1.Pambuka Produk

Tangan tangan elektronik nirkabel digunakake kanggo tuntunan manual, posisi, setting alat lan
Operasi Piranti Mesin CNC. Produk iki nggunakake teknologi transmeless nirkabel,
Ngilangi Sambungan Kabel Musim semi Tradisional, nyuda gagal peralatan sing disebabake kabel,
Ngilangake kekurangan kabel nyeret kabel, Noda minyak, lsp., lan luwih trep kanggo
operate. Iki digunakake digunakake ing alat mesin CNC kayata Pusat Mesin Gantry, Gantry
Lathes vertikal, Mesin Pangolahan Gear Cnc, lan bisa dicocogake karo macem-macem CNC
Sistem ing pasar, Sing Siemens, Mitsubishi, Fanuc, Sistem Syntec lan CNC liyane
brands.

2.Fitur Produk

1. Teknologi Komunikasi Wireless Wireless 433MHZ, Jarak Operasi Wireless yaiku 80 meter;
2. Fungsi Frekuensi Hopping Otomatis, Gunakake 32 Set pangontrol remot nirkabel ing
wektu sing padha tanpa mengaruhi saben liyane;
3. Dhukungan tombol mandeg darurat, lan sawise pasamunan dipateni, mandeg darurat
Tombol isih bener;
4. Dhukungan 6 Kancing Custom, Output Signal Io;
5. Ndhukung Kontrol 6 Axis, 7-12 Kontrol Axis bisa disesuaikan;
6. Ndhukung 1x,10X, 100X kontrol lan bisa dadi maksimal tambahan 1000X;
7. Supports the enable button function, output switch l0 sianals. Pilihan Axis,maanification
and encoder.;
8. Support axis selection and magnification selection encoder output;
9. Ndhukung Tipe standar-C, 5Spesifikasi V-2A Ngisi daya, built-in battery specification
14500/1100mAh.

3.Spesifikasi Produk

4.Introduksi fungsi produk

Cathetan：
①Emergency stop button：
Nalika tombol mandeg darurat dipencet, the two emergency stop IO outputs on
the receiver are disconnected, and all handwheel functions are invalid. When the emergency
stop is released, the emergency stop IO output on the receiver is closed, and all handwheel
functions are restored; lan sawise pasamunan dipateni, the emergency stop IO output
of the receiver is still valid when the emergency stop button is pressed.

②Enable button:
Press any one of the enable buttons on both sides, and the two groups of enable IO
outputs on the receiver will be turned on. Release the enable button and the enable IO
output will be turned off. Kajaba iku, Sampeyan kudu mencet terus tombol Aktifake sadurunge
Ngalih Rasio Pilihan Axis lan goyangake tangan. Fungsi iki bisa dadi
canceled through the configuration software.
Switch pilihan (switch daya):
Pencet terus tombol Aktifake banjur ngalih switch Axis pilihan kanggo ngalih
mindhah sumbu dikontrol dening tangan. Ngalih ngalih iki menyang sumbu lan
turn on the handwheel power.

④pulse Encoder:
Pencet terus tombol Aktifake lan goyangake encoder pulsa kanggo ngirim pulsa
signal to control the movement of the machine axis.

Indikator ⑤battery:
Tampilan daya wheel tangan, kabeh sing cerah tegese kebak kekuwatan, kabeh tegese ora
diuripake utawa ora duwe kekuwatan, Lampu kothak kiwa pisanan, nuduhake yen kekuwatan banget sithik,
please charge in time.
Lampu Lampu:
Yen cahya sinyal ana ing, Tegese handwheel dioperasekake lan sinyal yaiku
normal; Yen cahya sinyal mati, Tegese ora ana operasi, utawa dioperasikake nanging
the wireless signal is not connected.

