Specifica application ad Siemens – Wixhc Technology https://www.wixhc.cn Industria Dux Wed, 05 Nov 2025 06:21:59 +0000 la hourly 1 https://wordpress.org/?v=6.8.3 Wired electronic handwheel Instructio Manual https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Product Introduction

Electronic handwheel is used for manual guidance, positus, instrumentum Gratia diei et noctis, et aliae operationes instrumentorum machinarum in CNC. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnificatio, buttons, andother signals through communication.
2.Product eget features
1. Uti VI-core aviation obturaculum funem pro nexu, cum handwheel funem longitudinem 10 meters.
2. Handwheel screen propono ratio workpiece coordinatas, mechanica coordinatae,feed rate, Axis lectio, magnificatio, and other information.
3. Support subitis subsisto button, SWITCH IO signum output, and the hand wheel shutdown emergency stop is still valid.
4. Subsidium 6 Custom Bullae, IO annuit switch, and can output signals to the system through IO wiring or communication.
5. Subsidium 6 vel 8 axis imperium, with switch IO signals that can be output to the system through IO wiring or communication.
6. Subsidium 3 vel 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Suscipe venae encoder, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Product Specifications
Handwheel working power supply voltage DC24V/1A
Receptoris potentia copia voltage DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10m
Receiver end cable length 1m
Receiver end network cable length 3m
Operating temperature -25℃<X<55℃
Anti-fall height 1m
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.Product munus introductio

Nota:
Emergency stop button:
Torcular ad subitis subsisto button, et binos casus necessitatis statur IO outputs in recipiente disiungitur, and all functions of the handwheel will be invalid.
After releasing the emergency stop, Et subitis subsisto IO output in recipientis clausa est, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Custom Bullae, inter se correspondentes ad IO output punctum in recipiente, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Torcular et tenere ad activare button, agitabit pulsus encoder, emittunt pulsum signum, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Product Accessory Diagram

6. Product institutionem dux
6.1 Installation gradus productum
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Recipe ad acceptorem wiring diagram et compara cum apparatu tuo on-site. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Post taxationem accipit, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Receptor installation dimensiones

6.3 Installation dimensions of aviation plugs

6.4 Receptor Wiring reference Diagram
7.Product Operatio Instructions

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Select Magnification: Switch the magnification switch and select the magnification level you need.
7. Movens axis: Torcular et tenere ad activare button, Eligere axis selection switch, magnificationem switch eligere, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Torcular ad subitis subsisto button, IO subitis subitis subsisto in recipientis output disiungitur, munus in handwheel erit erret, subitis subsisto in button dimittere, io subitis subsisto in output claudentur, and the handwheel function will be restored.
8.Product Model Description

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : Repraesentat numerum axis switches, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Sustentationem
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Quaeso ne excerpent, procidens, bumping, etc.. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Nisi non propter diu, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Salus notitia

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Si reficere non requiritur, Placere contact fabrica. Nisi damnum est causa sui reparatione, Et manufacturer non providere warantum

 

]]> Dedicated wireless remotis pro cnc vertical Lathe Operatio Instructions https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Product Introduction

Dedicatum wireless contro remotum pro lesti verticali CNC pro directione manuali adhibetur, positus, instrumentum occasus, et aliae operationes instrumenta machinae verticalis CNC. Hoc productum adoptat wireless tradenda technology, necessitatem eliminatis e vitre wirae traditionum, Reducing apparatu defectis per cables, et incommoda funes trahens et maculas oleum eliminat, faciens operationem commodius. Variis laminis verticalibus late applicatum est ut lesti CNC verticalis, unius columna vertical lesti, et duplex columna verticalis lathes. Etiam aptari potest variis systematibus CNC in foro, ut siemens,
Mitsubishi, Fanuc, and Syntec.

2. Product eget features

1. inito 433 MHz wireless communicationis technologiae, cum wireless operating spatium of * 40 meters.
2.Inito automatic frequentia munus circumsiliens atque utens 32 sets of wireless remotis moderatoris simul, without affecting each other.
3. Support subitis subsisto button, switch IO signal output.
4. Subsidium 2 Fusce Bullae, with switch-type IO signal output.
5. Subsidium -2 axis control.
6. Supports 3-level magnification control.
7. Suscipe enable button munus, quod potest output in / off IO annuit et imperium axis lectio, multiplicato factor, et encoder.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Pulsus subsidia encoder, per speciem 100 pulses per revolution.
3. Product Specifications
Operans intentione et impetu wireless remote
3V/14MA
Pugna specifications 2 AA alcalina batteries, size 5
Low intentione terror range of wireless remote < 2.3V
Receptoris potentia copia voltage DC5V-24V/A
Receptorem subitis stop output onus range AC125V-1A/DC30V-2A
Receptorem enable range output onus
AC125V-1A/DC30V-2A
Button receptoris mos output onus range DC24V/50mA
Receptator axis electionis output onus range DC24V/50mA
Receptator magnificationis output onus range DC24V/50mA
Tradere potestatem orci terminalis
15dBm
Receptoris perceptio sensus -100dBm
Wireless communicationis frequency 433MHz frequency band
Wireless communicationis spatium Obex liberum spatium 40 metris
Operatio temperatus -25℃ < X < 55℃
Anti ruina altitudo 1 (meter)
Custom button quantitas 2
4. Product Function Introduction



