2. Nga waahanga Hua
1. Whakawhanake i te hangarau whakawhitiwhiti a 433MHZ, Te tawhiti o te mahi ahokore 100 meters.
2. Whakamahia te Mahi Aunoa Aunoa Aunoa, take 32 huinga o nga kaihoko ahokore ahokore i te wa ano, without affecting each other.
3. Tautokohia nga kaiwhakauru katoa me te kawa 485-modbus RNU. Ko nga waitohu Inverter kua whakauruhia ki roto:Shanghai xielin, Fuji, Moni hua, Zhongchen, Toro, Ānaanda. If the brand is not ada please contact us for customization.
4. Tautoko i te tiimata motuka motuka nui, Te Ture Tere, and current reading.
5. Tautoko i te ture maui me te tika ki te taha matau, tīmatanga, front and back left and right control.
6. Support left and right crawler inverter straight line correction to keep the machine moving in a straight line.
7. Ko te Taha Taputapu i kite i te mahi tapahi aunoa, automatically adjust the left and right crawler speed in real time according to the large motor current information.
8. I te wa ano, He hototahi ki te putanga o Io tika hei whakahaere i te tiimata me te aukati i te motuka, and analog voltage output to control the motor speed.

3. Whakatakotoranga Hua

4. He kupu whakataki hua

Pukapuka:
Whakaaturanga ①Screen:

Whakawhitiwhiti ②mode:
Ma te whakamahi i te huringa 2-taumata, Ka taea te huri i waenga i nga momo Aunoa me te Manuahi, and the corresponding mode will be displayed on the screen for switching.
③ Whakahohe:
Nga paatene whakakotahi, Ko etahi mahi e hiahia ana kia mau ki te paatene Whakahohe, please refer to the instructions for each switch for details.
 te huringa motuka nui:
Ma te whakamahi i te huringa 3-tere tere, Ko te kukume i tenei huringa ka taea te whakahaere i te hurihanga whakamua me te hurihuri o te motuka nui. I muri i te tuku i te reira, Ka noho tonu te kawanatanga, A ko reira nga whakaaturanga e whakaatu ana i te mata. Ko te pere T te tohu kua huri whakamuri, and the y arrow indicates reverse rotation.
⑤small motuka / hurihuri whakamuri:
Ma te whakamahi i te huringa-3-tere tere, Ko te kukume i tenei huringa ka taea te whakahaere i te motuka iti hei neke whakamua me te hoki whakamuri. Ko te whakaaturanga e tika ana ka whakaatu i te mata, with the t arrow indicating forward and the ↓ arrow indicating backward.
Ko te whakawhiti hiko:
The remote control display screen is turned on.
 te hurihuri motuka hurihuri:
Ma te whakamahi i te huringa 3-tere tere, Ka whakahaerehia ā-ringa, Ka taea te whakahaere i te motuka iti ki te huri ki te taha maui, ki te taha matau ranei. Kia tukuna ano, Ko te mana mamao ka aukati aunoa i tenei mahi.Katohia te whenua whakamua, Tahuri tenei huringa me te whakaaturanga whakaatu ka puta i te mata.The + Ko te pere e tohu ana i te taha maui, me te – Ko te pere e whakaatu ana i te taha matau.Ko te aratau whakamuri, Tahuri tenei huringa me te whakaaturanga whakaatu ka puta i te mata.The + Ko te pere e tohu ana i te taha maui, me te – Ko te pere e tohu ana i te wa tika.Press me te pupuri i te paatene Whakahohe, Na ka hurihia tenei huringa ki te mahi i te mahi hurihuri, making the turn faster.
 te ture tere motuka motuka:
Ma te whakamahi i te puranga tuururu maha, Hurihia te puku ki te whakatika i te tere tere o te motuka nui mo ia 1 Te hurihuri, te uara tere o nga huringa motuka nui e tata ana ki te tata 0.2 wae, and rapid rotation can quickly modify the speed value of the large motor.
9 Ture iti motuka motuka (Whakatikatika Raina):Hei whakamahi i te puranga o te kauri, I roto i te aratau ā-ringa, mo nga mea katoa 1 Tuhinga o mua, te uara tere o nga huringa motuka iti e tata ana ki te tata 0.1 wae. Fast rotation can quickly modify the speed value of the small motor.
I roto i te aratau aunoa, pēhi i te pātene Whakahohe ka huri 1 Whakapaihia ia wa. Te uara tere tere f o nga huringa iti o te motuka iti e tata ana 0.1 wae. Ka taea e te hurihanga tere te whakarereke i te uara tere tere o te motuka iti.Press te paatene, hurihia te puku ki te taha matau, Na ko te whakaaturanga tohu raina e whakaatu ana i te whakaatu D F: mauī. Ko ia hurihanga o te Knob ka piki ake 1 aronui; Tahuri te maui maui, Whakaaturanga Whakatika Tika: DF: tika. Ko ia hurihanga o te Knob ka piki ake 1 aronui, a ko ia waahanga whakatikatika e pa ana ki te motuka tere motuka a Avi fork of about 0.02 V.

