Aplikasi Khusus Kanggo Siemens – Teknologi Wixhc https://www.wixhc.cn Pemimpin Industri Wed, 05 Nov 2025 06:21:59 +0000 jv-ID hourly 1 https://wordpress.org/?v=6.8.3 Manual instruksi tanda tangan electronic kabel https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Pambuka Produk

Electronic handwheel is used for manual guidance, posisi, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, Magnifikasi, buttons, andother signals through communication.
2.Product functional features
1. Gunakake kabel plug penerbangan 6-inti kanggo sambungan, Kanthi kabel lengen tangan 10 meters.
2. Layar tangan tangan bisa nampilake koordinat kerja sistem, koordinat mekanik,Tingkat feed, Pilihan Axis, Magnifikasi, and other information.
3. Dhukungan tombol mandeg darurat, Output Signal Io, and the hand wheel shutdown emergency stop is still valid.
4. Ndhukung 6 Kancing Custom, Signal IO, and can output signals to the system through IO wiring or communication.
5. Ndhukung 6 utawa 8 Kontrol Axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Ndhukung 3 utawa 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulsa / giliran, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Spesifikasi Produk
Handwheel working power supply voltage DC24V/1A
Receiver power supply voltage DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10m
Receiver end cable length 1m
Receiver end network cable length 3m
Operating temperature -25℃<X<55℃
Anti-fall height 1m
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Introduksi fungsi produk

Cathetan:
Emergency stop button:
Pencet tombol mandeg darurat, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Kancing Custom, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Pencet terus tombol Aktifake, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Product accessory diagram

6. Pandhuan instalasi Produk
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Ukuran Instalasi Panampa

6.3 Installation dimensions of aviation plugs

6.4 Diagram referensi wiring wiring panrima
7.Pandhuan operasi produk

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Pilih Magnifikasi: Switch the magnification switch and select the magnification level you need.
7. Ngalih sumbu: Pencet terus tombol Aktifake, Pilih switch pilihan AXIS pilihan, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Pencet tombol mandeg darurat, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.Katrangan Model Produk

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : nggantosi nomer pemilihan sumbu, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Maintenance
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Aja nganti nyepelekake, Mudhun, nabrak, lsp. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Yen ora digunakake kanggo wektu sing suwe, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Informasi safety

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Yen ndandani dibutuhake, Hubungi pabrikan. Yen karusakan disebabake perbaikan dhewe, Pabrikan ora bakal menehi garansi

 

]]> Pembaruan nirkabel darmabakti kanggo Pandhuan Operasi CNC Vertikal CNC https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Pambuka Produk

The dedicated wireless remote contro for CNC vertical lathes is used for manual guidance, posisi, tool setting, and other operations on CNC vertical machine tools. Produk iki nggunakake teknologi transmeless nirkabel, eliminating the need for traditional spring wirae connections, nyuda gagal peralatan sing disebabake kabel, and eliminating the disadvantages of cable dragging and oil stains, making operation more convenient. It is widely applicable to various vertical lathes such as CNC vertical lathes, single-column vertical lathes, and double-column vertical lathes.It can also be adapted to a variety of CNC systems on the market, Sing Siemens,
Mitsubishi, Fanuc, and Syntec.

2. Product functional features

1. Adopting 433 MHz wireless communication technology, with a wireless operating distance of 40 meters.
2.Adopting automatic frequency hopping function and using 32 sets of wireless remote controllers simultaneously, without affecting each other.
3. Dhukungan tombol mandeg darurat, switch IO signal output.
4. Ndhukung 2 Tombol Customizable, with switch-type IO signal output.
5. Ndhukung -2 axis control.
6. Supports 3-level magnification control.
7. Support the enable button function, which can output on/off IO signals and control axis selection, multiplying factor, and encoder.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Supports pulse encoder, with a specification of 100 pulses per revolution.
3. Spesifikasi Produk
Operating voltage and current of wireless remote
3V/14MA
Battery specifications 2 AA alkaline batteries, size 5
Low voltage alarm range of wireless remote < 2.3V
Receiver power supply voltage DC5V-24V/A
Receiver emergency stop output load range AC125V-1A/DC30V-2A
Receiver enable output load range
AC125V-1A/DC30V-2A
Receiver custom button output load range DC24V/50mA
Receiver axis selection output load range DC24V/50mA
Receiver magnification output load range DC24V/50mA
Transmission power of handheld terminal
15dBm
Receiver receiving sensitivity -100dBm
Wireless communication frequency 433MHz frequency band
Wireless communication distance Barrier free distance of 40 meter
Operation temperature -25℃ < X < 55℃
Anti fall height 1 (meter)
Custom button quantity 2
4. Product Function Introduction



