The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Product functional features

1. Adopting 433MHz wireless communication technology, with a wireless operating distance of 100 meters.
2. Adopt automatic frequency hopping function and use 32 sets of wireless remote controllers
simultaneously, without affecting each other.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:ഷാങ്ഹായ് സീലിൻ, ഫുജി, Huichuan, സോങ്ചെൻ, INVT, and . For brands
that are not compatible, please contact us for customization.
4. പിന്തുണ വേഗത നിയന്ത്രണം, ആരംഭം, and current reading of large motor frequency converters.
5. പിന്തുണ ഇടത്, വലത് ട്രാക്ക് ഫ്രീക്വൻസി കൺവെർട്ടർ സ്പീഡ് റെഗുലേഷൻ, ആരംഭം, മുന്വശത്തുള്ള, പിന്നിലുള്ള, left and right control.
6. മെഷീൻ നടക്കാൻ ഇടത്, വലത് ട്രാക്ക് ഫ്രീക്വൻസി കൺവെർട്ടറുകളുടെ ലീനിയർ തിരുത്തൽ പിന്തുണയ്ക്കുന്നു a
straight line.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. ഉൽപ്പന്ന സവിശേഷതകൾ

4. Product Function Introduction

കുറിപ്പുകൾ:
①സ്ക്രീൻ ഡിസ്പ്ലേ:

②മോഡ് സ്വിച്ച്:

③Enable:
കോമ്പിനേഷൻ ബട്ടണുകൾ, ചില പ്രവർത്തനങ്ങൾക്ക് പ്രവർത്തനത്തിനായി പ്രവർത്തനക്ഷമമാക്കുക ബട്ടൺ അമർത്തിപ്പിടിക്കേണ്ടത് ആവശ്യമാണ്,see the instructions for each switch for details.
④Large motor switch:
3-സ്പീഡ് റീസെറ്റ് സ്വിച്ച് ഉപയോഗിക്കുന്നു, ഈ സ്വിച്ച് വലിക്കുന്നതിലൂടെ വലിയ മോട്ടറിൻ്റെ മുന്നോട്ടും പിന്നോട്ടും ഭ്രമണം നിയന്ത്രിക്കാനാകും. അത് റിലീസ് ചെയ്തതിന് ശേഷം, സംസ്ഥാനം നിലനിൽക്കും, കൂടാതെ സ്ക്രീനിൽ അനുബന്ധ ഡിസ്പ്ലേകൾ ഉണ്ടാകും. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤ചെറിയ മോട്ടോർ ഫോർവേഡ്/റിവേഴ്സ് സ്വിച്ച്:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
ഒരു മൾട്ടി ടേൺ എൻകോഡർ നോബ് ഉപയോഗിക്കുന്നു, press the enable button, turn the knob right, and display the straight line correction: Df: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 യൂണിറ്റ്; ഇടത്തേക്കുള്ള നോബ് തിരിയുക, നേർരേഖ തിരുത്തൽ പ്രദർശനം: Df: On the right, every turn of the knob increases by 1 യൂണിറ്റ്, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
3-സ്പീഡ് റീസെറ്റ് സ്വിച്ച് ഉപയോഗിക്കുന്നു, സ്വമേധയാ പ്രവർത്തിപ്പിക്കുമ്പോൾ, ചെറിയ മോട്ടോർ ഇടത്തോട്ടോ വലത്തോട്ടോ തിരിയാൻ നിയന്ത്രിക്കാനാകും. ഒരിക്കൽ പുറത്തിറങ്ങി, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
⑧ വലിയ മോട്ടോർ സ്പീഡ് നിയന്ത്രണം:
ഒരു മൾട്ടി ടേൺ എൻകോഡർ നോബ് ഉപയോഗിക്കുന്നു, rotating 1 ഓരോ തവണയും ഗ്രിഡ്, വലിയ മോട്ടറിൻ്റെ വേഗത മൂല്യം ഏകദേശം മാറുന്നു 0.2 യൂണിറ്റുകൾ. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
ഒരു മൾട്ടി ടേൺ എൻകോഡർ നോബ് ഉപയോഗിക്കുന്നു, മാനുവൽ മോഡിൽ, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 യൂണിറ്റുകൾ, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 യൂണിറ്റുകൾ. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.