5. Whakaahua Whakauru Hua

6. Aratohu Whakauru Hua
6.1 Tikanga whakaurunga Hua
1. Tāutahia te kaiwhiwhi i roto i te rūnanga hiko na roto i te peeke i te tuara o muri, or install it in the electrical cabinet through the screw holes at the four corners of the receiver.
2. Tirohia ki to maatau Kaipupuri Kaihoko, Whakatauritea o taputapu i runga i-papa, and connect the equipment to the receiver through wires.
3. I muri i te whakatau i te kaiwhiwhi, Ko te antena e rite ana ki te kaiwhiwhi me hono, me te mutunga o waho o te antena me whakauru, ka whakanohohia ki waho o te rūnanga hiko. E taunaki ana kia whakatakotoria ki runga i te tihi o te rūnanga hiko mo te paanga tohu pai. Ka rukuhia kia waiho te antena kaore i te whakakorehia, ka tuu ranei i te annanna i roto i te rūnanga hiko, which may cause poor signal and unusable.
4. Rawa, Tāutahia te pākahiko i te mana mamao, Whakanohia te taupoki pākahiko, katahi ka huri ki te huringa o te mana mamao. Whai muri i te whakaaturanga mana mamao e whakaatu ana i te atanga mahi noa, you can perform remote control operation.

6.2 Nga Taumata Whakauru

6.3 He hoahoa tohutoro a te kaiwhiwhi

7. Tohutohu Mahi Hua
7.1 Tautuhinga Raraunga Whakawhiti Mamao
Me pehea te whakauru i nga tohu papamuri o te kaiwhakahaere mamao: Tahuri te aratau aratau ki te aratau ā-ringa, whakatika i te tere o te motuka iti ki 25, rānei 0, 10, 20, 40, 50, ka hurihia te hurihuri whakamua o te motuka nui ki runga 3 nga wa me te heke iho 3 wā;
Whakamahia te “Te whakahaere tere motuka iti” Katoko ki te huri i te whaarangi, Whakahohe Whakahohe me te huri i te puku o te motuka motuka iti hei whakarereke i nga tohu; I muri i te whakarereke, Tahuri te whaarangi ki te mutunga, Tīpakohia Tiaki me te putanga, ka pēhi i te pātene Whakahohe kia puta te tahua;

Ko nga tohu e whai ake nei:Nui rawa atu: Te rahi o te motuka mo te motuka urupare a te motuka, Te Whakatau i te Rarangi 15-200A, hapanga 60;

Nga tohu hiko tere: Aratau Tauhokohoko Tauhokohoko Motuhake Tere Tere Tere, te iti ake te tere, Te whakanoho 200-1500, hapanga 1000;

Tohu tinihanga: Tautuhia te rohe o runga o te huringa tere o te motuka. I te wa e whakarereke ana i tenei wa o tenei uara, ka kokiri. Ko te iti ake, Ko te tere o te taha maui me te taha matau ka kohukohu. Ko te awhe ko te 05-12, Na ko te taunoa te 06;

Whakatere A1: Te nui ake o te uara, Ko te tere tere ka piki haere te motuka motuka, RANGE 00-06, taunoa 01; The A2: Te nui ake o te uara, Ko te tere tere ka heke te tere o te motuka, tuarā maunga 00-06, hapanga 02;

Whakahohea te Ture Tere: Ahakoa me whakahohea te ture tere motuka motuka iti, 00 e kore e whakahohea, 01 Ka whakahohea, hapanga 01;

Whakaoho ake-whaiaro: Ahakoa ko te motuka nui ka pupuri aunoa i te maukati i muri i te tuku me te hurihuri whakamuri ka tukuna, 00 e kore e puritia, 01 kei te mau tonu, hapanga 01;

Te haerenga nui: Te tere o te taha maui me te taha matau, tuarā maunga 10-100, hapanga 50;

Tapahi i naianei: Ko te tapahi iti rawa o naianei, Ka whakaatuhia e te mata te uara ic, tuarā maunga 15-160, hapanga 30, Ko te mata e whakaatu ana i te IC: 30. Ko te rohe o runga o tenei tohu = tino pai x 80%;

Te tau tere taunoa: Ko te huringa motuka iti te tapahi aunoa i te tiimata, tuarā maunga 00-100, hapanga 10, Ka whakaatu te mata i te F1.0, this parameter is only accurate when the maximum travel is set to 50.

Takiwā ahonoa: Ko te taunoa 10. A, no te kore e mau te tohu mana whakahaere, kei kona ano te pokanoa ki te papaanga, Ka taea e koe te whakarereke i tenei tohu ki te whakawhiti i nga kaarai kia kore ai e pokanoa;

Ko te rohe tere tere: Ko te rohe o runga o te tere tapahi aunoa o te motuka iti,tuarā maunga 00-200, hapanga 60, Ko nga whakaaturanga mata 6.0; Whakaatuhia te uara o runga = Tere Tere Tere × 0.1;

He nui te ope nui: Ko te tere o te motuka nui, tuarā maunga 10-100, hapanga 50;

Taputapu Mbus ( whakahauanga ): Te kowhiringa o nga tauira motuka motuka motuka, tuarā maunga 00-03, hapanga 03;

00- Shanghai xielin 01 Fuji
02- Toro 03 Innovance (zhongchen, Robicon)

Nga taputapu SBU (whakahauanga): Te kowhiringa mo te motuka motuka motuka iti, tuarā maunga 00-05, hapanga 03;
00- Shanghai xielin 01 Fuji
02- Toro 03 Innovance (zhongchen, Robicon)
04-Anchuanda 05-kaore

8. Nga Whakawhiwhinga Hua

7.2 Te tautuhi i te tautuhinga o te kaitahuri
1. Te kowhiringa o nga Rangahau: Haumaru Whakawhitiwhiti Whakawhitiwhiti
2. Te kowhiringa rauemi matua: Whakawhitiwhiti i hoatu
3. Te reinga baud: 19200
4. Hōputu raraunga: Kaore he whakaotinga, Hōputu raraunga<8-N-1>
5. Wāhitau ā-rohe: Whakaturia te kaitahuri maui ki te taha maui ki 1, Ko te kaitahuri tika ki te 2, and the large motor frequency converter to 3

