ahokore hikohiko – Hangarau wixhc https://www.wixhc.cn Kaiawhina Ahumahi Mon, 22 Jun 2026 06:35:22 +0000 mi hourly 1 https://wordpress.org/?v=6.8.5 UWGP hiko waea hiko https://www.wixhc.cn/product/wired-electronic-handwheel-uwgp Mon, 22 Jun 2026 05:15:51 +0000 https://www.wixhc.cn/?post_type=product&p=4688

1.Kupu whakataki

Wireless Remote Control is used for manual guidance, tūranga, tool setting and other operations of CNC machine tools. Ko tenei hua ka tango i te hangarau whakawhiti ahokore, Te whakakore i te hononga waea waea tuku iho, te whakaiti i nga taputapu whakaheke i puta mai i nga taura, te whakakore i nga ngoikoretanga o te toia taura, Nga otaota hinu, etc., and is more convenient to operate.It is widely applicable to CNC machine tools such as gantry machining centers, gantry vertical lathes, and CNC gear processing machines, and is compatible with various mainstream CNC system brands on the market, including Siemens, Mitsubishi, Kiriweti iri, Syntec and more.

 

2.Nga waahanga Hua

1. Ka whakamahi i te hangarau whakawhitiwhiti ahokore 433MHz me te tawhiti mahi ahokore o 20 meters.
2.Te peke auau urutau; 32 sets of wireless remote controls can be used simultaneously without interference.
3.Supports the emergency stop button, and the emergency stop button remains effective even after the remote control is powered off.
4.Tautoko 3 custom buttons with switching IO signal output.
5.E tautoko ana i te mana tuaka 6, me 7 to 12-axis control is customizable.
6. E tautoko ana i te mana whakanui 3-tere, and 4-speed magnification control is customizable.
7.e tautoko ana i te mahi paatene whakahohe, ka taea te whakaputa i nga tohu IO whakawhiti, me te whakahaere hoki i te kowhiringa tuaka, magnification and encoder.
8.Supports modifying the encoding type of axis selection and magnification via software.
9. Supports pulse encoder with specification of 100 pulses per revolution.
10. Supports standard Type-C charging with 5V-2A charging specification; built-in battery
specification: 14500 / 1100mAh.

 

3. Whakatakotoranga Hua

Working Voltage and Current of Handheld Terminal 3.7V/20.0mA
Charging Battery Specification
3.7V/14500/1100mAh
Low Voltage Alarm Range of Handheld Terminal <3.35K
Receiver Power Supply Voltage DC5V-24V/1A
Receiver Emergency Stop Output Load Range AC125V-1A/DC30V-2A
Receiver Enable Output Load Range AC125V-1A/DC30V-2A
Receiver Custom Button Output Load Range
DC24V/50mA
Receiver Axis Selection Output Load Range DC24V/50mA
Receiver magnification Output Load Range DC24V/50mA
Handheld Terminal Transmit Power
15dBm
Kaiwhiwhi whiwhi tairongo -100dBm
Te auau whakawhitiwhiti ahokore
433MHz roopu auau
Wireless Communication Distance
20 meters barrier-free distance
Operating Temperature -25℃<Whakaahua x<55℃
Safe drop height
1 m
Number of Custom Buttons
3
Product Weight 546.86（g）
Product Dimensions 200*87*72(Mm)

 

4. He kupu whakataki hua

Pukapuka:

① Emergency Stop Button:
Pēhi i te pātene aukati ohorere, the two groups of emergency stop IO outputs on the receiver will disconnect, and all remote control functions will be invalidated.Release the emergency stop button, the emergency stop IO outputs on the receiver will be closed, and all remote control functions will be restored. Hei taapiri, even if the remote control is powered off, pressing the emergency stop button can still activate the emergency stop IO output of the receiver.
② Enable Button:
Press either enable button on both sides, the two sets of enable IO outputs on the receiver will conduct. Release the enable button, and the enable IO outputs will disconnect. It is necessary to press and hold the enable button before toggling axis selection, magnification or rotating the remote control for the operation to take effect.This function can be canceled through the configuration software.
③ Axis Selection Switch (Power Switch):

Pēhi me te pupuri i te pātene Whakahohe, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.

④ Pulse Encoder:

Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.

⑤ LCD Display Screen:

5. Product Accessories Diagram

 

6. Aratohu Whakauru Hua

6.1 Tikanga whakaurunga Hua

1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.
2. Tirohia ki to maatau Kaipupuri Kaihoko, Whakatauritea me o taputapu taputapu, and connect the equipment to the receiver with cables.
3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; rerekē, signal failure may occur.
4. Rawa, turn on the remote control power switch, then you can remotely operate the machine via the remote control.

6.2 Receiver Installation Dimensions

6.3 He hoahoa tohutoro a te kaiwhiwhi

7. Tohutohu Mahi Hua
1. Te hiko i runga i te miihini me te kaiwhiwhi. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.
2. Select the axis : Pēhi me te pupuri i te pātene Whakahohe, toggle the axis selection switch to select the axis to be operated.
3. Select the magnification: Pēhi me te pupuri i te pātene Whakahohe, toggle the magnification switch to select the required magnification gear.
4. Axis movement: Pēhi me te pupuri i te pātene Whakahohe, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.
5. Pēhi me te pupuri i tetahi pātene ritenga, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.
6. Pēhi i te pātene aukati ohorere, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.
7. If the wireless remote control is not operated for a period of time, ka uru aunoa ki te aratau moe hei whakaiti i te kohi hiko. It can be used normally again by pressing the enable button again.

8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life

8. Whakaahuatanga Tauira Hua

①：UWGP stands for appearance style.
②：Pulse Output Parameters：
01: E tohu ana ko te tohu whakaputa ko te A, B; Pulse Lolgal 5V; pulse quantity 100PPR.
02: E tohu ana ko te tohu whakaputa ko te A, B; Ngaohiko Pulse 12V; pulse quantity 25PPR.
03: E tohu ana ko te tohu whakaputa ko te A, B, A -, B -; Pulse Lolgal 5V; pulse quantity 100PPR.
04: E whakaatu ana i te putanga-tuwhera o te Taumata Taumata-iti, me nga tohu putanga Pulse o A me B; The number of pulses is 100PPR.

05: E whakaatu ana i te putanga PNP nui-taumata, me nga tohu putanga Pulse o A me B; The number of pulses is 100PPR.

③：Represents the axis selection switch quantity; 6 stands for 6 oka, 7 stands for 7 oka, and so on.
④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.
⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.
⑥: He tohu i te maha o nga paatene ritenga; 3 corresponds to 6 custom buttons.
⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, me 24 stands for 24V power supply.
⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.
9. Nga Whakawhiwhinga Hua

 

10. Maintenance and upkeep

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water to extend the service life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, take. to prevent damage to the precision components inside the remote control or accuracy errors.
5. Mena kaore i whakamahia mo te wa roa, please store the remote control in a clean and safe place.
6. Avoid moisture and shock during storage and transportation.

