Ngwa a kapịrị ọnụ maka Siemens – Hexhc Teknụzụ https://www.wixhc.cn Industry Leader Wed, 05 Nov 2025 06:21:59 +0000 ig hourly 1 https://wordpress.org/?v=6.8.3 Akwụkwọ ntuziaka na-enye nkwado https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Nmkpọ Okwu mmalite

Electronic handwheel is used for manual guidance, Iche, ntinyeaka, na arụmọrụ ndị ọzọ na ngwaọrụ igwe CNC. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, ogo, buttons, andother signals through communication.
2.Njirimara arụmọrụ
1. Jiri 6-core avition Plug ga-eriri maka njikọ, jiri nwayọ nwayọ 10 meters.
2. Ihuenyo dị mma nwere ike igosipụta usoro nhazi ụlọ ọrụ, Nchịkọta Nhazi,Nri nri, Nhọrọ Axis, ogo, and other information.
3. Kwadebe bọtịnụ Mberede, Gbanwee Ntanetị Ntanetị, and the hand wheel shutdown emergency stop is still valid.
4. Na-akwado 6 bọtịnụ omenala, Gbanwee akara io, and can output signals to the system through IO wiring or communication.
5. Na-akwado 6 ma ọ bụ 8 Njikwa Axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Na-akwado 3 ma ọ bụ 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Nkwado Pluner, 100 pulses / ntụgharị, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840Dil, ONE and other model systems.

 

3. Nkọwapụta ngwaahịa
Handwheel working power supply voltage DC24V/1A
Onye na-anabata ike na-enye ọkụ ọkụ DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10m
Receiver end cable length 1m
Receiver end network cable length 3m
Operating temperature -25℃<Nke X<55℃
Anti-fall height 1m
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Mmepe mmeghe nke ngwaahịa

Dee:
Emergency stop button:
Pịa bọtịnụ Mkpuchi mberede, na usoro abụọ a na-eme na mberede na-emepụta ihe na nnata ga-ahapụ, and all functions of the handwheel will be invalid.
After releasing the emergency stop, Mberede na-akwụsị ihe na-emepụta na onye na-anabata ya, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 bọtịnụ omenala, onye ọ bụla kwekọrọ na isi ihe mmepụta ihe na onye na-anabata ya, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Pịa ma jide bọtịnụ Kwado, Ikwuputa onye isi, Emit Njirimara, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Ihe eserese ngwaahịa

6. Ntuziaka nrụnye ngwaahịa
6.1 Nzọụkwụ nrụnye Ngwaahịa
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Na-ezo aka na eserese na-anata ego na-eweta ego ma jiri ya tụnyere akụrụngwa saịtị gị. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Mpaghara nnabata

6.3 Installation dimensions of aviation plugs

6.4 Onye na-anabata onyinye
7.Ntuziaka Ọrụ Ọrụ

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Họrọ Extinification: Switch the magnification switch and select the magnification level you need.
7. Na-agagharị axis: Pịa ma jide bọtịnụ Kwado, Họrọ Ntinye Axis, Họrọ Mgbanwe Mgbapụta, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Pịa bọtịnụ Mkpuchi mberede, Mberede na-akwụghị ụgwọ Mberede na-emepụta nke onye na-anabata ya, A ga-enwe nkwarụ, Hapụ bọtịnụ Mberede, A ga-emechi ihe mberede ihe mberede, and the handwheel function will be restored.
8.Nkọwapụta Ngwaahịa Ngwaahịa

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : na-anọchite anya ọnụọgụ nke nhọrọ axis, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Maintenance
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Biko zere ịkacha, ida, iferi, wdg. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ọ bụrụ na ejighi ya ogologo oge, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Ozi Nchedo

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Ọ bụrụ na achọrọ mmezi, Biko kpọtụrụ onye nrụpụta. Ọ bụrụ na mmebi nke onwe, Onye na-emepụta ahụ agaghị enye akwụkwọ ikike

 

]]> Wirelited Wireless maka CNC Vetical Lathe https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Nmkpọ Okwu mmalite