7.3 Tohutohu Whakahaere Whakahaere Mamao
1. Te mana ki te miihini, Tahuri ki te mana mamao, Whakauruhia te papamuri mamao, Whakatakotoria nga tohu papamuri mamao, Ko te nuinga ko te whakatakoto i nga tauira o nga kaitahuri motuka iti me te rahi (Hūpeke tenei taahiraa ki te mea kua oti te hanga e te kaiwhakanao miihini);
2. Whakatauhia nga tohu o te kaitahuri o te waa (Hūpeke tenei taahiraa ki te mea kua oti kē te kaihanga miihini);
3. Whakatauhia te mana mamao ki te aratau ā-ringa, katahi ka whakamahi i te mana mamao ki te neke i te miihini ki te tūranga mahi;
4. I roto i te aratau ā-ringa, Whakatauhia te uara ic mo te tapahi i te motuka nui me te tere o te motuka nui;
5. Huri ki te aratau aunoa ka whakanoho i te taapiri tere tere f mo te motuka iti;
6. I roto i te aratau aunoa, Hurihia te huringa motuka nui ki te anga whakamua ki te timata i te motuka nui, katahi ka hurihia te huringa motuka iti ki te anga whakamua, ki te huri ranei. The remote control enters automatic cutting mode and begins cutting.

9.Whakatikatika
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Mena kaore i whakamahia mo te wa roa, please remove the battery and store the remote control and battery in a clean and safe place.
6.I te rokiroki me te waka, attention should be paid to moisture and shock resistance.

10. Nga korero mo te Haumaru
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Tena koa whakakapihia te pākahiko i te wa ka iti rawa te pākahiko ki te karo i nga hapa i puta mai i te kaha, which may result in the remote control being unable to operate.
3. Mena e hiahiatia ana te whakatikatika, Tena whakapā atu ki te kaiwhakanao. Mena he kino te kino na te whakatikatika i a ia ano, Kaore te kaiwhakanao e tuku raihana

The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Product functional features

1. Adopting 433MHz wireless communication technology, with a wireless operating distance of 100 meters.
2. Whakamahihia te mahi tere aunoa me te whakamahi 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai xielin, Fuji, Huichuan, Zhongchen, Toro, me . For brands
that are not compatible, please contact us for customization.
4. Tautokohia te ture tere tere, tīmatanga, and current reading of large motor frequency converters.
5. Tautoko maui me te huarahi tika te whakahaere i te wahanga tere tere, tīmatanga, mua, muri, left and right control.
6. Tautoko i te whakatikatika raina o te taha maui me te huarahi tika ki te pupuri i te miihini e haere ana i te
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Whakatakotoranga Hua

4. Product Function Introduction

Pukapuka:
Whakaaturanga ①Screen:

Whakawhitiwhiti ②mode:

③Enable:
Nga paatene whakakotahi, Ko etahi mahi e hiahia ana kia mau ki te paatene Whakahohe,see the instructions for each switch for details.
④Large motor switch:
Ma te whakamahi i te huringa 3-tere tere, Ko te kukume i tenei huringa ka taea te whakahaere i te hurihanga whakamua me te hurihuri o te motuka nui. I muri i te tuku i te reira, Ka noho tonu te kawanatanga, A ko reira nga whakaaturanga e whakaatu ana i te mata. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤small motuka / hurihuri whakamuri:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Ma te whakamahi i te puranga tuururu maha, press the enable button, turn the knob right, and display the straight line correction: DF: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 aronui; Tahuri te maui maui, Whakaaturanga Whakatika Tika: DF: On the right, every turn of the knob increases by 1 aronui, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Ma te whakamahi i te huringa 3-tere tere, Ka whakahaerehia ā-ringa, Ka taea te whakahaere i te motuka iti ki te huri ki te taha maui, ki te taha matau ranei. Kia tukuna ano, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
 te ture tere motuka motuka:
Ma te whakamahi i te puranga tuururu maha, rotating 1 Whakapaihia ia wa, te uara tere o nga huringa motuka nui e tata ana ki te tata 0.2 wae. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Ma te whakamahi i te puranga tuururu maha, I roto i te aratau ā-ringa, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 wae, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 wae. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. Whakaahua Whakauru Hua

6. Aratohu Whakauru Hua
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the equipment to the receiver through wires.
3. After fixing the receiver, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. E taunaki ana kia whakatakotoria ki runga i te tihi o te rūnanga hiko mo te paanga tohu pai. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Rawa, install the battery on the remote control, Whakanohia te taupoki pākahiko, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Nga Taumata Whakauru

