Waya ụgbọala waya na-egbu egbu

Nkowa

1. Nmkpọ Okwu mmalite
The crawler vehicle rope saw automatic cutting remote control is suitable for crawler rope saw cutting machines. It adopts 485ModbusRTU protocol to control the speed start and front and rear left and right direction control of the left and right crawler inverters, as well as the large motor frequency conversion RTU protocol to control the speed start and front and rear left and right direction control of the left and right crawler inverters, and the large motor frequency conversion over-current analysis and comparison, automatically adjust the left and right crawler speeds in real time to achieve automatic cutting function.

2. Ngosipụta ngwaahịa
1. Igwe teknụzụ 433mhz Ikuku, Ikuku ikuku dị 100 mize.
2. Na-arụ ọrụ na-arụ ọrụ na-arụ ọrụ, mwere 32 sets of wireless remote controllers at the same time, Na-enweghị mmetụta na ibe ya.
3. Support all inverters with 485-Modbus RTU protocol. The inverter brands that have been adapted include:Shanghai Xielin, Fuji, Inovance, Zhongchen, Ikpo mmeputa, Anchuanda. If the brand is not ada please contact us for customization.
4. Support large motor inverter start, speed regulation, and current reading.
5. Support left and right crawler inverter speed regulation, start, front and back left and right control.
6. Support left and right crawler inverter straight line correction to keep the machine moving in a straight line.
7. Support rope saw automatic cutting function, automatically adjust the left and right crawler speed in real time according to the large motor current information.
8. N'otu oge ahụ, it is compatible with direct IO output to control the start and stop of the motor, and analog voltage output to control the motor speed.

3. Nkọwapụta ngwaahịa

4. Mmepe mmeghe nke ngwaahịa

Ndetu:
Ngosipụta ①SCreen:

②mode ngbanwe:
Using a 2-level switch, it is possible to switch between automatic and manual modes, and the corresponding mode will be displayed on the screen for switching.
③ Enable:
Bọtịnụ ngwakọta, Fọdụ arụmọrụ chọrọ ijide bọtịnụ Kwado maka ọrụ, please refer to the instructions for each switch for details.
④ Large motor switch:
Na-eji usoro nrụpụta ọsọ 3, na-adọta ngbanwe a nwere ike ịchịkwa mbugharị na ntụgharị nke nnukwu moto. Mgbe ị hapụsịrị ya, Steeti ga-adịgide, A ga-enwekwa ngosipụta kwekọrọ na enyo. The t arrow indicates forward rotation, and the y arrow indicates reverse rotation.
⑤small moto nche / ngbanwe:
Using a 3-speed self-locking switch, pulling this switch can control the small motor to move forward and backward. The corresponding display will show on the screen, with the t arrow indicating forward and the ↓ arrow indicating backward.
⑥Remote control power switch:
Ihuenyo na-egosipụta ihuenyo na-egosi.
⑦ small motor turning switch:
Na-eji usoro nrụpụta ọsọ 3, Mgbe ejiri aka ya rụọ ọrụ, Enwere ike ịchịkwa obere moto ahụ ka ọ tụgharịa aka ekpe ma ọ bụ aka nri. Ozugbo ewepụtara, the remote control will automatically stop this action.When in the forward state, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, na – arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, na – arrow indicates right turn.Press and hold the enable button, then turn this switch to perform a stationary turning function, making the turn faster.
⑧ nnukwu moto ngwa ngwa:
Na-eji ọtụtụ ntụgharị aka, rotate the knob to adjust the speed S1 of the large motor For every 1 grid rotation, uru ọsọ nke nnukwu nsogbu na-agbanwe 0.2 nkeji iri, and rapid rotation can quickly modify the speed value of the large motor.
9 Small motor speed regulation (linear correction):To use the multi turn encoder knob, Na ntuziaka mode, for every 1 turn of the knob, the speed value of the small motor changes by approximately 0.1 nkeji iri. Fast rotation can quickly modify the speed value of the small motor.
Na Ọnọdụ akpaaka, press the enable button and rotate 1 Grid oge ọ bụla. The speed limit value F of the small motor changes by approximately 0.1 nkeji iri. Rapid rotation can quickly modify the speed limit value of the small motor.Press the enable button, turn the knob to the right, and the straight line correction display shows D f: keekpe. Each rotation of the knob increases by 1 unit; Tụgharịa aka ekpe, Ngosipụta ahịrị kwụ ọtọ: DF: nke imete. Each rotation of the knob increases by 1 unit, and each correction unit corresponds to a motor speed control AVI voltage of about 0.02 V.

