The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Endri-javatra miasa ny vokatra

1. Adopting 433MHz wireless communication technology, miaraka amin'ny halaviran'ny tsy misy tariby 100 meters.
2. Adopt automatic frequency hopping function and use 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhongchen, Invt, SY . For brands
that are not compatible, please contact us for customization.
4. Fanohanana ny hafainganam-pandeha, HERINANDRON'NY, and current reading of large motor frequency converters.
5. Fanohanana ny ankavia sy ny lalana havanana amin'ny alàlan'ny fanavaozana ny hafainganam-pandeha, HERINANDRON'NY, anoloana, indray, left and right control.
6. Fanitsiana ny fanitsiana ny tsipika fiovam-po ankavia sy havanana amin'ny alàlan'ny fiovam-po matetika
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Famaritana momba ny vokatra

4. Fampidirana ny vokatra fampidirana

-tsoratra:
Fampisehoana ①screen:

②Mode switch:

③Enable:
Bokotra mitambatra, Ny fandidiana sasany dia mitaky ny hanakana ny bokotra ahafahana miasa,see the instructions for each switch for details.
④Large motor switch:
Mampiasa switch 3-hafainganam-pandeha, Ny fisintonana ity kofehy ity dia afaka mifehy ny fandrosoana sy ny fihodinan'ny motera lehibe. Aorian'ny famoahana azy, Hitoetra ny fanjakana, Ary hisy fampisehoana mifanandrify eo amin'ny efijery. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤small môtô form for forward / mifamadika:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Mampiasa knb multi multi, press the enable button, turn the knob right, and display the straight line correction: DF: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 unit; Mihodina miankavia, fampisehoana tsipika mahitsy tsipika: DF: On the right, every turn of the knob increases by 1 unit, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Mampiasa switch 3-hafainganam-pandeha, Rehefa miasa ara-dalàna, Ny môtô kely dia azo fehezina mba hivadika miankavia na havanana. Indray mandeha namoaka, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ Fitsipiky ny hafainganam-pandeha lehibe:
Mampiasa knb multi multi, rotating 1 grid isaky ny mandeha, Ny sandan'ny hafainganam-pandehan'ny fiara fitaterana lehibe 0.2 vondrona. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Mampiasa knb multi multi, Amin'ny fomba manual, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 vondrona, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 vondrona. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. Kianjanika vokatra

6. Guide fametrahana vokatra
6.1 Dingana fametrahana vokatra
1. Apetaho ao anaty kabinetra elektrika amin'ny alàlan'ny buckle ao aoriana, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Jereo ny sary an-tsokosoko mpizara ary ampitahao amin'ny fitaovana an-toerana. Connect the equipment to the receiver through wires.
3. After fixing the receiver, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. Dia natokana hametraka izany eo an-tampon'ny kabinetra elektrika ho an'ny vokatra tsara indrindra. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Farany, install the battery on the remote control, Hamafiso ny fonon'ny bateria, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Famaranana fametrahana refesina

6.3 Kisary referengar

7. Torolàlana momba ny asa
7.1 Fanaraha-maso ny fanaraha-maso lavitra
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, amboary ny hafainganam-pandehan'ny motera kely mankany 25 on both sides, na 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 fotoana;
Ampiasao ny “Ny fifehezana ny hafainganam-pandeha maoderina” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, Avereno mankany amin'ny farany ny pejy,select “Save” to exit, and press the enable button to exit the menu;
Toy izao manaraka izao ny tarehimarika:
Ny tena ambony indrindra: feedback range of large motor current, set range 15-200A, toerana misy anao 100;
Fehezan-dalàna fifehezana hafainganam-pandeha: Modely mandeha ho azy, small motor automatically accelerates faster or slower,ny kely kokoa ny haingana kokoa, set range 200-1500, toerana misy anao 800;
Fehezan-dalàna fametahana: Set the upper limit that allows the motor speed to change. Rehefa miova izao ny vidiny ankehitriny, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, with a range of 05-12 and a default of 06;
Acceleration A1: The larger the motor speed, the faster it increases, with a range of 00-06 and a default of 01;
Seceleration A2: The larger the motor speed, the faster it decreases, with a range of 00-06 and a default of 02;
Mamela ny fifehezana hafainganam-pandeha: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Atombohy ny fihenam-bidy: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Mandeha ambony indrindra: maximum speed of left and right motors, isan-karazany 10-100, toerana misy anao 50;
Manapaka ny ankehitriny: maximum cutting current, displayed on the screen as IC value, isan-karazany 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Fetran'ny hafainganam-pandeha: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Modely mandeha ho azy: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 ny 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Host-Hostur: maximum speed of the large motor, isan-karazany 10-100, toerana misy anao 50;
Mbus equipment (maintsy): Selection of large motor frequency converter model, isan-karazany 00-03, toerana misy anao 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon)
Fitaovana sbus (maintsy): Safidy kely môtô converer converter modely, isan-karazany 00-05, toerana misy anao 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon)