6.3 He hoahoa tohutoro a te kaiwhiwhi

7. Tohutohu Mahi Hua
7.1 Tautuhinga Raraunga Whakawhiti Mamao
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, whakatika i te tere o te motuka iti ki 25 on both sides, rānei 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 wā;
Whakamahia te “Te whakahaere tere motuka iti” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, Tahuri te whaarangi ki te mutunga,whiriwhiri “Save” to exit, and press the enable button to exit the menu;
Ko nga tohu e whai ake nei:
Nui rawa atu: feedback range of large motor current, set range 15-200A, hapanga 100;
Nga tohu hiko tere: Aratau Aunoa, small motor automatically accelerates faster or slower,te iti ake te tere, set range 200-1500, hapanga 800;
Tohu tinihanga: Set the upper limit that allows the motor speed to change. I te wa e whakarereke ana i tenei wa o tenei uara, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, me te whānuitanga o 05-12 and a default of 06;
Whakatere A1: The larger the motor speed, the faster it increases, me te whānuitanga o 00-06 and a default of 01;
The A2: The larger the motor speed, the faster it decreases, me te whānuitanga o 00-06 and a default of 02;
Whakahohea te Ture Tere: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Tīmatahia te hopu-whaiaro: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Te haere nui: maximum speed of left and right motors, tuarā maunga 10-100, hapanga 50;
Tapahi i naianei: maximum cutting current, displayed on the screen as IC value, tuarā maunga 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Te tau tere taunoa: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Aratau Aunoa: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 ki 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
He nui te ope nui: maximum speed of the large motor, tuarā maunga 10-100, hapanga 50;
Mbus equipment (whakahauanga): Selection of large motor frequency converter model, tuarā maunga 00-03, hapanga 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon)
Nga taputapu SBU (whakahauanga): Te kowhiringa mo te motuka motuka motuka iti, tuarā maunga 00-05, hapanga 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon)

04-Anchuanda 05-kaore

7.2 Te tautuhi i te tautuhinga o te kaitahuri
1. Te kowhiringa o nga Rangahau: Haumaru Whakawhitiwhiti Whakawhitiwhiti
2. Te kowhiringa rauemi matua: Whakawhitiwhiti i hoatu
3. Te reinga baud: 19200
4. Hōputu raraunga: Kaore he whakaotinga, Hōputu raraunga<8-N-1>
5. Wāhitau ā-rohe: Whakaturia te kaitahuri maui ki te taha maui ki 1, Ko te kaitahuri tika ki te 2, me
the large motor frequency converter to 3
7.3 Tohutohu Whakahaere Whakahaere Mamao
1. Te mana ki te miihini, Tahuri ki te mana mamao, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (Hūpeke tenei taahiraa ki te mea kua oti kē te kaihanga miihini);
2. Whakatauhia nga tohu o te kaitahuri o te waa (skip this step if the machine manufacturer
has already set it);
3. Whakatauhia te mana mamao ki te aratau ā-ringa, and then use the remote control to move the machine to
the working position;
4. I roto i te aratau ā-ringa, set the cutting current of the large motor to IC and the speed of the large motor
5. Huri ki te aratau aunoa ka whakanoho i te taapiri tere tere f mo te motuka iti;
6. I roto i te aratau aunoa, Hurihia te huringa motuka nui ki te anga whakamua ki te timata i te motuka nui, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Nga Whakawhiwhinga Hua

9.Whakatikatika
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Mena kaore i whakamahia mo te wa roa, please remove the battery and store the remote control and battery in a clean
and safe place.
6.I te rokiroki me te waka, attention should be paid to moisture and shock resistance.

10. Nga korero mo te Haumaru
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. Mena e hiahiatia ana te whakatikatika, Tena whakapā atu ki te kaiwhakanao. Mena he kino te kino na te whakatikatika i a ia ano, the manufacturer
will not provide warranty.

Āhua: DH01R-4W-26K

Nga taputapu e tika ana:momo taputapu ahumahi

2.Hoahoa Hua

Rangi: Ka taea e koe te whiriwhiri i tetahi o nga antenas e toru. The suction cup antenna is standard by default.

3.Whakaahuatanga Tauira Hua

Rangi:
① DH01R raupapa, Mena kei roto i te mauiui te t, te tikanga me te putanga ohorere te aukati;kaore he t, it means without emergency stop output.

Ae, kaore he putanga kupu, Kaore he take o te korero 0w, 0R ranei; Ko te Anulogquariaties W1, W2, W3, me te W4 taunoa ki te 0-10v Agent putanga; I te wa ano, Ka taea te whakawhānui atu a W1 me te W2 2 Nga Whakaputanga Poto Whakatakotoranga Mamati, me te whānuitanga o 0 -5K ohms, ½ watt; taumira: 20 ohms. Ka taea te whakamahi i nga hua e rua e rua ki te whakahaere i te arai i nga wa o te miihini o te miihini raima. Mena ka hiahiatia te putanga o te hauotatorangi Potontioment, user notes are required.

④analog, Tuhinga ka whai mai 1 ki 2, e whakaatu ana kei reira 1 ki 2 whakauru whakauru(mutunga rawa 2 tīkau); Mena he whakauru whakauru, Me tuhi e koe te whānuitanga o te whakauru ingoa (Ka tau te kaiwhiwhi ki te 0 -5K, Ka taea hoki e te kaiwhakamahi te tuhi ano 4-20 Ma, 0-10v ranei, etc.) me te whakaaturanga whakaatu e rite ana ki te nui o te tauana (Hei tauira: whakakite 0-100 Tuhinga o mua 0-1000 aporo)

These two analog quantities can be used as displays for welding current and welding voltage.

4.Ngakau

1) Rahi 26 Nga Whakaputanga Tuku;
2) Rahi 4 Tuhinga o mua (Ka taea te whakarite i te waahanga whakaatu): Tautoko 2 Ko nga waahanga o te putanga Potomenthometer isoment;
3) 2 Whakauru Waitohu; ka whakaatuhia ki te mana mamao, Ka taea te whakarite i te whānuitanga whakaatu
4) 1 nga awa o te aukati aukati ohorere ka kati nga hononga;
5) Powered by 3 AA pākahiko, Hoahoa Whakaora Poari;
6) Te tawhiti o te mahi ahokore 200 mita;
7) Tiaki Ahuru IP67;
8) Me te mahinga whakawhiti whakawhiti, Ka tautokohia e rua nga huringa whakawhiti 4-ahunga;
9）Back strap design.

