Sérstök umsókn fyrir Siemens – WixHC tækni https://www.wixhc.cn Iðnaðarleiðtogi Wed, 05 Nov 2025 06:21:59 +0000 is hourly 1 https://wordpress.org/?v=6.8.3 Notkunarhandbók fyrir rafrænt handhjól með snúru https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Vörukynning

Electronic handwheel is used for manual guidance, staðsetningu, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, stækkun, buttons, andother signals through communication.
2.Hagnýtur eiginleikar vöru
1. Notaðu 6 kjarna flugtengisnúru fyrir tengingu, með handhjóli snúru lengd á 10 meters.
2. Handhjólsskjárinn getur sýnt kerfishnit vinnuhluta, vélræn hnit,fóðurhraði, val á ás, stækkun, and other information.
3. Stuðningur við neyðarstöðvunarhnapp, Skiptu um IO merkisframleiðslu, and the hand wheel shutdown emergency stop is still valid.
4. Styður 6 Sérsniðnir hnappar, skipta um IO merki, and can output signals to the system through IO wiring or communication.
5. Styður 6 eða 8 Ástjórn, with switch IO signals that can be output to the system through IO wiring or communication.
6. Styður 3 eða 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Vörulýsing
Handwheel working power supply voltage DC24V/1A
Aflgjafaspenna móttakara DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10M.
Receiver end cable length 1M.
Receiver end network cable length 3M.
Operating temperature -25℃<X<55℃
Anti-fall height 1M.
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Product function introduction

Athugið:
Emergency stop button:
Ýttu á neyðarstöðvunarhnappinn, og tvö sett af neyðarstöðvun IO útganga á móttakara verða aftengd, and all functions of the handwheel will be invalid.
After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Sérsniðnir hnappar, hver samsvarar IO úttakspunkti á móttakara, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Haltu inni virkjanahnappinum, hristu púlsakóðann, gefa frá sér púlsmerki, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Skýringarmynd aukabúnaðar vöru

6. Leiðbeiningar um uppsetningu vöru
6.1 Uppsetningarskref fyrir vöru
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Skoðaðu raflagnateikningu móttakara okkar og berðu það saman við búnaðinn þinn á staðnum. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Uppsetningarmál móttakara

6.3 Installation dimensions of aviation plugs

6.4 Viðmiðunarrit fyrir raflagnir viðtakanda
7.Product Operation Instructions

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Veldu stækkun: Switch the magnification switch and select the magnification level you need.
7. Hreyfanlegur ás: Haltu inni virkjanahnappinum, veldu ásvalsrofann, veldu stækkunarrofann, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Ýttu á neyðarstöðvunarhnappinn, samsvarandi neyðarstöðvun IO útgangur móttakarans verður aftengdur, handhjólsaðgerðin verður óvirk, slepptu neyðarstöðvunarhnappinum, IO útgangi neyðarstöðvunar verður lokað, and the handwheel function will be restored.
8.Vörulíkan Lýsing

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : represents the number of axis selection switches, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Maintenance
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Vinsamlegast forðastu að kreista, fallandi, högg, osfrv. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ef það er ekki notað í langan tíma, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Öryggisupplýsingar

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Ef viðgerðar er þörf, vinsamlegast hafið samband við framleiðanda. Ef tjónið er af völdum sjálfviðgerðar, framleiðandinn mun ekki veita ábyrgð

 

]]> Hollur þráðlaus fjarstýring fyrir CNC lóðréttar rennibekkjarleiðbeiningar https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Vörukynning

Sérstök þráðlaus fjarstýring fyrir CNC lóðrétta rennibekk er notuð til handvirkrar leiðbeiningar, staðsetningu, verkfærastillingu, og aðrar aðgerðir á CNC lóðréttum vélum. Þessi vara samþykkir þráðlausa sendingartækni, útrýma þörfinni fyrir hefðbundnar gormatengingar, draga úr bilunum í búnaði af völdum kapla, og útrýma ókostum snúrunnar og olíubletti, gerir reksturinn þægilegri. Það á víða við um ýmsa lóðrétta rennibekk eins og CNC lóðrétta rennibekk, lóðrétta rennibekkir með einum dálki, og tvísúla lóðrétta rennibekkir. Það er einnig hægt að aðlaga að ýmsum CNC kerfum á markaðnum, eins og Siemens,
Mitsubishi, Fanuc, and Syntec.

