụ na achọrọ mmezi, Biko kpọtụrụ onye nrụpụta. Ọ bụrụ na mmebi ahụ kpatara
Nhazi Onwe, the manufacturer will not provide warranty.

1.Nmkpọ Okwu mmalite

The programmable CNC remote control PHB10 is suitable for wireless
Ọrụ nchịkwa dịpụrụ adịpụ nke sistemụ CNC dị iche iche. It supports user-defined
programming to develop button functions, and realize remote control of various
functions on the CNC system; it supports user-defined programming to develop
LED lights to light up and turn off, and realize dynamic display of system status;
the remote control comes with a rechargeable battery and supports Type-C
interface charging.

2.Ngosipụta ngwaahịa

1. Iji teknụzụ nkwukọrịta 433mhz, Ọrụ ikuku
anya bụ 80 mize;
2.Iji ọrụ na-eme ngwa ngwa, 32 setịpụrụ nke ikuku ikuku
Enwere ike iji ndị na-achị achị n'otu oge ahụ na-emetụta ibe ha;
3.Onyenjideaka 32 Mbido akara omenala;
4.Onyenjideaka 9 custom LED light display programming;
5.Support IP67 waterproof level;
6.Support standard Type-C interface charging; 5Nkọwapụta V-2A;
1100 mAh large capacity battery, with automatic sleep standby function; realize
ultra-long low power standby;
7.Support real-time display of power.

3.Ụkpụrụ ọrụ

4. Nkọwapụta ngwaahịa

5.Mmepe mmeghe nke ngwaahịa

Ndetu：
①Battery level display：
Lights up after power on, turns off after power off;
If the battery indicator light is only one bar and keeps flashing, it means the
battery is too low. Please replace the battery;

If the battery indicator lights are all on and the other LED lights flash back and
forth, it means the battery is very low. Please replace the battery;
If the battery indicator does not light up or go out, and the device cannot be
started by pressing and holding the power button, Biko dochie batrị;

②Button area：32 buttons arranged in 4X8, Mmemme akọwapụtara;

③Status LED：
COMMU: Button indicator light, lights up when the button is pressed and goes
out when the button is released; other lights are custom displays;

④Power switch：
Long press for 3 seconds to turn on, long press for 3 seconds to turn off;
⑤Charging port：
Use Type-C charger to charge, na-acha uhie uhie 5v, Ugbu a 1a-2a; charging
time 3-5 keolechi;

When charging, the power indicator flashes, indicating that it is charging. When
fully charged, the power indicator will show full bar without flashing.

6.Ngwaahịa ngwa ahịa ngwaahịa

7.Ntuziaka nrụnye ngwaahịa

1 . I nsert the USB receiver into the computer, Kọmputa ahụ ga-akpaghị aka
recognize and install the USB device driver without manual
2. Fanye na nchekwa dị na chaja. Mgbe batrị ahụ zuru oke, press
and hold the power button for 3 seconds. The remote control will turn on and the power
indicator will light up, indicating that the power-on is successful.
3. Mgbe ọ gachara, You nwere ike ịrụ ọrụ ọ bụla. The remote control
can support dual button operation at the same time. Mgbe ị pịa bọtịnụ ọ bụla, oseihe nwaanyi
COMMU light on the remote control will light up, indicating that this button is valid.

8.Ntuziaka Ọrụ Ọrụ
Tupu mmepe ngwaahịa na ojiji, you can use the demo software we provide to
test the buttons on the remote control and the LED light on the remote control. You can
also use the demo as a reference routine for future programming development.
Tupu iji sọftụwia ngosi, Biko pịnye USB nnata USB n'ime kọmputa,
make sure the remote controller has sufficient power, press and hold the power button to t
urn it on, wee jiri ya;
Mgbe a na-agbanye bọtịnụ ọ bụla, the test software demo will display
the corresponding key value. Mgbe ị hapụsịrị ya, Isi ihe ngosi bara uru na-apụ n'anya,
indicating that the key upload is normal;
You can also select the LED light number on the test software demo, click download,
and the corresponding light number on the remote control will light up, indicating that the
LED light is downloading normally.

9.Nchọpụta ngwa agha

10. Mmezi na nlekọta

1. Biko jiri ya na gburugburu na-enwe okpomọkụ na nrụgide dị oke ọkụ na-agbatị
Ndụ Ọrụ;
2. Ejila ihe dị iche iche iji metụ igodo igodo iji gbasaa ndụ nke igodo;
3. Biko debe mpaghara igodo ọcha iji belata uwe igodo;
4. Zere ịkatọ na ịdaba na-emebi emebi na njikwa anya;
5. Ọ bụrụ na ejighi ya ogologo oge, please remove the battery and store the remote control
and battery in a clean and safe place;
6. Pay attention to moisture-proof during storage and transportation.

11.Ozi Nchedo

1. Biko gụọ ntuziaka ahụ nke ọma tupu ojiji. Amachibidoro ndị na-abụghị ndị aka
operating.
2. Please use the original charger or a charger produced by a regular manufacturer with the
same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing the
remote control to be unresponsive.
4. Ọ bụrụ na achọrọ mmezi, Biko kpọtụrụ onye nrụpụta. Ọ bụrụ na mmebi nke onwe,
the manufacturer will not provide warranty.