5.Whakaahuatanga Whakawhiti Mamao

6.Whakaatuhia te Whakataki i te Panuitanga

W1 Knob Uara: W1: 0-1000 (Parameter ka taea te whakarite 0-9999)
W2 Knob Uara: W2: 0-5000 (Parameter ka taea te whakarite 0-9999)
W3 Knob Uara: W3: 0-5000 (Parameter ka taea te whakarite 0-9999)
W4 Knob Uara: W4: 0-5000 (Parameter ka taea te whakarite 0-9999)
Whakaatu urupare ADC1: 0-1000 (Parameter ka taea te whakarite 0-5000)
Whakaaturanga Urupare ADC2: 0-1000 (Parameter ka taea te whakarite 0-5000)

Ngaohiko iti: He iti rawa te pākahiko mana whakahaere, please replace the battery.

Kua heke te whatunga: Ko te tohu ahokore ka haukotia. Tena tirohia te mana o te kaiwhiwhi, mana i runga ano, and restart the remote control.

7.Tohutohu Mahi Mahi Mamao

1) Tahuri ki te mana mamao
Ka whakatauhia te kaiwhiwhi i runga i, Ko te kaiwhiwhi e mahi ana i te tohu; Tāutahia e rua nga pākahiko AA i te mana mamao, Tahuri ki te huringa mana, Na ka whakaatu te whakaaturanga i te uara,e whakaatu ana i te tiimata angitu. The receiver working indicator light becomes solid.
2) Whakawhiti me nga mahi pātene
Ko nga mahi o te huringa hurihuri me te paatene i runga i te mana mamao ka taea te whakahaere i te tohu tohu tohu whakawhiti e tika ana ki te kaiwhiwhi. Ko nga tohu o nga tohu taapiri katoa kei runga i te kaiwhiwhi e tuwhera ana nga tohu ma te taunoa;
3) Te whakatikatika tere w1-w4
Hurihia nga puku i te W1-W4. Ko te tohu tohu ingoa i te mutunga o te kaiwhiwhi e taunoa ana ki te tohu ngaohiko 0-10V, me te tohu pottimetements taunoa ki te 0-5k;
4) Mahi Whakatikatika ohorere
A, no te pehia te pātene aukati ohorere, Ko nga putanga tohu hurihuri katoa e hono ana, ka honoa te putanga kupu; I muri i te wa ohorere ka tukuna te aukati, Ko nga tohu whakawhiti katoa kua whakahokia mai, ka whakahokia mai te putanga ingoa; 5 hēkona i muri i te huringa o te mana mamao, Ko nga putanga tohu hurihuri katoa e hono ana, ka noho tonu te rohe taapiri. Ka huri te mana mamao, Ko te putanga tohu tohu whakawhiti aunoa;
5) Tahua Parakete (Ka rukuhia nga kaiwhakamahi ki te whakarereketanga i a ia ano)
Ko etahi mahi o te mana mamao ka taea te whakatika ma nga tohu. A, no te Whakaatu W1 = 0, pēhi i te pātene K9-B 3 nga wa i roto i te rarangi, ka pato i te paatene K9-a 3 Nga wa i roto i te rarangi ki te whakauru i te tahua tohu; K9-a me te K9-B Key ki te whaarangi ma te tahua me te whiriwhiri i nga tohu; pupuri k1-a, ka pato i te paatene K9-a b ki te whakarereke i nga tohu;
Puta i te tahua tohu: Kōwhiria kia penapena, kaua e penapena, ka pato i te paatene K1-a ki te whakaū i te putanga;
F1W1 te whānuitanga: Ko te uara whakaatu o te W1 Knob i runga i te mata whakaatu, Tuhinga ka whai mai 0 ki 9999;
F2w2 whānuitanga: Ko te uara whakaatu o te W2 kumara i te mata whakaatu, Tuhinga ka whai mai 0 ki 9999;
F3W3 awhe: Ko te uara whakaatu o te W3 Knob i runga i te mata whakaatu, Tuhinga ka whai mai 0 ki 9999;
F4W4 Rangi: Ko te uara whakaatu o te W4 P4 i te mata whakaatu, Tuhinga ka whai mai 0 to 9999
F5A1 awhe: Whakaatuhia te uara urupare adc1, 0-5000 taea te whakarite;
F6a2 whānuitanga: Whakaatuhia te uara urupare adc2, 0-5000 taea te whakarite;
Te whakaohooho i naianei: Whakaritea te uara whakaoho mo te whakaaturanga urupare me te ADC2. I te wa e nui ake ana te ADC1 me te ADC2, Ko te whakaaturanga mana mamao ka whakaoho; I te wa e 0, he kore te mahi whakaohooho;

8.Nga tohu hiko hiko

9.Rahi Mana Mamao

The final interpretation right of this product belongs only to our company.

Āhua: DH12S-P6S

Nga taputapu e tika ana:Ko te tohu waea / rau i whakakikorua miihini

2.Hoahoa Hua

Rangi: Ka taea e koe te whiriwhiri i tetahi o nga antenas e toru. The suction cup antenna is standard by default.