04-Anchuanda 05-Tsia

7.2 Fametahana parameter amin'ny converterrequency
1. Safidy loharano: Channation Command Community
2. Ny fisafidianana loharanom-baovao matetika: fifandraisana omena
3. Baud rate: 19200
4. Data format: Tsy misy fanamarinana, Data format<8-N-1>
5. Adiresy eo an-toerana: Apetraho ny fiovam-po ankavia 1, ny tsy fivadihana mety 2, SY
the large motor frequency converter to 3
7.3 Torolàlana fanaraha-maso lavitra
1. Hery amin'ny milina, Mihodina ny fanaraha-maso lavitra, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (Halaviro ity dingana ity raha efa nametraka azy ny mpanamboatra milina);
2. Apetraho ny marika amin'ny converter matetika (skip this step if the machine manufacturer
has already set it);
3. Apetraho amin'ny fomba fiasa lavitra ny fanaraha-maso lavitra, and then use the remote control to move the machine to
the working position;
4. Amin'ny fomba manual, set the cutting current of the large motor to IC and the speed of the large motor
5. Mihodiha amin'ny fomba mandeha ho azy ary apetraho ny sandan'ny hafainganam-pandeha ho an'ny motera kely;
6. Amin'ny fomba mandeha ho azy, ampodio ny kodiarana lehibe handroso mba hanombohana ny motera lehibe, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Famahana ny vokatra vokatra

9.fikarakarana
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Raha tsy ampiasaina mandritra ny fotoana maharitra, please remove the battery and store the remote control and battery in a clean
and safe place.
6.Mandritra ny fitahirizana sy ny fitaterana, attention should be paid to moisture and shock resistance.

10. Fampahalalana momba ny fiarovana
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. Raha ilaina ny fanamboarana, Azafady mba mifandraisa amin'ny mpanamboatra. Raha ny fahasimbana dia vokatry ny fanamboarana tena, the manufacturer
will not provide warranty.

MODELY: DH01R-4W-26K

Fitaovana azo ampiharina:various industrial equipment

2.Ny sary miditra amin'ny vokatra

Fanamarihana: Azonao atao ny misafidy ny iray amin'ireo Antena telo. The suction cup antenna is standard by default.

3.Product model description

Fanamarihana:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 ny 2, indicating that there are 1 ny 2 Inp inputs(maximum 2 fantsona); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, etc.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Toetoetra

1）Maximum 26 Famonoana entana;
2）Maximum 4 Fantsona ny Analog 0-10V (Azo atao ny manamboatra ny sakana): fanohanana 2 Fantsona ny fanitarana ny famoahana potalistiometer nomerika;
3）2 analog inputs; ary aseho amin'ny fanaraha-maso lavitra, Ny sakana fampisehoana dia azo amboarina
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Aa bateria, low power consumption design;
6） Wireless operation distance is 200 metatra;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.Famaritana Switch Switch

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

Voltage ambany: Ny bateria fanaraha-maso lavitra dia ambany loatra, please replace the battery.

Nilatsaka ny tambajotra: Ny famantarana an-tariby dia tapaka. Azafady mba jereo ny herin'ilay mpandray, herim-po indray, and restart the remote control.