2. Hagnýtur eiginleikar vöru

1. Ættleiða 433 MHz þráðlaus samskiptatækni, með þráðlausri notkunarfjarlægð á 40 meters.
2.Að samþykkja sjálfvirka tíðnihoppaðgerð og nota 32 sett af þráðlausum fjarstýringum samtímis, without affecting each other.
3. Stuðningur við neyðarstöðvunarhnapp, switch IO signal output.
4. Styður 2 Sérsniðnir hnappar, with switch-type IO signal output.
5. Styður -2 axis control.
6. Supports 3-level magnification control.
7. Styðjið virkja hnappaaðgerðina, sem getur gefið út kveikt/slökkt á IO merki og stjórnað vali áss, margföldunarstuðull, and encoder.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Styður púls kóðara, með forskrift um 100 pulses per revolution.
3. Vörulýsing
Rekstrarspenna og straumur þráðlausrar fjarstýringar
3V/14MA
Rafhlöðuupplýsingar 2 AA alkaline rafhlöður, size 5
Lágspennuviðvörunarsvið þráðlausrar fjarstýringar < 2.3V
Aflgjafaspenna móttakara DC5V-24V/A
Hleðslusvið fyrir neyðarstöðvun móttakara AC125V-1A/DC30V-2A
Móttakari virkja álagssvið úttaks
AC125V-1A/DC30V-2A
Sérsniðið hleðslusvið fyrir úttakshnapp fyrir móttakara DC24V/50mA
Úttaksálagssvið fyrir val ás móttakara DC24V/50mA
Hleðslusvið fyrir úttaksstækkun móttakara DC24V/50mA
Sendingarafl handstöðvar
15dBm
Móttökutæki fær næmni -100dBm
Þráðlaus samskiptatíðni 433MHz tíðnisvið
Þráðlaus fjarskiptafjarlægð Hindrunarlaus fjarlægð af 40 metrar
Rekstrarhitastig -25℃ < X < 55℃
Fallhæð gegn fallhæð 1 (metra)
Sérsniðið hnappamagn 2
4. Inngangur vöruaðgerða



Skýringar:

① Púls kóðari:
Haltu inni virkjanahnappinum, hristu púlsakóðann, gefa frá sér púlsmerki,and control the movement ofthe machine axis.
② Virkja hnappinn:
Ýttu á annan hvorn virkjunarhnappinn á hvorri hlið, og tvö sett af virkja IO úttak á móttakara munu leiða. Slepptu virkjahnappinum til að aftengja virkja IO úttakið; Og áður en þú skiptir um ásvalsstækkun og hristir handhjólið,Halda þarf virkjahnappinum niðri til að virka; This function can be cancelled through configuration software.

③ Gaumljós:
Vinstra hliðarljós: kveikt á ljósinu,handhjólið notar ásinn til að velja OFF til að kveikja á, og þetta ljós logar eftir að kveikt er á henni;
Miðljós: merkjaljós sem kviknar þegar einhver aðgerð handhjólsins er notuð, og kviknar ekki þegar það er engin aðgerð;
Hægra hliðarljós: Lágt spennu viðvörunarljós, lágt rafhlöðustig,þetta ljós blikkar eða helst áfram, battery needs to be replaced.

④ Neyðarstöðvunarhnappur:
Ýttu á neyðarstöðvunarhnappinn, og tvö sett af neyðarstöðvun IO útganga á móttakara verða aftengd, and all functions of the handwheel will be invalid.

⑤ Stækkunarrofi:
Haltu inni virkjanahnappinum til að skipta um stækkunarrofann, which can switch the magnification controlled by the handwheel.

⑥ Ásvalrofi (aflrofi):
Haltu inni virkjanahnappinum til að skipta um ásvalsrofa, sem getur skipt um hreyfiás sem stjórnað er af handhjólinu. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Sérsniðinn hnappur:
Tveir sérsniðnir hnappar, each corresponding to an IO output point on the receiver.

5. Skýringarmynd aukabúnaðar vöru

6. Leiðbeiningar um uppsetningu vöru
6.1 Uppsetningarskref fyrir vöru

1. Settu móttakarann ​​í rafmagnsskápinn í gegnum sylgjuna á bakhliðinni, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Skoðaðu raflagnateikningu móttakara okkar og berðu það saman við búnaðinn þinn á staðnum. Connect the equipment to the receiver via cables.
3.Eftir að móttakarinn er rétt festur, loftnetið sem er búið móttakara verður að vera tengt, og ytri enda loftnetsins ætti að setja upp eða setja fyrir utan rafmagnsskápinn. Mælt er með því að setja það efst á rafmagnsskápnum fyrir bestu merkjaáhrif. Óheimilt er að skilja loftnetið eftir ótengt eða setja það inni í rafmagnsskápnum, as this may result in the signal being unusable.
4. Loksins, kveiktu á aflrofanum á handhjólinu, and you can operate the machine remotely using the handwheel.