3.Whakaahuatanga Whakawhiti Mamao

4.Whakataki Whakaaturanga

Te tere motuka nui: Matua: 0-50
Te tere o te motuka motuka: Tātai: 0-50
Te Rahi Tere Tere o te Tapahi Tango Aunoa: Tere: 0-30
(Nga tohu e taea ana te whakarite)
Te tapahi aunoa i nga motuka motuka matua o naianei: Whakatakoto: 28 (Nga tohu e taea ana te whakarite)
Te tere o te motuka motuka: Karawhiu: 0-50

Ngaohiko iti: He iti rawa te pākahiko mana whakahaere, please replace the battery.

Kua heke te whatunga: Ko te tohu ahokore ka haukotia. Tena tirohia te mana o te kaiwhiwhi, mana i runga ano, and restart the remote control.

5.Tohutohu Mahi Mahi Mamao

1) Tahuri ki te mana mamao

Ka whakatauhia te kaiwhiwhi i runga i, Ko te maama o te D2 te rama i runga i te kaiwhiwhi kei te haere tonu, me te rama tohu D1 ka tiimata te tiimata; Tāutahia e rua nga pākahiko AA i te mana mamao, Tahuri ki te huringa mana, Na ka whakaatu te whakaaturanga i te tere o te motuka, indicating successful startup.

2) Te motuka motuka nui me te ture tere / motuka motuka me te ture tere

Pēhi me te pupuri “Whakahohehia te ture tere”, Tahuri te “Whakamua / whakamuri” hurihuri ki mua, a ka tahuri te motuka nui o te kaiwhiwhi;
Pēhi me te pupuri “Whakahohehia te ture tere”, Tahuri te “Whakamua / whakamuri” hurihuri ki te hoki whakamuri, a ko te motuka nui o te kaiwhiwhi ka huri ke, ka huri;Me neke noa te whakawhiti ki te ahunga o waenga, ki te anga whakamuri ranei, Na ka mutu te motuka nui, me te kore e pana i te paatene tere;Hurihia te “Motuka nui” Pou hei whakatika i te huringa tere o te motuka nui o te motuka nui ki te 0-10v;

3) Motuka hikoi

Pēhi me te pupuri “Whakahohe tere”, Tahuri te “Whakamua / whakamuri” hurihuri ki mua, ki muri ranei, a ka neke te motuka hikoi i te tere tere o 50;

4) Hurihia te motuka motuka me te ture tere

Tahuri te “Hurihia te ringa / hurihuri” Huri ki te huri i te ringa, i te reti ranei, Na ka tiimata te motuka o te ringa o te kaiwhiwhi; ka huri i te “Te whakatikatika tere” Peke ki te whakatika i te tere motuka motuka;

Pēhi me te pupuri “Whakahohe tere”, ka kumea te “Hurihia te ringa / hurihuri” pana, Ka tere te motuka o te motuka a Swing i te tere o te 50;

5) Te whakatikatika i te motuka motuka motuka motuka

Pēhi me te pupuri i te “Whakahohe tere” pātene me te huri i te “Te whakatikatika tere” Hei whakatikatika i te rohe tere tere o te motuka haere i te wa tapahi aunoa;

6) Tapahi aunoa

Ko te mahi tuatahi ko te timata i te motuka matua; Ko te taahiraa tuarua ko te whakatika i te rohe tere tere o te motuka hikoi; Ko te waahanga tuatoru ko te neke i te “whakamua / whakamuri” hurihuri whakamua, whakamuri ranei ki te whakauru i te aratau tapahi aunoa;

7) Tahua Parakete (Ka rukuhia nga kaiwhakamahi ki te whakarereke i te kore whakaaetanga)

