ຄໍາຮ້ອງສະຫມັກສະເພາະສໍາລັບ siemens – Wixhc ເທັກໂນໂລຢີ https://www.wixhc.cn Industry Leader Wed, 05 Nov 2025 06:21:59 +0000 lo hourly 1 https://wordpress.org/?v=6.8.3 Wired electronic handwheel Instruction Manual https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. ການແນະນໍາກ່ຽວກັບຜະລິດຕະພັນ

Electronic handwheel is used for manual guidance, ການຈັດຕໍາແຫນ່ງ, ການຈັດລຽນເຄື່ອງມື, ແລະການປະຕິບັດງານອື່ນໆກ່ຽວກັບເຄື່ອງມືເຄື່ອງຈັກຊີເອັນຊີ. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, ຂະຫຍາຍ, buttons, andother signals through communication.
2.Product functional features
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 meters.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, ການຄັດເລືອກ Axis, ຂະຫຍາຍ, and other information.
3. ສະຫນັບສະຫນູນປຸ່ມຢຸດສຸກເສີນ, ປ່ຽນສັນຍາ IO IUTER, and the hand wheel shutdown emergency stop is still valid.
4. ອະນຸຍາດ 6 ປຸ່ມປະເພນີ, switch IO signals, and can output signals to the system through IO wiring or communication.
5. ອະນຸຍາດ 6 or 8 ການຄວບຄຸມແກນ, with switch IO signals that can be output to the system through IO wiring or communication.
6. ອະນຸຍາດ 3 or 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. ສະຫນັບສະຫນູນການເຂົ້າລະຫັດ Pulse, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. ຂໍ້ມູນສະເພາະຂອງຜະລິດຕະພັນ
Handwheel working power supply voltage DC24V/1A
Receiver power supply voltage DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10ມ
Receiver end cable length 1ມ
Receiver end network cable length 3ມ
Operating temperature -25℃<ສະຖາວັນ<55℃
Anti-fall height 1ມ
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.ຄໍາແນະນໍາກ່ຽວກັບການຜະລິດຕະພັນສິນຄ້າ

ຫມາຍເຫດ:
Emergency stop button:
ກົດປຸ່ມຢຸດສຸກເສີນ, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, ສຸກເສີນຢຸດ io oo oo oo oo ຂອງຜູ້ຮັບໄດ້ຖືກປິດ, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 ປຸ່ມປະເພນີ, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
ກົດປຸ່ມແລະກົດປຸ່ມ Enable, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Product accessory diagram

6. ຄູ່ມືການຕິດຕັ້ງຜະລິດຕະພັນ
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 ຂະຫນາດການຕິດຕັ້ງຮັບ

6.3 Installation dimensions of aviation plugs

6.4 ແຜນວາດສາຍໄຟສາຍ
7.ຄໍາແນະນໍາກ່ຽວກັບການປະຕິບັດງານຜະລິດຕະພັນ

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. ເລືອກ Magnification: Switch the magnification switch and select the magnification level you need.
7. ການເຄື່ອນຍ້າຍແກນ: ກົດປຸ່ມແລະກົດປຸ່ມ Enable, ເລືອກປ່ຽນການຄັດເລືອກ Axis, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. ກົດປຸ່ມຢຸດສຸກເສີນ, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.ລາຍລະອຽດຂອງຜະລິດຕະພັນ

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : ເປັນຕົວແທນຈໍານວນຂອງການຄັດເລືອກການຄັດເລືອກ switches, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Maintenance
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. ກະລຸນາຫລີກລ້ຽງການບີບຕົວ, ການຕົກຕໍ່າ, ຕໍາແພ, ປົງຄາຍ. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. ຖ້າບໍ່ໃຊ້ເປັນເວລາດົນນານ, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. ຂໍ້ມູນຄວາມປອດໄພ

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. ຖ້າຕ້ອງການສ້ອມແປງ, ກະລຸນາຕິດຕໍ່ຜູ້ຜະລິດ. ຖ້າຄວາມເສຍຫາຍແມ່ນເກີດມາຈາກການສ້ອມແປງຕົວເອງ, ຜູ້ຜະລິດຈະບໍ່ໃຫ້ການຮັບປະກັນ