 

11. Nga korero mo te Haumaru

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please charge the remote control in a timely manner when the battery level is too low, to avoid malfunction and operational errors caused by insufficient power.
3. If you repair it yourself and cause damage, the warranty will be void.
]]> He pukapuka tohutohu a-ringa hiko https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Kupu whakataki

Ka whakamahia te ringaringa hiko mo te aratohu ā-ringa, tūranga, Ko te whakahāngai taputapu, me etahi atu mahi i runga i nga taputapu miihini CNC. Ko tenei tauira o te ringaringa hiko he siemens whakaatu tonu i nga whakaaturanga hiko elechonic. Ka hono te ringaringa ki te atanga X130 o te punaha Siemens ma te taura whatunga, Na ko nga whakaurunga punaha ka panuihia, ka whakaatuhia ki te mata LCD o te ringaringa ma te whakawhitiwhiti korero S7. Ka taea hoki e te ringaringa te whakahaere i te kowhiringa a Axis, whakanui, pātene, andother signals through communication.
2.Nga waahanga mahi hua
1. Whakamahia he taura waka 6-matua mo te hononga, me te roa o te taura 10 meters.
2. Ka taea e te mata a-ringa te whakaatu i nga mahi a te punaha mahi, Nga whakaurunga miihini,Te reinga whangai, Axis Whiriwhiringa, whakanui, and other information.
3. Tautoko Peke Kore Tautoko, hurihuri io tohu tohu, and the hand wheel shutdown emergency stop is still valid.
4. Tautoko 6 pātene ritenga, Whakawhiti i nga tohu IO, and can output signals to the system through IO wiring or communication.
5. Tautoko 6 rānei 8 Te whakahaere Axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Tautoko 3 rānei 4 Nga taumata o te mana whakanui, with switch IO signals that can be output to the system through IO wiring or communication.
7. Tautokohia te whakauru a Pulse, 100 Pulses / Tahuri, can output signals to the system through AB pulse wiring.
8. Ka tautokohia nga kawa S7 me nga Siemens 828D, 840DSL, ONE and other model systems.

 

3. Whakatakotoranga Hua
Te Mahi Toha Whakawhiwhi Mahi Handwheel DC24V / 1A
Kaituku Tohunga Kaitiaki Mana DC24V / 1A
Kaiwhakaputa Io Putanga Utu DC24V
Te roa o te wira e mutu ana te roa 10m
Te roa o te kaiwhiwhi mutunga 1m
Te roa o te kaiwhiwhi 3m
Pāmahana whakahaere -25℃<Whakaahua x<55℃
Te teitei anti-hinga 1m
Te rahinga pātene Ritenga 6
Nga Taumata Hua 233*90.7*77.4(Mm)

4.He kupu whakataki hua

Rangi:
Pātene aukati ohorere:
Pēhi i te pātene aukati ohorere, me nga huinga e rua o te wa ohorere o te aukati io i te kaiwhiwhi ka whakakorehia, and all functions of the handwheel will be invalid.
I muri i te tuku i te aukati ohorere, Ko te aukati ohorere i te putanga o te kaiwhiwhi i runga i te kaiwhiwhi kua kati, and all functions of the handwheel are restored.
 whakaaturanga mata:

 

Pc: 0000 e whakaatu ana kaore i te hono te taura whatunga, Pc: 1010 indicates that the network cable is successfully connected to the PLC system.
Pc: 1110 tohu angitu te tuhi angitu o nga raraunga punaha ki te ringaringa, Pc: 0001 represents successful connection to the computer.
③ pātene ritenga:
6 pātene ritenga, ia tangata e hāngai ana ki te wāhi putanga IO ki te kaiwhiwhi, also connected to the system through communication.
 te huringa whiriwhiri:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Whakahohe pātene:
Press me te pupuri i te paatene i nga taha e rua ki te whakahohe i te kaimau Pulse ma te wiri. A ko nga roopu e rua i runga i te kaiwhiwhi e taea ai te whakaputa ki te whakahaere, release the enable button to enable IO output to disconnect.
 te whakawhiti whakanui:Ka taea e te huringa whakanui te huri i te whakanui
controlled by the handwheel.
 te whakauru a Pulse:
Pēhi me te pupuri i te pātene Whakahohe, Wiri i te kaimau pulse, Te whakaputa i tetahi tohu Pulse, and control the movement of the machine axis.
⑧ Cable Handwheel:

Ka taea te hono atu i te ringaringa me te kaiwhiwhi, plug aviation, used for handwheel power supply and communication.

5. Whakaahua Whakauru Hua

6. Aratohu Whakauru Hua
6.1 Tikanga whakaurunga Hua
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Tirohia ki to maatau kaiwhiwhi i te hoahoa me te whakataurite i o taputapu taputapu-a-papa. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. I muri i te whakatika i te kaiwhiwhi, Tāutahia te papa rererangi i te waahi whakatuwheratanga o te ringaringa ki te Paewhiri, ka hono atu ki tetahi atu pito o te turanga ki te atanga a-ringa i runga i te kaiwhiwhi. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Nga Taumata Whakauru

6.3 Nga Taumata Whakauru o nga Momo Aviation

6.4 He hoahoa tohutoro a te kaiwhiwhi
7.Tohutohu Mahi Hua

1. Ka whakahaerehia te kaiwhiwhi me te tohu tohu e tohu ana i te kaiwhiwhi, Whakauruhia te kaiwhiwhi ki te rorohiko me te taura whatunga, Whakatauhia te wahitau IP kua whakaritea mo te rorohiko, me te whakamahi i nga punaha taputapu whirihoranga whatunga hei whakarite i nga tohu o te whatunga o te mahi a-ringa. Mo nga tikanga tautuhi motuhake, Tirohia te “LXWGP-ETS I WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI I TE WHAKAMAHI”.

2.I muri i te whakatuunga te kaiwhiwhi, Me whai te punaha i te hotaka PLC. Tena tirohia te “LXWGG-ETS He rereke nga punaha whakahaere i nga punaha whakahaere” and PLC program routine materials for details.

3.I muri i te whakaoti i nga tautuhinga i runga ake nei, Tangohia te kaiwhiwhi ki te rūnanga hiko miihini me te whakauru i te reira. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.I muri i te whakaoti i nga tautuhinga i runga ake nei, Tangohia te kaiwhiwhi ki te rūnanga hiko miihini me te whakauru i te reira. Tangohia te taura whatunga mai i te rorohiko ka hono atu ki roto i te atanga x o te punaha. Connect the receiver power supply and pulse line.
5. Tīpakohia te Whiringa Axis: Switch the axis selection switch and select the axis you want to operate on.
6. Tīkina te whakanui: Switch the magnification switch and select the magnification level you need.
7. Neke toki: Pēhi me te pupuri i te pātene Whakahohe, Tīpakohia te huringa whiriwhiri Axis, Tīpakohia te whakawhiti whakanui, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press me te pupuri i tetahi paatene ritenga kia huri i te putanga o te IO o te paatene i te kaiwhiwhi, and release the button to turn off the output.
9. Pēhi i te pātene aukati ohorere, Ko te aukati i te aukati i te whakaputanga o te kaiwhiwhi ka whakakorehia, Ka monokia te mahi a-ringa, Tukuna te pātene aukati ohorere, Ka kati te putanga ohorere io, and the handwheel function will be restored.
8.Whakaahuatanga Tauira Hua

① LXWGP e tohu ana i te ahua ahua pai, me te atanga whakawhitiwhiti korero a te kaiwhiwhi
is an Ethernet interface.
② : Represents Siemens system specific.
③ : tohu te maha o nga huringa whiriwhiri Axis, tohu nga toki, me te tohu
axes.
④ : tohu te momo tohu o te Axis me te tohu whakanui, He tohu
tohu tohu-ki-tohu tohu, and B represents encoded output signal.