Cathetan:

① Pulse encoder:
Pencet terus tombol Aktifake, shake the pulse encoder, emit a pulse signal,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: Low voltage alarm light, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
Pencet tombol mandeg darurat, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (switch daya):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Product accessory diagram

6. Pandhuan instalasi Produk
6.1 Product installation steps

1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the equipment to the receiver via cables.
3.After the receiver is properly fixed, Antena sing dilengkapi karo panrima kudu nyambung, and the outer end of the antenna should be installed or placed outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for the best signal effect. It is prohibited to leave the antenna unconnected or place it inside the electrical cabinet, as this may result in the signal being unusable.
4. Pungkasane, turn on the power switch of the handwheel, and you can operate the machine remotely using the handwheel.

6.2 Ukuran Instalasi Panampa

6.3 Diagram referensi wiring wiring panrima

7. Product operation instructions
1. Power on the machine and the receiver. The receiver’s working indicator light flashes. Install the battery in the wireless electronic handwheel, secure the battery cover, lan
turn on the power switch of the wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. Pilih sumbu koordinat: Pencet terus tombol Aktifake, toggle the axis selection switch, and select the axis you want to operate.
3. Pilih Magnifikasi: Pencet terus tombol Aktifake, toggle the magnification switch,and select the desired magnification level.
4. Ngalih sumbu: Pencet terus tombol Aktifake, Pilih switch pilihan AXIS pilihan, select the magnification switch, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. Pencet terus tombol apa wae, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. Pencet tombol mandeg darurat, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled,release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
7. Yen handwheel ora dilakokno sajrone wektu, it will automatically enter sleep mode to reduce power consumption. Yen digunakake maneh, the handwheel can be activated by pressing the enable button.
8. Yen tangan tangan ora digunakake kanggo wektu sing suwe, it is recommended to switch the handwheel shaft to the OFF position, mateni kekuwatan tangan, and extend the battery life.

8. Katrangan Model Produk

① :ZTWGP represents the appearance style
②：Parameter output pulsa:
01: Indicates that the pulse output signal is A, B; Pulsa voltase 5V; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; Pulsa voltase 5V; pulse quantity 100PPR.
04：Nuduhake output sirkuit sing kurang murah, Kanthi sinyal output pulsa saka A lan B;The number of pulses is 100PPR.
05：Nuduhake output sumber PNP sing dhuwur, Kanthi sinyal output pulsa saka A lan B; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 nggantosi 2 axes.
④：Represents the type of axis selection switch signal, A nggambarake sinyal output output titik-titik, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, A nggambarake sinyal output output titik-titik, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 nggantosi 2 custom buttons.
⑦：Represents the power supply for the system handwheel, lan 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

10. Product maintenance

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Aja nganti nyepelekake, Mudhun, nabrak, lsp. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Yen ora digunakake kanggo wektu sing suwe, Mangga simpen tangan ing papan sing resik lan aman. Sajrone panyimpenan lan transportasi, attention should be paid to moisture and shock resistance.

11. Informasi safety

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Yen ndandani dibutuhake, Hubungi pabrikan. Yen karusakan disebabake perbaikan dhewe, Pabrikan ora bakal menehi garansi

]]> Handwheel elektronik wireless Fananc https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Mei 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Pambuka Produk

Tangan tangan elektronik nirkabel digunakake kanggo tuntunan manual, posisi, tool alignment,and other operations on CNC machine tools. Produk iki nggunakake teknologi transmeless nirkabel, Ngilangi Sambungan Kabel Musim semi Tradisional, nyuda gagal peralatan sing disebabake kabel, eliminating the disadvantages of cable dragging and oil stains, and making operation more convenient. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,Magnifikasi, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Fitur Produk
1. Teknologi Komunikasi Wireless Wireless 433MHZ, Jarak Operasi Wireless yaiku 40 meter;
2. Fungsi Frekuensi Hopping Otomatis, Gunakake 32 sets of wireless remote controllers at the same time without affecting each other;
3. Dhukungan tombol mandeg darurat, Output Signal Io, connected to the system through IO wiring;
4. Dhukungan 4 Kancing Custom, Signal IO, sinyal output menyang sistem liwat protokol link;
5. Dhukungan Tombol Gerakan Cepet + lan tombol -, penet terus tombol kanggo ngganti tangan kanggo mindhah mesin;
6. Ndhukung Kontrol 6 Axis, Signal IO, sinyal output menyang sistem liwat protokol link;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Cathetan:
①Emergency stop button:
Pencet tombol mandeg darurat, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Kancing Custom, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Pencet terus tombol Aktifake lan goyangake encoder pulsa kanggo ngirim pulsa
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Diagram aksesoris produk

