Tono Motuhake mo nga Siemens – Hangarau wixhc https://www.wixhc.cn Kaiawhina Ahumahi Wed, 05 Nov 2025 06:21:59 +0000 mi hourly 1 https://wordpress.org/?v=6.8.3 He pukapuka tohutohu a-ringa hiko https://www.wixhc.cn/product/wired-electronic-handwheel-instruction-manual Wed, 05 Nov 2025 06:13:13 +0000 https://www.wixhc.cn/?post_type=product&p=4678

1. Kupu whakataki

Electronic handwheel is used for manual guidance, tūranga, Ko te whakahāngai taputapu, me etahi atu mahi i runga i nga taputapu miihini CNC. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, whakanui, buttons, andother signals through communication.
2.Nga waahanga mahi hua
1. Whakamahia he taura waka 6-matua mo te hononga, me te roa o te taura 10 meters.
2. Ka taea e te mata a-ringa te whakaatu i nga mahi a te punaha mahi, Nga whakaurunga miihini,Te reinga whangai, Axis Whiriwhiringa, whakanui, and other information.
3. Tautoko Peke Kore Tautoko, hurihuri io tohu tohu, and the hand wheel shutdown emergency stop is still valid.
4. Tautoko 6 pātene ritenga, Whakawhiti i nga tohu IO, and can output signals to the system through IO wiring or communication.
5. Tautoko 6 rānei 8 Te whakahaere Axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Tautoko 3 rānei 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Tautokohia te whakauru a Pulse, 100 Pulses / Tahuri, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.

 

3. Whakatakotoranga Hua
Handwheel working power supply voltage DC24V/1A
Receiver power supply voltage DC24V/1A
Receiver IO output load range DC24V
Hand wheel end cable length 10m
Receiver end cable length 1m
Receiver end network cable length 3m
Operating temperature -25℃<Whakaahua x<55℃
Anti-fall height 1m
Custom Button Quantity 6
Product dimensions 233*90.7*77.4（mm）

4.He kupu whakataki hua

Rangi:
Emergency stop button:
Pēhi i te pātene aukati ohorere, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, Ko te aukati ohorere i te putanga o te kaiwhiwhi i runga i te kaiwhiwhi kua kati, and all functions of the handwheel are restored.
② Screen display:

 

PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 pātene ritenga, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Pēhi me te pupuri i te pātene Whakahohe, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:

Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.

5. Whakaahua Whakauru Hua

6. Aratohu Whakauru Hua
6.1 Tikanga whakaurunga Hua
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Tirohia ki to maatau kaiwhiwhi i te hoahoa me te whakataurite i o taputapu taputapu-a-papa. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. I muri i te whakatika i te kaiwhiwhi, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.

 

6.2 Nga Taumata Whakauru

6.3 Installation dimensions of aviation plugs

6.4 He hoahoa tohutoro a te kaiwhiwhi
7.Tohutohu Mahi Hua

1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.

2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.

3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Tīkina te whakanui: Switch the magnification switch and select the magnification level you need.
7. Neke toki: Pēhi me te pupuri i te pātene Whakahohe, Tīpakohia te huringa whiriwhiri Axis, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Pēhi i te pātene aukati ohorere, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.Whakaahuatanga Tauira Hua

① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : tohu te maha o nga huringa whiriwhiri Axis, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.

9.Product trouble shooting

10.Whakatikatika
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Tena koa karohia te kotiti, hinga, tōpito, take. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Mena kaore i whakamahia mo te wa roa, please store the handwheel in a clean and safe place.During storage and transportation, attention should be paid to moisture and shock resistance.
11. Nga korero mo te Haumaru

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Mena e hiahiatia ana te whakatikatika, Tena whakapā atu ki te kaiwhakanao. Mena he kino te kino na te whakatikatika i a ia ano, Kaore te kaiwhakanao e tuku raihana

 

]]> Mamao Ahokore mo te Ahokore mo nga Taha Poari CNC https://www.wixhc.cn/product/vertical-lathe-wireless-electronic-handwheel-copy Wed, 03 Sep 2025 01:06:33 +0000 https://www.wixhc.cn/?post_type=product&p=4666

1.Kupu whakataki

The dedicated wireless remote contro for CNC vertical lathes is used for manual guidance, tūranga, tool setting, and other operations on CNC vertical machine tools. Ko tenei hua ka tango i te hangarau whakawhiti ahokore, eliminating the need for traditional spring wirae connections, te whakaiti i nga taputapu whakaheke i puta mai i nga taura, and eliminating the disadvantages of cable dragging and oil stains, making operation more convenient. It is widely applicable to various vertical lathes such as CNC vertical lathes, single-column vertical lathes, and double-column vertical lathes.It can also be adapted to a variety of CNC systems on the market, penei i te siemens,
Mitsubishi, Kiriweti iri, and Syntec.