A na-eji ya raara onwe ya nye WinT na-enweghị isi maka CNC Vetikal na-eji maka ntuziaka ntuziaka, Iche, mwube ngwaọrụ, Na ọrụ ndị ọzọ na ngwaọrụ igwe CNC vetikal. Ngwaahịa a na-eme teknụzụ nnyefe ikuku ikuku, na-ewepụ mkpa ọ dị maka njikọ mmiri nke oge opupu ihe ubi, na -ebelata ọdịda akụrụngwa kpatara, na iwepụ ọghọm nke eriri na igwe anụ ahụ, Ime ka ọrụ dị mfe karị. Ọ bụ ihe dị iche iche na-agbanwe agbanwe dị ka CNC vetikal, otu kọlụm vetical lotical, na kọlụm abụọ vetical lathes.it nwekwara ike imeghari n'usoro dị iche iche na ahịa, dị ka Siemens,
Mitsubishi, Gopia, and Syntec.

2. Njirimara arụmọrụ

1. Ime 433 Ngalaba nkwukọrịta MHZ ikuku, ya na ikuku na-enweghị isi 40 meters.
2.Na-arụ ọrụ na-arụ ọrụ na-arụ ọrụ na 32 setịpụrụ ndị na-ahụ maka ndị na-ahụ maka ndị na-ahụ maka ọdịmma, without affecting each other.
3. Kwadebe bọtịnụ Mberede, switch IO signal output.
4. Na-akwado 2 nhọrọ ọdịnala, with switch-type IO signal output.
5. Na-akwado -2 axis control.
6. Supports 3-level magnification control.
7. Kwado ọrụ bọtịnụ, nke nwere ike imepụta / gbanyụọ io ma na-achịkwa nhọrọ axis, na-abawanye ihe, na itinye.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Na-akwado ihe nnabata, ya na nkọwapụta nke 100 pulses per revolution.
3. Nkọwapụta ngwaahịa
Igwe ọkụ na nke ugbu a
3V / 14ma
Nkọwapụta batrị 2 Asa Alkaline, size 5
Ọnọdụ ọkụ eletrik dị ala < 2.3V
Onye na-anabata ike na-enye ọkụ ọkụ Dc5v-24V / a
Mberede na-akwụ ụgwọ Mberede na-akwụsị Ac125v-1A / DC30V-2A
Nnata na-eme ka ibu ọrụ
Ac125v-1A / DC30V-2A
Ntanetị bọtịnụ Ntanetị Ntanetị Dc24v / 50ma
Nnata Axis Nhọrọ Nhazi Dc24v / 50ma
Nta dị nkọ nrịba Dc24v / 50ma
Ike nnyefe nke eriri aka
15dum
Nnata na-anata uche -100dum
Nkwukọrịta nkwukọrịta ikuku 433Mhz ugboro ugboro
Nkwukọrịta ikuku Ihe mgbochi 40 mize
Ime ihe nke okpomoku -25℃ < Nke X < 55℃
Mgbochi ọdịda 1 (mita)
Obere akara 2
4. Mmepe mmeghe nke ngwaahịa



Ndetu:

① Pructoder:
Pịa ma jide bọtịnụ Kwado, Ikwuputa onye isi, Emit Njirimara,and control the movement ofthe machine axis.
Mee bọtịnụ:
Pịa ma ọ bụ bọtịnụ na akụkụ abụọ, na usoro abụọ nke iji mee ka ihe ngosi ga-eduzi. Hapụ bọtịnụ na-eme ka ị ga-ewepụ ihe na-enyere gị aka; Na tupu ịgbanwee nlụghe nhọrọ axis ma na-ama jijiji,bọtịnụ Kwado dị mkpa ka a ga-eme ka ọ dị irè; This function can be cancelled through configuration software.

③ ọkụ ọkụ:
Aka ekpe: ike na ọkụ,Akara ahụ na-eji Axis iji họrọ maka ike na, na Ìhè a na-anọgide na mgbe ike na;
Etiti ìhè: ọkụ na-enwu enwu na-arụ ọrụ mgbe ị na-arụ ọrụ ọ bụla nke aka, ọ dịghịkwa ọkụ mgbe ọ na-enweghị ọrụ;
Efere nri: Ọkụ voltaji dị ala, ọkwa batrị dị ala,ọkụ a ma ọ bụ nọrọ na ya, battery needs to be replaced.