5. Ihe eserese ngwaahịa

6. Ntuziaka nrụnye ngwaahịa
6.1 Nzọụkwụ nrụnye Ngwaahịa
1. Install the receiver in the electrical cabinet through the buckle on the back, or install it in the electrical cabinet through the screw holes at the four corners of the receiver.
2. Na-ezo aka na eserese na-anabata ihe, compare your on-site equipment, and connect the equipment to the receiver through wires.
3. Mgbe a nabatara ya, Antenna nwere a ga-ejikọ onye na-anabata ya, A ga-etinyerịrị njedebe nke antenna ma ọ bụ tinye ya n'èzí kabinet. A na-atụ aro idobe ya n'elu ebe eletriki maka mmetụta kachasị mma. It is forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet, which may cause poor signal and unusable.
4. N'ikpaazu, install the battery in the remote control, Mechie mkpuchi batrị, and then turn on the power switch of the remote control. After the remote control display shows the normal working interface, you can perform remote control operation.

6.2 Mpaghara nnabata

6.3 Onye na-anabata onyinye

7. Ntuziaka Ọrụ Ọrụ
7.1 Ntọala Press Ofpo
How to enter the background parameters of the remote controller: turn the mode switch to manual mode, Gbanwee ọsọ nke obere moto ka 25, ma ọ bụ 0, 10, 20, 40, 50, and turn the forward switch of the large motor upwards 3 times and downwards 3 ugboro;
Jiri “Obere obere moto” knob to turn the page, press Enable and turn the small motor speed control knob to modify the parameters; after modification, Tụgharịa peeji ahụ ruo na njedebe, select Save and Exit, and press the Enable button to exit the menu;

Ihe ndị a na-eme dị ka ndị a:Kachasị ugbu a: large motor current feedback value range, setting range 15-200A, odida mkwa 60;

Nchịkwa ọsọ ọsọ: automatic mode small motor automatic acceleration speed, Obere obere, setting range 200-1500, odida mkwa 1000;

Isi oke: Set the upper limit of the motor speed change allowed. Mgbe mgbanwe ugbu a karịrị uru a, it will decelerate. The smaller it is, the faster the left and right motors will decelerate. The range is 05-12, and the default is 06;

Osooso A1: The larger the value, the faster the motor speed increases, range 00-06,default 01; Nchọta A2: The larger the value, the faster the motor speed decreases, renji 00-06, odida mkwa 02;

Kwado usoro iwu ọsọ ọsọ: Whether the small motor speed regulation needs to be enabled, 00 is not enabled, 01 is enabled, odida mkwa 01;

Startup self-locking: Whether the large motor will automatically keep self-locking after the forward and reverse switch is released, 00 is not maintained, 01 is maintained, odida mkwa 01;

Maximum travel: Maximum speed of the left and right motors, renji 10-100, odida mkwa 50;

Ibelata ugbu a: Maximum cutting current, the screen displays IC value, renji 15-160, odida mkwa 30, the screen displays IC: 30. The upper limit of this parameter = maximum current x 80%;

Oké Nkwekọrịta: The default small motor automatic cutting speed at startup, renji 00-100, odida mkwa 10, the screen displays F1.0, this parameter is only accurate when the maximum travel is set to 50.