6.Pandhuan instalasi Produk

6.1 Langkah-langkah instalasi Produk

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Rujuk diagram kabel panrima kita, Bandhingake karo peralatan ing situs sampeyan, lan nyambung
the equipment to the receiver via cables.
3. Sawise panrima tetep, Antena sing dilengkapi karo panrima kudu nyambung,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
It is recommended to place it on the top of the electrical cabinet for the best signal effect. Iku
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Pungkasane, Nguripake saklar daya tangan lan sampeyan bisa ngoperasikake mesin kasebut
handwheel remote control.

6.2 Ukuran Instalasi Panampa

6.3 Diagram referensi wiring wiring panrima

7. Pangopènan lan perawatan

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
layanan layanan;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Aja nganti nyepelekake, Mudhun, nabrak, lsp. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Yen ora digunakake kanggo wektu sing suwe, Mangga simpen tangan ing papan sing resik lan aman;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Mangga maca pandhuan kanthi ati-ati sadurunge digunakake. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Yen ndandani dibutuhake, Hubungi pabrikan. If the damage is caused by self-repair,
the manufacturer will not provide warranty.

]]> Siemens darmabakti handwheel nirkabel elektronik xwgp-ets https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Mei 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Pambuka kontrol remot

A.Product comPosition
Koordinate Tampilan Coordinate Tampilan Nirkabel Wektu Elektronik Nirkabel Time, kalebu rong bagean: handwheel elektronik + panrima;

b.characteristik

*Dhukungan Siemens PLC: S7-200 / -300 / -1200；Ndhukung Real-Time Tampilan sistem koordinasi；
*Jarak transmisi nirkabel mbukak 40 meter, Teknologi FREEPYPEPY GRATIS, bisa digunakake 32 set peralatan ing wektu sing padha;
*Handwheel elektronik dipersembahake dening 2 Baterei AA lan bisa digunakake luwih saka 30 dina;
*Panrima dilengkapi antena eksternal kanggo nambah sinyal lan gampang diinstal;
*Dhukungan Handwheel Elektronik: siji encoder 100ppr 、switch pilihan axis 6-kacepetan 、 siji saklar kecelakaan 3-kacepetan;
*Dhukungan Handwheel Elektronik 6 Kancing Custom, Cocog karo Alamat Siemens Plk, sing bisa didandani kanthi bebas;

*6 Tombol Custom bisa ngontrol 6 ngalih output;
*Tampilan layar nampilake registrasi PLC Corpording Cates ing wektu nyata, and supports 6-axis display of real-time coordinates.

2.Lapangan Aplikasi

Kracak CNC sing bisa digunakake digunakake ing macem-macem lapangan CNC kayata sistem ukiran laser, Mesin Penggilingan CNC, Pusat Mesin CNC, Alat Mesin Gantry, lsp.

3. Pambuka kanggo prinsip kerja

1) Handwheel elektronik disambungake menyang PLC liwat panrima Ethernet

A.Tandhe tanduk ngirim data kunci kanthi nirkabel menyang panrima, lan panrima nyerat tombol liwat area kabel PC PLC System DB; Panampa maca data sing bakal ditampilake saka wilayah DB sing ditetepake, banjur mulihake data menyang layar tampilan tangan. Pangguna bisa ngatur alamat dhasar maca lan nulis wilayah DB ing tuntunan handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. Panrima ndhukung Siemens s7 protokol. Ditrapake kanggo plc s7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Ing mode server, Pangguna ngaturake alamat PLC lan nulis liwat piranti lunak konfigurasi WGP-ETS;Gunakake alat Konfigurasi PLC Confurtrasi kanggo ngatur panrima menyang mode klien. Sawise konfigurasi, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Aplikasi Khusus

Aplikasi Khusus Panrima Handwheel lan Siemens PLC S7-200:

a. Tombol ing tangan tangan cocog karo nilai area bool sing disetel dening pangguna ing PLC. Yen tombol tangan handwheel dipencet, Wilayah bool sing cocog, lan nalika dibebasake, iku palsu, lan Alamat Dasar Wilayah Bool bisa disetel liwat Handwheel;

b. Handwheel bisa maca nilai area DB ing PLC. Siji sumbu duwe 4 Bytes Data Tampilan, lan 6 Axes duwe total 24 Byte. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Pengenalan Penampilan

5.Definisi terminal lan tabel coding panrima

6.Ukuran tampilan

 

 

]]>