9.He pupuhi raru hua

10.Whakatikatika
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Tena koa karohia te kotiti, hinga, tōpito, take. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Mena kaore i whakamahia mo te wa roa, Tēnā Toa koa te ringaringa ki te waahi ma me te haumaru.During rokiroki me te kawe waka, attention should be paid to moisture and shock resistance.
11. Nga korero mo te Haumaru

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Mena he ahuatanga noa te ahuatanga o te ringaringa, Whakamutua te whakamahi i te waa tonu me te raru. Tuhinga o mua, Ka rukuhia kia whakamahia ano e ia te ringaringa he ki te karo i nga aitua mo te haumaru i puta mai i nga hapa a-ringa kaore e mohiotia ana;
3. Mena e hiahiatia ana te whakatikatika, Tena whakapā atu ki te kaiwhakanao. Mena he kino te kino na te whakatikatika i a ia ano, Kaore te kaiwhakanao e tuku raihana

 

]]> Mamao Ahokore mo te Ahokore mo nga Taha Poari CNC https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Kupu whakataki

Ko te contro mamao ahokore whakatapua mo CNC poutū lathes whakamahia mo te arata'iraa a-ringa, tūranga, tautuhinga taputapu, me etahi atu mahi i runga i nga taputapu miihini poutū CNC. Ko tenei hua ka tango i te hangarau whakawhiti ahokore, te whakakore i te hiahia mo nga hononga wirae puna, te whakaiti i nga taputapu whakaheke i puta mai i nga taura, me te whakakore i nga huakore o te toia taura me te poke hinu, hanga watea ake te mahi. Ko te whanui e pa ana ki nga momo miihini poutū penei i nga miihini poutū CNC, pou-kotahi miro poutū, me nga pou-rua poutū lathes.Ka taea hoki te urutau ki nga momo punaha CNC i runga i te maakete, penei i te siemens,
Mitsubishi, Kiriweti iri, and Syntec.

2. Nga waahanga mahi hua

1. Te tango 433 MHz hangarau whakawhitiwhiti ahokore, me te tawhiti mahi ahokore o 40 meters.
2.Te tango i te mahi peke auau aunoa me te whakamahi 32 huinga o nga kaiwhakahaere mamao ahokore i te wa kotahi, without affecting each other.
3. Tautoko Peke Kore Tautoko, switch IO signal output.
4. Tautoko 2 pātene whakarite, with switch-type IO signal output.
5. Tautoko -2 axis control.
6. Supports 3-level magnification control.
7. Tautokohia te mahi paatene whakahohe, ka taea te whakaputa i nga tohu IO me te whiriwhiri i te tuaka, tauwehe whakarea, a Enchor.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. E tautoko ana i te encoder pulse, me te tohu o 100 pulses per revolution.
3. Whakatakotoranga Hua
Ngaohiko whakahaere me te naianei o te mamao ahokore
3V/14MA
Nga korero mo te pākahiko 2 AA pākahiko kawakore, size 5
Ngaohiko iti awhe whakaoho o te mamao ahokore < 2.3K
Kaituku Tohunga Kaitiaki Mana DC5V-24V/A
Awhe kawenga putanga ohotata kairiiwhi AC125V-1A/DC30V-2A
Ka taea e te kaiwhiwhi te awhe kawenga putanga
AC125V-1A/DC30V-2A
Awhe kawenga putanga o te paatene ritenga a te Kaiwhiwhi DC24V/50mA
Awhe kawenga putanga tuaka kaiwhiwhi DC24V/50mA
Awhe kawenga putanga whakanuia te kaiwhiwhi DC24V/50mA
Te mana tuku o te tauranga-a-ringa
15dBm
Kaiwhiwhi whiwhi tairongo -100dBm
Te auau whakawhitiwhiti ahokore 433MHz roopu auau
Te tawhiti whakawhitiwhiti ahokore Te tawhiti kore arai o 40 mita
Te pāmahana mahi -25℃ < Whakaahua x < 55℃
Anti hinga teitei 1 (mīta)
Te rahinga paatene ritenga 2
4. He kupu whakataki hua



Pukapuka:

① Whakawaehere puoro:
Pēhi me te pupuri i te pātene Whakahohe, Wiri i te kaimau pulse, Te whakaputa i tetahi tohu Pulse,and control the movement ofthe machine axis.
② Patene Whakahohe:
Patohia te paatene whakahohe i tetahi taha, me nga huinga e rua o nga putanga IO i runga i te kaiwhiwhi ka whakahaere. Tukua te patene whakahohe hei momotu i te putanga IO whakahohe; A i mua i te huri i te whakanui i te kowhiringa tuaka me te wiri i te wira ringaringa,me pupuri te paatene whakahohe kia whai hua ai; This function can be cancelled through configuration software.

③ Nga rama tohu:
Maama taha maui: mana ki te marama,ka whakamahi te wīra ringa i te tuaka hei kowhiri i te OFF mo te hiko, a ka noho tonu tenei rama i muri i te hiko;
Maama waenga: he rama tohu e whiti ana i te wa e whakahaere ana i tetahi mahi o te wira ringaringa, a kare e marama ana karekau he mahi;
Marama taha matau: He iti te marama whakaohooho, taumata pākahiko iti,ka whiti tenei rama, ka noho tonu ranei, battery needs to be replaced.

④ Patene mutu ohorere:
Pēhi i te pātene aukati ohorere, me nga huinga e rua o te wa ohorere o te aukati io i te kaiwhiwhi ka whakakorehia, and all functions of the handwheel will be invalid.

⑤ Whakanuia te whakawhiti:
Pēhia me te pupuri i te paatene whakahohe hei huri i te pana whakanui, which can switch the magnification controlled by the handwheel.

⑥ Whakawhiti kōwhiringa tuaka (Huringa Poto):
Pēhia me te pupuri i te paatene whakahohe hei huri i te pana whiriwhiri tuaka, ka taea te huri i te tuaka nekehanga e whakahaeretia ana e te wira ringaringa. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Patene ritenga:
E rua nga patene ritenga, each corresponding to an IO output point on the receiver.

5. Whakaahua Whakauru Hua

6. Aratohu Whakauru Hua
6.1 Tikanga whakaurunga Hua

1. Tāutahia te kaiwhiwhi ki te rūnanga hiko na roto i te maaka i te taha o muri, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Tirohia ki to maatau kaiwhiwhi i te hoahoa me te whakataurite i o taputapu taputapu-a-papa. Connect the equipment to the receiver via cables.
3.I muri i te whakatika tika te kaiwhiwhi, Ko te antena e rite ana ki te kaiwhiwhi me hono, a ko te pito o waho o te antenna me whakanoho ki waho ranei o te rūnanga hiko. E taunaki ana kia whakatakotoria ki runga i te tihi o te rūnanga hiko mo te paanga tohu pai. Karekau kia waiho te antenna kia kore e hono, ka tuu ranei ki roto i te rūnanga hiko, as this may result in the signal being unusable.
4. Rawa, whakakāhia te whakakā hiko o te wīra ringa, and you can operate the machine remotely using the handwheel.