Nota:

Pulsus encoder:
Torcular et tenere ad activare button, agitabit pulsus encoder, emittunt pulsum signum,and control the movement ofthe machine axis.
Admitte button:
Torcular aut possit puga hinc, et binae efficiat IO outputes in accipiente deducet. Dimittis ad enable puga pyga disiungo ad enable IO output; Et ante axis electionem commutans magnificationem et manus rotam quatiens,ad enable felis eget teneri ad efficax; This function can be cancelled through configuration software.

Testimonium luminaria:
Lucem sinistram: potentia in lumine,handwheel utitur axis ad eligere ON in potentia, et hoc lumen remanet post potentiam;
Media lux: signum lucis quae illuminat cum operando aliquem functionem eumdem handwheel, et non inluminat, cum nulla operatio est;
Dextra parte lux: Minimum voltage terror lucis, Maximum pugna gradu ",hoc lightflashes vel singulas, battery needs to be replaced.

Subitis subsisto puga:
Torcular ad subitis subsisto button, et binos casus necessitatis statur IO outputs in recipiente disiungitur, and all functions of the handwheel will be invalid.

Magnificatio switch:
Torcular et tenere ad enable puga mutandae magnificationis switch, which can switch the magnification controlled by the handwheel.

Axis lectio switch (Power SWITCH):
Torcular et tenere enable puga mutandae axis lectio transitum, quae motus axis potest flectendum est a handwheel refrenat. Switch this switch from OFF to any axis and turn on the handwheel power.

Custom button:
Duo consuetudo bullarum, each corresponding to an IO output point on the receiver.

5. Product Accessory Diagram

6. Product institutionem dux
6.1 Installation gradus productum

1. Install receptaculum in electricum scrinium per fibula a tergo, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Recipe ad acceptorem wiring diagram et compara cum apparatu tuo on-site. Connect the equipment to the receiver via cables.
3.Post accipientem recte certum est, In antenna instructa cum recipientis est connected, et antennae extremum extremum extra electricum scrinium institui vel collocari oportet. Commendatur ponere super summitatem electrica scrinium optimum signum. Prohibetur antennas disiunctas relinquere vel intra electricum scrinium ponere, as this may result in the signal being unusable.
4. Tandem, conversus in virtute switch ad handwheel, and you can operate the machine remotely using the handwheel.

6.2 Receptor installation dimensiones

6.3 Receptor Wiring reference Diagram

7. Product Operatio Instructions
1. Potestas in machina et accipientis. Indicatur opus fulgurum lucis accipientis. Install in altilium in in wireless electronic handwheel, ab secure altilium operimentum, et
conversus in virtute switch in wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. Select ad coordinare axem: Torcular et tenere ad activare button, toggle axi delectu transitum, and select the axis you want to operate.
3. Select Magnification: Torcular et tenere ad activare button, magnificationem switch toggle,and select the desired magnification level.
4. Movens axis: Torcular et tenere ad activare button, Eligere axis selection switch, magnificationem switch eligere, et gyrari pulsus encoder. Gyrari horologico movere
positive axis and counterclockwise to move the negative axis.
5. Torcular et tenere consuetudinem button, et conjunctionem respondentem IO output recipientis convertetur in. Dimitte puga, and the output will be turned off.
6. Torcular ad subitis subsisto button, IO subitis subitis subsisto in recipientis output disiungitur, munus in handwheel erit erret,subitis subsisto in button dimittere, io subitis subsisto in output claudentur, and the handwheel function will be restored.
7. Nisi handwheel non operatur ad tempus, statim intrabit modus somni ad redigendum potestatem consummatio. Cum autem adhibetur iterum, the handwheel can be activated by pressing the enable button.
8. Nisi handwheel non propter longo tempore, Commendatur ad artem handwheel artem ON situm, Averte Handwheel Power, and extend the battery life.