 

]]> ການເຄື່ອນຍ້າຍແບບໄຮ້ສາຍທີ່ຫ່າງໄກສອກຫຼີກສໍາລັບ CNC ຕັ້ງແນວຕັ້ງຄໍາແນະນໍາໃນການດໍາເນີນງານ https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.ການແນະນໍາກ່ຽວກັບຜະລິດຕະພັນ

The dedicated wireless remote contro for CNC vertical lathes is used for manual guidance, ການຈັດຕໍາແຫນ່ງ, tool setting, and other operations on CNC vertical machine tools. ຜະລິດຕະພັນນີ້ຮັບຮອງເອົາເຕັກໂນໂລຢີການສົ່ງແບບໄຮ້ສາຍ, eliminating the need for traditional spring wirae connections, ການຫຼຸດຜ່ອນຄວາມລົ້ມເຫຼວຂອງອຸປະກອນທີ່ເກີດຈາກສາຍໄຟ, and eliminating the disadvantages of cable dragging and oil stains, making operation more convenient. It is widely applicable to various vertical lathes such as CNC vertical lathes, single-column vertical lathes, and double-column vertical lathes.It can also be adapted to a variety of CNC systems on the market, ເຊັ່ນ: siemens,
Mitsubishi, fanuc, and Syntec.

2. Product functional features

1. Adopting 433 MHz wireless communication technology, with a wireless operating distance of 40 meters.
2.Adopting automatic frequency hopping function and using 32 sets of wireless remote controllers simultaneously, without affecting each other.
3. ສະຫນັບສະຫນູນປຸ່ມຢຸດສຸກເສີນ, switch IO signal output.
4. ອະນຸຍາດ 2 ປຸ່ມທີ່ສາມາດປັບແຕ່ງໄດ້, with switch-type IO signal output.
5. ອະນຸຍາດ -2 axis control.
6. Supports 3-level magnification control.
7. Support the enable button function, which can output on/off IO signals and control axis selection, multiplying factor, ແລະເຂົ້າລະຫັດ.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Supports pulse encoder, with a specification of 100 pulses per revolution.
3. ຂໍ້ມູນສະເພາະຂອງຜະລິດຕະພັນ
Operating voltage and current of wireless remote
3V/14MA
Battery specifications 2 AA alkaline batteries, size 5
Low voltage alarm range of wireless remote < 2.3V
Receiver power supply voltage DC5V-24V/A
Receiver emergency stop output load range AC125V-1A/DC30V-2A
Receiver enable output load range
AC125V-1A/DC30V-2A
Receiver custom button output load range DC24V/50mA
Receiver axis selection output load range DC24V/50mA
Receiver magnification output load range DC24V/50mA
Transmission power of handheld terminal
15dBm
Receiver receiving sensitivity -100dBm
Wireless communication frequency 433MHz frequency band
Wireless communication distance Barrier free distance of 40 ປະມານ
Operation temperature -25℃ < ສະຖາວັນ < 55℃
Anti fall height 1 (ແມັດ)
Custom button quantity 2
4. Product Function Introduction



ບັນທຶກ:

① Pulse encoder:
ກົດປຸ່ມແລະກົດປຸ່ມ Enable, shake the pulse encoder, emit a pulse signal,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: ແສງແຮງກະແສໄຟຟ້າແຮງດັນຕ່ໍາ, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
ກົດປຸ່ມຢຸດສຸກເສີນ, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (ສະຫຼັບພະລັງງານ):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Product accessory diagram

6. ຄູ່ມືການຕິດຕັ້ງຜະລິດຕະພັນ
6.1 Product installation steps

1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the equipment to the receiver via cables.
3.After the receiver is properly fixed, ເສົາອາກາດທີ່ມີໃຫ້ກັບຜູ້ຮັບຕ້ອງໄດ້ເຊື່ອມຕໍ່, and the outer end of the antenna should be installed or placed outside the electrical cabinet. ມັນໄດ້ຖືກແນະນໍາໃຫ້ວາງມັນຢູ່ເທິງສຸດຂອງຕູ້ໄຟຟ້າສໍາລັບຜົນກະທົບທີ່ດີທີ່ສຸດ. It is prohibited to leave the antenna unconnected or place it inside the electrical cabinet, as this may result in the signal being unusable.
4. ທີ່ສຸດ, turn on the power switch of the handwheel, and you can operate the machine remotely using the handwheel.