5. ഉൽപ്പന്ന ആക്സസറി ഡയഗ്രം

6. ഉൽപ്പന്ന ഇൻസ്റ്റാളേഷൻ ഗൈഡ്
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the equipment to the receiver through wires.
3. After fixing the receiver, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. മികച്ച സിഗ്നൽ ഇഫക്റ്റിനായി ഇത് ഇലക്ട്രിക്കൽ കാബിനറ്റിൻ്റെ മുകളിൽ സ്ഥാപിക്കാൻ ശുപാർശ ചെയ്യുന്നു. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. ഒടുവിൽ, install the battery on the remote control, ബാറ്ററി കവർ ശക്തമാക്കുക, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 റിസീവർ ഇൻസ്റ്റാളേഷൻ അളവുകൾ

6.3 റിസീവർ വയറിംഗ് റഫറൻസ് ഡയഗ്രം

7. ഉൽപ്പന്ന പ്രവർത്തന നിർദ്ദേശങ്ങൾ
7.1 റിമോട്ട് കൺട്രോൾ പാരാമീറ്റർ ക്രമീകരണങ്ങൾ
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, ചെറിയ മോട്ടറിൻ്റെ വേഗത ക്രമീകരിക്കുക 25 on both sides, അല്ലെങ്കിൽ 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 തവണ;
ഉപയോഗിക്കുക “ചെറിയ മോട്ടോർ സ്പീഡ് നിയന്ത്രണം” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, പേജ് അവസാനം വരെ തിരിക്കുക,select “Save” to exit, and press the enable button to exit the menu;
പരാമീറ്ററുകൾ താഴെ പറയുന്നവയാണ്:
പരമാവധി കറൻ്റ്: feedback range of large motor current, set range 15-200A, സ്ഥിരസ്ഥിതി 100;
വേഗത നിയന്ത്രണ പാരാമീറ്ററുകൾ: Automatic mode, small motor automatically accelerates faster or slower,ചെറുത് വേഗത്തിൽ, set range 200-1500, സ്ഥിരസ്ഥിതി 800;
ഡിസെലറേഷൻ പാരാമീറ്റർ: Set the upper limit that allows the motor speed to change. ഈ മൂല്യത്തിനപ്പുറം കറൻ്റ് മാറുമ്പോൾ, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, with a range of 05-12 and a default of 06;
ത്വരണം a1: The larger the motor speed, the faster it increases, with a range of 00-06 and a default of 01;
തളർച്ച a2: The larger the motor speed, the faster it decreases, with a range of 00-06 and a default of 02;
വേഗത നിയന്ത്രണം പ്രവർത്തനക്ഷമമാക്കുക: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Start self-locking: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, default 01
Maximum walking: maximum speed of left and right motors, പരിധി 10-100, സ്ഥിരസ്ഥിതി 50;
കറൻ്റ് മുറിക്കുന്നു: maximum cutting current, displayed on the screen as IC value, പരിധി 15-160, default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
സ്ഥിര വേഗത പരിധി: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatic mode: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 to 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
പരമാവധി ഹോസ്റ്റ്: maximum speed of the large motor, പരിധി 10-100, സ്ഥിരസ്ഥിതി 50;
Mbus equipment (നിർബന്ധമാണ്): Selection of large motor frequency converter model, പരിധി 00-03, സ്ഥിരസ്ഥിതി 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, റോബിക്കൺ)
SBUS ഉപകരണങ്ങൾ (നിർബന്ധമാണ്): ചെറിയ മോട്ടോർ ഫ്രീക്വൻസി കൺവെർട്ടർ മോഡൽ തിരഞ്ഞെടുക്കൽ, പരിധി 00-05, സ്ഥിരസ്ഥിതി 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, റോബിക്കൺ)