2. Nga waahanga mahi hua

1. Adopting 433 MHz wireless communication technology, me te tawhiti mahi ahokore o 40 meters.
2.Adopting automatic frequency hopping function and using 32 sets of wireless remote controllers simultaneously, without affecting each other.
3. Tautoko Peke Kore Tautoko, switch IO signal output.
4. Tautoko 2 pātene whakarite, with switch-type IO signal output.
5. Tautoko -2 axis control.
6. Supports 3-level magnification control.
7. Support the enable button function, which can output on/off IO signals and control axis selection, multiplying factor, a Enchor.
8. Support for axis selection and magnification modification through software to change the encoding type.
9. Supports pulse encoder, with a specification of 100 pulses per revolution.
3. Whakatakotoranga Hua
Operating voltage and current of wireless remote
3V/14MA
Battery specifications 2 AA alkaline batteries, size 5
Low voltage alarm range of wireless remote < 2.3K
Receiver power supply voltage DC5V-24V/A
Receiver emergency stop output load range AC125V-1A/DC30V-2A
Receiver enable output load range
AC125V-1A/DC30V-2A
Receiver custom button output load range DC24V/50mA
Receiver axis selection output load range DC24V/50mA
Receiver magnification output load range DC24V/50mA
Transmission power of handheld terminal
15dBm
Receiver receiving sensitivity -100dBm
Wireless communication frequency 433MHz frequency band
Wireless communication distance Barrier free distance of 40 mita
Operation temperature -25℃ < Whakaahua x < 55℃
Anti fall height 1 (mīta)
Custom button quantity 2
4. He kupu whakataki hua



Pukapuka:

① Pulse encoder:
Pēhi me te pupuri i te pātene Whakahohe, shake the pulse encoder, emit a pulse signal,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: He iti te marama whakaohooho, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
Pēhi i te pātene aukati ohorere, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (Huringa Poto):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Whakaahua Whakauru Hua

6. Aratohu Whakauru Hua
6.1 Tikanga whakaurunga Hua

1. Tāutahia te kaiwhiwhi ki te rūnanga hiko na roto i te maaka i te taha o muri, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Tirohia ki to maatau kaiwhiwhi i te hoahoa me te whakataurite i o taputapu taputapu-a-papa. Connect the equipment to the receiver via cables.
3.After the receiver is properly fixed, Ko te antena e rite ana ki te kaiwhiwhi me hono, and the outer end of the antenna should be installed or placed outside the electrical cabinet. E taunaki ana kia whakatakotoria ki runga i te tihi o te rūnanga hiko mo te paanga tohu pai. It is prohibited to leave the antenna unconnected or place it inside the electrical cabinet, as this may result in the signal being unusable.
4. Rawa, turn on the power switch of the handwheel, and you can operate the machine remotely using the handwheel.

6.2 Nga Taumata Whakauru

6.3 He hoahoa tohutoro a te kaiwhiwhi

7. Tohutohu Mahi Hua
1. Power on the machine and the receiver. The receiver’s working indicator light flashes. Install the battery in the wireless electronic handwheel, secure the battery cover, me
turn on the power switch of the wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. Tīpakohia te toki whakarite: Pēhi me te pupuri i te pātene Whakahohe, toggle the axis selection switch, and select the axis you want to operate.
3. Tīkina te whakanui: Pēhi me te pupuri i te pātene Whakahohe, toggle the magnification switch,and select the desired magnification level.
4. Neke toki: Pēhi me te pupuri i te pātene Whakahohe, Tīpakohia te huringa whiriwhiri Axis, select the magnification switch, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. Pēhi me te pupuri i tetahi pātene ritenga, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. Pēhi i te pātene aukati ohorere, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled,release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
7. Mena kaore i te whakahaerehia te ringaringa mo te waa roa, it will automatically enter sleep mode to reduce power consumption. Ka whakamahia ano hoki, the handwheel can be activated by pressing the enable button.
8. Mena kaore i te whakamahia te ringaringa mo te wa roa, it is recommended to switch the handwheel shaft to the OFF position, whakaweto i te mana ringaringa, and extend the battery life.