8. Product Model Description

① :ZTWGP significat speciem style
②：Pulsum output parametri:
01: Signum pulsus output indicat esse A, B; Pulsum voltage 5v; pulse quantity 100PPR.
02：Significans pulsus output signa esse A et B; Pulsus intentione 12V; pulse quantity 100PPR.
03：Significans pulsus output signa sunt A, B, A -, B -; Pulsum voltage 5v; pulse quantity 100PPR.
04：Indicat humili gradu NPN aperto Circuit output, et pulsum output annuit de et b;The number of pulses is 100PPR.
05：Indicat summus gradu PNP Source output, et pulsum output annuit de et b; The number of pulses is 100PPR.
③：Repraesentat numerum axis delectu virgas, 2 represents 2 axes.
④：Significat genus signo switch axis delectu, Et repraesentat punctum-ut-punctum output signum, and B represents encoded output signal.
⑤：Significat genus multiplicationis switch signum, Et repraesentat punctum-ut-punctum output signum, and B represents encoded output signal.
⑥：Significat numerum consuetudinis globulis, 2 represents 2 custom buttons.
⑦：Repraesentat potentiam copiam ad systema handwheel, et 05 represents 5V power supply.
⑧：L significat sinistram columnae (sinistra cultro possessor), et R repraesentat columna dextra (dextra cultro possessor).

9.Solutio ad Product technicorum

10. Product sustentationem

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Quaeso ne excerpent, procidens, bumping, etc.. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Nisi non propter diu, Placere copia handwheel in mundum et tutum est. Per repono et translationem, attention should be paid to moisture and shock resistance.

11. Salus notitia

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Si reficere non requiritur, Placere contact fabrica. Nisi damnum est causa sui reparatione, Et manufacturer non providere warantum

]]> Fanuc dedicated wireless electronic handwheel https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Ut 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Product Introduction

Wireless Electronic Handwheel adhibetur ad manual duce, positus, instrumentum Gratia diei et noctis,et aliae operationes instrumentorum machinarum in CNC. Hoc productum adoptat wireless tradenda technology, Eliminating in traditional vere filum nexu, Reducing apparatu defectis per cables, incommoda funis eliminare trahere et maculas olei, et faciens operationem commodius. Hoc exemplar handwheel wireless electronic est handwheel dedicatum ad systema Fanuc. Coordinatae systematis Fanuc realis tempore monstrantur in screen per manus IO-LINK protocollum, et axi delectu,magnificatio, et signa conjunctionis cum systemate per IO-LINK protocollum directe conexum coniunguntur, reducing wiring.

2. Product Features
1. 433MHz adopt Wireless Communication Technology, Wireless operatio procul est 40 metris;
2. Adopt automatic frequentius salit munus, usurpo 32 disponere wireless remotis moderatoris simul sine affectione se;
3. Support subitis subsisto button, SWITCH IO signum output, coniungitur ratio per IO wiring;
4. Subsidium 4 Custom Bullae, SWITCH IO signum, output signum ad systema per io link protocol;
5. Support Velox motus button + et button -, Torcular et teneat ipsum reponere Handwheel movere machina;
6. Support VI, axis imperium, SWITCH IO signum, output signum ad systema per io link protocol;
7. Support 1X,10X, 100X imperium . Support switch l0 signo, et outputs systematis annuit per IO-LINK protocol;
8. Support enable button munus, coniungere ad systema per IO wiring, et potestatem encoder enable simul;
9. Suscipe venae encoder, 100 pulsus / circulus, accessum systema MPG handwheel interface ab outputting AB modum translitterandi signum;

3.Product Specifications

4.Product Features

Nota:
①Mergency subsisto button:
Torcular ad subitis subsisto button, duo subitis stop IO outputs in recipiente disiungitur, et omnia functiones handwheel sunt invalid.Post subitis statur dimittitur, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

Screen ostentationem:

Custom Puga:
4 Custom Bullae, per conjunctionem correspondet IO output punctum in recipiente, coniungitur ratio per IOLINK. Fere, the ~ button is set as a high-speed button.
Axis lectio switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
Brevis bullarum:
Preme brevis button "+" machina movere deinceps, et premere puga brevis Conscidisti "-" machina negative ad movere. This can replace turning the hand wheel to move the machine.
-Admitte button:
Premere et tenere unamquamvis e globulis utrobique effice et agitabit pulsum encoder ut efficax sit. Et duo circuli ex IO outputs in accipientis convertantur. Release the enable button and the enable IO output is disconnected.
Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
Pulse encoder:
Torcular et tenere enable puga pyga et pulsus encoder mittere pulsus
signal to control the movement of the machine axis.
Power switch:
Handwheel power button.