6.2 ຂະຫນາດການຕິດຕັ້ງຮັບ

6.3 ແຜນວາດສາຍໄຟສາຍ

7. Product operation instructions
1. Power on the machine and the receiver. The receiver’s working indicator light flashes. Install the battery in the wireless electronic handwheel, secure the battery cover, ແລະ
turn on the power switch of the wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. ເລືອກ Axis ປະສານງານ: ກົດປຸ່ມແລະກົດປຸ່ມ Enable, toggle the axis selection switch, and select the axis you want to operate.
3. ເລືອກ Magnification: ກົດປຸ່ມແລະກົດປຸ່ມ Enable, toggle the magnification switch,and select the desired magnification level.
4. ການເຄື່ອນຍ້າຍແກນ: ກົດປຸ່ມແລະກົດປຸ່ມ Enable, ເລືອກປ່ຽນການຄັດເລືອກ Axis, select the magnification switch, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. ກົດປຸ່ມແລະກົດປຸ່ມ Custom ໃດໆ, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. ກົດປຸ່ມຢຸດສຸກເສີນ, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled,release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
7. ຖ້າຫາກວ່າ handwheel ບໍ່ໄດ້ດໍາເນີນງານສໍາລັບໄລຍະເວລາໃດຫນຶ່ງ, it will automatically enter sleep mode to reduce power consumption. ເມື່ອມັນຖືກນໍາໃຊ້ອີກຄັ້ງ, the handwheel can be activated by pressing the enable button.
8. ຖ້າຫາກວ່າ handwheel ບໍ່ໄດ້ຖືກໃຊ້ເປັນເວລາດົນນານ, it is recommended to switch the handwheel shaft to the OFF position, ປິດພະລັງງານ handwheel, and extend the battery life.

8. ລາຍລະອຽດຂອງຜະລິດຕະພັນ

① :ZTWGP represents the appearance style
②：ຕົວກໍານົດການຜະລິດກໍາມະຈອນ:
01: Indicates that the pulse output signal is A, B; ແຮງດັນກໍາຈັດກໍາມະຈອນ 5V; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; ແຮງດັນກໍາຈັດກໍາມະຈອນ 5V; pulse quantity 100PPR.
04：ສະແດງເຖິງການຜະລິດວົງຈອນ NPN ທີ່ມີລະດັບຕໍ່າ, ກັບສັນຍານຜົນຜະລິດກໍາມະຈອນຂອງ A ແລະ B;The number of pulses is 100PPR.
05：ສະແດງໃຫ້ເຫັນຜົນຜະລິດແຫຼ່ງ PNP ໃນລະດັບສູງ, ກັບສັນຍານຜົນຜະລິດກໍາມະຈອນຂອງ A ແລະ B; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 ເປັນຕົວແທນ 2 axes.
④：Represents the type of axis selection switch signal, A ສະແດງເຖິງສັນຍານຜົນຜະລິດທີ່ກໍານົດໄວ້ໃນຈຸດ, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, A ສະແດງເຖິງສັນຍານຜົນຜະລິດທີ່ກໍານົດໄວ້ໃນຈຸດ, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 ເປັນຕົວແທນ 2 custom buttons.
⑦：Represents the power supply for the system handwheel, ແລະ 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

10. Product maintenance

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. ກະລຸນາຫລີກລ້ຽງການບີບຕົວ, ການຕົກຕໍ່າ, ຕໍາແພ, ປົງຄາຍ. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. ຖ້າບໍ່ໃຊ້ເປັນເວລາດົນນານ, ກະລຸນາເກັບມ້ຽນ handwheel ໃນສະຖານທີ່ທີ່ສະອາດແລະປອດໄພ. ໃນລະຫວ່າງການເກັບຮັກສາແລະການຂົນສົ່ງ, attention should be paid to moisture and shock resistance.

