5.Product Function Introduction

② Enable buttons on both sides

③Button area

12 bullarum

④ Axis Selection and Magnification Switch

One 9-gear axis selection switch; one 3-gear magnification switch.

⑤ Emergency Stop Switch

Remote control emergency stop switch.

⑥ Display Screen Area

It can display coordinates, status and other information.

⑦ Electronic Pulse Encoder

One electronic pulse encoder with 100 pulses per revolution.

⑧ Type-C Charging Port

It is used for connection between the charger and the remote control.

The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key

6. Product Accessories Diagram

7. Receiver and Wiring Ports

8. Configure network access

9. Test Instructions

1.Product Introduction

2.Product Features

Torcular et tenere ad activare button, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.

④ Pulse Encoder:

Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.

⑤ LCD Display Screen:

5. Product Accessories Diagram

 

6. Product institutionem dux

6.1 Product installation gradus

1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.

2. Refer ad receptaculum Wiring Diagram, Compare cum vestris on-site apparatu, and connect the equipment to the receiver with cables.

3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; aliter, signal failure may occur.

4. Tandem, turn on the remote control power switch, then you can remotely operate the machine via the remote control.

6.2 Receiver Installation Dimensions

6.3 Receptor Wiring reference Diagram

7. Product Operatio Instructions

1. Potestas in machina et accipientis. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.

2. Select the axis : Torcular et tenere ad activare button, toggle the axis selection switch to select the axis to be operated.

3. Select the magnification: Torcular et tenere ad activare button, toggle the magnification switch to select the required magnification gear.

4. Axis movement: Torcular et tenere ad activare button, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.

5. Torcular et tenere consuetudinem button, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.

6. Torcular ad subitis subsisto button, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.

7. If the wireless remote control is not operated for a period of time, statim intrabit modus somni ad redigendum potestatem consummatio. It can be used normally again by pressing the enable button again.

8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life

8. Product Model Description

①：UWGP stands for appearance style.

②：Pulse Output Parameters：

05: Indicat summus gradu PNP Source output, et pulsum output annuit de et b; The number of pulses is 100PPR.

③：Represents the axis selection switch quantity; 6 stands for 6 secures, 7 stands for 7 secures, and so on.

④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.

⑥: Significat numerum consuetudinis globulis; 3 corresponds to 6 custom buttons.

⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, et 24 stands for 24V power supply.

⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.

9. Product Troubleshooting

 

10. Maintenance and upkeep

1. Please use it in a dry environment at room temperature and pressure to extend its service life.

2. Please avoid using in abnormal environments such as rain and water to extend the service life.

3. Please keep the appearance of the remote control clean to extend its service life.

4. Please avoid crushing, dropping, or bumping, etc.. to prevent damage to the precision components inside the remote control or accuracy errors.

5. Nisi non propter diu, please store the remote control in a clean and safe place.

6. Avoid moisture and shock during storage and transportation.

1.Product Introduction

Wireless Electronic Handwheel adhibetur ad manual duce, positus, instrumentum occasum
Alia Operations CNC Machina Tools. Hoc productum adoptat wireless tradenda technology,
Eliminating in traditional vere filum nexu, Reducing apparatu defectis per cables,
Eliminating in incommoda funem trahit, oleum maculas, etc., et commodius est
agito. Est late in cnc machina talis ut gantry machining centers, gantry
Vertical Lathes, CNC Gear Processing Machines, et accommodata varietate cnc
Systems in foro, ut siemens, Mitsubishi, Fanuc, Synec et alia Cnc Ratio
brands.

2.Product Features

1. 433MHz adopt Wireless Communication Technology, Wireless operatio procul est 80 metris;
2. Adopt automatic frequentius salit munus, usurpo 32 Sets wireless remotis moderatoris ad
simul sine invicem;
3. Support subitis subsisto button, Et post handwheel est off, Et subitis subsisto
Button adhuc valet;
4. Subsidium 6 Custom Bullae, SWITCH IO signum output;
5. Support VI, axis imperium, 7-12 axis potestate potest esse customized;
6. Sustinet 1x,10X, 100X potestate et potest esse maximum customizable 1000x;
7. Sustinet ad activare Puga pyga, output switch l0 Sianals. Axis lectio,maanificacio
et encoder.;
8. Support axis lectio magnificatio lectio encoder output;
9. Support Standard genus-C, 5V-2a præcipiens specificationem, Built-in altilium specificationem
14500/1100mAh.