6.2 Uppsetningarmál móttakara

6.3 Viðmiðunarrit fyrir raflagnir viðtakanda

7. Notkunarleiðbeiningar vöru
1. Kveiktu á vélinni og móttakaranum. Gaumljós móttakarans blikkar. Settu rafhlöðuna í þráðlausa rafræna handhjólið, festu rafhlöðulokið, og
kveiktu á aflrofanum á þráðlausa rafræna handhjólinu. The handwheel’s battery level indicator light is on.
2. Veldu hnitaás: Haltu inni virkjanahnappinum, skipta um ásvalsrofa, and select the axis you want to operate.
3. Veldu stækkun: Haltu inni virkjanahnappinum, skipta um stækkunarrofann,and select the desired magnification level.
4. Hreyfanlegur ás: Haltu inni virkjanahnappinum, veldu ásvalsrofann, veldu stækkunarrofann, og snúðu síðan púlskóðaranum. Snúðu réttsælis til að færa
positive axis and counterclockwise to move the negative axis.
5. Haltu inni hvaða sérsniðnu hnappi sem er, og kveikt verður á samsvarandi IO-útgangi hnappsins á móttakara. Slepptu takkanum, and the output will be turned off.
6. Ýttu á neyðarstöðvunarhnappinn, samsvarandi neyðarstöðvun IO útgangur móttakarans verður aftengdur, handhjólsaðgerðin verður óvirk,slepptu neyðarstöðvunarhnappinum, IO útgangi neyðarstöðvunar verður lokað, and the handwheel function will be restored.
7. Ef handhjólið er ekki notað í nokkurn tíma, það fer sjálfkrafa í svefnstillingu til að draga úr orkunotkun. Þegar það er notað aftur, the handwheel can be activated by pressing the enable button.
8. Ef handhjólið er ekki notað í langan tíma, Mælt er með því að skipta handhjólsskaftinu í OFF stöðu, slökktu á handhjólaflinu, and extend the battery life.

8. Vörulíkan Lýsing

① :ZTWGP táknar útlitsstílinn
②：Púlsúttaksbreytur:
01: Gefur til kynna að úttaksmerki púls sé A, B; Púlsspenna 5V; pulse quantity 100PPR.
02：Gefur til kynna að úttaksmerki púls séu A og B; Púlsspenna 12V; pulse quantity 100PPR.
03：Gefur til kynna að úttaksmerki púls séu A, B, A -, B -; Púlsspenna 5V; pulse quantity 100PPR.
04：Gefur til kynna lágstigs NPN opið hringrásarúttak, með púlsúttaksmerkjum A og B;The number of pulses is 100PPR.
05：Gefur til kynna hágæða PNP upprunaúttak, með púlsúttaksmerkjum A og B; The number of pulses is 100PPR.
③：Sýnir fjölda ásvalsrofa, 2 táknar 2 axes.
④：Táknar tegund ásvalsrofamerkis, A táknar úttaksmerki frá punkti til punkts, and B represents encoded output signal.
⑤：Táknar tegund margföldunarrofamerkis, A táknar úttaksmerki frá punkti til punkts, and B represents encoded output signal.
⑥：Táknar fjölda sérsniðinna hnappa, 2 táknar 2 custom buttons.
⑦：Táknar aflgjafa fyrir handhjól kerfisins, og 05 represents 5V power supply.
⑧：L táknar vinstri dálkinn (vinstri hnífahaldari), og R táknar hægri dálkinn (hægri hnífahaldari).

9.Lausn á bilunum í vöru

10. Viðhald vöru

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Vinsamlegast forðastu að kreista, fallandi, högg, osfrv. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ef það er ekki notað í langan tíma, vinsamlegast geymdu handhjólið á hreinum og öruggum stað. Við geymslu og flutning, attention should be paid to moisture and shock resistance.