11. ຂໍ້ມູນຄວາມປອດໄພ

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. ຖ້າຕ້ອງການສ້ອມແປງ, ກະລຸນາຕິດຕໍ່ຜູ້ຜະລິດ. ຖ້າຄວາມເສຍຫາຍແມ່ນເກີດມາຈາກການສ້ອມແປງຕົວເອງ, ຜູ້ຜະລິດຈະບໍ່ໃຫ້ການຮັບປະກັນ

]]> handwheel ເອເລັກໂຕຣນິກທີ່ອຸທິດຕົນ Fanuc https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 ເດືອນພຶດສະພາ 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.ການແນະນໍາກ່ຽວກັບຜະລິດຕະພັນ

ມືຖືແບບເອເລັກໂຕຣນິກແບບໄຮ້ສາຍແມ່ນໃຊ້ສໍາລັບການນໍາພາໂດຍໃຊ້ຈ່າຍ, ການຈັດຕໍາແຫນ່ງ, ການຈັດລຽນເຄື່ອງມື,ແລະການປະຕິບັດງານອື່ນໆກ່ຽວກັບເຄື່ອງມືເຄື່ອງຈັກຊີເອັນຊີ. ຜະລິດຕະພັນນີ້ຮັບຮອງເອົາເຕັກໂນໂລຢີການສົ່ງແບບໄຮ້ສາຍ, ການລົບລ້າງການເຊື່ອມຕໍ່ສາຍໃນພາກຮຽນ spring ແບບດັ້ງເດີມ, ການຫຼຸດຜ່ອນຄວາມລົ້ມເຫຼວຂອງອຸປະກອນທີ່ເກີດຈາກສາຍໄຟ, ການລົບລ້າງຂໍ້ເສຍປຽບຂອງການລາກຂອງສາຍໄຟແລະນ້ໍາມັນ, ແລະການເຮັດໃຫ້ການເຮັດວຽກມີຄວາມສະດວກກວ່າ. ຮູບແບບຂອງມືຖືແບບໄຮ້ສາຍແບບໄຮ້ສາຍນີ້ແມ່ນມືທີ່ອຸທິດຕົນສໍາລັບລະບົບ fanuc. ການປະສານງານລະບົບ fanuc ແມ່ນສະແດງຢູ່ໃນເວລາຈິງໃນຫນ້າຈໍ handwheel ຜ່ານໂປແກຼມເຊື່ອມຕໍ່ IO-link, ແລະການຄັດເລືອກ Axis,ຂະຫຍາຍ, ແລະປຸ່ມທີ່ມີການເຊື່ອມຕໍ່ໂດຍກົງກັບລະບົບຜ່ານໂປໂຕລັອກ IO, reducing wiring.