3.Product Specifications

4.Product munus introductio

Nota：
①Mergency subsisto button：
Quando subitis subsisto button instare, duos subitis subsisto i outputs in
Receptor est disconnected, Et omnes handwheel munera sunt irritum. Cum subitis
Nolite dimisit, Et subitis subsisto IO output in recipientis clausa est, et omnes handwheel
munera sunt restaurata; Et post handwheel est off, Et subitis subsisto i output
of the receiver is still valid when the emergency stop button is pressed.

②enable button:
Utrimque utrimque utrimque instare aliquem, et duos coetibus enable io
outputs in recipientis erit conversus in. Release ad activare button et enable i
output et convertit off. Praeter, Vos postulo ut torcular et tenere ad activare puga pyga coram
Switching axis lectio Ratio et excutiens Handwheel. Hoc munus potest esse
canceled through the configuration software.
③axis selectio switch (Power SWITCH):
Torcular et tenere enable puga switch axis selection switch ad
Movens axis imperium per handwheel. Switch hoc switch ab off ad axem et
turn on the handwheel power.

④Pulse encoder:
Torcular et tenere enable puga pyga et pulsus encoder mittere pulsus
signal to control the movement of the machine axis.

⑤battery indicator:
De manu rotam potentia ostentationem, Omnia clara significat plenum potestatem, Omnes off significat non
conversus in vel habet potestatem, Primum sinistram eget fulguris, significans quod potentia humilis,
please charge in time.
⑥signal luminaria:
Si signum lucem est, Hoc est quod handwheel est operated et signum est
normalis; Si signum lucem est off, Hoc est non est operatio, aut est operated nisi
the wireless signal is not connected.

5.Product Books Diagram

6.Product institutionem dux

6.1 Product installation gradus
1. Install in recipientis in electrica scrinium usura clips in tergum, aut install in
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Refer ad receptaculum Wiring Diagram, Compare cum vestris on-site apparatu, et coniungere
the equipment to the receiver via cables.
3.Post receptam fixa, In antenna instructa cum recipientis est connected,
et extrema Antennae esse installed vel extra electrica scrinium. Eam
Commendatur ponere super summitatem electrica scrinium optimum signum. Est
Vetiti relinquere Antennae intus antenna intra electrica scrinium,
which may cause the signal to be unusable.
4. Tandem, Turn in Handwheel Power Switch et vos can operari machina a
handwheel remote control.

6.2 Receptor installation dimensiones

6.3 Receptor Wiring reference Diagram

7.Product Operatio Instructions
1. In apparatus est powered, Receptor est Powered, Et accepit working indicator
lucem fulguris, Et Wireless Electronic Handwheel habet altilium installed, In altilium operimentum
est alligatum, Et Wireless Electronic Handwheel Power Switch est in, et
Handwheel potentia lux est in;
2. Select ad coordinare axem: Torcular et tenere ad activare button, switch ad axem lectio
switch, Et eligere axis vis operari in;
3. Select Magnification: Torcular et tenere ad activare button, Switch magnificationis switch,
Et eligere magnificationem gradu vos postulo;
4. Movens axis: Torcular et tenere ad activare button, Eligere axis selection switch, selego
et magnificatio switch, Et rotatethe pulsae encoder ad gyrari positivum movens axem
clockwise et negans axis counterclockwise;
5. Torcular et tenere consuetudinem button, et correspondentes button IO output de
Receptor et conversus in. Dimittere puga pyga ut averte de output;
6. Torcular ad subitis subsisto button, et correspondentes emergency subsisto i output de
Receptor est disconnected, Handwheel munus est disabled, Release in subitis subsisto
button, Et subitis subsisto i o output est clausit, Et handwheel munus restituatur;
7. Nisi handwheel non operatur ad tempus, Hoc mos statim intra somnum
Modus ad redigendum potentia consummatio. Cum autem adhibetur iterum, Handwheel esse potest
Activated instabat ad activare button;
8. Nisi handwheel non propter longo tempore,Commendatur ad Switch Handwheel
Shaft in off position, Averte Handwheel Power, and extend the battery life.

