Хүсэлт:Crawler Work Worked машинд тусгайлан ашигладаг
1.Supports automatic cutting mode, automatically adjusts the walking speed of the small motor according to the large motor current, and achieves automatic cutting control.
2.Саад бэрхшээлгүй дамжуулах зай нь 200 Бүт доод.
3. Supports dual speed regulation for large motors and small motors.
4. Support small motor turning in place.
5. Supports left and right wheel small motor linear correction.
Загвар: DH12S-LD
Хариуцлагатай тоног төхөөрөмж:crawler wire saw machine
Мөнгөн дэвсгэрт: Та гурван антенны аль нэгийг нь сонгож болно. Сорох аяга антен нь анхдагчаар стандарт юм.
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (Параметрүүдийг тохируулж болно)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)
Бага хүчдэл: Алсын удирдлагатай батерей хэт бага байна, Батерейгаа солино уу.
Сүлжээ унав: Утасгүй дохио тасалдсан байна. Хүлээн авагчийн хүчийг шалгана уу, дахин асаах, алсын удирдлага руу дахин эхлүүлнэ үү.
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, Цахилгаан шилжүүлэгчийг асаана уу, andthe display will show the motor speed, Амжилттай эхлэлийг илтгэнэ.
2.Large motor and speed regulation
Эргэж “Урагшлах / урвуу” Урагш руу шилжих, the receiver’s large motor will turn on, and the display will show forward
Эргэж “Урагшлах / урвуу” урвуу руу шилжих, the large motor of the receiver will turn on in reverse, and the display will show reverse
Эргүүлэх “large motor speed adjustment” knob to adjust the receiver’s large motor speed adjustment output voltage 0-10V;
3.Small motor and speed regulation
Move the “Урагшлах / урвуу” Урагш руу шилжих, the left wheel forward and right wheel forward of the receiver are turned on, and the display shows forward
Эргэж “Урагшлах / урвуу” урвуу руу шилжих, the left wheel reverse and right wheel reverse of the receiver are turned on, and the display shows reverse
4.Turn left and right
Эргэж “Left/Right” switch to left, the receiver’s right wheel will forward and turn on,and the display will show left
Эргэж “turn left/right” switch to turn right, the left wheel of the receiver will forward and turn on, and the display will show turn right
5.Turn in place
Гараар горимд:
Turn left in place: Дээр дараад барина уу “Enable” button, эргэж “Left/Right Turn” switch to left, the left wheel backward and right wheel forward of the receiver are turned on,and start turning left in place;
Turn right in place: Дээр дараад барина уу “Enable” button, эргэж “Left/Right Turn” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
In automatic mode: press and hold the “Enable” товчлуурыг нь эргүүлээд эргүүлнэ “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.Автомат зүсгээ
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: Гараар горимд, press and hold the “Enable” товчлуурыг нь эргүүлээд эргүүлнэ “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 to 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (хэрэглэгчид үүнийг зөвшөөрөлгүйгээр өөрчлөхийг хориглоно)
Some functions of the remote control can be adjusted through parameters. Гараар горимд, when the small motor speed S2 is 10, урагшлах / урвуу шилжүүлэгчийг дараалан гурван удаа дарна уу, and then push it down three times in a row to enter the parameter menu;
Параметр цэсээс гарна уу: choose to save or not save, then press the enable button to confirm the exit;
Хамгийн сайн одоогийн: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, үл хүрэлцэх 800, Өөрчлөлтийг хориглоно;
Хэвлэгийн параметр: automatic cutting control parameter. Тайрах одоогийн өөрчлөлтийн утга нь энэ утгаас давсан тохиолдолд,deceleration begins.
Хурдатгал a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Repelation A2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Хамгийн их алхах: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Хурдны хязгаарлалт офсет: the maximum speed of the small motor during automatic cutting.
Хамгийн их хост: maximum speed of large motor.
Энэ бүтээгдэхүүний эцсийн тайлбарыг зөвхөн манай компанид багтаасан болно.