2. ຄຸນນະສົມບັດຜະລິດຕະພັນ
1. ຮັບຮອງເອົາເຕັກໂນໂລຢີການສື່ສານໄຮ້ສາຍ 43MHZ, ໄລຍະທາງການປະຕິບັດງານໄຮ້ສາຍແມ່ນ 40 ປະມານ;
2. ຮັບຮອງເອົາຟັງຊັນຄວາມຖີ່ຂອງອັດຕະໂນມັດ, ໃຊ້ 32 ຊຸດຂອງຜູ້ຄວບຄຸມໄລຍະໄກແບບໄຮ້ສາຍໃນເວລາດຽວກັນໂດຍບໍ່ມີຜົນກະທົບຕໍ່ກັນແລະກັນ;
3. ສະຫນັບສະຫນູນປຸ່ມຢຸດສຸກເສີນ, ປ່ຽນສັນຍາ IO IUTER, ເຊື່ອມຕໍ່ກັບລະບົບຜ່ານສາຍໄຟ IO;
4. ບູຊາ 4 ປຸ່ມປະເພນີ, ປ່ຽນສັນຍານ IO, ສັນຍານຜົນຜະລິດກັບລະບົບຜ່ານອະນຸສັນຍາເຊື່ອມໂຍງ IO-link;
5. ສະຫນັບສະຫນູນປຸ່ມການເຄື່ອນໄຫວດ່ວນ + ແລະປຸ່ມ -, ກົດແລະກົດປຸ່ມເພື່ອທົດແທນມືເພື່ອຍ້າຍເຄື່ອງ;
6. ຮອງຮັບການຄວບຄຸມ 6 ແກນ, ປ່ຽນສັນຍານ IO, ສັນຍານຜົນຜະລິດກັບລະບົບຜ່ານອະນຸສັນຍາເຊື່ອມໂຍງ IO-link;
7. ສະຫນັບສະຫນູນ 1 ເທົ່າ,10ສະຖາວັນ, 100ການຄວບຄຸມ X . ສະຫນັບສະຫນູນການປ່ຽນສັນຍານ L0 L0, ແລະຜົນໄດ້ຮັບທີ່ມີສັນຍານຕໍ່ລະບົບຜ່ານລະບົບຜ່ານ io-link Protocol;
8. ສະຫນັບສະຫນູນການເຮັດວຽກປຸ່ມ, ເຊື່ອມຕໍ່ກັບລະບົບຜ່ານສາຍໄຟ IO, ແລະການຄວບຄຸມການເຂົ້າລະຫັດ Enable ໃນເວລາດຽວກັນ;
9. ສະຫນັບສະຫນູນການເຂົ້າລະຫັດ Pulse, 100 ກໍາມະຈອນ / ວົງມົນ, ເຂົ້າເຖິງລະບົບ MPG Handwheel Interface ໂດຍການໃຊ້ສັນຍານ encomping abg;

3.ຂໍ້ມູນສະເພາະຂອງຜະລິດຕະພັນ

4.ຄຸນນະສົມບັດຜະລິດຕະພັນ

ບັນທຶກ:
ປຸ່ມ Stop Stop ①emearGeny:
ກົດປຸ່ມຢຸດສຸກເສີນ, ຜົນຜະລິດສຸກເສີນ 2 ຄັ້ງທີ່ມີລະດັບສຸກເສີນໃນຜູ້ຮັບແມ່ນຖືກຕັດຂາດ, ແລະຫນ້າທີ່ທັງຫມົດແມ່ນບໍ່ຖືກຕ້ອງ. ຫຼັງຈາກນັ້ນການຢຸດສຸກເສີນຖືກປ່ອຍອອກມາ, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

ສະແດງ asscreen:

ປຸ່ມ③Custom:
4 ປຸ່ມປະເພນີ, ປຸ່ມແຕ່ລະປຸ່ມເທົ່າກັບຈຸດຜົນຜະລິດ IO ໃສ່ຜູ້ຮັບ, ເຊື່ອມຕໍ່ກັບລະບົບຜ່ານ iolink. ໂດຍທົ່ວໄປ, the ~ button is set as a high-speed button.
ປ່ຽນແປງການຄັດເລືອກການຄັດເລືອກ:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcສົມຄວນ Button:
ກົດປຸ່ມທາງລັດ "+" ເພື່ອຍ້າຍເຄື່ອງຕໍ່ໄປ, ແລະກົດປຸ່ມຕັດສັ້ນ "-" ເພື່ອຍ້າຍເຄື່ອງທີ່ບໍ່ດີ. This can replace turning the hand wheel to move the machine.
ປຸ່ມ:
ກົດແລະຖືປຸ່ມເປີດໃຊ້ໃດໆທັງສອງດ້ານແລະສັ່ນຕົວລະຫັດກໍາມະຈອນເພື່ອໃຫ້ມີປະສິດຕິຜົນ. ແລະທັງສອງກຸ່ມຂອງ enable enable ເປີດໃຊ້ IO ກ່ຽວກັບຜູ້ຮັບແມ່ນຖືກເປີດ. Release the enable button and the enable IO output is disconnected.
⑦ratioປ່ຽນ:
Switching the magnification switch can switch the magnification of handwheel control.
⑧teulse Encoder:
ກົດປຸ່ມແລະກົດປຸ່ມ Enable ແລະສັ່ນຕົວລະຫັດກໍາມະຈອນເພື່ອສົ່ງອອກກໍາມະຈອນ
signal to control the movement of the machine axis.
ສະຫຼັບ⑨power:
Handwheel power button.