8.Product Model Description

① ：DWGP repraesentat species style

② ：Pulsum output parametri:
01: Indicat quod pulsus output signals sunt et b, Et pulsum voltage est 5V; Pulsus
100PPR quantitas;
02: Indicat quod pulsus output signals sunt et b, et pulsum voltage 12V; Pulsus
25PPR quantitas;
03: Indicat quod pulsus output signum est b、A-、B-； Pulsum voltage 5v; Pulse quantity 1
00Ppr;
04: Indicat humili gradu NPN aperto Circuit output, et pulsum output annuit de et b; in
numerus pulsus est 100ppr;05: Indicat summus gradu PNP Source output, Pulsum output annuit
sunt et b; Pulsus quantitas est 100PPR;
③ : Repraesentat numerum axis switches, 6 represents 6 axis, 7 represents 7 axis.
④ : Repraesentat genus axis lectio switch signum, Et repraesentat punctum-ut-punctum output signum,
B repraesentat encoded output signum;

⑤ : Repraesentat genus magnificationis switch signum,
Et repraesentat punctum-ut-punctum output signum, B repraesentat encoded output signum;
⑥ : Repraesentat numerum mos buttons, 6 represents 6 Custom Bullae;
⑦ : repraesentat potentia copia ad ratio handwheel, 05 Power Repraesentat 5V,
et 24 represents 24V power supply.

9.Product Troubleshooting

10. Tutela et cura

1. Quaeso uti in sicco environment ad locus temperatus et pressura ad extend ad servitium vitae;
2. Quaeso vitare usura in abnormes environments talis pluvia et aqua bullae extendere ministerium vitae;
3. Obsecro speciem Handwheel mundus extendat ministerium vitae;
4. Quaeso ne excerpent, procidens, bumping, etc.. Ne damnum ad praecisionem components intus
Et Handwheel aut accuracy errores;
5. Nisi non propter diu, Placere copia handwheel in mundum et tutum est;
6.Per repono et translationem, attention should be paid to moisture and shock resistance.

11.Salus notitia

1. Placere legunt instructiones diligenter ante usum et prohibere non doctorum ex operating;
2. Cum altilium gradu nimis, Placere arguere tempore vitare errores per insufficiens
Pugna et impotentia agunt in handwheel;

3. Si reficere non requiritur, Placere contact fabrica. Nisi damnum est causa sui reparatione, the manufacturer will not provide warranty.

1.Product Introduction

Programmabile CNC potestate remota PHB06B apta est pro wireless
remota operatio diversarum systematum CNC. Sustinet users to
customize programming and develop button functiones ut animadverto remote
imperium variarum functionum in systematis CNC; sustinet users to
customize programming and develop proponere contenta cognoscendi dynamicam
ostentationem ratio status; in remotis imperium venit cum rechargeable
battery and supports Type-C interface charging.

2.Product Features

1. Uti 433MHZ wireless communicationis technologiae, in wireless operandi
procul est 80 metris;
2. Utens automatic munus frequency circumsiliens, 32 ponit wireless remotum
moderatoris adhiberi possunt simul sine invicem;
3. Subsidium 12 custom programming button;
4. Support 2.8 inch screen, ostentationem contenti mos programming;
5. Subsidium 1 6-celeritas axis electionis transitum, quod potest esse consuetudo programmatum;
6. Subsidium 1 7-celeritas magnificatio switch, quod potest esse consuetudo programmatum;
7. Subsidium 1 electronic handwheel, 100 pulsus / rursus;
8. Support Standard genus-C; 5V-2a præcipiens specificationem; altilium
specification 18650/12580mWh battery.

