1. 12 Buttons, 6 nke na-akwado akara ngosi I/O.
2. Na-akwado ngosi ihuenyo agba 2.8 inch.
3. Na-akwado otu mgba ọkụ axis selector 9-level, na-akwado ruo 6-axis mmepụta.
4. Na-akwado otu mgba ọkụ ọnụọgụ nke ọkwa atọ.
Njikwa ikuku ikuku maka 3D Five-Axis Laser Cutting：PHB06B-LASER
Nkowa
1.Nmkpọ Okwu mmalite
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, na-akwado 12 Buttons, and supports real-time display of system coordinates and status.
2.Ngosipụta ngwaahịa
1. 12 Buttons, 6 nke na-akwado akara ngosi I/O.
2. Na-akwado ngosi ihuenyo agba 2.8 inch.
3. Na-akwado otu mgba ọkụ axis selector 9-level, na-akwado ruo 6-axis mmepụta.
4. Na-akwado otu mgba ọkụ ọnụọgụ nke ọkwa atọ.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5Nkọwapụta V-2A, built-in battery specifications 18650/12775mWh.
3.Ụkpụrụ ọrụ
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Dee: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.Nkọwapụta ngwaahịa
| Onye na-anabata ike na-enye ọkụ ọkụ | DC5V-DC24V |
| Button lifespan | 1,000,000 ugboro |
| Okpomọkụ na-arụ ọrụ |
-25℃ < Nke X < 55℃
|
| Ogologo dobe dị mma | 1 m |
| Receiver port | Ethernet |
| Number of buttons |
12
|
| Ngosipụta ihuenyo |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100dum
|
| Handheld transmit power |
15dum
|
| Nkwukọrịta ikuku | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | Dc24v / 1a |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Mmepe mmeghe nke ngwaahịa
Ndetu:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 Buttons
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 Pulses kwa mgbanwe.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Eserese Ngwa Ngwa
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
Mpaghara nnabata
Unit: millimeters
Thickness: 29.6mm
11.Nlekọta na nlekọta
1. Biko jiri ya na akọrọ gburugburu ebe obibi na ọnọdụ okpomọkụ na nrụgide ịgbatị ndụ ọrụ ya.
2. Do not use sharp objects to contact the button area to extend button life.
3. Biko debe ọdịdị nke remote control ka ọ gbatịa ndụ ọrụ ya.
4. Biko zere ịzọpịa, idobe, ma ọ bụ bumping, wdg. to prevent damage to the precision components
5. Zere mmiri na ujo n'oge nchekwa na njem.
12.Ozi Nchedo
1. Biko gụọ ntuziaka ahụ nke ọma tupu iji ya ma gbochie ndị ọkachamara na-abụghị ndị ọrụ.
2. Ọ bụrụ na ị rụkwaa ya n'onwe gị wee mebie ya, akwụkwọ ikike ahụ ga-abụ ihe efu.