5.ແຜນວາດອຸປະກອນເສີມ

6.ຄູ່ມືການຕິດຕັ້ງຜະລິດຕະພັນ

6.1 ຂັ້ນຕອນການຕິດຕັ້ງຜະລິດຕະພັນ

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.ອ້າງເຖິງແຜນວາດສາຍໄຟຂອງພວກເຮົາ, ສົມທຽບມັນກັບອຸປະກອນທີ່ຢູ່ໃນສະຖານທີ່ຂອງທ່ານ, ແລະເຊື່ອມຕໍ່
the equipment to the receiver via cables.
3. ຫຼັງຈາກຜູ້ຮັບໄດ້ຖືກແກ້ໄຂແລ້ວ, ເສົາອາກາດທີ່ມີໃຫ້ກັບຜູ້ຮັບຕ້ອງໄດ້ເຊື່ອມຕໍ່,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
ມັນໄດ້ຖືກແນະນໍາໃຫ້ວາງມັນຢູ່ເທິງສຸດຂອງຕູ້ໄຟຟ້າສໍາລັບຜົນກະທົບທີ່ດີທີ່ສຸດ. ມັນ
ຖືກຫ້າມບໍ່ໃຫ້ອອກຈາກເສົາອາກາດທີ່ບໍ່ມີສາຍພົວພັນຫຼືວາງເສົາອາກາດພາຍໃນຕູ້ໄຟຟ້າ,
which may cause the signal to be unusable.
4.ທີ່ສຸດ, ເປີດເຄື່ອງຈັກປ່ຽນໄຟຟ້າມືແລະທ່ານສາມາດປະຕິບັດງານໄດ້ໂດຍ
handwheel remote control.

6.2 ຂະຫນາດການຕິດຕັ້ງຮັບ

6.3 ແຜນວາດສາຍໄຟສາຍ

7. ການບໍາລຸງຮັກສາແລະການດູແລ

1. ກະລຸນາໃຊ້ມັນໃນສະພາບແວດລ້ອມແຫ້ງທີ່ມີອຸນຫະພູມແລະຄວາມກົດດັນປົກກະຕິເພື່ອຂະຫຍາຍ
ຊີວິດການບໍລິການ;
2. ກະລຸນາຫລີກລ້ຽງການໃຊ້ມັນໃນສະພາບແວດລ້ອມທີ່ຜິດປົກກະຕິເຊັ່ນ: ຝົນແລະຟອງນ້ໍາທີ່ຈະຂະຫຍາຍອອກ
ຊີວິດການບໍລິການ;
3. ກະລຸນາຮັກສາຮູບລັກສະນະຂອງ handwheel ສະອາດເພື່ອຂະຫຍາຍຊີວິດການບໍລິການ;
4. ກະລຸນາຫລີກລ້ຽງການບີບຕົວ, ການຕົກຕໍ່າ, ຕໍາແພ, ປົງຄາຍ. ເພື່ອປ້ອງກັນຄວາມເສຍຫາຍຂອງພາກສ່ວນທີ່ຊັດເຈນ
ພາຍໃນ handwheel ຫຼືເຮັດໃຫ້ເກີດຄວາມຜິດພາດທີ່ຊັດເຈນ;
5. ຖ້າບໍ່ໃຊ້ເປັນເວລາດົນນານ, ກະລຸນາເກັບມ້ຽນ handwheel ໃນສະຖານທີ່ທີ່ສະອາດແລະປອດໄພ;
6. Pay attention to moisture and shock during storage and transportation.