5.Diagram aksesoris produk

6.Pandhuan instalasi Produk

6.1 Langkah-langkah instalasi Produk
1. Instal panrima ing kabinet listrik nggunakake klip ing mburi, utawa nginstal ing
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Rujuk diagram kabel panrima kita, Bandhingake karo peralatan ing situs sampeyan, lan nyambung
the equipment to the receiver via cables.
3.Sawise panrima tetep, Antena sing dilengkapi karo panrima kudu nyambung,
lan mburi antena utama kudu diinstal utawa dilebokake ing njaba kabinet listrik. Iku
dianjurake kanggo nyelehake ing ndhuwur kabinet listrik kanggo efek sinyal paling apik. Iku
Dilarang ninggalake antena sing ora dikonfirmasi utawa nyelehake antena ing kabinet listrik,
which may cause the signal to be unusable.
4. Pungkasane, Nguripake saklar daya tangan lan sampeyan bisa ngoperasikake mesin kasebut
handwheel remote control.

6.2 Ukuran Instalasi Panampa

6.3 Diagram referensi wiring wiring panrima

7.Pandhuan operasi produk
1. Mesin kasebut digunakake ing, Panrima wis digunakake ing, Indikasi panrima
lampu kelip-kelip, Handwheel Elektronik Wireless duwe baterei wis diinstal, Tutup baterei
diikat, Switchel daya tangan tangan nirkabel nirkabel diuripake, lan ing
Lampu Daya Handwheel urip;
2. Pilih sumbu koordinat: Pencet terus tombol Aktifake, ngalih pilihan axis
ngalih, banjur pilih sumbu sing pengin digunakake;
3. Pilih Magnifikasi: Pencet terus tombol Aktifake, ngalih switch,
banjur pilih level pembagi sing dibutuhake;
4. Ngalih sumbu: Pencet terus tombol Aktifake, Pilih switch pilihan AXIS pilihan, Pilih
switch magnasi, banjur Rotateleter Encoder Pulsa kanggo muter sumbu obah sing positif
jarum jam lan sumbu obah sing negatif;
5. Pencet terus tombol apa wae, lan tombol sing cocog karo output saka
Panampa bakal diuripake. Rilis tombol kanggo mateni output;
6. Pencet tombol mandeg darurat, output darurat darurat sing cocog karo
panrima ora pedhot, Fungsi handwheel dipatèni, ngeculake mandeg darurat
Tombol, Output io darurat darurat ditutup, lan fungsi handwheel dibalekake;
7. Yen handwheel ora dilakokno sajrone wektu, Bakal ngetik turu kanthi otomatis
Mode kanggo nyuda konsumsi daya. Yen digunakake maneh, Tangan tangan bisa uga
diuripake kanthi mencet tombol Aktifake;
8. Yen tangan tangan ora digunakake kanggo wektu sing suwe,Apike kanggo ngalih handwheel
batang menyang posisi mati, mateni kekuwatan tangan, and extend the battery life.

8.Katrangan Model Produk

① ：DWGP makili gaya penampilan

② ：Parameter output pulsa:
01: Nuduhake yen sinyal output pulsa minangka lan b, lan voltase pulsa yaiku 5v; Pulsa
jumlah 100pr;
02: Nuduhake yen sinyal output pulsa minangka lan b, lan voltase pulsa yaiku 12v; Pulsa
kuantitas 25pr;
03: Nuduhake yen sinyal output pulsa yaiku b、A-、B-； Pulsa voltase 5V; Pulse quantity 1
00Ppr;
04: Nuduhake output sirkuit sing kurang murah, Kanthi sinyal output pulsa saka A lan B; The
Jumlah pulsa yaiku 100ppr;05: Nuduhake output sumber PNP sing dhuwur, sinyal output pulsa
yaiku a lan b; Kuantitas pulsa yaiku 100ppr;
③ : nggantosi nomer pemilihan sumbu, 6 nggantosi 6 sumbu, 7 nggantosi 7 axis.
④ : nggantosi jinis sinyal sumbu sumbu, A nggambarake sinyal output output titik-titik,
B nggambarake sinyal output sing bisa dikodhe;

⑤ : nggantosi jinis sinyal ngalih magnifikasi,
A nggambarake sinyal output output titik-titik, B nggambarake sinyal output sing bisa dikodhe;
⑥ : nggantosi nomer tombol adat, 6 nggantosi 6 Kancing Custom;
⑦ : nggantosi pasokan listrik kanggo handwheel sistem, 05 makili sumber daya 5v,
lan 24 represents 24V power supply.