Whakauruhia te tahua tohu:I roto i te aratau ā-ringa, A, no te tere o te motuka motuka 0, pana te hurihuri whakamua / whakamuri hurihuri kia toru nga wa i roto i te rarangi, Na ka pana ki raro i te toru nga wa i roto i te rarangi ki te raarangi taapiri;
Puta i te tahua tohu: Hurihia te tere tere tere, Whiriwhiria te Tiaki, kaore ranei, ka pēhi i te pātene Whakahohe kia whakaū;
I tohua i naianei: Ko te uara nui o te motuka nui o naianei, waeine ampre;
Nga tohu whakatikatika tere: Tapahi Aunoa Aunoa, hapanga 800, wae Milli tuarua,Kua aukatia te whakarereketanga;
Tohu tinihanga: I te wa e nui ake ai te uara whakarereke i tenei wa, Ka tiimata te tiimata tere, waeine ampre;
Whakatere A1: I te wa e iti ake te tapahi i te tapahi i te waa o te tapahi i naianei, Ko te uara tere i piki ake e ia huringa o te motuka hikoi;
The A2: I te wa e teitei ake te tapahi i te waa i te wa e tapahi ana i te waa, Ko te uara tere ka whakahekehia e ia tangata he pohehe o te motuka hikoi;
Kauhoe i te ringa: Uara taunoa, Kua aukatia te whakarereketanga;
Aukati i te waa: I muri i te aratau aunoa i te aukati i te aukati, Ko te waa ka kitea ano i muri i te waa o te waa. Mena he iti ake te mea i te waa kua whakaritea, Ko te motuka hikoi ka tiimata aunoa; wehenga tuarua, uara taunoa, Kua aukatia te whakarereketanga;
Nui rawa atu: Te whānuitanga o nga urupare motuka matua o naianei, waeine ampre;
He nui te ope nui: Mamao te whakahaere i te motuka motuka motuka motuka motuka motuka;
Te haere nui: Tohu kore;
Ko te rohe tere tere: I roto i te tapahi aunoa, Ko te whakaaturanga mana mamao e haere ana i te rohe tere o te motuka = 50% Tuhinga o mua;
Whakanuia te Tohu: I te wa e piki ake ana te urupare a te motuka mo te motuka, I ia wa ka piki ake te nui o tenei uara, Ko te motuka hikoi te whakatere;
Whakaitihia te Maarama: A, no te heke o te urupare o te motuka nui o te motuka, me ia wa ka piki te uara ki tenei uara, Ko te motuka hiko e tarai ana;
Te Whaiti Whanui: Tāpirihia me te tango i te pikinga o te taapiri o te taatai ​​totika;
Whakaritea i naianei: Tapahi aunoa, Ko te paepae o te urupare motuka matua o naianei. Mena kua nui ake tenei uara,Ka tiimata te motuka hikoi ki te tinihanga;Kei raro iho i tenei uara, Ko te motuka hikoi ka tiimata ki te whakatere;aronui: Kano remu;
Tuhinga o mua: Ka timata te aratau aunoa, Mena he iti ake te urupare a te motuka mo tenei wa,Ka waiho i roto i te aratau idling.Ki te mea he greaterrtan tenei uara, Ka puta te aratau idling ka uru ki te aratau tapahi.Unit ko te ampere;
Kore-kawenga o naianei:Ka timata te aratau aunoa, Mena he iti ake te urupare a te motuka mo tenei wa,Kei roto i te aratau kore-uta.Ki te mea he greaterrtan tenei uara, Ka puta atu i te aratau kore-uta me te whakauru i te aratau tapahi.Unit ko te ampre;
Te tere o te ringa: Te tere tuatahi o te miihini Arm i te wa e tiimata ana;
Aratau tapahi: Hurihia i waenga i te mata ka kite me te waea kua kite i nga momo ahua, Na ka huri nga taatai ​​i muri i te huringa; I roto i te matatau, Ko te whakaaturanga mana mamao ka tapirihia he motuka arching, I te wa e waea ana te waea, kaore he motuka arching;
Te wa tautohetohe: A, no te nui ake te urupare a te motuka o te motuka o naianei, Ko te urupare o naianei ka kitea tonu. Ko te wa tautohetohe ko te roanga o tenei kitenga tonu.A muri i tenei waa, Mena kei te nui tonu te motuka o te motuka nui, Ka mutu te motuka hikoi;rerekē, Ka mutu te motuka hikoi. Ka haere tonu te motuka;
Mutu i naianei: Ko te urupare a te motuka nui rawa atu i tenei uara, a ka mutu te motuka hikoi;Ko te Wahanga he Amphare;
Taunoa Taunoa: Ko te uara tuatahi o te rohe tere o te motuka motuka i te wa e huri ana te mana mamao = 50% Tuhinga o mua;

6.Nga tohu hiko hiko

7.Rahi Mana Mamao

The final interpretation right of this product belongs only to our company.

Āhua: DH12S-LD

Nga taputapu e tika ana:Ko te waea miihini miihini miihini

Hoahoa Hua

Rangi: Ka taea e koe te whiriwhiri i tetahi o nga antenas e toru. The suction cup antenna is standard by default.

Whakaahuatanga Whakawhiti Mamao

Whakataki Whakaaturanga

Tere motuka nui：S1：0-50
Tere motuka iti: S2: 0-50
Taputapu taumahatanga ahuru:F:0-30(ParametersadJahattal)
Te tapahi aunoa i te nuinga o te waa: Ic: 0-35 (Nga tohu e taea ana te whakarite)
Te uara whakatikatika raina: DF: -99-99 (1 Ko te waahanga te 0.02v)

Ngaohiko iti: He iti rawa te pākahiko mana whakahaere, please replace the battery.

Kua heke te whatunga: Ko te tohu ahokore ka haukotia. Tena tirohia te mana o te kaiwhiwhi, mana i runga ano, and restart the remote control.

Tohutohu Mahi Mahi Mamao

1.Tahuri ki te mana mamao

Ka whakaukia te, Ko te rama RF-LED i runga i te kaiwhiwhi ka tiimata ki te uira;Tāutahia e rua nga pākahiko AA i te taha maui mamao, Tahuri ki te huringa mana, ka whakaatu te whakaaturanga i te tere o te motuka, indicating successful startup.

2.Te tikanga motuka me te whakahaere tere

Tahuri te “whakamua / whakamuri” hurihuri ki mua, Ko te motuka nui o te kaiwhiwhi ka huri, Na ka whakaatu te whakaaturanga

Tahuri te “whakamua / whakamuri” hurihuri ki te hoki whakamuri, Ko te motuka nui o te kaiwhiwhi ka huri whakamuri, a ka whakaatu te whakaaturanga

Hurihia te “Te whakatikatika tere motuka motuka” Pou ki te whakatika i te tere tere o te motuka motuka mo te motuka motuka tere 0-10v;

3.He motuka motuka iti me te ture tere

Nukuhia te “whakamua / whakamuri” hurihuri ki mua, Ko te wira maui ki mua me te wira tika i mua o te kaiwhiwhi kua huri, me te whakaatu whakamua

Tahuri te “Whakamua / whakamuri” hurihuri ki te hoki whakamuri, Ko te taha maui ka hurihuri whakamuri me te wira tika te hurihuri o te kaiwhiwhi, Na ka whakaatu te whakaaturanga