8. ຂໍ້ມູນຄວາມປອດໄພ

1. ກະລຸນາອ່ານຄໍາແນະນໍາຢ່າງລະມັດລະວັງກ່ອນທີ່ຈະໃຊ້. ຜູ້ຊ່ຽວຊານທີ່ບໍ່ແມ່ນຜູ້ຊ່ຽວຊານແມ່ນຖືກຫ້າມຈາກ
operating.
2. ກະລຸນາປ່ຽນຫມໍ້ໄຟໃນເວລາທີ່ແບັດເຕີຣີຕ່ໍາເກີນໄປເພື່ອຫລີກລ້ຽງຄວາມຜິດພາດທີ່ເກີດຈາກ
insufficient power causing the handwheel to be unable to operate.
3. ຖ້າຕ້ອງການສ້ອມແປງ, ກະລຸນາຕິດຕໍ່ຜູ້ຜະລິດ. ຖ້າຄວາມເສຍຫາຍແມ່ນເກີດມາຈາກການສ້ອມແປງຕົນເອງ,
the manufacturer will not provide warranty.

]]> Siemens ອຸທິດຕົນທີ່ບໍ່ມີສາຍໄຟຟ້າແບບ Electronic XWGP-ETS https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 ເດືອນພຶດສະພາ 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Introduction of remote control

a.Product Composition
Siemens real-time coordinate display wireless electronic handwheel consists of two parts: electronic handwheel + receiver;

b.Characteristics

*ສະຫນັບສະຫນູນ Plc Siemens PLC: S7-200 / -300 / -1200；ສະຫນັບສະຫນູນການສະແດງທີ່ໃຊ້ເວລາຈິງຂອງລະບົບ Siemens System ປະສານງານ；
*ໄລຍະທາງລະບົບສາຍດ່ວນເປີດ 40 ປະມານ, automatic frequency hopping technology, can use 32 sets of equipment at the same time;
*The electronic handwheel is powered by 2 AA batteries and can be used for more than 30 ມື້;
*The receiver is equipped with an external antenna to enhance the signal and is easy to install;
*Electronic handwheel support: ຕົວເຂົ້າລະຫັດຫນຶ່ງ 100 ຫນ່ວຍ 、ເຄື່ອງປ່ຽນຫນຶ່ງ Axis Axis ຫນຶ່ງຫນ່ວຍ 、 ເຄື່ອງເຈາະຂະຫນາດ 3 ຄວາມໄວ;
*Electronic handwheel supports 6 ປຸ່ມປະເພນີ, corresponding to Siemens PLC address, ເຊິ່ງສາມາດໄດ້ຮັບການດໍາເນີນການໂດຍບໍ່ເສຍຄ່າ;

*6 ປຸ່ມລູກຄ້າສາມາດຄວບຄຸມໄດ້ 6 ປ່ຽນຜົນໄດ້ຮັບ;
*The display screen displays the PLC corresponding register coordinate value in real time, and supports 6-axis display of real-time coordinates.

2.Application field

Programmable CNC remote control is widely used in various CNC fields such as laser engraving system, ເຄື່ອງໂມ້ຊີເອັນຊີ, ສູນ CNC Machining, gantry machine tool, ແລະອື່ນໆ

3. Introduction to the working principle

1）Electronic handwheel is connected to PLC via Ethernet receiver

a.The handwheel transmits the key data wirelessly to the receiver, and the receiver writes the keys through the network cable PLC system DB area; the receiver reads the data to be displayed from the designated DB area, and then returns the data to the handwheel display screen. The user can customize the base address of reading and writing DB area on the handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. The receiver supports Siemens S7 protocol. Applies to PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

In the server mode, the user configures the PLC read and write address through the WGP-ETS configuration software;Use the PLC connection configuration tool to configure the receiver into client mode. After configuration, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Specific application

Specific application of handwheel receiver and Siemens PLC S7-200:

a. The button on the handwheel corresponds to the value of the BOOL area set by the user in the PLC. If the button of the handwheel is pressed, the corresponding BOOL area is true, and when it is released, it is false, and the base address of the BOOL area can be set through the handwheel;

b. The handwheel can read the value of the DB area in the PLC. One axis has 4 bytes of display data, ແລະ 6 axes have a total of 24 bytes. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Appearance introduction

5.Receiver terminal definition and coding table

6.Appearance size

 

 

]]>