Igwe nkwụsị mberede:
Pịa bọtịnụ Mkpuchi mberede, na usoro abụọ a na-eme na mberede na-emepụta ihe na nnata ga-ahapụ, and all functions of the handwheel will be invalid.

Idighi ike:
Pịa ma jide bọtịnụ na-enyere aka ịgbanwee mgbatị ahụ, which can switch the magnification controlled by the handwheel.

⑥ Axis Nhọrọ (Ike Mgbapụta):
Pịa ma jide bọtịnụ na-enyere aka ịgbanwee nzọpụta nhọrọ axis, nke nwere ike ịgbanyụgharị axis axis na-achịkwa site na aka. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Auty na-ejikọ:
A na-akụ abụọ, each corresponding to an IO output point on the receiver.

5. Ihe eserese ngwaahịa

6. Ntuziaka nrụnye ngwaahịa
6.1 Nzọụkwụ nrụnye Ngwaahịa

1. Wụnye onye na-anabata ya na ọdụ eletrik site na nkwakọ na azụ, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Na-ezo aka na eserese na-anata ego na-eweta ego ma jiri ya tụnyere akụrụngwa saịtị gị. Connect the equipment to the receiver via cables.
3.Mgbe a nabatara ya nke ọma, Antenna nwere a ga-ejikọ onye na-anabata ya, na njedebe nke Antenna a ga-arụnyere ma ọ bụ tinye ya n'èzí kabinet. A na-atụ aro idobe ya n'elu ebe eletriki maka mmetụta kachasị mma. A machibidoro ya ịhapụ antenna a na-achịkwa ma ọ bụ tinye ya n'ime kabinet, as this may result in the signal being unusable.
4. N'ikpaazu, Tụgharịa na ike ọkụ nke aka, and you can operate the machine remotely using the handwheel.

6.2 Mpaghara nnabata

6.3 Onye na-anabata onyinye

7. Ntuziaka Ọrụ Ọrụ
1. Ike na igwe na onye nata ya. Onye na-anabata ya na-egosi na-egosi ìhè. Wụnye batrị na ngwa elektrọnik, Chekwaa mkpuchi batrị, na
gbanye ngwa mgbakwunye ikuku na-enweghị ike. The handwheel’s battery level indicator light is on.
2. Họrọ nhazi axis: Pịa ma jide bọtịnụ Kwado, Gbanwee usoro nzọpụta Axis, and select the axis you want to operate.
3. Họrọ Extinification: Pịa ma jide bọtịnụ Kwado, Gbanwee ndọlite ​​ngbanwe,and select the desired magnification level.
4. Na-agagharị axis: Pịa ma jide bọtịnụ Kwado, Họrọ Ntinye Axis, Họrọ Mgbanwe Mgbapụta, wee bugharia ndi isi okwu. Na-atụgharị elekere iji kwaga
positive axis and counterclockwise to move the negative axis.
5. Pịa ma jide bọtịnụ omenala ọ bụla, na bọtịnụ nke kwekọrọ Io na-emepụta nke onye na-anabata ya ga-atụgharị. Hapụ bọtịnụ, and the output will be turned off.
6. Pịa bọtịnụ Mkpuchi mberede, Mberede na-akwụghị ụgwọ Mberede na-emepụta nke onye na-anabata ya, A ga-enwe nkwarụ,Hapụ bọtịnụ Mberede, A ga-emechi ihe mberede ihe mberede, and the handwheel function will be restored.
7. Ọ bụrụ na anaghị arụ ọrụ maka oge, Ọ ga-abanye na-ehi ụra na-akpaghị aka iji belata oriri ike. Mgbe ejiri ya ọzọ, the handwheel can be activated by pressing the enable button.
8. Ọ bụrụ na ejighị aka ahụ ogologo oge, A na-atụ aro ka ịgbanwee akara aka na ọnọdụ ahụ, Gbanyụọ ike, and extend the battery life.