4.Tahuri taha maui me te taha matau

Tahuri te “Maui / matau” huri ki maui, Ko te wira tika a te kaiwhiwhi e haere whakamua ana ka huri,Na ka whakaatu te whakaaturanga i te taha maui

Tahuri te “Tahuri maui / matau” hurihuri ki te huri matau, ko te wira maui o te kaiwhiwhi ka haere whakamua ka huri, Na ka whakaatu te whakaaturanga i te taha matau

5.Tahuri ki te waahi

I roto i te aratau ā-ringa:
Tahuri maui ki te waahi: Pēhi me te pupuri i te “Whakamana” pātene, Tahuri te “Taha maui / taha matau” huri ki maui, Ko te wira maui ka hoki whakamuri me te wira tika o te kaiwhiwhi kua tahuri,ka tiimata ki te huri i te taha maui;

Tahuri matau ki te waahi: Pēhi me te pupuri i te “Whakamana” pātene, Tahuri te “Taha maui / taha matau” Huri ki te taha matau, Ko te wira maui i mua me te wira tika e huri whakamuri ana i te kaiwhiwhi, ka tiimata te kaiwhiwhi ki te huri matau;

6.Te whakatikatika i te motuka motuka motuka iti

I roto i te aratau aunoa: pēhi me te pupuri i te “Whakamana” pātene me te huri i te “Te whakatikatika tere motuka motuka” Hei whakatika i te tere teitei o te motuka iti i te wa tapahi aunoa;

7.Tapahi aunoa

Ko te mahi tuatahi ko te timata i te motuka nui; Ko te mahi tuarua ko te huri i te aratau aratau ki “Motokā”; Ko te taahiraa tuatoru ko te tiimata i te motuka iti me te mata ka whakaatu “Tapahia Aunoa”,e whakaatu ana kua uru atu ki te aratau tapahi aunoa;

8. Whakatikatika Raina

I te wa e neke whakamua ana nga motuka maui me te taha maui me te taha matau, Ko te taha maui me te taha matau kaore i te rite, Na ko te huringa haere tika. Ka taea e koe te whakamahi i te mahi whakatikatika mo te mana mamao ki te pai-ki te huri i te tere o nga wira maui me te taha matau;
Parau tumu parau: Na roto i te mahi whakatika, He tere te tere o te wira maui ki te eke ki te tere rite te wira tika, kia rite ki te tukutahi i te tere o nga wira maui me te taha matau me te whakakore i te wehenga;
Whakatikatika Whakatikatika Whakahaere Mahi: I roto i te aratau ā-ringa, pēhi me te pupuri i te “Whakamana” pātene me te huri i te “Ture iti motuka motuka”;
Hurihia te karaka ki te whakapiki i te huringa o te wira maui me te uara whakatikatika i runga i te mata whakaatu ka piki ake;
Hurihia te taapiri kia whakaitihia te wira o te wira e tere ana me te uara whakaaturanga whakaaturanga hei whakaiti;
Whakatika: Te uara whakatikatika -90 ki 90; Ko te whakatikatika whakatikatika o tetahi waahanga whakatikatika ko te 0.02v;

9. Tahua Pararau (Ka rukuhia nga kaiwhakamahi ki te whakarereke i te kore whakaaetanga)

Ko etahi mahi o te mana mamao ka taea te whakatika ma nga tohu. I roto i te aratau ā-ringa, i te wa e tere ana te motuka motuka S2 10, pana te hurihuri whakamua / whakamuri hurihuri kia toru nga wa i roto i te rarangi, katahi ka pana ki raro i te toru nga wa i roto i te rarangi ki te whakauru i te tahua tohu;
Puta i te tahua tohu: Kōwhiria kia penapena, kaua e penapena, Na ka pato i te paatene Whakahohe kia whakaū i te putanga;
Nui rawa atu: Ko te mahinga o te waa o te motuka tapahi ko te 80% Tuhinga o mua;
Nga tohu hiko tere: Tapahi Aunoa Aunoa, hapanga 800, Kua aukatia te whakarereketanga;
Tohu tinihanga: Tapahi Tango Aunoa. I te wa e nui ake ai te uara whakarereke i tenei wa,deceleration begins.
Whakatere A1: Tapahi Tango Aunoa, I te wa e iti ake te tapahi i te tapahi i te waa o te tapahi i naianei, Tuhinga o mua;
The A2: Tapahi Tango Aunoa, Ka teitei ake te tapahi i te waa i te huinga
Tapahi i naianei, Tuhinga o mua;
Te Whakahoutanga Minita Aunoa: koremana;
Tīmatahia te hopu-whaiaro: 0, Kaore he maukati-whaiaro; 1, Te maukati-whaiaro. Pēhi i te matua Whakahohe + forward and reverse to take effect and self-lock.
Te haere nui: the maximum speed of the small motor.
Tapahi i naianei: Whakatakotoria te nui o te waa o te motuka matua mo te tapahi aunoa. Mena he nui ake te utu o te urupare i tenei wariu, it will start to decelerate.
Te tau tere taunoa: the default maximum speed of automatic cutting speed when turning on the machine.
Aratau Aunoa: 0, Ko te huringa aunoa ka whakahaerehia aunoa; 1, the automatic switch controls the automatic IO output point.
Ko te rohe tere tere: the maximum speed of the small motor during automatic cutting.
He nui te ope nui: maximum speed of large motor.

Nga tohu hiko hiko

Rahi Mana Mamao

The final interpretation right of this product belongs only to our company.