6.2 Nga Taumata Whakauru

6.3 He hoahoa tohutoro a te kaiwhiwhi

7. Tohutohu Mahi Hua
1. Te hiko i runga i te miihini me te kaiwhiwhi. Ka whiti te rama tohu mahi a te kaiwhiwhi. Tāutahia te pākahiko ki roto i te wira hiko ahokore, whakamau te uhi pākahiko, me
whakakāhia te whakakā hiko o te wira hiko ahokore. The handwheel’s battery level indicator light is on.
2. Tīpakohia te toki whakarite: Pēhi me te pupuri i te pātene Whakahohe, takahurihia te pana whiriwhiri tuaka, and select the axis you want to operate.
3. Tīkina te whakanui: Pēhi me te pupuri i te pātene Whakahohe, takahurihia te pana whakanui,and select the desired magnification level.
4. Neke toki: Pēhi me te pupuri i te pātene Whakahohe, Tīpakohia te huringa whiriwhiri Axis, Tīpakohia te whakawhiti whakanui, katahi ka huri i te encoder pulse. Huri karaka hei neke i te
positive axis and counterclockwise to move the negative axis.
5. Pēhi me te pupuri i tetahi pātene ritenga, a ko te patene e rite ana te putanga IO o te kaiwhiwhi ka whakakā. Tukua te paatene, and the output will be turned off.
6. Pēhi i te pātene aukati ohorere, Ko te aukati i te aukati i te whakaputanga o te kaiwhiwhi ka whakakorehia, Ka monokia te mahi a-ringa,Tukuna te pātene aukati ohorere, Ka kati te putanga ohorere io, and the handwheel function will be restored.
7. Mena kaore i te whakahaerehia te ringaringa mo te waa roa, ka uru aunoa ki te aratau moe hei whakaiti i te kohi hiko. Ka whakamahia ano hoki, the handwheel can be activated by pressing the enable button.
8. Mena kaore i te whakamahia te ringaringa mo te wa roa, e taunaki ana kia huri i te rakau wiriwiri ki te tuunga OFF, whakaweto i te mana ringaringa, and extend the battery life.

8. Whakaahuatanga Tauira Hua

① :Ko te ZTWGP te ahua o te ahua
②：Ko nga tohu whakaputa whakaputa:
01: E tohu ana ko te tohu whakaputa ko te A, B; Pulse Lolgal 5V; pulse quantity 100PPR.
02：E tohu ana ko A me B nga tohu whakaputa; Ngaohiko Pulse 12V; pulse quantity 100PPR.
03：E tohu ana ko nga tohu whakaputa ko te A, B, A -, B -; Pulse Lolgal 5V; pulse quantity 100PPR.
04：E whakaatu ana i te putanga-tuwhera o te Taumata Taumata-iti, me nga tohu putanga Pulse o A me B;The number of pulses is 100PPR.
05：E whakaatu ana i te putanga PNP nui-taumata, me nga tohu putanga Pulse o A me B; The number of pulses is 100PPR.
③：E tohu ana i te maha o nga huringa whiriwhiri tuaka, 2 tohu 2 axes.
④：He tohu i te momo tohu whakakā whiriwhiri tuaka, He tohu tohu tohu-ki-tohu, and B represents encoded output signal.
⑤：He tohu i te momo tohu whakarea whakarea, He tohu tohu tohu-ki-tohu, and B represents encoded output signal.
⑥：He tohu i te maha o nga paatene ritenga, 2 tohu 2 custom buttons.
⑦：He tohu i te tuku hiko mo te wira-a-ringa o te punaha, me 05 represents 5V power supply.
⑧：Ko L te tohu i te pou maui (maui maui maui), ko R e tohu ana i te pou matau (te pupuri maripi matau).

9.He otinga mo nga mahi kino o nga hua

10. Te tiaki hua

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Tena koa karohia te kotiti, hinga, tōpito, take. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Mena kaore i whakamahia mo te wa roa, Tena koa rongoa te ringaringa i te waahi ma me te haumaru. I te rokiroki me te waka, attention should be paid to moisture and shock resistance.

11. Nga korero mo te Haumaru

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Mena e hiahiatia ana te whakatikatika, Tena whakapā atu ki te kaiwhakanao. Mena he kino te kino na te whakatikatika i a ia ano, Kaore te kaiwhakanao e tuku raihana

]]> FANC Whakatakotoranga Ahokore Ahokore Ahurei https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Mei 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Kupu whakataki

Ko te Haumaru Windows Ahokore e whakamahia ana mo te aratohu ā-ringa, tūranga, Ko te whakahāngai taputapu,me etahi atu mahi i runga i nga taputapu miihini CNC. Ko tenei hua ka tango i te hangarau whakawhiti ahokore, Te whakakore i te hononga waea waea tuku iho, te whakaiti i nga taputapu whakaheke i puta mai i nga taura, Te whakakore i nga ngoikoretanga o te tohenga taura me nga otaota hinu, me te mahi i nga mahi mahi ake. Ko tenei tauira o te ahorangi ahokore hikohiko ko te ringaringa i whakatapua mo te punaha fanucuc. Ka whakaatuhia te punaha pūnaha Fanc i te waa-i runga i te mata o te ringaringa i roto i te kawa IO-hono, me te tohu toki,whakanui, me nga tohu tohu e hono tika ana ki te punaha ma te kawa IN-Link, reducing wiring.

2. Nga waahanga Hua
1. Whakawhanake i te hangarau whakawhitiwhiti a 433MHZ, Te tawhiti o te mahi ahokore 40 mita;
2. Whakamahia te Mahi Aunoa Aunoa Aunoa, take 32 nga huinga o nga kaihoko ahokore ahokore i te wa ano kaore e pa ki a raatau ano;
3. Tautoko Peke Kore Tautoko, hurihuri io tohu tohu, hono ki te punaha ma roto i te waea;
4. Tautoko 4 pātene ritenga, hurihuri io tohu, tohu tohu ki te punaha ma te kawa ion-hononga;
5. Tautoko te pātene nekehanga tere + me te pātene -, Press me te pupuri i te pihi hei whakakapi i te ringaringa ki te neke i te miihini;
6. Tautokohia te mana 6-Axis, hurihuri io tohu, tohu tohu ki te punaha ma te kawa ion-hononga;
7. Tautoko 1x,10whakaahua x, 100X mana whakahaere . Tautoko Whakawhiti L0 tohu, me nga putanga e tohu ana ki te punaha ma te kawa io-hono;
8. Tautoko te mahi pātene, Tūhono ki te pūnaha mā te waea, me te whakauru i te whakauru i te wa ano;
9. Tautokohia te whakauru a Pulse, 100 Puta / porowhita, Uru ki te atanga a-ringa a te MPG-a-ringa ma te whakaputa i te tohu whakauru a Ab;