3.Opus

4. Product Specifications

5.Product munus introductio

Nota：
Power switch：
Imperium manu rotam aperire et claudere

-Admitte bullarum in utrimque：
Button enabling ut crank manum rotam premi debet;

Custom button area
12 globulis disposita 3X4, user definire programming;

Axis lectio, magnificatio switch
1 6-positio axis lectio transitum, quod potest nativus et programma;
1 7-situm ratio transitum, quod potest nativus et programma

Subitis subsisto switch:
Handwheel subitis subsisto switch;

Propono area:
Potest current potestatem, signum, et nativus propono contentus;

Electronic rota manu：
1 electronic handwheel, 100 pulses/turn.

portum incurrentes:

Inaedificata rechargeable eu altilium, praeceperat per Type-C patina, præcipiens intentione 5V,
current 1A-2A; præcipiens tempus 7 horulus;

6.Product Books Diagram

7.Product institutionem dux

1. Receptaculum in USB inserere in computatrum, computer mos automatically
agnoscis et install USB fabrica coegi sine manual institutionem;
2. Remota imperium in inserere in patina. Post altilium plene comminatus est, vertere
in virtute switch, Turn in remotis imperium, et ostendit normalem, quod "
per potentiam in succedit;
3. Post posse on, quis felis operationem praestare potes. Remota imperium can
button operatio simul duo support. Cum quis premere puga, nigrum
quadratum erit iuxta signum in remotis potestate, significans ipsum
is valid.

8.Product Operatio Instructions
Antequam productum progressionem et usum, Demo software uti potes ut nos experiamur
globulis et ostentatione remota potestate, aut uti Demo ut referat exercitatione for
futurum programming progressionem;
Ante usura software est Demo, obsecro plug USB recipientis in computatrum, facere
scrutare si remote controlatoris satis habet potestatem, Turn in virtute switch, tum uti;
Cum quis felis in remotis imperium premitur, in test software Demo ostentant
respondentem clavem valorem. Post dimittis eam, key valorem ostentationem evanescit, significans
the button upload is normal.

9.Product Troubleshooting

10. Tutela et cura

1. Quaeso utere ea in arido environment cum temperatura et pressione normalis ad extend
in servitio vitae;
2. Noli uti acutis objectis tangere clavem aream ad prorogare vitam servitii clavis;
3. Conserva clavis area munda ad redigendum clavis lapsum;
4. Vitare expressi et procidens ad damnum causa in remotis imperium;
5. Nisi non propter diu, Quaeso remove altilium et reponunt remote imperium ac
altilium in mundum et tutum locum;
6. Pay attention to moisture-proof during storage and transportation.

11.Salus notitia

1. Lege diligenter ante usum instructiones. Non professionales prohibentur
from operating.
2. Quaeso uti prima patina vel patina producta a iusto opificem cum
the same specifications.
3. Quaeso crimen in tempore ad vitare falsa operatio propter insufficiens potentiam causandi
the remote control to be unresponsive.
4. Si reficere non requiritur, Placere contact fabrica. Si damnum fecit per
auto-reficere, the manufacturer will not provide warranty.

1.Product Introduction

Programmabile CNC potestate remota PHB10 apta est pro wireless
remota operatio diversarum systematum CNC. Sustinet user-defined
programming ut develop button munera, et animadverto varius imperium remote
munera in CNC systematis; user definiri non sustinet ut develop programming
DUXERIT luminaria lux et averte, cognoscite admodum ostentationem ratio status;
remota potestate venit cum rechargeable altilium ac subsidiis Type-C
interface charging.