9.Ngatasi masalah produk

10. Pangopènan lan perawatan

1. Mangga nggunakake ing lingkungan garing ing suhu kamar lan tekanan kanggo ngluwihi layanan;
2. Aja nggunakake ing lingkungan sing ora normal kayata udan lan banyu kanggo ngluwihi layanan layanan kasebut;
3. Mangga tansah munculna tangan tangan ngresiki kanggo njaga uripe;
4. Aja nganti nyepelekake, Mudhun, nabrak, lsp. Kanggo nyegah karusakan ing komponen presisi ing njero
Kesalahan tangan utawa akurasi;
5. Yen ora digunakake kanggo wektu sing suwe, Mangga simpen tangan ing papan sing resik lan aman;
6.Sajrone panyimpenan lan transportasi, attention should be paid to moisture and shock resistance.

11.Informasi safety

1. Mangga maca pandhuan kanthi ati-ati sadurunge digunakake lan nglarang profesional saka operasi;
2. Yen level baterei sithik, Mangga ngisi wektu kanggo ngindhari kesalahan sing disebabake ora cukup
baterei lan kasekengan kanggo ngoperasikake handwheel;

3. Yen ndandani dibutuhake, Hubungi pabrikan. Yen karusakan disebabake perbaikan dhewe, the manufacturer will not provide warranty.

1.Pambuka Produk

CNC RemoteMable Control Control Phb06B cocog kanggo nirkabel
Operasi kontrol remot saka macem-macem sistem CNC. Ndhukung pangguna menyang
Ngaturake pemrograman lan ngembangake fungsi tombol kanggo nyadari remot
Kontrol macem-macem fungsi ing sistem CNC; Ndhukung pangguna menyang
Ngatur pamrograman lan ngembangake konten nampilake dinamis
Tampilan status sistem; Kontrol remot teka karo sing bisa diisi ulang
battery and supports Type-C interface charging.

2.Fitur Produk

1. Nggunakake teknologi komunikasi nirkabel 433MHZ, Operasi nirkabel
Jarak iku 80 meter;
2. Nggunakake fungsi hopping frekuensi otomatis, 32 nyetel remot nirkabel
pengontrol bisa digunakake ing wektu sing padha tanpa mengaruhi;
3. Dhukungan 12 Programming Tombol Custom;
4. Ndhukung layar 2.8 inci, nampilake program adat konten;
5. Dhukungan 1 6-Switch Sumbang Sosial Axis, sing bisa diprogram khusus;
6. Dhukungan 1 7-switch kacepetan kacepetan, sing bisa diprogram khusus;
7. Dhukungan 1 handwheel elektronik, 100 pulsa / giliran;
8. Ndhukung Tipe standar-C; 5Spesifikasi V-2A Ngisi daya; Baterai
specification 18650/12580mWh battery.

3.Prinsip kerja

4. Spesifikasi Produk

5.Introduksi fungsi produk

Cathetan：
Switch ①power：
Rodha tangan ngontrol mbukak lan nutup

Tombol ing loro-lorone：
Tombol Ngaktifake kudu dipencet kanggo ngangkut rodha tangan;

Wilayah tombol ③custom
12 Tombol disusun ing 3X4, Programming sing ditetepake pangguna;

Pilih pilihan ④axis, switch magnififikasi
1 6-Switch Sumbu Axis Milih, sing bisa disesuaikan lan diprogram;
1 7-saklar rasio posisi, sing bisa disesuaikan lan diprogram

⑤ switch mandeg darurat:
Ngalih mandeg darurat;

Wilayah ⑥display:
Bisa nampilake kekuwatan saiki, sinyal, lan konten tampilan sing disesuaikan;

Rodha tangan ⑦electronic：
1 handwheel elektronik, 100 pulses/turn.