3.Whakatakotoranga Hua

4.Nga waahanga Hua

Pukapuka:
Pātene aukati ①emergerger:
Pēhi i te pātene aukati ohorere, Ko nga Putanga Tuarua e rua Io Io i runga i te kaiwhiwhi e honoa ana, a ko nga mahi a te ringaringa katoa he muhu ki te aukati i te aukati ohorere, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

Whakaaturanga ②Screen:

③custom pātene:
4 pātene ritenga, Ko ia pātene e rite ana ki te waahi putanga IO i runga i te kaiwhiwhi, hono ki te punaha ma te iolink. Te āhua nei, the ~ button is set as a high-speed button.
④axis Swection Stoft:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤shorct pātene:
Pēhi i te pātene poto "+" ki te neke whakamua i te miihini, ka pēhi i te pātene tapahi poto "-" ki te neke i te miihini. This can replace turning the hand wheel to move the machine.
Pātene ⑥nable:
Press me te pupuri i tetahi o nga pihi e taea ai e nga taha e rua me te wiri i te kaitohu pulse kia whai hua ai. Na ka tahuri nga roopu e rua o te IO i runga i te kaiwhiwhi. Release the enable button and the enable IO output is disconnected.
⑦ratio huri:
Switching the magnification switch can switch the magnification of handwheel control.
Tuhinga o mua:
Pēhi me te pupuri i te pātene Whakahohe me te wiri i te kaitohu pulse ki te tuku mai i tetahi pense
signal to control the movement of the machine axis.
Ka huri a ⑨power:
Handwheel power button.

5.Hoahoa Hua

6.Aratohu Whakauru Hua

6.1 Tikanga whakaurunga Hua

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Tirohia ki to maatau Kaipupuri Kaihoko, Whakatauritea me o taputapu taputapu, ka hono
the equipment to the receiver via cables.
3. I muri i te whakatau i te kaiwhiwhi, Ko te antena e rite ana ki te kaiwhiwhi me hono,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
E taunaki ana kia whakatakotoria ki runga i te tihi o te rūnanga hiko mo te paanga tohu pai. Ia
kua aukatia te waiho i te antena kaore i te whakakorehia, ka tuu ranei i te annanna i roto i te rūnanga hiko,
which may cause the signal to be unusable.
4.Rawa, Tahuri ki te huringa mana-ringa me te whakahaere i te miihini na
handwheel remote control.

6.2 Nga Taumata Whakauru

6.3 He hoahoa tohutoro a te kaiwhiwhi

7. Tiaki me te tiaki

1. Whakamahia koa ki te waahi maroke me te pāmahana noa me te pehanga hei whakawhānui i te
Te ora ratonga;
2. Tena koa kaua e whakamahia i roto i nga taiao koretake penei i te ua me te mirumiru wai hei whakawhānui atu
te ora ratonga;
3. Tena koa tirohia te ahua o te ringaringa ma te horoi ki te tuku i te ora ratonga;
4. Tena koa karohia te kotiti, hinga, tōpito, take. Hei aukati i te kino o nga waahanga tika
I roto i te ringaringa-a-ringa, he raru ranei;
5. Mena kaore i whakamahia mo te wa roa, Tena koa rongoa te ringaringa i te waahi ma me te haumaru;
6. Pay attention to moisture and shock during storage and transportation.

8. Nga korero mo te haumarutanga

1. Tena panuihia nga tohutohu i mua i te whakamahi. Kaore nga kaimahi-mahi e aukati i
operating.
2. Whakakapia koa te pākahiko i te wa e iti rawa te pākahiko ki te karo i nga hapa na te
insufficient power causing the handwheel to be unable to operate.
3. Mena e hiahiatia ana te whakatikatika, Tena whakapā atu ki te kaiwhakanao. Mena ka pakaru te kino i te whakatikatika i a ia ano,
the manufacturer will not provide warranty.

]]> Ahokore hiko-hiko Ruthoel dwgp https://www.wixhc.cn/product/wireless-electronic-handwheel-dwgp-instruction-manual Wed, 08 Jan 2025 08:16:31 +0000 https://www.wixhc.cn/?post_type=product&p=4608  

1.Kupu whakataki

Ko te Haumaru Windows Ahokore e whakamahia ana mo te aratohu ā-ringa, tūranga, tautuhi taputapu me
Ko etahi atu mahinga o nga taputapu miihini CNC. Ko tenei hua ka tango i te hangarau whakawhiti ahokore,
Te whakakore i te hononga waea waea tuku iho, te whakaiti i nga taputapu whakaheke i puta mai i nga taura,
te whakakore i nga ngoikoretanga o te toia taura, Nga otaota hinu, etc., a he waatea ake ki te
poka. Kei te whakamahia whānuitia i roto i nga taputapu miihini CNC penei i nga pokapū miihini miihini, hira
whiu poutū, Miihini tukatuka CNC, ka taea te whakauru ki te maha o nga CNC
Nga punaha kei te maakete, penei i te siemens, Mitsubishi, Kiriweti iri, Tukutahi me etahi atu punaha CNC
brands.

2.Nga waahanga Hua

1. Whakawhanake i te hangarau whakawhitiwhiti a 433MHZ, Te tawhiti o te mahi ahokore 80 mita;
2. Whakamahia te Mahi Aunoa Aunoa Aunoa, take 32 Nga huinga o nga Kaitoha Mamao Ahokore i te
taua wa kaore e pa ki a raatau ano;
3. Tautoko Peke Kore Tautoko, a i muri i te huringa o te ringaringa, te aukati ohorere
Ka whai mana tonu te paatene;
4. Tautoko 6 pātene ritenga, hurihuri io tohu tohu;
5. Tautokohia te mana 6-Axis, 7-12 Ka taea te whakarite i te mana Axis;
6. Ka tautokohia te 1x,10Whakaahua x, 100X te mana me te nui o te rahi o te 1000x;
7. Ka tautokohia te mahi takatika, Putanga Whakahoaho L0 Sianals. Axis Whiriwhiringa,tuku iho
a Enchor.;
8. Tautokohia te kowhiringa AXIS me te Whakawhiwhinga Whiriwhiringa Whiriwhiringa;
9. Tautokohia te Tautoko Momo-C, 5V-2A Whakahoahoa V-2A, Whakatakotoranga Pūhiko-i hangaia
14500/1100mAh.

3.Whakatakotoranga Hua

 

4.He kupu whakataki hua

 

Pukapuka：
Pātene aukati ①emergerger：
A, no te pehia te pātene aukati ohorere, Ko nga putanga ohorere e rua i te Io i runga i
Kua waihangatia te kaiwhiwhi, a he muhu katoa nga mahi a te ringaringa. I te wa ohorere
Ka tukuna te aukati, Ko te aukati ohorere i te putanga o te kaiwhiwhi i runga i te kaiwhiwhi kua kati, me nga kiri katoa
kua whakahokia mai nga mahi; a i muri i te huringa o te ringaringa, te aukati ohorere i te putanga
of the receiver is still valid when the emergency stop button is pressed.