11. Öryggisupplýsingar

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Ef viðgerðar er þörf, vinsamlegast hafið samband við framleiðanda. Ef tjónið er af völdum sjálfviðgerðar, framleiðandinn mun ekki veita ábyrgð

]]> Fanuc hollur þráðlaus rafræn handhjól https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Maí 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Vörukynning

Wireless electronic handwheel is used for manual guidance, staðsetningu, tool alignment,and other operations on CNC machine tools. Þessi vara samþykkir þráðlausa sendingartækni, eliminating the traditional spring wire connection, draga úr bilunum í búnaði af völdum kapla, eliminating the disadvantages of cable dragging and oil stains, og gera notkun þægilegri. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,stækkun, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Product features
1. Samþykkja 433MHz þráðlausa samskiptatækni, Þráðlaus aðgerðarfjarlægð er 40 metrar;
2. Adopt automatic frequency hopping function, use 32 sets of wireless remote controllers at the same time without affecting each other;
3. Stuðningur við neyðarstöðvunarhnapp, Skiptu um IO merkisframleiðslu, connected to the system through IO wiring;
4. Stuðningur 4 Sérsniðnir hnappar, Skiptu um IO merki, framleiðsla merki við kerfið í gegnum IO-Link samskiptareglur;
5. Styðjið skjót hreyfingarhnapp + og hnappur -, Haltu inni hnappinum til að skipta um handhjól til að færa vélina;
6. Styðjið 6-ás stjórn, Skiptu um IO merki, framleiðsla merki við kerfið í gegnum IO-Link samskiptareglur;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Skýringar:
①Emergency stop button:
Ýttu á neyðarstöðvunarhnappinn, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Sérsniðnir hnappar, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Vörubúnaðar skýringarmynd

6.Leiðbeiningar um uppsetningu vöru

6.1 Product Installation Steps

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Refer to our receiver wiring diagram, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3. After the receiver is fixed, loftnetið sem er búið móttakara verður að vera tengt,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Mælt er með því að setja það efst á rafmagnsskápnum fyrir bestu merkjaáhrif. It
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Loksins, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 Uppsetningarmál móttakara

6.3 Viðmiðunarrit fyrir raflagnir viðtakanda

7. Maintenance and care

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
the service life;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Vinsamlegast forðastu að kreista, fallandi, högg, osfrv. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Ef það er ekki notað í langan tíma, vinsamlegast geymdu handhjólið á hreinum og öruggum stað;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Please read the instructions carefully before use. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Ef viðgerðar er þörf, vinsamlegast hafið samband við framleiðanda. If the damage is caused by self-repair,
the manufacturer will not provide warranty.

]]> Siemens hollur þráðlaus rafræn handhjól xwgp-et https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Maí 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Introduction of remote control

a.Product Composition
Siemens real-time coordinate display wireless electronic handwheel consists of two parts: electronic handwheel + receiver;

b.Characteristics

*Styðjið Siemens Plc: S7-200/-300/-1200；Styðjið rauntíma birtingu Siemens kerfishnitagilda；
*Þráðlausa flutningsfjarlægðin er opin 40 metrar, automatic frequency hopping technology, can use 32 sets of equipment at the same time;
*The electronic handwheel is powered by 2 AA batteries and can be used for more than 30 dagar;
*The receiver is equipped with an external antenna to enhance the signal and is easy to install;
*Electronic handwheel support: einn 100PPR kóðari 、einn 6 gíra ás valkostur 、 einn 3 gíra stækkunarrofa;
*Electronic handwheel supports 6 Sérsniðnir hnappar, corresponding to Siemens PLC address, sem hægt er að forrita að vild;

*6 Sérsniðnir hnappar geta stjórnað 6 skipta um framleiðsla;
*The display screen displays the PLC corresponding register coordinate value in real time, and supports 6-axis display of real-time coordinates.

2.Application field

Programmable CNC remote control is widely used in various CNC fields such as laser engraving system, CNC Milling Machine, CNC machining center, gantry machine tool, o.fl.

3. Introduction to the working principle

1）Electronic handwheel is connected to PLC via Ethernet receiver

a.The handwheel transmits the key data wirelessly to the receiver, and the receiver writes the keys through the network cable PLC system DB area; the receiver reads the data to be displayed from the designated DB area, and then returns the data to the handwheel display screen. The user can customize the base address of reading and writing DB area on the handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. The receiver supports Siemens S7 protocol. Applies to PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

In the server mode, the user configures the PLC read and write address through the WGP-ETS configuration software;Use the PLC connection configuration tool to configure the receiver into client mode. After configuration, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Specific application

Specific application of handwheel receiver and Siemens PLC S7-200:

a. The button on the handwheel corresponds to the value of the BOOL area set by the user in the PLC. If the button of the handwheel is pressed, the corresponding BOOL area is true, and when it is released, it is false, and the base address of the BOOL area can be set through the handwheel;

b. The handwheel can read the value of the DB area in the PLC. One axis has 4 bytes of display data, og 6 axes have a total of 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Appearance introduction

5.Receiver terminal definition and coding table

6.Appearance size

 

 

]]>