7.Fanaraha-maso ny fanaraha-maso lavitra

1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, mihodina ny switch herinaratra, and the display shows a value,manondro fanombohana mahomby. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Ny sasany miasa amin'ny fanaraha-maso lavitra dia azo amboarina amin'ny alàlan'ny tarehimarika. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Mivoaha ny menio Parameter: Misafidiana ny hamonjy na tsy hitahiry, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 ny 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 ny 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 ny 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;

8.Toetr-toetra elektrika fanaraha-maso lavitra

9.Ny haben'ny fanaraha-maso lavitra

The final interpretation right of this product belongs only to our company.

MODELY: DH12S-P6S

Fitaovana azo ampiharina:wire saw/blade saw machine

2.Ny sary miditra amin'ny vokatra

Fanamarihana: Azonao atao ny misafidy ny iray amin'ireo Antena telo. The suction cup antenna is standard by default.

3.Famaritana Switch Switch

4.Fampidirana fampisehoana

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(Parameter azo zahana)
Automatic cutting main motor setting current: Setting: 28 (Parameter azo zahana)
Swing arm motor speed: Swing: 0-50

Voltage ambany: Ny bateria fanaraha-maso lavitra dia ambany loatra, please replace the battery.

Nilatsaka ny tambajotra: Ny famantarana an-tariby dia tapaka. Azafady mba jereo ny herin'ilay mpandray, herim-po indray, and restart the remote control.

5.Fanaraha-maso ny fanaraha-maso lavitra

1）Turn on the remote control

When the receiver is powered on, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; install two AA batteries in the remote control, mihodina ny switch herinaratra, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, avadika ny “Mandroso / mifamadika” Mihodinkodina amin'ny handroso, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, avadika ny “Mandroso / mifamadika” mifamadika amin'ny mifamadika, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Hodio ny “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, avadika ny “Mandroso / mifamadika” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Avadika ny “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Tsindrio ary mitazona ny “speed adjustment enable” bokotra ary rotate ny “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “mandroso / mifamadika” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (Ireo mpampiasa dia voarara tsy hanova azy raha tsy nahazoana alàlana)

Enter the parameter menu:Amin'ny fomba manual, when the main motor speed is 0, manosika ny handroso / avereno miverina intelo isaky ny laharana, and then push it down three times in a row to enterthe parameter menu;
Mivoaha ny menio Parameter: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, toerana misy anao 800, unit milli second,Voarara ny fanovana;
Fehezan-dalàna fametahana: Rehefa mihoatra ny sandany ity lafo vidy ity, rapid deceleration begins, unit Ampere;
Acceleration A1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
Seceleration A2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, Voarara ny fanovana;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, Voarara ny fanovana;
Ny tena ambony indrindra: The range of main motor feedback current, unit Ampere;
Host-Hostur: Remote control main motor speed adjustment display range;
Mandeha ambony indrindra: Invalid parameter;
Fomba fanodinana hafainganam-pandeha: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Tapaka mandeha ho azy, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;unit: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Toetr-toetra elektrika fanaraha-maso lavitra

7.Ny haben'ny fanaraha-maso lavitra

The final interpretation right of this product belongs only to our company.

MODELY: Dh12s-ld

Fitaovana azo ampiharina:Wire Crawler Wire nahita milina

Ny sary miditra amin'ny vokatra

Fanamarihana: Azonao atao ny misafidy ny iray amin'ireo Antena telo. The suction cup antenna is standard by default.

Famaritana Switch Switch

Fampidirana fampisehoana

Ny hafainganam-pandeha lehibe：S1：0-50
Ny hafainganam-pandeha kely: S2: 0-50
DickspeedLimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Ny fanakorontanana mandeha ho azy: I C: 0-35 (Parameter azo zahana)
Sanda fanitsiana Linear: DF: -99-99 (1 ny unit dia eo amin'ny 0,02v)

Voltage ambany: Ny bateria fanaraha-maso lavitra dia ambany loatra, please replace the battery.

Nilatsaka ny tambajotra: Ny famantarana an-tariby dia tapaka. Azafady mba jereo ny herin'ilay mpandray, herim-po indray, and restart the remote control.

