Androuc raara onwe ya nye Withyronic aka

Nkowa

1.Nmkpọ Okwu mmalite

A na-eji ngwa eletrik na-adịghị mma maka ntuziaka ntuziaka, Iche, tool alignment,and other operations on CNC machine tools. Ngwaahịa a na-eme teknụzụ nnyefe ikuku ikuku, na-ewepụ njikọ ọdịnala nke usoro ọdịnala, na -ebelata ọdịda akụrụngwa kpatara, eliminating the disadvantages of cable dragging and oil stains, na-eme ka ọrụ ọzọ rụọ ọrụ. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,ogo, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Ngosipụta ngwaahịa
1. Igwe teknụzụ 433mhz Ikuku, Ikuku ikuku dị 40 mize;
2. Na-arụ ọrụ na-arụ ọrụ na-arụ ọrụ, mwere 32 sets of wireless remote controllers at the same time without affecting each other;
3. Kwadebe bọtịnụ Mberede, Gbanwee Ntanetị Ntanetị, connected to the system through IO wiring;
4. Onyenjideaka 4 bọtịnụ omenala, Gbanwee akara, Mmepụta Nwepụta na Sistem Site na Usoro Nook Io;
5. Kwado bọtịnụ Mmegharị + na bọtịnụ -, Pịa ma jide bọtịnụ iji dochie aka iji kwagharịa igwe ahụ;
6. Nkwado 6-Axis Njikwa, Gbanwee akara, Mmepụta Nwepụta na Sistem Site na Usoro Nook Io;
7. Support 1X,10nke X, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Ndetu:
Bọtịnụ nkwụsị:
Pịa bọtịnụ Mkpuchi mberede, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 bọtịnụ omenala, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Pịa ma jide bọtịnụ Kwado ma maa jijiji
akara ijikwa mmegharị nke igwe axis.
⑨Power switch:
Handwheel power button.

5.Ngwaahịa ngwa ahịa ngwaahịa

6.Ntuziaka nrụnye ngwaahịa

6.1 Nzọụkwụ nrụnye Ngwaahịa

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Na-ezo aka na eserese na-anabata ihe, Jiri ya tụnyere akụrụngwa saịtị gị, ma jikọọ
akụrụngwa ahụ na-anabata ya site na eriri.
3. Mgbe a nabatara ya, Antenna nwere a ga-ejikọ onye na-anabata ya,
A ga-etinyerịrị njedebe nke antenna ma ọ bụ tinye ya n'èzí kabinet.
A na-atụ aro idobe ya n'elu ebe eletriki maka mmetụta kachasị mma. Ya
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
nke nwere ike ime ka akara ghara ịdị ụtọ.
4.N'ikpaazu, Gbanyụọ ike ịgbanwee ike ma ị rụọ ọrụ igwe site na
Njikwa Ime Obodo.

6.2 Mpaghara nnabata

6.3 Onye na-anabata onyinye

7. Mmezi na nlekọta

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
Ndụ Ọrụ;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Biko zere ịkacha, ida, iferi, wdg. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Ọ bụrụ na ejighi ya ogologo oge, Biko debe aka na ebe dị ọcha ma dị mma;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Biko gụọ ntuziaka ahụ nke ọma tupu ojiji. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Ọ bụrụ na achọrọ mmezi, Biko kpọtụrụ onye nrụpụta. If the damage is caused by self-repair,
Onye na-emepụta ahụ agaghị enye akwụkwọ ikike.