8. Nkọwapụta Ngwaahịa Ngwaahịa

① :Ztwgp na-anọchite anya ụdị ahụ
②：Pullet Mmepụta:
01: Na-egosi na mgbama nrụpụta bụ, B; Pount voltaji 5v; pulse quantity 100PPR.
02：Na-egosi na ọgbụgba ahụ na-eme ka ọ na-eweta; Pult voltava 12v; pulse quantity 100PPR.
03：Na-egosi na ọgbụgba ahụ bụ, B, A -, B -; Pount voltaji 5v; pulse quantity 100PPR.
04：Na-egosiputa ngbanye NPN dị ala, ya na mgbaàmà mmepụta nke a na b;The number of pulses is 100PPR.
05：Na-egosiputa ihe ngosi pnp dị elu, ya na mgbaàmà mmepụta nke a na b; The number of pulses is 100PPR.
③：Na-anọchi anya ọnụ ọgụgụ nke Nhọrọ Axis, 2 na-anọchite anya 2 axes.
④：Na-anọchite anya ụdị nhọrọ nhọpụta Axis, Ihe na-anọchite anya akara ngosi, and B represents encoded output signal.
⑤：Na-anọchite anya ụdị ọtụtụ mgbama, Ihe na-anọchite anya akara ngosi, and B represents encoded output signal.
⑥：Na-anọchite anya ọnụọgụ nke bọtịnụ ọdịnala, 2 na-anọchite anya 2 custom buttons.
⑦：Na-anọchite anya ike ọkọnọ maka akara aka, na 05 represents 5V power supply.
⑧：L na-anọchite anya kọlụm ekpe (Ghin Gonfe), ma na-anọchite anya kọlụm aka nri (Njikwa mma).

9.Ngwọta nke ngwaahịa na-arụ ọrụ

10. Mmezi ngwaahịa

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Biko zere ịkacha, ida, iferi, wdg. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ọ bụrụ na ejighi ya ogologo oge, Biko debe aka na ebe dị ọcha ma dị mma. N'oge nchekwa na njem, attention should be paid to moisture and shock resistance.

11. Ozi Nchedo

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Ọ bụrụ na achọrọ mmezi, Biko kpọtụrụ onye nrụpụta. Ọ bụrụ na mmebi nke onwe, Onye na-emepụta ahụ agaghị enye akwụkwọ ikike

]]> Androuc raara onwe ya nye Withyronic aka https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Mee 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Nmkpọ Okwu mmalite

A na-eji ngwa eletrik na-adịghị mma maka ntuziaka ntuziaka, Iche, ntinyeaka,na arụmọrụ ndị ọzọ na ngwaọrụ igwe CNC. Ngwaahịa a na-eme teknụzụ nnyefe ikuku ikuku, na-ewepụ njikọ ọdịnala nke usoro ọdịnala, na -ebelata ọdịda akụrụngwa kpatara, Iwepu ọghọm nke eriri na-adọkpụ, na-eme ka ọrụ ọzọ rụọ ọrụ. Ihe nlereanya nke ngwa eletriki a bụ aka raara onwe ya nye maka schuc Sistem. A na-egosipụta njikọta sistemụ nchekwa na oge n'ezie na ihuenyo aka site na usoro nke IO-Link, na nhọrọ axis,ogo, A na-ejikọ akara bọtịnụ na-ejikọ na sistemụ ahụ site na usoro nke IO-Link, reducing wiring.

2. Ngosipụta ngwaahịa
1. Igwe teknụzụ 433mhz Ikuku, Ikuku ikuku dị 40 mize;
2. Na-arụ ọrụ na-arụ ọrụ na-arụ ọrụ, mwere 32 setịpụ ndị na-ahụ maka ndị na-ahụ maka ikuku na-enweghị ọrụ na-emetụta ibe ha;
3. Kwadebe bọtịnụ Mberede, Gbanwee Ntanetị Ntanetị, ejikọtara na sistemụ site na io Wirering;
4. Onyenjideaka 4 bọtịnụ omenala, Gbanwee akara, Mmepụta Nwepụta na Sistem Site na Usoro Nook Io;
5. Kwado bọtịnụ Mmegharị + na bọtịnụ -, Pịa ma jide bọtịnụ iji dochie aka iji kwagharịa igwe ahụ;
6. Nkwado 6-Axis Njikwa, Gbanwee akara, Mmepụta Nwepụta na Sistem Site na Usoro Nook Io;
7. Nkwado 1x,10nke X, 100Njikwa X . Nkwado na-agbany ọsọ l0, na ntinye aka na usoro site na usoro nke io;
8. Nkwado na-enyere ọrụ bọtịnụ, Jikọọ na sistemụ site na io Wirering, na njikwa akara aka n'otu oge;
9. Nkwado Pluner, 100 pulses / okirikiri, Nweta usoro MPG MPG;