8. Whakaahuatanga Tauira Hua

① :ZTWGP represents the appearance style
②：Ko nga tohu whakaputa whakaputa:
01: Indicates that the pulse output signal is A, B; Pulse Lolgal 5V; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; Pulse Lolgal 5V; pulse quantity 100PPR.
04：E whakaatu ana i te putanga-tuwhera o te Taumata Taumata-iti, me nga tohu putanga Pulse o A me B;The number of pulses is 100PPR.
05：E whakaatu ana i te putanga PNP nui-taumata, me nga tohu putanga Pulse o A me B; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 tohu 2 axes.
④：Represents the type of axis selection switch signal, He tohu tohu tohu-ki-tohu, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, He tohu tohu tohu-ki-tohu, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 tohu 2 custom buttons.
⑦：Represents the power supply for the system handwheel, me 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

10. Product maintenance

1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the appearance of the handwheel clean to extend its service life.
4. Tena koa karohia te kotiti, hinga, tōpito, take. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Mena kaore i whakamahia mo te wa roa, Tena koa rongoa te ringaringa i te waahi ma me te haumaru. I te rokiroki me te waka, attention should be paid to moisture and shock resistance.

11. Nga korero mo te Haumaru

1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery level is too low to avoid errors caused by insufficient battery power and inability to operate the handwheel.
3. Mena e hiahiatia ana te whakatikatika, Tena whakapā atu ki te kaiwhakanao. Mena he kino te kino na te whakatikatika i a ia ano, Kaore te kaiwhakanao e tuku raihana

]]> FANC Whakatakotoranga Ahokore Ahokore Ahurei https://www.wixhc.cn/product/fanuc-dedicated-wireless-electronic-handwheel Tue, 06 Mei 2025 07:26:48 +0000 https://www.wixhc.cn/?post_type=product&p=4626

1.Kupu whakataki

Ko te Haumaru Windows Ahokore e whakamahia ana mo te aratohu ā-ringa, tūranga, Ko te whakahāngai taputapu,me etahi atu mahi i runga i nga taputapu miihini CNC. Ko tenei hua ka tango i te hangarau whakawhiti ahokore, Te whakakore i te hononga waea waea tuku iho, te whakaiti i nga taputapu whakaheke i puta mai i nga taura, Te whakakore i nga ngoikoretanga o te tohenga taura me nga otaota hinu, me te mahi i nga mahi mahi ake. Ko tenei tauira o te ahorangi ahokore hikohiko ko te ringaringa i whakatapua mo te punaha fanucuc. Ka whakaatuhia te punaha pūnaha Fanc i te waa-i runga i te mata o te ringaringa i roto i te kawa IO-hono, me te tohu toki,whakanui, me nga tohu tohu e hono tika ana ki te punaha ma te kawa IN-Link, reducing wiring.

2. Nga waahanga Hua
1. Whakawhanake i te hangarau whakawhitiwhiti a 433MHZ, Te tawhiti o te mahi ahokore 40 mita;
2. Whakamahia te Mahi Aunoa Aunoa Aunoa, take 32 nga huinga o nga kaihoko ahokore ahokore i te wa ano kaore e pa ki a raatau ano;
3. Tautoko Peke Kore Tautoko, hurihuri io tohu tohu, hono ki te punaha ma roto i te waea;
4. Tautoko 4 pātene ritenga, hurihuri io tohu, tohu tohu ki te punaha ma te kawa ion-hononga;
5. Tautoko te pātene nekehanga tere + me te pātene -, Press me te pupuri i te pihi hei whakakapi i te ringaringa ki te neke i te miihini;
6. Tautokohia te mana 6-Axis, hurihuri io tohu, tohu tohu ki te punaha ma te kawa ion-hononga;
7. Tautoko 1x,10whakaahua x, 100X mana whakahaere . Tautoko Whakawhiti L0 tohu, me nga putanga e tohu ana ki te punaha ma te kawa io-hono;
8. Tautoko te mahi pātene, Tūhono ki te pūnaha mā te waea, me te whakauru i te whakauru i te wa ano;
9. Tautokohia te whakauru a Pulse, 100 Puta / porowhita, Uru ki te atanga a-ringa a te MPG-a-ringa ma te whakaputa i te tohu whakauru a Ab;