Fanaraha-maso ny fanaraha-maso lavitra

1.Mihodina ny fanaraha-maso lavitra

Rehefa mahery ny fahefana, Ny jiro RF-LED eo amin'ny mpandray dia manomboka amin'ny Flash;Mametraha bateria roa AA ao amin'ny famporisihana ny fanaraha-maso lavitra, mihodina ny switch herinaratra, ary ny fampisehoana dia hampiseho ny hafainganam-pandehan'ny moto, indicating successful startup.

2.Fitsipika moto sy hafainganam-pandeha

Avadika ny “mandroso / mifamadika” Mihodinkodina amin'ny handroso, Ny môtô maditra be dia be ny moto, Ary haseho ny fampisehoana

Avadika ny “mandroso / mifamadika” mifamadika amin'ny mifamadika, Ny môtô lehibe amin'ny mpandray dia mifamadika, ary ny fampisehoana dia hampiseho ny fiheverana

Hodio ny “Fanitsiana ny hafainganam-pandeha moto” Knob hanitsiana ny famoaham-bolan'ny haingam-pandeha amin'ny haingam-pandeha amin'ny haingam-pandeha;

3.Motor sy ny fifehezana hafainganam-pandeha

Afindra ny “mandroso / mifamadika” Mihodinkodina amin'ny handroso, Ny kodiarana havia sy ny kodiarana havanana dia avadika ny mpandray, ary ny fampisehoana dia manambara

Avadika ny “Mandroso / mifamadika” mifamadika amin'ny mifamadika, Ny kodiarana ankavia sy ny kodiarana havanana amin'ny mpandray dia avadika, ary ny fampisehoana dia mampiseho fiheverana

4.Mihodina miankavia sy miankavia

Avadika ny “Ankavia / havanana” Mihodina miankavia, Ny kodiaran'ny mpandray anjara dia handroso ary hivadika,Ary ny fampisehoana dia haseho ankavia

Avadika ny “Mihodina miankavia / havanana” Mihodina miankavanana, Ny kodiarana ankavia amin'ny mpandray dia handroso ary hivadika, ary ny fampisehoana dia haseho ankavanana

5.Mihodina amin'ny toerana

Amin'ny fomba manual:
Mihodina miankavia: Tsindrio ary mitazona ny “Tadiavo” button, avadika ny “Ankavia / havanana havanana” Mihodina miankavia, Ny kodiarana havia sy ny kodiarana havanana havanana dia avadika ny mpandray,ary manomboka miankavia miankavia;

Mihodina miankavanana: Tsindrio ary mitazona ny “Tadiavo” button, avadika ny “Ankavia / havanana havanana” Mihodinkodina amin'ny ankavanana, Ny kodiarana ankavia sy ny kodiarana havanana amin'ny mpandray dia avadika, ary ny mpandray dia manomboka mihodina eo amin'ny toerany;

6.Fanitsiana ny haingam-pandeha maotera maoderina

Amin'ny fomba mandeha ho azy: tsindrio ary mitazona ny “Tadiavo” bokotra ary rotate ny “Fanitsiana ny hafainganam-pandeha maoderina” Mba hanitsiana ny hafainganam-pandeha ambony indrindra amin'ny moto kely mandritra ny fanapahana mandeha ho azy;

7.Tapaka mandeha ho azy

Ny dingana voalohany dia ny manomboka ny moto lehibe; Ny dingana faharoa dia ny famadihana ny mode mode mankany “fiara”; Ny dingana fahatelo dia ny manomboka ny moto kely ary ny efijery dia hampiseho “Manapaka fiara”,manondro fa niditra tao amin'ny fomba fanodinana mandeha ho azy io;