3.Nkọwapụta ngwaahịa

4.Ngosipụta ngwaahịa

Ndetu:
Bọtịnụ nkwụsị:
Pịa bọtịnụ Mkpuchi mberede, Ihe mberede ahụ na-eme na-akwụsị na-emepụta ihe na nnata ahụ, A na-ewepụta ọrụ niile na-arụ ọrụ bụ nke na-adịghị mma, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

Ngosipụta ②SCreen:

Bọtịnụ ③Custom:
4 bọtịnụ omenala, Ọ bụla bọtịnụ ọ bụla kwekọrọ na ebe a na-eme ihe, ejikọtara na usoro site na iolink. Jenaral, the ~ button is set as a high-speed button.
Ngbanwe ④AXIS:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
Bọtịnụ ⑤Shortcut:
Pịa bọtịnụ mkpirisi "+ iji kwaga igwe ahụ n'ihu, ma pịa bọtịnụ mbelata "-" ịkwaga igwe ahụ na-adịghị mma. This can replace turning the hand wheel to move the machine.
Bọtịnụ ⑥aable:
Pịa ma jide otu n'ime akụkụ ọ bụla na-enyere gị aka na akụkụ abụọ ma maa jijiji ma maa jijiji. Na ndị otu abụọ nke na-enyere Io nsonaazụ na onye na-anabata ya. Release the enable button and the enable IO output is disconnected.
⑦ratio Gbanwee:
Switching the magnification switch can switch the magnification of handwheel control.
⑧puulse couser:
Pịa ma jide bọtịnụ Kwado ma maa jijiji
signal to control the movement of the machine axis.
IWU EGO:
Handwheel power button.

5.Ngwaahịa ngwa ahịa ngwaahịa

6.Ntuziaka nrụnye ngwaahịa

6.1 Nzọụkwụ nrụnye Ngwaahịa

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Na-ezo aka na eserese na-anabata ihe, Jiri ya tụnyere akụrụngwa saịtị gị, ma jikọọ
the equipment to the receiver via cables.
3. Mgbe a nabatara ya, Antenna nwere a ga-ejikọ onye na-anabata ya,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
A na-atụ aro idobe ya n'elu ebe eletriki maka mmetụta kachasị mma. Ya
amachibidoro ịhapụ antenna a na-achịkwa ma ọ bụ tinye antenna n'ime kabinet eletrik,
which may cause the signal to be unusable.
4.N'ikpaazu, Gbanyụọ ike ịgbanwee ike ma ị rụọ ọrụ igwe site na
handwheel remote control.

6.2 Mpaghara nnabata

6.3 Onye na-anabata onyinye

7. Mmezi na nlekọta

1. Biko jiri ya na akọrọ na-enwe ọnọdụ okpomọkụ na nrụgide na-agbatị
Ndụ Ọrụ;
2. Biko zere iji ya na gburugburu ebe obibi dị ka mmiri ozuzo na mmiri mmiri na-agbatị
Ndụ Ọrụ;
3. Biko mee ka akara aka dị ọcha iji gbasaa ndụ ọrụ ahụ;
4. Biko zere ịkacha, ida, iferi, wdg. Iji gbochie mmebi nke akụkụ
N'ime aka ma ọ bụ mee ka njehie a na-ekwu okwu;
5. Ọ bụrụ na ejighi ya ogologo oge, Biko debe aka na ebe dị ọcha ma dị mma;
6. Pay attention to moisture and shock during storage and transportation.