04-അഞ്ചുണ്ട 05-ഒന്നുമില്ല

7.2 ഫ്രീക്വൻസി കൺവെർട്ടറിൻ്റെ പാരാമീറ്റർ ക്രമീകരണം
1. കമാൻഡ് ഉറവിട തിരഞ്ഞെടുപ്പ്: ആശയവിനിമയ കമാൻഡ് ചാനൽ
2. പ്രധാന ആവൃത്തി ഉറവിട തിരഞ്ഞെടുപ്പ്: ആശയവിനിമയം നൽകി
3. ബൗഡ് നിരക്ക്: 19200
4. ഡാറ്റ ഫോർമാറ്റ്: പരിശോധനയില്ല, ഡാറ്റ ഫോർമാറ്റ്<8-N-1>
5. പ്രാദേശിക വിലാസം: ഇടത് ഫ്രീക്വൻസി കൺവെർട്ടർ സജ്ജമാക്കുക 1, ശരിയായ ഫ്രീക്വൻസി കൺവെർട്ടർ 2, and
the large motor frequency converter to 3
7.3 റിമോട്ട് കൺട്രോൾ ഓപ്പറേഷൻ നിർദ്ദേശങ്ങൾ
1. യന്ത്രം ഓൺ ചെയ്യുക, റിമോട്ട് കൺട്രോൾ ഓണാക്കുക, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (മെഷീൻ നിർമ്മാതാവ് ഇത് ഇതിനകം സജ്ജമാക്കിയിട്ടുണ്ടെങ്കിൽ ഈ ഘട്ടം ഒഴിവാക്കുക);
2. ഫ്രീക്വൻസി കൺവെർട്ടറിൻ്റെ പാരാമീറ്ററുകൾ സജ്ജമാക്കുക (skip this step if the machine manufacturer
has already set it);
3. റിമോട്ട് കൺട്രോൾ മാനുവൽ മോഡിലേക്ക് സജ്ജമാക്കുക, and then use the remote control to move the machine to
the working position;
4. മാനുവൽ മോഡിൽ, set the cutting current of the large motor to IC and the speed of the large motor
5. ഓട്ടോമാറ്റിക് മോഡിലേക്ക് മാറി ചെറിയ മോട്ടോറിനായി കട്ടിംഗ് സ്പീഡ് ലിമിറ്റ് എഫ് മൂല്യം സജ്ജമാക്കുക;
6. ഓട്ടോമാറ്റിക് മോഡിൽ, വലിയ മോട്ടോർ ആരംഭിക്കാൻ വലിയ മോട്ടോർ സ്വിച്ച് ഫോർവേഡിലേക്ക് തിരിക്കുക, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.ഉൽപ്പന്ന ട്രബിൾഷൂട്ടിംഗ്

9.മെയിൻ്റനൻസ്
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. വളരെക്കാലം ഉപയോഗിച്ചില്ലെങ്കിൽ, please remove the battery and store the remote control and battery in a clean
and safe place.
6.സംഭരണത്തിലും ഗതാഗതത്തിലും, attention should be paid to moisture and shock resistance.

10. സുരക്ഷാ വിവരങ്ങൾ
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. അറ്റകുറ്റപ്പണി ആവശ്യമെങ്കിൽ, ദയവായി നിർമ്മാതാവിനെ ബന്ധപ്പെടുക. കേടുപാടുകൾ സംഭവിക്കുന്നത് സ്വയം നന്നാക്കുന്നതിലൂടെയാണെങ്കിൽ, the manufacturer
will not provide warranty.

മാതൃക: DH01R-4W-26K

Applicable equipment:various industrial equipment

2.ഉൽപ്പന്ന ആക്സസറികളുടെ ഡയഗ്രം

Note: You can choose one of the three antennas. The suction cup antenna is standard by default.

3.Product model description

Note:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, it means without emergency stop output.

②If there is no analog output, there is no need to remark 0W or 0R; the analogquantities W1, W2, W3, and W4 default to 0-10V analog voltage output; at the same time, W1 and W2 can be expanded to 2 isolated digital potentiometer outputs, with a range of 0 -5K ohms, ½ watt; resolution: 20 ohms. The two digital potentials can be used to control the welding current and welding voltage of the welding machine. If the digital potentiometer output is required, user notes are required.

④Analog input, ranging from 1 to 2, indicating that there are 1 to 2 അനലോഗ് ഇൻപുട്ട്(maximum 2 ചാനലുകൾ); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5വി, the user can also note as 4-20 mA or 0-10V, മുതലായവ) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)

These two analog quantities can be used as displays for welding current and welding voltage.