2.Product Features

1. Uti 433MHZ wireless communicationis technologiae, in wireless operandi
procul est 80 metris;
2.Utens automatic munus frequency circumsiliens, 32 ponit wireless remotum
moderatoris adhiberi possunt simul sine invicem;
3.Subsidium 32 custom programming button;
4.Subsidium 9 consuetudo DUXERIT lux propono programmatio;
5.Support IP67 IMPERVIUS level;
6.Support vexillum Type-C interface præcipiens; 5V-2a præcipiens specificationem;
1100 mAh magnam facultatem altilium, latis somno sto munus; animadverto
ultra-diu humilis potentia standby;
7.Support real-time display of power.

3.Opus

4. Product Specifications

5.Product munus introductio

Nota：
Attilium gradu ostentationem：
Illuminat cum potentia in, volvitur post virtutem longe;
Si altilium indicator lux est una tantum vectis et coruscum servat, id est
Pugna preme. Quaeso reponere in altilium;

Si pugna indicator luminaria omnes et alter ducatur luminaria retro et
foras, Pugna nimis significat. Quaeso reponere in altilium;
Si altilium indicator non illustrare vel egredi, et in fabrica non potest
coepi deprimendo et tenentes potentiam button, Placere reponere in altilium;

Puga pyga area：32 globulis disposita 4X8, user definire programming;

Status LED：
COMMU: Button indicator lux, accendit cum ipsum premitur et vadit "
ex quo ipsum non dimisit; alia luminaria consuetudine ostendit;

Power switch：
Donec press for 3 seconds ad conversus in, dum press for 3 seconds ad declinemus;
portum incurrentes：
Usus Type-C patina ad crimen, præcipiens intentione 5V, current 1A-2A; praecipiens
tempus 3-5 horulus;

cum stultum, potestas indicator fulguris coruscantis, significans quod stultum est. cum
plene comminatus, the power indicator will show full bar without flashing.

6.Product Books Diagram

7.Product institutionem dux

1 . Ego nsert USB in computatrum receptor, computer mos automatically
agnoscis et install USB fabrica coegi sine manual
2. Remota imperium in inserere in patina. Post altilium plene comminatus est, torcular "
ac potestatem puga 3 seconds. Imperium longinquus vertetur et potestas
indicator erit lux est, indicating that the power-on is successful.
3. Post posse on, quis felis operationem praestare potes. Remota imperium
Duo operatio potest sustinere button simul. Cum quis premere puga, in
COMMU lux in remotis imperium accendet, indicating that this button is valid.

8.Product Operatio Instructions
Antequam productum progressionem et usum, demo software uti potes ut nos providemus
explorare bullarum in remota potestate et lucem e longinquo. potes
also use the demo as a reference routine for future programming development.
Ante usura software est Demo, obsecro plug USB recipientis in computatrum,
fac remote control habet sat, torcular et tenere potestatem puga t *
tun eam, tum uti;
Cum quis felis in remotis imperium premitur, in test software demo ostendam "
ad valorem key correspondentes. Post dimittis eam, key valorem ostentationem evanescit,
significans clavis eget sit normalis;
Potes etiam eligere lucem duxerunt numerum in test software demo, click download,
et respondens numerus levis in potestate remota illustrabit, significans
LED light is downloading normally.

9.Product Troubleshooting

10. Tutela et cura

1. Quaeso utere ea in arido environment cum temperatura et pressione normalis ad extend
in servitio vitae;
2. Noli uti acutis objectis tangere clavem aream ad prorogare vitam servitii clavis;
3. Conserva clavis area munda ad redigendum clavis lapsum;
4. Vitare expressi et procidens ad damnum causa in remotis imperium;
5. Nisi non propter diu, Quaeso removere altilium et reponunt remotis imperium
et altilium in loco mundo ac tuto;
6. Pay attention to moisture-proof during storage and transportation.

11.Salus notitia

1. Lege diligenter ante usum instructiones. Non professionales prohibentur
operating.
2. Quaeso uti prima patina vel patina a iusto fabrica cum
same specifications.
3. Quaeso crimen in tempore ad vitandum falsam operationem propter insufficiens potentiam causando
remote control to be unresponsive.
4. Si reficere non requiritur, Placere contact fabrica. Si damnum est causa per auto-reparatione,
the manufacturer will not provide warranty.