Port:

Baterei sing dibangun, Diwenehi nggunakake pangisi daya Tipe-C, Ngisi daya voltase 5V,
1A-2A-2A; Ngisi Wektu 7 jam;

6.Diagram aksesoris produk

7.Pandhuan instalasi Produk

1. Lebokake panampa USB menyang komputer, komputer bakal kanthi otomatis
ngerteni lan nginstal driver piranti USB tanpa instalasi manual;
2. Lebokake kontrol remot menyang pangisi daya. Sawise baterei wis kebak, giliran
Ing ngalih tenaga, Nguripake kontrol remot, lan tampilan ditampilake normal, kang
tegese kekuwatan wis sukses;
3. Sawise kuwasa ing, Sampeyan bisa nindakake operasi tombol apa wae. Kontrol remot bisa
Ndhukung operasi tombol dual sekaligus. Yen sampeyan menet tombol apa wae, ireng
alun-alun bakal katon ing jejere sinyal ing remot kontrol, nuduhake yen tombol kasebut
is valid.

8.Pandhuan operasi produk
Sadurunge pangembangan produk lan panggunaan, Sampeyan bisa nggunakake piranti lunak demo sing diwenehake kanggo nyoba
Tombol lan tampilan remot kontrol, utawa gunakake demo minangka rutin referensi kanggo
Pangembangan Programming Masa;
Sadurunge nggunakake Software demo, mangga tarik panampa USB menyang komputer, nggawe
yakin pengontrol remot duwe kekuwatan sing cukup, Nguripake saklar daya, banjur gunakake;
Yen ana tombol ing remot kontrol dipencet, demo piranti lunak test bakal nampilake
Nilai kunci sing cocog. Sawise ngeculake, Tampilan nilai kunci ilang, nuduhake iku
the button upload is normal.

9.Ngatasi masalah produk

10. Pangopènan lan perawatan

1. Mangga nggunakake ing lingkungan garing kanthi suhu normal lan tekanan kanggo ngluwihi
layanan layanan;
2. Aja nggunakake obyek sing cetha kanggo ndemek wilayah utama kanggo nglanjutake layanan ing kunci;
3. Mangga njaga area utama sing ngresiki kanggo nyuda pakaian kunci;
4. Aja nyepelekake lan tiba nyebabake karusakan ing remot kontrol;
5. Yen ora digunakake kanggo wektu sing suwe, Mangga copot baterei banjur simpen kontrol remot lan
baterei ing papan sing resik lan aman;
6. Pay attention to moisture-proof during storage and transportation.

11.Informasi safety

1. Mangga maca pandhuan kanthi ati-ati sadurunge digunakake. Ora profesional dilarang
from operating.
2. Mangga nggunakake pangisi daya asli utawa pangisi daya sing diprodhuksi dening pabrikan biasa
the same specifications.
3. Mangga ngisi wektu kanggo ngindhari operasi sing ora bener amarga ora cukup tenaga nyebabake
the remote control to be unresponsive.
4. Yen ndandani dibutuhake, Hubungi pabrikan. Yen karusakan disebabake
Diposaken diri, the manufacturer will not provide warranty.

1.Pambuka Produk

The programmable CNC remote control PHB10 is suitable for wireless
Operasi kontrol remot saka macem-macem sistem CNC. It supports user-defined
programming to develop button functions, and realize remote control of various
functions on the CNC system; it supports user-defined programming to develop
LED lights to light up and turn off, and realize dynamic display of system status;
the remote control comes with a rechargeable battery and supports Type-C
interface charging.

