Description
1.Product model
Model: DH01R-4W-26K
Applicable equipment:various industrial equipment
2.Product accessories diagram
Fanamarihana: You can choose one of the three antennas. The suction cup antenna is standard by default.
3.Product model description
Fanamarihana:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.
②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.
④Analog input, ranging from 1 to 2, milaza fa misy 1 to 2 analog inputs(faratampony 2 fantsona); rehefa misy input analog, Tokony hojerena ny isan'ny voltase amin'ny fidirana analogue (ny resevera anay dia mandeha amin'ny 0 -5V, ny mpampiasa dia afaka manamarika ihany koa toy ny 4-20 mA na 0-10V, etc.) ary ny isan'ny fampisehoana mifanaraka amin'ny haben'ny analogue (ohatra: miseho 0-100 volts na 0-1000 amps)
Ireo habetsan'ny analoga roa ireo dia azo ampiasaina ho toy ny fampisehoana amin'ny lasantsy amin'izao fotoana izao sy ny lasantsy.
4.Toetoetra
1）Maximum 26 milina welding DH22;
2）Maximum 4 fantsona analogue 0-10V output (azo namboarina ny isan-karazany): fanohanana 2 fantsona famoahana potentiometer nomerika mitoka-monina lavitra;
3）2 analog inputs; ary aseho amin'ny fanaraha-maso lavitra, azo amboarina ny sehatra fampisehoana
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Batterie AA, famolavolana fanjifana herinaratra ambany;
6） Wireless operation distance is 200 metatra;
7）Protection grade IP67;
8）With cross switch operation, manohana 4-direction cross switches roa;
9）Back strap design.
5.Famaritana ny switch remote
6.Asehoy ny fampidirana votoaty
Ny sandan'ny W1 knob: W1: 0-1000 (Parameter azo amboarina 0-9999)
W2 knob value: W2: 0-5000 (Parameter azo amboarina 0-9999)
W3 knob value: W3: 0-5000 (Parameter azo amboarina 0-9999)
W4 knob value: W4: 0-5000 (Parameter azo amboarina 0-9999)
ADC1 feedback display: 0-1000 (Parameter azo amboarina 0-5000)
ADC2 feedback display: 0-1000 (Parameter azo amboarina 0-5000)
Low voltage: The remote control battery is too low, please replace the battery.
Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.
7.Remote control function operation instructions
1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A sy K9-B fanalahidin'ny pejy amin'ny alàlan'ny menio ary mifidiana masontsivana; mihazona K1-A, ary tsindrio avy eo ny bokotra K9-A/B hanova ny masontsivana;
Mialà amin'ny menu paramètre: misafidy ny hamonjy na tsia, ary tsindrio avy eo ny bokotra K1-A hanamarina ny fivoahana;
Ampahany F1W1: Ny sandan'ny famirapiratan'ny bokotra W1 eo amin'ny efijery fampisehoana, Adjustable avy amin'ny 0 to 9999;
Ampahany F2W2: Ny sandan'ny sanda aseho amin'ny bokotra W2 eo amin'ny efijery fampisehoana, Adjustable avy amin'ny 0 to 9999;
Ampahany F3W3: Ny sandan'ny sanda aseho amin'ny bokotra W3 eo amin'ny efijery fampisehoana, Adjustable avy amin'ny 0 to 9999;
Ampahany F4W4: The display range value of the W4 knob on the display screen, Adjustable avy amin'ny 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
8.Remote control electrical characteristics
9.Remote control size
The final interpretation right of this product belongs only to our company.
hevitra
Tsy mbola misy hevitra.