4.ഫീച്ചറുകൾ

1）Maximum 26 റിലേ f ട്ട്പുട്ടുകൾ;
2）Maximum 4 അനലോഗ് 0-10 വി .ട്ട്പുട്ടിന്റെ ചാനലുകൾ (പ്രദർശന ശ്രേണി ഇഷ്ടാനുസൃതമാക്കാൻ കഴിയും): പിന്തുണ 2 വിപുലീകൃത ഒറ്റപ്പെട്ട ഡിജിറ്റൽ പൊട്ടൻയോമീറ്റർ .ട്ട്പുട്ടിന്റെ ചാനലുകൾ;
3）2 analog inputs; വിദൂര നിയന്ത്രണത്തിൽ പ്രദർശിപ്പിക്കും, ഡിസ്പ്ലേ ശ്രേണി ഇച്ഛാനുസൃതമാക്കാൻ കഴിയും
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 എഎ ബാറ്ററികൾ, low power consumption design;
6） Wireless operation distance is 200 മീറ്റർ;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.

5.Remote control switch description

6.Display content introduction

W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)

Low voltage: The remote control battery is too low, please replace the battery.

Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.

7.Remote control function operation instructions

1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, പവർ സ്വിച്ച് ഓണാക്കുക, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 to 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 to 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 to 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 to 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;

8.Remote control electrical characteristics

9.Remote control size

The final interpretation right of this product belongs only to our company.

മാതൃക: DH12S-P6S

Applicable equipment:wire saw/blade saw machine

2.ഉൽപ്പന്ന ആക്സസറികളുടെ ഡയഗ്രം

Note: You can choose one of the three antennas. The suction cup antenna is standard by default.

3.Remote control switch description

4.Displaycontent introduction

Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(parameters adjustable)
Automatic cutting main motor setting current: Setting: 28 (parameters adjustable)
Swing arm motor speed: Swing: 0-50

Low voltage: The remote control battery is too low, please replace the battery.

Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.

5.Remote control function operation instructions

1）Turn on the remote control

When the receiver is powered on, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; install two AA batteries in the remote control, പവർ സ്വിച്ച് ഓണാക്കുക, and the display will show the motor speed, indicating successful startup.

2）Large motor and speed regulation/Main motor and speed regulation

Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to forward, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, turn the “Forward/Reverse” switch to reverse, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;

3）Traveling motor

Press and hold “Speed Adjustment Enable”, turn the “Forward/Reverse” switch to forward or backward, and the walking motor will move at a high speed of 50;

4）Swing arm motor and speed regulation

Turn the “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;

Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;

5）Travel motor speed limit adjustment

Press and hold the “speed adjustment enable” button and rotate the “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “forward/reverse” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (users are prohibited from modifying it without permission)

Enter the parameter menu:മാനുവൽ മോഡിൽ, when the main motor speed is 0, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enterthe parameter menu;
Exit the parameter menu: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, സ്ഥിരസ്ഥിതി 800, unit milli second,modification is prohibited;
ഡിസെലറേഷൻ പാരാമീറ്റർ: When the cutting current change value exceeds this value, rapid deceleration begins, unit Ampere;
ത്വരണം a1: When the cutting current is lower than the set cutting current, the speed value increased by each acceleration of the walking motor;
തളർച്ച a2: When the cutting current is higher than the set cutting current, the speed value reduced by each deceleration of the walking motor;
Swing arm current: Default value, modification is prohibited;
Stop time: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, modification is prohibited;
പരമാവധി കറൻ്റ്: The range of main motor feedback current, unit Ampere;
പരമാവധി ഹോസ്റ്റ്: Remote control main motor speed adjustment display range;
Maximum walking: Invalid parameter;
വേഗത പരിധി ഓഫ്‌സെറ്റ്: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Automatic cutting, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;യൂണിറ്റ്: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;

6.Remote control electrical characteristics

7.Remote control size

The final interpretation right of this product belongs only to our company.