Pātene ②nable:
Pēhi i tetahi o nga pihi e taea ai e nga taha e rua, me nga roopu e rua o te whakahohe i
Ko nga putanga i runga i te kaiwhiwhi ka hurihia. Tukuna te pātene Whakahohe me te Whakahohe i
ka tahuri te putanga. Hei taapiri, Me pēhi koe me te pupuri i te pātene Whakahohe i mua
Te huri i te paanga o te toki, ka ruru te ringaringa. Ka taea e tenei mahi
canceled through the configuration software.
③axis Swection Stoft (Huringa Poto):
Pēhi me te pupuri i te pātene Whakahohe ka huri i te huringa tohu toki ki te huri i te
Te neke neke i te tuaka. Hurihia tenei huringa mai i tetahi toki me
turn on the handwheel power.

Tuhinga o mua:
Pēhi me te pupuri i te pātene Whakahohe me te wiri i te kaitohu pulse ki te tuku mai i tetahi pense
signal to control the movement of the machine axis.

Tohu ⑤battery:
Ko te whakaaturanga mana wira, Ko nga tikanga kanapa katoa, Katoa te tikanga kaore
ka huri, kaore ranei he mana, Ko te paraire i mahue tuatahi, e whakaatu ana he iti rawa te mana,
please charge in time.
⑥signal rama:
Mena kei runga te rama tohu, Ko te tikanga kei te whakahaerehia te ringaringa me te tohu
tonu; Mena kua mutu te rama tohu, te tikanga kaore he mahi, kei te whakahaerehia ranei engari
the wireless signal is not connected.

5.Hoahoa Hua

 

6.Aratohu Whakauru Hua

6.1 Tikanga whakaurunga Hua
1. Tāutahia te kaiwhiwhi i roto i te rūnanga hiko ma te whakamahi i nga topenga ki te tuara, te whakauru ranei i roto
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Tirohia ki to maatau Kaipupuri Kaihoko, Whakatauritea me o taputapu taputapu, ka hono
the equipment to the receiver via cables.
3.I muri i te whakatau i te kaiwhiwhi, Ko te antena e rite ana ki te kaiwhiwhi me hono,
me te mutunga o waho o te antena me whakauru, ka whakanohohia ki waho o te rūnanga hiko. Ia
ka tūtohutia kia whakatakotoria ki runga i te tihi o te rūnanga hiko mo te tino tohu. Ko ia
Ka aukati kia waiho te antena e kore e whakakorehia, ka tuu ranei i te annanna i roto i te rūnanga hiko,
which may cause the signal to be unusable.
4. Rawa, Tahuri ki te huringa mana-ringa me te whakahaere i te miihini na
handwheel remote control.

6.2 Nga Taumata Whakauru

6.3 He hoahoa tohutoro a te kaiwhiwhi

7.Tohutohu Mahi Hua
1. Kei te kaha te miihini, Ka whakatauhia te kaiwhiwhi i runga i, Ko te kaiwhiwhi e mahi ana i te kaiwhiwhi
ka whiti te marama, Ko te waea ahokore ahokore kua whakauruhia te pākahiko, te taupoki pākahiko
kua herea, Ko te whakawhiti hiko hiko-hiko hiko hiko kua huri, me te
Kei runga te rama hiko-a-ringa;
2. Tīpakohia te toki whakarite: Pēhi me te pupuri i te pātene Whakahohe, Hurihia te kowhiringa axis
pana, ka tohua te toki e hiahia ana koe ki te whakahaere i runga;
3. Tīkina te whakanui: Pēhi me te pupuri i te pātene Whakahohe, Hurihia te whakawhiti whakanui,
ka tohua te taumata whakanui e hiahia ana koe;
4. Neke toki: Pēhi me te pupuri i te pātene Whakahohe, Tīpakohia te huringa whiriwhiri Axis, whiriwhiri
te whakawhiti whakanui, katahi ka hurihurihia te whakauru ki te huri i te tuaka neke pai
karaka me te aukati nekehanga neke atu;
5. Pēhi me te pupuri i tetahi pātene ritenga, me te pātene hāngai ki te putanga o te
ka tahuri te kaiwhiwhi. Tukuna te pihi hei whakaweto i te putanga;
6. Pēhi i te pātene aukati ohorere, Ko te aukati i te aukati i te putanga o te
Kua whakakorehia te kaiwhiwhi, Kua monokia te mahi a-ringa, Tukuna te aukati ohorere
pātene, Ko te putanga ohorere i tutakina te putanga, Na ka whakahokia mai te mahi a-ringa;
7. Mena kaore i te whakahaerehia te ringaringa mo te waa roa, Ka uru aunoa te moe
aratau ki te whakaiti i te kohi kaha. Ka whakamahia ano hoki, ka taea e te ringaringa
whakahohehia ma te pēhi i te pātene Whakahohe;
8. Mena kaore i te whakamahia te ringaringa mo te wa roa,Ka tūtohutia kia huri i te ringaringa
Tuhinga o mua, whakaweto i te mana ringaringa, and extend the battery life.

8.Whakaahuatanga Tauira Hua

① ：Ko te DWGP e tohu ana i te ahua ahua

② ：Ko nga tohu whakaputa whakaputa:
01: E whakaatu ana ko nga tohu whakaputa Pulsene he A me te B, Na ko te ngaohiko pilse he 5V; Mapu iaia
Te Rahi 100ppr;
02: E whakaatu ana ko nga tohu whakaputa Pulsene he A me te B, Na ko te ngaohiko pulse he 12v; Mapu iaia
Te rahinga 25ppr;
03: E whakaatu ana ko te tohu putanga Pulse he b、A-、Pē； Pulse Lolgal 5V; Pulse quantity 1
00Pō pppr;
04: E whakaatu ana i te putanga-tuwhera o te Taumata Taumata-iti, me nga tohu putanga Pulse o A me B; te
Te maha o nga pupuhi he 100ppr;05: E whakaatu ana i te putanga PNP nui-taumata, Nga tohu tohu Pulse
he a and b; Ko te rahinga pulse ko te 100ppr;
③ : tohu te maha o nga huringa whiriwhiri Axis, 6 tohu 6 pou tāwhirowhiro, 7 tohu 7 axis.
④ : Ko te tohu o te momo kowhiringa Whiriwhiringa Whiriwhiringa, He tohu tohu tohu-ki-tohu,
B e tohu ana i te tohu whakauru whakauru;

⑤ : tohu te momo tohu whakahoahoa,
He tohu tohu tohu-ki-tohu, B e tohu ana i te tohu whakauru whakauru;
⑥ : tohu te maha o nga paatene ritenga, 6 tohu 6 pātene ritenga;
⑦ : e tohu ana i te tuku mana mo te punaha pūnaha, 05 tohu mo te 5V mana mana,
me 24 represents 24V power supply.

9.Nga Whakawhiwhinga Hua

 

10. Tiaki me te tiaki

1. Whakamahia koa ki te taiao maroke i te pāmahana o te rūma me te pehanga kia whakawhānuitia tana mahi ratonga;
2. Tena ra, kaua e whakamahia te whakamahi i nga taiao kore penei i te ua me nga mirumiru wai hei whakawhānui i te koiora ratonga;
3. Kia mau ki te ahua o te ringaringa ma te horoi ki te whakawhānui i tana mahi ratonga;
4. Tena koa karohia te kotiti, hinga, tōpito, take. Hei aukati i te kino o nga waahanga tika o roto
Ko te hapa, he hapa tika ranei;
5. Mena kaore i whakamahia mo te wa roa, Tena koa rongoa te ringaringa i te waahi ma me te haumaru;
6.I te rokiroki me te waka, attention should be paid to moisture and shock resistance.

