Akwụkwọ ntuziaka na-enye nkwado

xia xiaoqin — Wed, 05 Nov 2025 06:13:13 +0000

1. Nmkpọ Okwu mmalite

Electronic handwheel is used for manual guidance, Iche, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, ogo, buttons, andother signals through communication.

2.Product functional features

1. Jiri 6-core avition Plug ga-eriri maka njikọ, jiri nwayọ nwayọ 10 meters.

2. Ihuenyo dị mma nwere ike igosipụta usoro nhazi ụlọ ọrụ, Nchịkọta Nhazi,Nri nri, Nhọrọ Axis, ogo, and other information.

3. Kwadebe bọtịnụ Mberede, Gbanwee Ntanetị Ntanetị, and the hand wheel shutdown emergency stop is still valid.

4. Na-akwado 6 bọtịnụ omenala, Gbanwee akara io, and can output signals to the system through IO wiring or communication.

5. Na-akwado 6 ma ọ bụ 8 Njikwa Axis, with switch IO signals that can be output to the system through IO wiring or communication.

6. Na-akwado 3 ma ọ bụ 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.

7. Support pulse encoder, 100 pulses / ntụgharị, can output signals to the system through AB pulse wiring.

8. Supports Siemens S7 protocol and Siemens 828D, 840Dil, ONE and other model systems.

3. Nkọwapụta ngwaahịa

Handwheel working power supply voltage	DC24V/1A
Receiver power supply voltage	DC24V/1A
Receiver IO output load range	DC24V
Hand wheel end cable length	10m
Receiver end cable length	1m
Receiver end network cable length	3m
Operating temperature	-25℃
Anti-fall height	1m
Custom Button Quantity	6
Product dimensions	23390.777.4（mm）

4.Mmepe mmeghe nke ngwaahịa

Dee:

Emergency stop button:

Pịa bọtịnụ Mkpuchi mberede, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.

After releasing the emergency stop, Mberede na-akwụsị ihe na-emepụta na onye na-anabata ya, and all functions of the handwheel are restored.

② Screen display:

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.

PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.

③ Custom button:

6 bọtịnụ omenala, each corresponding to an IO output point on the receiver, also connected to the system through communication.

④ Axis selection switch:

The axis selection switch can switch the movement axis controlled by the handwheel.

⑤ Enable button:

Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.

⑥ Magnification switch:The magnification switch can switch the magnification

controlled by the handwheel.

⑦ Pulse encoder:

Pịa ma jide bọtịnụ Kwado, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.

⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Product accessory diagram

6. Ntuziaka nrụnye ngwaahịa
6.1 Product installation steps

1. Install the receiver into the electrical cabinet through the screw holes at the four corners.

2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.

3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

6.2 Mpaghara nnabata

6.3 Installation dimensions of aviation plugs

6.4 Onye na-anabata onyinye
7.Ntuziaka Ọrụ Ọrụ

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.

5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.

6. Họrọ Extinification: Switch the magnification switch and select the magnification level you need.

7. Na-agagharị axis: Pịa ma jide bọtịnụ Kwado, Họrọ Ntinye Axis, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.

9. Pịa bọtịnụ Mkpuchi mberede, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.

8.Nkọwapụta Ngwaahịa Ngwaahịa

① LXWGP represents a wired appearance style, and the receiver communication interface

is an Ethernet interface.

② : Represents Siemens system specific.

③ : na-anọchite anya ọnụọgụ nke nhọrọ axis, represents axes, and represents

axes.

④ : represents the type of axis selection and magnification signal, A represents

point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Maintenance

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.

3. Please keep the appearance of the handwheel clean to extend its service life.

4. Biko zere ịkacha, ida, iferi, wdg. to prevent damage to the precision components inside the handwheel or accuracy errors.

5. Ọ bụrụ na ejighi ya ogologo oge, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.

11. Ozi Nchedo

1. Please read the instructions carefully before use and prohibit non professionals from operating.

2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;

3. Ọ bụrụ na achọrọ mmezi, Biko kpọtụrụ onye nrụpụta. Ọ bụrụ na mmebi nke onwe, Onye na-emepụta ahụ agaghị enye akwụkwọ ikike

Na-enweghị ike – Hexhc Teknụzụ

Akwụkwọ ntuziaka na-enye nkwado