മാതൃക: DH12S-LD

Applicable equipment:crawler wire saw machine

ഉൽപ്പന്ന ആക്സസറികളുടെ ഡയഗ്രം

Note: You can choose one of the three antennas. The suction cup antenna is standard by default.

Remote control switch description

Displaycontent introduction

Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (parameters adjustable)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)

Low voltage: The remote control battery is too low, please replace the battery.

Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.

Remote control function operation instructions

1.Turn on the remote control

When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, പവർ സ്വിച്ച് ഓണാക്കുക, andthe display will show the motor speed, indicating successful startup.

2.Large motor and speed regulation

Turn the “forward/reverse” switch to forward, the receiver’s large motor will turn on, and the display will show forward

Turn the “forward/reverse” switch to reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse

Rotate the “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;

3.Small motor and speed regulation

Move the “forward/reverse” switch to forward, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward

Turn the “Forward/Reverse” switch to reverse, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse

4.Turn left and right

Turn the “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left

Turn the “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right

5.Turn in place

മാനുവൽ മോഡിൽ:
Turn left in place: Press and hold the “Enable” button, turn the “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;

Turn right in place: Press and hold the “Enable” button, turn the “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;

6.Small motor speed limit adjustment

ഓട്ടോമാറ്റിക് മോഡിൽ: press and hold the “Enable” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;

7.Automatic cutting

The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;

8. Straight line correction

When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: മാനുവൽ മോഡിൽ, press and hold the “Enable” button and rotate the “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 to 90; correction voltage of one correction unit is about 0.02V;

9. Parameter menu (users are prohibited from modifying it without permission)

Some functions of the remote control can be adjusted through parameters. മാനുവൽ മോഡിൽ, when the small motor speed S2 is 10, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enter the parameter menu;
Exit the parameter menu: choose to save or not save, then press the enable button to confirm the exit;
പരമാവധി കറൻ്റ്: the operating rated current of the cutting motor is 80% of this currentt;
വേഗത നിയന്ത്രണ പാരാമീറ്ററുകൾ: automatic cutting control parameters, സ്ഥിരസ്ഥിതി 800, modification is prohibited;
ഡിസെലറേഷൻ പാരാമീറ്റർ: automatic cutting control parameter. When the cutting current change value exceeds this value,deceleration begins.
ത്വരണം a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
തളർച്ച a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maximum walking: the maximum speed of the small motor.
കറൻ്റ് മുറിക്കുന്നു: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
സ്ഥിര വേഗത പരിധി: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
വേഗത പരിധി ഓഫ്‌സെറ്റ്: the maximum speed of the small motor during automatic cutting.
പരമാവധി ഹോസ്റ്റ്: maximum speed of large motor.

Remote control electrical characteristics

Remote control size

The final interpretation right of this product belongs only to our company.

മാതൃക：ATWGP-12

Adaptation system: all CNC systems with handwheel interface

This product is a manual pulse generator used with CNC machine tools. It has beenwidely used in fields such as CNC machine tools, സിഎൻസി ലെഥങ്ങൾ, machining centers,CNC engraving and milling machines. This product uses wireless transmissiontechnology, eliminating the need for traditional spring wire connections, reducingequipment failures caused by cables, eliminating cable drag, oil and other contamination, and making operation more convenient. The product package includes the receiver and wireless electronic handwheel. The receiver is connected to the CNC equipment through a network cable, and the electronic handwheel (hand pulse generator) is connected and communicated with the receiver through wireless transmission technology. The operator holds the handwheel and can get rid of the connection constraints of the spring wire and move freely. For large-scale gantry milling, സിഎൻസി ലെഥങ്ങൾ, traveling machine tools, മുറിക്കൽ, മറ്റ് അപ്ലിക്കേഷനുകൾ, it brings great convenience and improves work efficiency.