11.Nga korero mo te Haumaru

1. Tena panuihia nga tohutohu i mua i te whakamahi me te aukati i nga umanga kore ngaio mai i te mahi;
2. A, no te iti rawa te taumata pākahiko, Me utu e koe i te waa ki te karo i nga hapa i puta mai i te koretake
Te Pūhiko me te ngoikore ki te whakahaere i te ringaringa;

3. Mena e hiahiatia ana te whakatikatika, Tena whakapā atu ki te kaiwhakanao. Mena he kino te kino na te whakatikatika i a ia ano, the manufacturer will not provide warranty.

]]> Whakarei ake i te mpg ahokore – Hapanga 12 pou tāwhirowhiro https://www.wixhc.cn/product/enhanced-type-wireless-mpg-atwgp-12-axis Mon, 13 Nov 2023 08:06:21 +0000 https://www.wixhc.cn/?post_type=product&p=4453

Āhua：ATWGP-12

Pūnaha Whakatika: Nga punaha CNC katoa me te atanga a-ringa

Ko tenei hua he kaiwhakaputa a-ringa e whakamahia ana me nga taputapu miihini CNC. Kua whakamahia i roto i nga mara penei i nga taputapu miihini CNC, Taha CNC, pokapū miihini,Te whakairo CNC me nga Miihini Milding. Ka whakamahi tenei hua i te whakawhiti ahokore, Te whakakore i te hiahia mo nga hononga waea waea tawhito, te whakaiti i nga ngoikoretanga i puta mai i nga taura, Te whakakore i te toia taura, Te hinu me etahi atu paitini, me te mahi i nga mahi mahi ake. Kei roto i te kohinga hua te kaiwhiwhi me te ahokore hikohiko hiko. Ka hono te kaiwhiwhi ki nga taputapu CNC ma te taura whatunga, me te ringaringa hiko (Hoatu Generator a-ringa) hono hono me te whakawhitiwhiti korero me te kaiwhiwhi ma te hangarau whakawhiti ahokore. Ka mau te kaiwhakahaere i te ringaringa me te tango i nga hononga honohono o te waea puna me te neke noa. Mo te mira iti-nui, Taha CNC, Utauta miihini haere, Tapahi me etahi atu tono, it brings great convenience and improves work efficiency.

Ka tautoko i nga momo pūnaha penei i te siemens, Mitsubishi, Kiriweti iri, Taiwanxindai, Kaihona, He tao, Kupuzhong cnc, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Ma te whakamahi i te roopu ahokore a 433Mhz, Ko te tawhiti whakahaere ahokore ko 40 mita;
2. Whakamahihia te mahi tere aunoa me te whakamahi 32 huinga o nga ringaringa ahokore i te wa ano kaore e pa ki a raatau ano;
3. Ka tautokohia te pātene aukati ohorere me te 3 Pātene Pātene Pātene Pātene;
4. Ka tautoko i nga whiringa Axis maha o te 6-tuaka, 7-pou tāwhirowhiro, 8-pou tāwhirowhiro, 9-pou tāwhirowhiro, 10-Axis me te 12-tuaka, Ma te 3-tere me te 4-tere o te tohu me te tohu whakanui i te tautoko i nga momo tohu penei i te waehere Binal, tohu-ki-ira, Waehere Kerei, etc.;
5. Ka tautokohia e 5V te tohu Pulse rerekee, 24V Pulse tohu me etahi atu momo tohu Pulse;
6. Hoahoa Whakaora Poari, 2 Ka taea te whakamahi i nga pākahiko AA mo te neke atu i te 1 marama;
7. Ka tautokohia e ia te toronga toronga o-waho, He pai mo nga taiao whakaurunga taputapu miihini, te whakarite i te pumau tohu;

 

Rangi:
1. Te tohu tohu tohu:
Tohu tohu (mauī): Ko te maama tohu kei te wa tonu i te wa i whakahaerehia e te ringaringa, A kaore e marama ana kaore e mahi;
He iti te marama whakaohooho (tika): Ka iti rawa te mana o te pākahiko,ka tiaho te ara whakaohooho, ka noho tonu ranei;
2. Whakahohe pātene:
I muri i te pihi me te pupuri i te paatene Whakahohe, Ka whakahohehia te tohu Axis me nga tohu whakanui, Na ko te putanga whakapiri Pluse he tika;
3. Pātene ritenga:
He pātene kaore he mahi ka taea te whakahaere i te putanga whakawhiti tika i te kaiwhiwhi;

Comi1: Te Whakamutunga mo te Whakaaetanga Tohu Tohu Axis; Ka taea te hono atu ki te 0-24v Tohu Nui
Comi2: Tuhinga o mua 3 Nga Pene Pene Ritenga;

*Ko te kowhiringa a Axis me te whakanui i te mea ka tohua ma te raupaparorohiko, coding or sing-to-ira ranei, Tena koa toro atu ki nga kaimahi mo nga korero taipitopito

The final interpretation right of this product belongs to our company.
]]> Siemens i whakatapua ahokore hiko-hiko-a-rorohiko xwgp-ets https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Mei 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Kupu whakataki o te mana mamao

A.product compānuiinita
Siemens Te whakarite i nga waahanga-a-ringa Whakaako Ahuru Windows i nga waahanga e rua: ringaringa hiko + kaiwhiwhi;

B.Characteristis

*Tautoko Siemens PLC: S7-200 / -300 / -1200；Tautokohia te whakaaturanga-pono mo te punaha Siemens te whakarite uara；
*Kua tuwhera te tawhiti whakawhiti ahokore 40 mita, Te Hangarau Whakauru Aunoa Aunoa, Ka taea te whakamahi 32 Nga huinga taputapu i te wa ano;
*Ko te ringaringa hiko e whakahaeretia ana e 2 AA pākahiko ka taea te whakamahi mo te neke atu i te 30 ra;
*Ko te kaiwhiwhi e rite ana ki te antena o waho hei whakarei i te tohu me te ngawari ki te whakauru;
*Tautoko Haumaru Rorohiko Hiko: kotahi 100ppr hoteder 、Kotahi te 6-tere te huringa tuuturu 、 kotahi te huringa whakanui 3-tere;
*Ka tautokohia e te ringaringa hiko 6 pātene ritenga, Te korero ki te Siemens PLC Wāhitau, ka taea te whakamahere noa;

*6 Ka taea e nga paatene Rite te whakahaere 6 Nga Putanga Whakawhiti;
*Ko te mata whakaatu e whakaatu ana i te uara rehita rehita a PLC e tika ana i te waa tūturu, and supports 6-axis display of real-time coordinates.

2.Mara tono

Ko te mana whakahaere o te CNC Mamao e whakamahia whānuitia ana i roto i nga mara CNC penei i te punaha whakairo laser, Miihini mira cnc, Pokapū mīhini miihini cnc, taputapu miihini uaua, etc.