8. Ozi Nchebe

1. Biko gụọ ntuziaka ahụ nke ọma tupu ojiji. Amachibidoro ndị na-abụghị ndị aka
operating.
2. Biko dochie batrị ka batrị dị obere iji zere njehie kpatara
insufficient power causing the handwheel to be unable to operate.
3. Ọ bụrụ na achọrọ mmezi, Biko kpọtụrụ onye nrụpụta. Ọ bụrụ na mmebi nke onwe,
the manufacturer will not provide warranty.

]]> Siemens raara onwe ya nye Wireless Wirely xwgp-ets https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Mee 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Okwu Mmalite nke Ime Obodo

a.ploductoc composoon
Siemens na-egosipụta ngwa ngwa na-egosipụta ngwa eletrọniki na-enwe ike mejupụtara akụkụ abụọ: elektrik aka + onye nnata;

b.Charactoctoctocts

*Nkwado Siemens PLC: S7-200 / -300 / -1200；Na-akwado ezigbo ngosipụta nke Simens nhazi；
*Igwe ikuku ikuku na-emeghe 40 mize, Automatic Future Technity Teknụzụ, nwere ike iji 32 usoro akụrụngwa n'otu oge;
*A na-akwado ngwa eletrik site na 2 AA batrị ma enwere ike iji ya karịa 30 ubochi;
*Onye na-anabata ya na antenna dị mpụga iji kwalite akara ma dị mfe ịwụnye;
*Nkwado Nlekọta Electronic: Otu 100pprcoder 、otu uzo uzo uzo ato 、 otu ụzọ mgbago ọsọ ọsọ;
*Electronic na-akwado 6 bọtịnụ omenala, kwekọrọ na adreesị nke Siemens PLC, nke nwere ike ịme mmemme n'efu;

*6 Bultons nwere ike ịchịkwa 6 Gbanwee nsonaazụ;
*Ihuenyo ngosipụta na-egosiputa PLC kwekọrọ na ịhazi aha ọma ozugbo, and supports 6-axis display of real-time coordinates.

2.Ubi

A na-ejikarị njikwa CNC mmemme na mpaghara CNC dị ka usoro, Ngwaọrụ CNC, CNC KPST Center, Ngwaọrụ igwe Gantry, wdg

3. Okwu Mmalite nke ụkpụrụ na-arụ ọrụ

1) Ejikọtara eletriki na-ejikọ na plc site na nnata ethernet

A.Endwheel na-ebunye data igodo ikuku na onye na-anabata ya, na onye na-anabata ya na-ede igodo ahụ site na eriri USB nke sistemụ igwe DB mpaghara; Onye na-anabata ya na-agụ data ahụ iji gosipụta site na mpaghara DB, ma weghachi data na ihuenyo ngosipụta. Onye ọrụ ahụ nwere ike hazie isi okwu nke ọgụgụ na ide ihe DB na aka, so that the handwheel can read and write the data in the DB area of the PLC.

b. Onye na-anabata ya na-akwado protocol S7. Na-emetụta plc s7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Na Ọnọdụ Server, Onye ọrụ na-ahazi PLC Gụọ ma dee adres site na ngwanrọ nke WGP-Ets;Jiri Ngwá Ọrụ Ntọala PLC iji hazie onye na-anabata ya na ọnọdụ ndị ahịa. Mgbe nhazi, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Ngwa ụfọdụ

Ngwa doro anya nke nnata na Siemens PLC S7-200:

a. Bọtịnụ dị na aka aka kwekọrọ na uru nke mpaghara bool setịpụrụ nke onye ọrụ na PLC. Ọ bụrụ na bọtịnụ nke aka ahụ, Mpaghara bool kwekọrọ bụ eziokwu, na mgbe ahapụpụtara ya, Ọ bụ ụgha, Enwere ike ịtọ ntọala ụlọ nke mpaghara bool site na aka;

b. Akara ahụ nwere ike gụọ uru nke mpaghara DB na PLC. Otu axis nwere 4 site na data ngosipụta, na 6 axes nwere ngụkọta nke 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Nsịlite ọdịnala

5.Nkọwapụta Ntanetị Ntanetị na tebụl code

6.Nha

 

 

]]>