8. Fanitsiana tsipika mahitsy

Rehefa mandroso sy mandroso ny mofomamy ankavia sy havanana, Ny hafainganam-pandeha ankavia sy havanana dia tsy mifanaraka, ary ny fandehanana an-tongotra mahitsy. Azonao atao ny mampiasa ny fiasa fanitsiana ny tsipika momba ny fanaraha-maso lavitra mba hanitsakitsahana ny hafainganam-pandeha sy ny kodiarana havia sy havanana;
Fitsipika fanitsiana: Amin'ny alàlan'ny asa fanitsiana, Ny hafainganam-pandehan'ny kodiarana havia dia tsara mba hahatratrarana ny hafainganam-pandeha mitovy amin'ny kodiarana mety, mba hampifanaraka ny hafainganam-pandehan'ny kodiarana havia sy havanana ary hanafoana ny fivoahana;
Fomba fanamboarana fanitsiana: Amin'ny fomba manual, tsindrio ary mitazona ny “Tadiavo” bokotra ary rotate ny “Ny fitsipiky ny hafainganam-pandeha maotera”;
Mihodina amin'ny famantaranandro mba hampitomboana ny volan'ny kodiarana ankavia ary ny sandan'ny fanitsiana eo amin'ny efijery fampisehoana dia hitombo;
Mihodina tsy mety amin'ny alàlan'ny fampihenana ny volan'ny hafainganam-pandehan'ny kodiarana havia sy ny sandam-panarenana ny fampisehoana;
Range fanitsiana: Sanda fanitsiana -90 ny 90; Ny volavolan-dalàna fanitsiana ny vondrona fanitsiana iray dia manodidina ny 0,02v;

9. Parameter Menu (Ireo mpampiasa dia voarara tsy hanova azy raha tsy nahazoana alàlana)

Ny sasany miasa amin'ny fanaraha-maso lavitra dia azo amboarina amin'ny alàlan'ny tarehimarika. Amin'ny fomba manual, Rehefa ny hafainganam-pandehan'ny motera kely S2 dia 10, manosika ny handroso / avereno miverina intelo isaky ny laharana, ary avy eo manosika azy intelo in-telo isaky ny laharana hiditra ny menio parameter;
Mivoaha ny menio Parameter: Misafidiana ny hamonjy na tsy hitahiry, Avy eo, tsindrio ny bokotra ahafahana manamarina ny fivoahana;
Ny tena ambony indrindra: Ny fandidiana ny voamadinika momba ny motera manapaka 80% amin'ity ankehitriny ity;
Fehezan-dalàna fifehezana hafainganam-pandeha: Ireo tarehimarika fanaraha-maso mandeha ho azy, toerana misy anao 800, Voarara ny fanovana;
Fehezan-dalàna fametahana: Parameter fanaraha-maso mandeha ho azy. Rehefa mihoatra ny sandany ity lafo vidy ity,deceleration begins.
Acceleration A1: Parameter fanaraha-maso mandeha ho azy, Rehefa ambany ny fanapahana dia ambany noho ny fanoratana ny set, Ny hafainganam-pandehan'ny haingam-pandeha;
Seceleration A2: Parameter fanaraha-maso mandeha ho azy, Rehefa avo kokoa noho ny napetraka ny fanapahana izao
Manapaka ny ankehitriny, Ny hafainganam-pandehan'ny fanodinana;
Famerenana antsy mandeha ho azy: Tsy mety;
Atombohy ny fihenam-bidy: 0, Tsy misy fihenam-bidy; 1, samirery. Tsindrio ny fanalahidy + forward and reverse to take effect and self-lock.
Mandeha ambony indrindra: the maximum speed of the small motor.
Manapaka ny ankehitriny: Apetraho ny tena ambony indrindra amin'ny motera lehibe ho an'ny fanakanana mandeha ho azy. Raha mihoatra ny sandany ny valiny ankehitriny, it will start to decelerate.
Fetran'ny hafainganam-pandeha: the default maximum speed of automatic cutting speed when turning on the machine.
Modely mandeha ho azy: 0, Ny kodiarana mandeha ho azy dia mifehy mandeha ho azy; 1, the automatic switch controls the automatic IO output point.
Fomba fanodinana hafainganam-pandeha: the maximum speed of the small motor during automatic cutting.
Host-Hostur: maximum speed of large motor.

Toetr-toetra elektrika fanaraha-maso lavitra

Ny haben'ny fanaraha-maso lavitra

The final interpretation right of this product belongs only to our company.