2.Fitur Produk

1. Nggunakake teknologi komunikasi nirkabel 433MHZ, Operasi nirkabel
Jarak iku 80 meter;
2.Nggunakake fungsi hopping frekuensi otomatis, 32 nyetel remot nirkabel
pengontrol bisa digunakake ing wektu sing padha tanpa mengaruhi;
3.Dhukungan 32 Programming Tombol Custom;
4.Dhukungan 9 custom LED light display programming;
5.Support IP67 waterproof level;
6.Support standard Type-C interface charging; 5Spesifikasi V-2A Ngisi daya;
1100 mAh large capacity battery, with automatic sleep standby function; realize
ultra-long low power standby;
7.Support real-time display of power.

3.Prinsip kerja

4. Spesifikasi Produk

5.Introduksi fungsi produk

Cathetan：
①Battery level display：
Lights up after power on, turns off after power off;
If the battery indicator light is only one bar and keeps flashing, it means the
battery is too low. Please replace the battery;

If the battery indicator lights are all on and the other LED lights flash back and
forth, it means the battery is very low. Please replace the battery;
If the battery indicator does not light up or go out, and the device cannot be
started by pressing and holding the power button, Mangga ngganti baterei;

②Button area：32 buttons arranged in 4X8, Programming sing ditetepake pangguna;

③Status LED：
COMMU: Button indicator light, lights up when the button is pressed and goes
out when the button is released; other lights are custom displays;

④Power switch：
Long press for 3 seconds to turn on, long press for 3 seconds to turn off;
⑤Charging port：
Use Type-C charger to charge, Ngisi daya voltase 5V, 1A-2A-2A; charging
time 3-5 jam;

When charging, the power indicator flashes, indicating that it is charging. When
fully charged, the power indicator will show full bar without flashing.

6.Diagram aksesoris produk

7.Pandhuan instalasi Produk

1 . I nsert the USB receiver into the computer, komputer bakal kanthi otomatis
recognize and install the USB device driver without manual
2. Lebokake kontrol remot menyang pangisi daya. Sawise baterei wis kebak, press
and hold the power button for 3 seconds. The remote control will turn on and the power
indicator will light up, indicating that the power-on is successful.
3. Sawise kuwasa ing, Sampeyan bisa nindakake operasi tombol apa wae. The remote control
can support dual button operation at the same time. Yen sampeyan menet tombol apa wae, The
COMMU light on the remote control will light up, indicating that this button is valid.

8.Pandhuan operasi produk
Sadurunge pangembangan produk lan panggunaan, you can use the demo software we provide to
test the buttons on the remote control and the LED light on the remote control. You can
also use the demo as a reference routine for future programming development.
Sadurunge nggunakake Software demo, mangga tarik panampa USB menyang komputer,
make sure the remote controller has sufficient power, press and hold the power button to t
urn it on, banjur gunakake;
Yen ana tombol ing remot kontrol dipencet, the test software demo will display
the corresponding key value. Sawise ngeculake, Tampilan nilai kunci ilang,
indicating that the key upload is normal;
You can also select the LED light number on the test software demo, click download,
and the corresponding light number on the remote control will light up, indicating that the
LED light is downloading normally.

9.Ngatasi masalah produk

10. Pangopènan lan perawatan

1. Mangga nggunakake ing lingkungan garing kanthi suhu normal lan tekanan kanggo ngluwihi
layanan layanan;
2. Aja nggunakake obyek sing cetha kanggo ndemek wilayah utama kanggo nglanjutake layanan ing kunci;
3. Mangga njaga area utama sing ngresiki kanggo nyuda pakaian kunci;
4. Aja nyepelekake lan tiba nyebabake karusakan ing remot kontrol;
5. Yen ora digunakake kanggo wektu sing suwe, please remove the battery and store the remote control
and battery in a clean and safe place;
6. Pay attention to moisture-proof during storage and transportation.

11.Informasi safety

1. Mangga maca pandhuan kanthi ati-ati sadurunge digunakake. Non-professionals are prohibited from
operating.
2. Please use the original charger or a charger produced by a regular manufacturer with the
same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing the
remote control to be unresponsive.
4. Yen ndandani dibutuhake, Hubungi pabrikan. If the damage is caused by self-repair,
the manufacturer will not provide warranty.