3.Whakatakotoranga Hua

4.Nga waahanga Hua

Pukapuka:
Pātene aukati ①emergerger:
Pēhi i te pātene aukati ohorere, Ko nga Putanga Tuarua e rua Io Io i runga i te kaiwhiwhi e honoa ana, a ko nga mahi a te ringaringa katoa he muhu ki te aukati i te aukati ohorere, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

Whakaaturanga ②Screen:

③custom pātene:
4 pātene ritenga, Ko ia pātene e rite ana ki te waahi putanga IO i runga i te kaiwhiwhi, hono ki te punaha ma te iolink. Te āhua nei, the ~ button is set as a high-speed button.
④axis Swection Stoft:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤shorct pātene:
Pēhi i te pātene poto "+" ki te neke whakamua i te miihini, ka pēhi i te pātene tapahi poto "-" ki te neke i te miihini. This can replace turning the hand wheel to move the machine.
Pātene ⑥nable:
Press me te pupuri i tetahi o nga pihi e taea ai e nga taha e rua me te wiri i te kaitohu pulse kia whai hua ai. Na ka tahuri nga roopu e rua o te IO i runga i te kaiwhiwhi. Release the enable button and the enable IO output is disconnected.
⑦ratio huri:
Switching the magnification switch can switch the magnification of handwheel control.
Tuhinga o mua:
Pēhi me te pupuri i te pātene Whakahohe me te wiri i te kaitohu pulse ki te tuku mai i tetahi pense
signal to control the movement of the machine axis.
Ka huri a ⑨power:
Handwheel power button.

5.Hoahoa Hua

6.Aratohu Whakauru Hua

6.1 Tikanga whakaurunga Hua

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Tirohia ki to maatau Kaipupuri Kaihoko, Whakatauritea me o taputapu taputapu, ka hono
the equipment to the receiver via cables.
3. I muri i te whakatau i te kaiwhiwhi, Ko te antena e rite ana ki te kaiwhiwhi me hono,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
E taunaki ana kia whakatakotoria ki runga i te tihi o te rūnanga hiko mo te paanga tohu pai. Ia
kua aukatia te waiho i te antena kaore i te whakakorehia, ka tuu ranei i te annanna i roto i te rūnanga hiko,
which may cause the signal to be unusable.
4.Rawa, Tahuri ki te huringa mana-ringa me te whakahaere i te miihini na
handwheel remote control.

6.2 Nga Taumata Whakauru

6.3 He hoahoa tohutoro a te kaiwhiwhi

7. Tiaki me te tiaki

1. Whakamahia koa ki te waahi maroke me te pāmahana noa me te pehanga hei whakawhānui i te
Te ora ratonga;
2. Tena koa kaua e whakamahia i roto i nga taiao koretake penei i te ua me te mirumiru wai hei whakawhānui atu
te ora ratonga;
3. Tena koa tirohia te ahua o te ringaringa ma te horoi ki te tuku i te ora ratonga;
4. Tena koa karohia te kotiti, hinga, tōpito, take. Hei aukati i te kino o nga waahanga tika
I roto i te ringaringa-a-ringa, he raru ranei;
5. Mena kaore i whakamahia mo te wa roa, Tena koa rongoa te ringaringa i te waahi ma me te haumaru;
6. Pay attention to moisture and shock during storage and transportation.

8. Nga korero mo te haumarutanga

1. Tena panuihia nga tohutohu i mua i te whakamahi. Kaore nga kaimahi-mahi e aukati i
operating.
2. Whakakapia koa te pākahiko i te wa e iti rawa te pākahiko ki te karo i nga hapa na te
insufficient power causing the handwheel to be unable to operate.
3. Mena e hiahiatia ana te whakatikatika, Tena whakapā atu ki te kaiwhakanao. Mena ka pakaru te kino i te whakatikatika i a ia ano,
the manufacturer will not provide warranty.