5.Product Books Diagram

6.Product institutionem dux

6.1 Product installation gradus

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Refer ad receptaculum Wiring Diagram, Compare cum vestris on-site apparatu, et coniungere
the equipment to the receiver via cables.
3. Post receptam fixa, In antenna instructa cum recipientis est connected,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Commendatur ponere super summitatem electrica scrinium optimum signum. Eam
prohibetur antennae separatae vel antennae intra electricum scrinium ponere,
which may cause the signal to be unusable.
4.Tandem, Turn in Handwheel Power Switch et vos can operari machina a
handwheel remote control.

6.2 Receptor installation dimensiones

6.3 Receptor Wiring reference Diagram

7. Tutela et cura

1. Quaeso utere ea in ambitu sicco cum temperatura et pressione normali ad extendendum
servitium vitae;
2. Quaeso vitare usura in abnormes ambitibus sicut pluviae et aquae bullae ad extendendum
in servitio vitae;
3. Conserva speciem handwheel mundati ad vitam servitutis extendere;
4. Quaeso ne excerpent, procidens, bumping, etc.. ne damnum ad subtilitatem partium
intra handwheel vel subtilitas errorum causa;
5. Nisi non propter diu, Placere copia handwheel in mundum et tutum est;
6. Pay attention to moisture and shock during storage and transportation.

8. Securitatis Information

1. Lege diligenter ante usum instructiones. Non professionales prohibentur
operating.
2. Quaeso reponere altilium quando pugna nimis humilis ad vitare errores per
insufficient power causing the handwheel to be unable to operate.
3. Si reficere non requiritur, Placere contact fabrica. Si damnum est causa per auto-reparatione,
the manufacturer will not provide warranty.

]]> Siemens dedicated wireless electronic handwheel Xwgp-Ets https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Ut 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Introductio remota potestate

a.Product Composition
Siemens real-time coordinare propono wireless electronic handwheel ex duabus partibus constat: electronic handwheel + accipientis;

b.Characteristics

*Support Siemens PLC: S7-200 / -300 / -1200；Support realis-vicis ostentationem de Siemens ratio coordinare values；
*In Wireless Transmissus distantia aperta 40 metris, Lorem frequency circumsiliens technology, potest 32 apparatu simul;
*Handwheel electronic powered by 2 AA gravida et plus quam adhiberi potest 30 dies;
*Receptaculum externa antennae ad signum augendae instructum et facile est instituere;
*Electronic handwheel firmamentum: Unum 100PPR encoder 、Unum VI, celeritate axis selectionem switch 、 Unum III, celeritate magnificationis switch;
*Electronic handwheel subsidia 6 Custom Bullae, correspondentes Siemens PLC oratio, Quod potest esse sponte programmed;

*6 Custom Bullae potest control 6 switch outputs;
*Propono screen ostendit PLC correspondentes mandare coordinatum valorem in reale tempus, and supports 6-axis display of real-time coordinates.

2.Applicationem agri

CNC programmabile imperium remotum late in variis CNC campis, ut laser insculptis, late adhibetur, CNC Milling Machina, CNC Machining Center, gantry instrumentum machina, etc.

3. Introductio ad principium operativum

1）Electronic handwheel iungitur PLC per receptaculum Aer

a.The handwheel tradit key notitia wirelessly ad recipientis, et accipiens claves scribit per funem retis PLC system DB area; accipientis legit notitia proponendum ex designato DB area, et refert notitia ad handwheel ostentationem velum. Usor potest domicilii basim inscriptionem legendi et scribendi DB in area in handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. Siemens S7 protocollo receptor sustinet. Ad PLC S7-200, PLC S7-300 and PLC S7-1200.

c*. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

In servo modus, usor configurat PLC inscriptionem legere et scribere per WGP-ETS configurationem programmatis;Utere PLC connexionis configuratione instrumentum configurare accipientem in modum clientis. Post configuratione, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Imprimis application

Imprimis applicatio manus rotae recipientis et Siemens PLC S7-200:

a. Bulla in handwheel respondet quantitati BOOL area ab usore in PLC. Si puga handwheel pressed, in area correspondentes BOOL verum, ac dimittitur, falsum est, et basis inscriptionis BOOL area per handwheel erigi potest;

b. Handwheel valorem DB area in PLC legere potest. Una axis est 4 ostentationis data bytes, et 6 secures habent summa 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Aspectus introductio

5.Receptoris terminatio definitionis et mensae coding

6.Aspectus magnitudine

 

 

]]>