Supports various system brands such as Siemens, മിത്സുബിഷി, Fanuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Using the 433MHZ wireless communication frequency band, the wireless operating distance is 40 മീറ്റർ;
2. Adopt automatic frequency hopping function and use 32 sets of wireless handwheels at the same time without affecting each other;
3. Supports emergency stop button and 3 custom button switch outputs;
4. Supports multiple axis selections of 6-axis, 7-അച്ചുതണ്ട്, 8-അച്ചുതണ്ട്, 9-അച്ചുതണ്ട്, 10-axis and 12-axis, with 3-speed and 4-speed magnification.Axis selection and magnification switches support various signal types such as binary coding, point-to-point, gray code, മുതലായവ;
5. Supports 5V differential pulse signal, 24V pulse signal and other pulse signal types;
6. കുറഞ്ഞ പവർ ഉപഭോഗ രൂപകൽപ്പന, 2 AA batteries can be used for more than 1 month;
7. Supports external extension antenna, suitable for various machine tool installation environments, ensuring signal stability;

Note:
1. Status indicator light:
Signal light (വിട്ടുപോയി): The signal light is always on when the handwheelis operated, and does not light up when not operating;
Low voltage alarm light (ശരിയാണ്): When the battery power is too low,the alarm light flashes or stays on;
2. Enable button:
After pressing and holding the enable button, the axis selection and magnification signals are activated, and the pulse encoder output is valid;
3. Custom button:
A button without any function can control a corresponding switch output on the receiver;

COM1: Common terminal for axis selection magnification signal output; can be connected to 0-24V public signal
COM2: Common terminal of 3 custom button outputs;

*Axis selection and magnification can be selected through software, coding or point-to-point, please consult the staff for details

The final interpretation right of this product belongs to our company.

Adaptation system: all CNC systems with handwheel interface

This product is a manual pulse generator used with CNC machine tools. It has beenwidely used in fields such as CNC machine tools, സിഎൻസി ലെഥങ്ങൾ, machining centers,CNC engraving and milling machines. This product uses wireless transmissiontechnology, eliminating the need for traditional spring wire connections, reducingequipment failures caused by cables, eliminating cable drag, oil and other contamination, and making operation more convenient. The product package includes the receiver and wireless electronic handwheel. The receiver is connected to the CNC equipment through a network cable, and the electronic handwheel (hand pulse generator) is connected and communicated with the receiver through wireless transmission technology. The operator holds the handwheel and can get rid of the connection constraints of the spring wire and move freely. For large-scale gantry milling, സിഎൻസി ലെഥങ്ങൾ, traveling machine tools, മുറിക്കൽ, മറ്റ് അപ്ലിക്കേഷനുകൾ, it brings great convenience and improves work efficiency.

Supports various system brands such as Siemens, മിത്സുബിഷി, Fanuc, TaiwanXindai, Baoyuan, Fagor, Huazhong CNC, Guangzhou CNC, and otherCNC systemsthat support handwheel interfaces.

1. Using the 433MHZ wireless communication frequency band, the wireless operating distance is 40 മീറ്റർ;
2. Adopt automatic frequency hopping function and use 32 sets of wireless handwheels at the same time without affecting each other;
3. Supports emergency stop button and 3 custom button switch outputs;
4. Supports multiple axis selections of 6-axis, 7-അച്ചുതണ്ട്, 8-അച്ചുതണ്ട്, 9-അച്ചുതണ്ട്, 10-axis and 12-axis, with 3-speed and 4-speed magnification.Axis selection and magnification switches support various signal types such as binary coding, point-to-point, gray code, മുതലായവ;
5. Supports 5V differential pulse signal, 24V pulse signal and other pulse signal types;
6. കുറഞ്ഞ പവർ ഉപഭോഗ രൂപകൽപ്പന, 2 AA batteries can be used for more than 1 month;
7. Supports external extension antenna, suitable for various machine tool installation environments, ensuring signal stability;

Note:
1. Status indicator light:
Signal light (വിട്ടുപോയി): The signal light is always on when the handwheelis operated, and does not light up when not operating;
Low voltage alarm light (ശരിയാണ്): When the battery power is too low,the alarm light flashes or stays on;
2. Enable button:
After pressing and holding the enable button, the axis selection and magnification signals are activated, and the pulse encoder output is valid;
3. Custom button:
A button without any function can control a corresponding switch output on the receiver;

COM1: Common terminal for axis selection magnification signal output; can be connected to 0-24V public signal
COM2: Common terminal of 3 custom button outputs;

*Axis selection and magnification can be selected through software, coding or point-to-point, please consult the staff for details

The final interpretation right of this product belongs to our company.