]]> Siemens i whakatapua ahokore hiko-hiko-a-rorohiko xwgp-ets https://www.wixhc.cn/product/siemens-dedicated-wireless-electronic-handwheel-xwgp-ets Thu, 26 Mei 2022 02:33:53 +0000 https://www.wixhc.cn/?post_type=product&p=4381

1.Kupu whakataki o te mana mamao

A.product compānuiinita
Siemens Te whakarite i nga waahanga-a-ringa Whakaako Ahuru Windows i nga waahanga e rua: ringaringa hiko + kaiwhiwhi;

B.Characteristis

*Tautoko Siemens PLC: S7-200 / -300 / -1200；Tautokohia te whakaaturanga-pono mo te punaha Siemens te whakarite uara；
*Kua tuwhera te tawhiti whakawhiti ahokore 40 mita, Te Hangarau Whakauru Aunoa Aunoa, Ka taea te whakamahi 32 Nga huinga taputapu i te wa ano;
*Ko te ringaringa hiko e whakahaeretia ana e 2 AA pākahiko ka taea te whakamahi mo te neke atu i te 30 ra;
*Ko te kaiwhiwhi e rite ana ki te antena o waho hei whakarei i te tohu me te ngawari ki te whakauru;
*Tautoko Haumaru Rorohiko Hiko: kotahi 100ppr hoteder 、Kotahi te 6-tere te huringa tuuturu 、 kotahi te huringa whakanui 3-tere;
*Ka tautokohia e te ringaringa hiko 6 pātene ritenga, Te korero ki te Siemens PLC Wāhitau, ka taea te whakamahere noa;

*6 Ka taea e nga paatene Rite te whakahaere 6 Nga Putanga Whakawhiti;
*Ko te mata whakaatu e whakaatu ana i te uara rehita rehita a PLC e tika ana i te waa tūturu, and supports 6-axis display of real-time coordinates.

2.Mara tono

Ko te mana whakahaere o te CNC Mamao e whakamahia whānuitia ana i roto i nga mara CNC penei i te punaha whakairo laser, Miihini mira cnc, Pokapū mīhini miihini cnc, taputapu miihini uaua, etc.

3. Kupu whakataki ki te parau tumu e mahi ana

1) Ka hono hono te ringaringa hiko ki te PLC ma te kaiwhiwhi Ethernet

A.Ko te ringaringa te tuku i nga raraunga matua te ahokore ki te kaiwhiwhi, Na ka tuhi te kaiwhiwhi i nga ki ma te taura i te punaha PLC PLC Stract DB; Ka panui te kaiwhiwhi i nga raraunga kia whakaatuhia mai i te waahanga DB kua tohua, katahi ka hoki mai i nga raraunga ki te mata whakaatu a-ringa. Ka taea e te kaiwhakamahi te whakarite i te wahitau turanga o te panui me te tuhi i te rohe DB i runga i te ringaringa, so that the handwheel can read and write the data in the DB area of the PLC.

pē. Ka tautokohia e te kaiwhiwhi te kawa S7 S7. E pa ana ki te PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

I te aratau tūmau, Ka whirihora te kaiwhakamahi i te PLC Pānuihia me te tuhi i te Wāhitau i roto i te raupaparorohiko WGP-ETS;Whakamahia te taputapu Whirihoranga Hononga PLC hei whirihora i te kaiwhiwhi ki te aratau kiritaki. I muri i te whirihoranga, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Tono motuhake

Te tono motuhake o te kaiwhiwhi a-ringa me te siemens plc s7-200:

he. Ko te paatene i runga i te ringaringa e pa ana ki te uara o te rohe o Bool i whakaritea e te kaiwhakamahi i te PSC. Mena ka peehia te paatene o te ringaringa, He pono te rohe o Bool e tika ana, a ka tukuna, he teka tena, Na ko te wahitau turanga o te rohe o te bool ka taea te whakarite i roto i te ringaringa;

pē. Ka taea e te ringaringa te panui te uara o te rohe DB i te PLC. Kotahi toki kei 4 Tuhinga o mua, me 6 Tuhinga o mua 24 kirita. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Whakataki Whakataki

5.Te whakamāramatanga o te kaiwhiwhi me te tepu coding

6.Te rahi

 

 

]]>