Wireless channel: Default is 10. When the remote control signal is unstable or there is signal interference on site, you can modify this parameter to switch channels to avoid interference;

Mgbasa ọsọ ọsọ: The upper limit of the automatic cutting speed of the small motor,renji 00-200, odida mkwa 60, the screen displays 6.0; Display value upper limit = speed limit offset × 0.1;

Ndị ọbịa kachasị: The maximum speed of the large motor, renji 10-100, odida mkwa 50;

Mbus device ( mmado ): large motor inverter model selection, renji 00-03, odida mkwa 03;

00- Shanghai Xielin 01 Fuji
02- Ikpo mmeputa 03 Inovance（Zhongchen, Robicon)

SBUS akụrụngwa (mmado): Obere ụgbọ ala na-emegharị anya, renji 00-05, odida mkwa 03;
00- Shanghai Xielin 01 Fuji
02- Ikpo mmeputa 03 Inovance（Zhongchen, Robicon)
04-Anguanga 05-ọ dighi

8. Nchọpụta ngwa agha

7.2 Ntọala usoro nke ihe ndị na-eme ugboro ugboro
1. Iwu isi mmalite: Super Comblice Channel
2. Isi okwu ugboro ugboro: Nkwukọrịta enyere
3. Ọnụego Baud: 19200
4. Usoro data: Enweghị nkwenye, Usoro data<8-N-1>
5. Adreesị mpaghara: Setịpụrụ ndị na-eme ihe ntụgharị aka ekpe 1, ihe ntụgharị uche ziri ezi na 2, and the large motor frequency converter to 3

7.3 Ntuziaka nchịkwa Njikwa
1. Ike na igwe, tụgharịa na ebe nchekwa, enter the remote control background, set the remote control background parameters, mainlyIt is to set the models of small and large motor frequency converters (skip this step if the machine manufacturer has already set them);
2. Nịm paramita nke ihe ntụgharị ugboro (kwuo nzọụkwụ a ma ọ bụrụ na onye nrụpụta igwe etinyelarị ya);
3. Nịm njikwa dịpụrụ adịpụ na ọnọdụ ntuziaka, and then use the remote control to move the machine to the working position;
4. Na ntuziaka mode, set the IC value for the cutting current of the large motor and the speed of the large motor;
5. Tụgharịa na ọnọdụ akpaka ma dozie oke ọsọ ọsọ maka obere moto;
6. Na Ọnọdụ akpaaka, tụgharịa nnukwu moto ka ọ ga-ebugharị nnukwu moto, and then turn the small motor switch to forward or reverse. The remote control enters automatic cutting mode and begins cutting.

9.Nlekwa anya
1. Biko jiri ya na akọrọ gburugburu ebe obibi na ọnọdụ okpomọkụ na nrụgide ịgbatị ndụ ọrụ ya.
2. Biko zere iji gburugburu ebe obibi dị ka mmiri ozuzo na mmiri mmiri na-agbatị.
3. Biko dobe ebe batrị na ebe a na-emegharị ọla ọcha.
4. Biko zere imebi ikike dịpụrụ adịpụ n'ihi ịmịcha na ịda.
5. Ọ bụrụ na ejighi ya ogologo oge, please remove the battery and store the remote control and battery in a clean and safe place.
6.N'oge nchekwa na njem, A ga-akwụ gị ụgwọ na mmiri na-eguzogide.

10. Ozi Nchedo
1. Biko gụọ ntuziaka ahụ nke ọma tupu iji ya ma gbochie ndị ọkachamara na-abụghị ndị ọrụ.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by insufficient power, nke nwere ike ime ka ihe mgbochi na-enweghị ike ịrụ ọrụ.
3. Ọ bụrụ na achọrọ mmezi, Biko kpọtụrụ onye nrụpụta. Ọ bụrụ na mmebi nke onwe, Onye na-emepụta ahụ agaghị enye akwụkwọ ikike