3. Kupu whakataki ki te parau tumu e mahi ana

1) Ka hono hono te ringaringa hiko ki te PLC ma te kaiwhiwhi Ethernet

A.Ko te ringaringa te tuku i nga raraunga matua te ahokore ki te kaiwhiwhi, Na ka tuhi te kaiwhiwhi i nga ki ma te taura i te punaha PLC PLC Stract DB; Ka panui te kaiwhiwhi i nga raraunga kia whakaatuhia mai i te waahanga DB kua tohua, katahi ka hoki mai i nga raraunga ki te mata whakaatu a-ringa. Ka taea e te kaiwhakamahi te whakarite i te wahitau turanga o te panui me te tuhi i te rohe DB i runga i te ringaringa, so that the handwheel can read and write the data in the DB area of the PLC.

pē. Ka tautokohia e te kaiwhiwhi te kawa S7 S7. E pa ana ki te PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

I te aratau tūmau, Ka whirihora te kaiwhakamahi i te PLC Pānuihia me te tuhi i te Wāhitau i roto i te raupaparorohiko WGP-ETS;Whakamahia te taputapu Whirihoranga Hononga PLC hei whirihora i te kaiwhiwhi ki te aratau kiritaki. I muri i te whirihoranga, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Tono motuhake

Te tono motuhake o te kaiwhiwhi a-ringa me te siemens plc s7-200:

he. Ko te paatene i runga i te ringaringa e pa ana ki te uara o te rohe o Bool i whakaritea e te kaiwhakamahi i te PSC. Mena ka peehia te paatene o te ringaringa, He pono te rohe o Bool e tika ana, a ka tukuna, he teka tena, Na ko te wahitau turanga o te rohe o te bool ka taea te whakarite i roto i te ringaringa;

pē. Ka taea e te ringaringa te panui te uara o te rohe DB i te PLC. Kotahi toki kei 4 Tuhinga o mua, me 6 Tuhinga o mua 24 kirita. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Whakataki Whakataki

5.Te whakamāramatanga o te kaiwhiwhi me te tepu coding

6.Te rahi

 

 

]]> Whakarei ake i te mpg ahokore – ATWGP-8/9/10 toki https://www.wixhc.cn/product/enhanced-type-wireless-mpg-atwgp-8-9-10-axis Sat, 02 Apr 2022 09:02:52 +0000 https://www.wixhc.cn/?post_type=product&p=4315

Pūnaha Whakatika: Nga punaha CNC katoa me te atanga a-ringa

 

 

 

 

 

 

 

Ko tenei hua he kaiwhakaputa a-ringa e whakamahia ana me nga taputapu miihini CNC. Kua whakamahia i roto i nga mara penei i nga taputapu miihini CNC, Taha CNC, pokapū miihini,Te whakairo CNC me nga Miihini Milding. Ka whakamahi tenei hua i te whakawhiti ahokore, Te whakakore i te hiahia mo nga hononga waea waea tawhito, te whakaiti i nga ngoikoretanga i puta mai i nga taura, Te whakakore i te toia taura, Te hinu me etahi atu paitini, me te mahi i nga mahi mahi ake. Kei roto i te kohinga hua te kaiwhiwhi me te ahokore hikohiko hiko. Ka hono te kaiwhiwhi ki nga taputapu CNC ma te taura whatunga, me te ringaringa hiko (Hoatu Generator a-ringa) hono hono me te whakawhitiwhiti korero me te kaiwhiwhi ma te hangarau whakawhiti ahokore. Ka mau te kaiwhakahaere i te ringaringa me te tango i nga hononga honohono o te waea puna me te neke noa. Mo te mira iti-nui, Taha CNC, Utauta miihini haere, Tapahi me etahi atu tono, it brings great convenience and improves work efficiency.

Ka tautoko i nga momo pūnaha penei i te siemens, Mitsubishi, Kiriweti iri, Taiwanxindai, Kaihona, He tao, Kupuzhong cnc, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Ma te whakamahi i te roopu ahokore a 433Mhz, Ko te tawhiti whakahaere ahokore ko 40 mita;
2. Whakamahihia te mahi tere aunoa me te whakamahi 32 huinga o nga ringaringa ahokore i te wa ano kaore e pa ki a raatau ano;
3. Ka tautokohia te pātene aukati ohorere me te 3 Pātene Pātene Pātene Pātene;
4. Ka tautoko i nga whiringa Axis maha o te 6-tuaka, 7-pou tāwhirowhiro, 8-pou tāwhirowhiro, 9-pou tāwhirowhiro, 10-Axis me te 12-tuaka, Ma te 3-tere me te 4-tere o te tohu me te tohu whakanui i te tautoko i nga momo tohu penei i te waehere Binal, tohu-ki-ira, Waehere Kerei, etc.;
5. Ka tautokohia e 5V te tohu Pulse rerekee, 24V Pulse tohu me etahi atu momo tohu Pulse;
6. Hoahoa Whakaora Poari, 2 Ka taea te whakamahi i nga pākahiko AA mo te neke atu i te 1 marama;
7. Ka tautokohia e ia te toronga toronga o-waho, He pai mo nga taiao whakaurunga taputapu miihini, te whakarite i te pumau tohu;

Rangi:
1. Te tohu tohu tohu:
Tohu tohu (mauī): Ko te maama tohu kei te wa tonu i te wa i whakahaerehia e te ringaringa, A kaore e marama ana kaore e mahi;
He iti te marama whakaohooho (tika): Ka iti rawa te mana o te pākahiko,ka tiaho te ara whakaohooho, ka noho tonu ranei;
2. Whakahohe pātene:
I muri i te pihi me te pupuri i te paatene Whakahohe, Ka whakahohehia te tohu Axis me nga tohu whakanui, Na ko te putanga whakapiri Pluse he tika;
3. Pātene ritenga:
He pātene kaore he mahi ka taea te whakahaere i te putanga whakawhiti tika i te kaiwhiwhi;

Comi1: Te Whakamutunga mo te Whakaaetanga Tohu Tohu Axis; Ka taea te hono atu ki te 0-24v Tohu Nui
Comi2: Tuhinga o mua 3 Nga Pene Pene Ritenga;

*Ko te kowhiringa a Axis me te whakanui i te mea ka tohua ma te raupaparorohiko, coding or sing-to-ira ranei, Tena koa toro atu ki nga kaimahi mo nga korero taipitopito

The final interpretation right of this product belongs to our company.
]]> Whakarei ake i te ahokore ahokore me te e-aukati ztwgp-3 https://www.wixhc.cn/product/enhanced-wireless-handwheel-with-e-stop-ztwgp-3 Fri, 18 Feb 2022 03:13:59 +0000 https://www.wixhc.cn/?post_type=product&p=4242

]]> Whakarei ake i te alfeles a-ahokore a-ahofeles a-ringa-a-ringa https://www.wixhc.cn/product/enhanced-wireless-manual-pulse-generator-handwheel-pendant-ztwgp Fri, 18 Feb 2022 03:09:02 +0000 https://www.wixhc.cn/?post_type=product&p=4234

]]>